Industrial utilization of arsenic-containing gold dressing tailings as pellet prepared by straight grate process

The utilization of arsenic-containing gold dressing tailings is an urgent issue faced by gold production companies worldwide.The thermodynamic analysis results indicate that ferrous arsenate(FeAsO_(4)),pyrite(FeS_(2))and sodium cyanide(NaCN)in the arsenic-containing gold metallurgical tailings can be effectively removed using straight grate process,and the removal of pyrite and sodium cyanide is basically completed during the preheating stage,while the removal of ferrous arsenate requires the roasting stage.The pellets undergo a transformation from magnetite to hematite during the preheating process,and are solidified through micro-crystalline bonding and high-temperature recrystallization of hematite(Fe_(2)O_(3))during the roasting process.Ultimately,pellets with removal rates of 80.77% for arsenic,88.78% for sulfur,and 99.88% for cyanide are obtained,as well as the iron content is 61.1% and the compressive strength is 3071 N,meeting the requirements for blast furnace burden.This study provides an industrially feasible method for treating arsenic-containing gold smelting tailings,benefiting gold production enterprises.

Enhancing the Goos-Hänchen shift based on quasi-bound states in the continuum through material asymmetric dielectric compound gratings

Quasi-bound state in the continuum(QBIC)resonance is gradually attracting attention and being applied in Goos-Hänchen(GH)shift enhancement due to its high quality(Q)factor and superior optical confinement.Currently,symmetry-protected QBIC resonance is often achieved by breaking the geometric symmetry,but few cases are achieved by breaking the material symmetry.This paper proposes a dielectric compound grating to achieve a high Q factor and high-reflection symmetry-protectede QBIC resonance based on material asymmetry.Theoretical calculations show that the symmetry-protected QBIC resonance achieved by material asymmetry can significantly increase the GH shift up to-980 times the resonance wavelength,and the maximum GH shift is located at the reflection peak with unity reflectance.This paper provides a theoretical basis for designing and fabricating high-performance GH shift tunable metasurfaces/dielectric gratings in the future.

975 nm multimode semiconductor lasers with high-order Bragg diffraction gratings

The 975 nm multimode diode lasers with high-order surface Bragg diffraction gratings have been simulated and calcu-lated using the 2D finite difference time domain(FDTD)algorithm and the scattering matrix method(SMM).The periods and etch depth of the grating parameters have been optimized.A board area laser diode(BA-LD)with high-order diffraction grat-ings has been designed and fabricated.At output powers up to 10.5 W,the measured spectral width of full width at half maxi-mum(FWHM)is less than 0.5 nm.The results demonstrate that the designed high-order surface gratings can effectively nar-row the spectral width of multimode semiconductor lasers at high output power.

Chalcogenide As₂S₃Sidewall Bragg Gratings Integrated on LiNbO₃Substrate

This paper introduces the design and applications of integrated As2S3 sidewall Bragg gratings on LiNbO3 substrate. The grating reflectance and bandwidth are analyzed with coupled-mode theory. Coupling coefficients are computed by taking overlap integration. Numerical results for uniform gratings, phase-shifted gratings and grating cavities as well as electro-optic tunable gratings are presented. These integrated As2S3 sidewall gratings on LiNbO3 substrate provide an approach to the design of a wide range of integrated optical devices including switches, laser cavities, modulators, sensors and tunable filters.

Multiwavelength Actively Mode-locked Fiber Laser with a Double-ring Configuration and Integrated Cascaded Sampled Fiber Bragg Gratings

A modified multiwavelength actively mode-locked fiber ring laser is proposed and experimentally demonstrated. In this kind of laser, stable multiwavelengths lasing is achieved by integrating cascaded sampled fiber Bragg gratings(SFBGs) into the laser cavity. To implement actively mode-locking technique, a double-ring cavity configuration is used to assure that the cavity lengths for all wavelengths lasing are identical. Thus, simultaneous mode locking of all wavelengths has been successfully achieved by using the same mode-locking signal.

Simulation research on surface growth process of positive and negative frequency detuning chromium atom lithographic gratings

Chromium atom photolithography gratings are a promising technology for the development of nanoscale length standard substances due to their high accuracy,uniformity,and consistency.However,the inherent difference between the interaction of positive and negative frequency detuning standing wave field and the atoms can cause a difference in the adjacent peak-to-valley heights of the grating in positive and negative frequency detuning chromium atom lithography,which greatly reduces its accuracy.In this study,we performed a controlled variable growth simulation using the semi-classical theoretical model and Monte Carlo method with trajectory tracking and ballistic deposition methods to investigate the influence of key experimental parameters on the surface growth process of positive and negative frequency detuning atomic lithography gratings.We established a theoretical model based on simulation results and summarized empirical equations to guide the selection of experimental parameters.Our simulations achieved uniform positive and negative frequency detuning atomic lithography gratings with a period of 1/4 of the wavelength corresponding to the atomic transition frequency,and adjacent peak-to-valley heights differing by no more than 2 nm,providing an important theoretical reference for the controllable fabrication of these gratings.

Wavelength-tunable organic semiconductor lasers based on elastic distributed feedback gratings

Wavelength-tunable organic semiconductor lasers based on mechanically stretchable polydimethylsiloxane (PDMS) gratings were developed. The intrinsic stretchability of PDMS was explored to modulate the period of the distributed feedback gratings for fine tuning the lasing wavelength. Notably, elastic lasers based on three typical light-emitting molecules show com-parable lasing threshold values analogous to rigid devices and a continuous wavelength tunability of about 10 nm by mechanic-al stretching. In addition, the stretchability provides a simple solution for dynamically tuning the lasing wavelength in a spec-tral range that is challenging to achieve for inorganic counterparts. Our work has provided a simple and efficient method of fab-ricating tunable organic lasers that depend on stretchable distributed feedback gratings, demonstrating a significant step in the advancement of flexible organic optoelectronic devices.

区段煤柱变形光纤光栅监测应用研究

针对近距离煤层下伏工作面过上覆遗留煤柱时,发生动静载叠加诱发强矿压显现,导致区段煤柱发生变形失稳造成人员伤亡和设备破坏。为探索基于光纤光栅实时监测区段煤柱变形发育特征,分析进、出遗留煤柱阶段矿压显现机理,将FBG、光栅应力计的光测方法相结合,结合现场实测的区段煤柱变形应力应变水平参量变化规律,研究煤柱应变空间分布规律及回采过程中工作面前方煤柱内部应变时域响应特征,验证光测方法在煤体应变水平观测的可行性。结果表明:工作面回采经过上覆遗留煤柱期间,区段煤柱顶板受集中应力影响,上部岩层块体破断并发生回转导致煤柱载荷增加,随着工作面推进覆岩断裂进一步向上传递,关键层断裂回转发生导致工作面来压,最终导致区段煤柱变形失稳。根据现场光栅应变增量幅度判断煤柱内局部变形的剧烈程度,在集中应力作用下,区段煤柱变形时发生最大应变为650×10^(-6),上覆岩层集中应力造成煤柱应变水平峰值位置为煤柱宽度11.5 m,沿煤柱宽度方向应变表现出先增加后减小然后趋于稳定的趋势,内部应变随采动过程中影响范围在5 m左右。综合研究工作面回采经过上覆遗留煤柱时应变对区段煤柱发生变形失稳的特点和规律,以及应变水平变化和煤柱物理力学性质,得到煤柱破坏的前兆特征,在外力作用下达到变形峰值前对煤柱提前进行卸压和防护的安全处理。

基于遗传算法的不等间距阵优化方法

阵元数一定情况下,针对不等间距拖线阵高频信号处理存在的空间增益和无栅瓣兼容问题,提出一种基于遗传算法的不等间距拖线阵阵型优化方法。该方法以频带交互下最大旁瓣级最小作为约束因子,通过模拟生物自然进化过程搜索全局最优解,得到优化后的阵元位置。优化后阵型在保证低频信号处理空间增益不变情况下,实现对高频信号高空间增益、无栅瓣处理。计算机仿真结果表明:相比未优化阵型,在高频信号处理方面,优化后阵型在无栅瓣情况下,空间增益提升值近似理论值提升值;在低频信号处理方面,优化后阵型具有相同的空间增益。为实际不等间距拖线阵阵型优化和应用提供了一种思路。

基于CNN-LSTM混合神经网络的高速铁路地震响应预测

为了更好地挖掘高速铁路在地震时的响应信息,提高光纤光栅监测的效率及预测精度,该文针对地震响应数据的时序性及非线性的特点,提出卷积神经网络(CNN)和长短期记忆(LSTM)网络的混合神经网络模型预测方法.通过在高速铁路简支梁桥上布设准分布式光纤光栅采集地震时轨道板、钢轨、底座板、箱梁的响应数据,在每根光纤上布置7个光栅,利用两边光栅的响应数据预测中间点的光栅响应,将采集位置、历史数据及地震波形等信息作为特征图输入.利用CNN提取特征,再将提前提取出来的特征数据以时序方式作为LSTM网络的输入数据,最后LSTM网络进行地震应变响应预测.实验结果表明,LSTM网络在3层时效果最好,CNN-LSTM方法具有较高的预测精度,根均平方误差(R_(RMSE))、平均绝对误差(R_(MAE))、决定系数(R^(2))分别达到了0.3753、0.2968、0.9371.

大跨越架空输电导线铝部应力分布试验

为了掌握大跨越架空输电导线铝部应力空间分布特性,以JLHA1/G6A-500/280型特强钢芯铝合金导线为研究对象,采用铝股丝表面激光刻槽,内嵌高灵敏、超大复用容量超弱光纤光栅,搭建了大跨越输电导线铝部应力试验平台,研究了不同张力条件下大跨越架空输电导线铝部应力分布规律,建立了大跨越导线实体有限元模型,分析了铝股应力分布特征,并验证了试验结果的正确性。结果表明:导线承受张力作用时,外层铝股和次外层铝股应力不同,外层铝股应力小于次外层铝股应力,导线同层铝股应力基本相同;铝股应力随导线张力的增大呈线性增大趋势,张力每增大1%,铝股应力增大约10%。不同导线张力作用时钢股和铝股应力均呈现环状分层特性,铝股平均应力小于钢股平均应力,铝部和钢股应力比约为3∶7;外层和次外层铝合金股丝应力沿圆周向分布不均匀,建议大跨越导线线型设计时考虑铝股丝分层特性。

基于矢量衍射理论的光栅干涉仪位移测量误差研究

光栅干涉仪位移测量系统作为测量领域中最精密的测量仪器之一,由于在测量过程中光栅的姿态位置无法保证完美装配,使得光栅的光栅矢量方向与运动矢量方向之间出现偏差,导致位移测量结果出现周期性非线性误差。文中针对在光栅干涉仪位移测量过程中出现的光栅与位移台以及读数头之间的姿态位置误差进行分析,通过分别建立位移坐标系及光栅坐标系,参考惯性导航领域中飞行器姿态表示方法,利用一维光栅的横滚、俯仰和偏航角共同描述一维光栅相对于位移台的装配状态。通过基于矢量衍射理论分析光栅干涉仪位移测量时三个维度的角度偏差量,对可能产生的位移测量误差进行了分析说明。基于广义一维光栅方程,探究出了一个更为普遍的结论,为后续装置的改进提供理论依据,以提高系统的测量精度。

考虑光强分布的光通信光栅列阵光束整形方法

光栅单元阵列由大量的单元组成,每个单元的大小和形状都需要精确控制,以确保光束的整形效果。然而,在光通信过程中,光强分布的变化会导致光栅列阵中每个单元的响应度不一致,从而引起每个单元接收到的光信号出现差异,进而影响光束的整形效果。因此,提出一种考虑光强分布的光通信光栅列阵光束整形方法。以光通信光栅列阵中的最常用的列阵波导光栅为例,通过阵列波导结构中的阵列波导的芯区宽度、芯区折射率、包层折射率、波导周期宽度等参数,结合波导中的传播常数受到光束波长和折射率影响,得到阵列波导的归一化本征方程,将其结果结合匀化洛伦兹函数得到入射光和出射光的光强分布,通过计算得到光通信光栅列阵光束入射光及出射光的映射函数,利用函数调整光学参数,实现光通信光栅列阵光束整形。实验结果表明:该方法对光通信光栅列阵光束的整形效果好,整形光束的能量利用率高,光束不均匀性小。

光纤光栅温度应力传感教学实验装置

针对目前市场上可直接用于光纤光栅传感实验教学的装置较少,前沿科研技术和本科实验教学相脱节现状,设计了基于光纤光栅的温度应力传感教学装置。该装置包括光纤激光器、光谱仪和上位机控制软件3部分。光纤激光器实现了1 550 nm左右的激光输出,利用光谱仪测量光纤光栅中心波长的改变,并采集数据输入计算机,上位机控制软件用于图形显示和数据存储等。该实验装置操作简单、组装灵活、重复性和稳定性好,可用于本科实验教学。将前沿科学技术引入本科实验教学,促进了科学研究与本科实验教学相融合,实现了科研教学水平的同步提高。

高精度光栅三维位移敏感结构设计

针对目前的微位移敏感装置在微型化下难以实现高精度三维检测的问题,设计了面内和离面2种位移敏感的光栅结构,并应用于三维微位移的检测中。阐述了光栅理论,设计了双层光栅结构。从2种检测方式对微位移灵敏度的影响角度,通过Gsolver仿真光强衍射效率的大小变化,面内和离面敏感光栅的衍射效率变化分别为0.115%/nm和0.423%/nm,可知,离面敏感光栅的衍射效率灵敏度是面内敏感光栅的4倍。进而将离面位移敏感的光栅布置在被测物的三维方向,实现高精度三维位移测量。

彩色光栅投影的三维轮廓自动化测量研究

为了测量物体的三维轮廓数据,提出一种基于改进彩色光栅投影三维轮廓测量技术,并利用DLP来投影彩色光栅条纹到被测物体上来测量被测物体的高度,由于DLP的投射范围太大,无法直接投射在微小物体上,因此通过自行改装的方式改变DLP的投射范围,将其投影面积限制在约20×20 mm内,使其能覆盖整个被测物体。但由于改装时所选用的DLP镜头并不是针对DLP而设计的,因此容易产生光场分布不均的情况,可对无光栅图像或有彩色光栅图像进行光场补偿,使光栅图像更为清楚,用于对被测物体进行更准确的三维轮廓测量与重建分析计算,且获取被测物体的三维数据精度可达2μm,速度在0.024 s内。实验结果表明,该方法具有更高的速度、灵敏度及适用性。

基于构造绝对值三角函数的光栅信号细分

为了进一步提高光栅传感器的测量精度,需要对信号进行细分,但光栅莫尔信号的细分精度取决于信号的质量。本文利用归一化并结合CORDIC的方法补偿了直流、幅值、相位等误差,利用补偿后的信号构造绝对值三角函数,实现一个完整周期信号的16倍细分,并通过MATLAB进行了仿真,验证了该方法的可行性。

一种光纤布喇格光栅涡街流量传感器

在流量计量领域中,利用光纤传感技术对涡街流量计量的研究较少,故具有重要的研究意义。该文设计了一种悬臂梁式的光纤布喇格光栅涡街流量传感器,其利用悬臂梁自由端振动使光纤布喇格光栅中心波长发生周期性移位,从而测量涡街频率,得到流体流量信息。温度传感测试实验与流量传感测试实验结果表明,该传感器温度灵敏度为17 pm/℃,涡街流量灵敏度为0.01895 Hz/(L·h^(-1)),非线性误差为2.23%。实验验证了该传感器可应用于液体涡街流量计量。

基于光栅尺测量的明渠流量计校准装置及其在线校准方法研究

明渠流量计是监测水流量的一种计量器具,广泛应用于各行各业。因其不便拆卸、堰槽设计不规范、校准方法缺失等原因,使得明渠流量计在线溯源成为业内亟需解决的难题。该文开发出一款基于光栅尺测量的明渠流量计校准装置,并应用该装置研究出模拟液位法的明渠流量计在线校准方法。该方法克服了标准液位计法及流速面积法等现有溯源方法存在的不足,具有操作简便、测量准确、模拟水位可调、过程智能化等特点,为明渠流量计在线溯源提供技术支撑。

亚角秒空间分辨的太阳极紫外宽波段成像光谱仪光学设计

狭缝式成像光谱仪是太阳极紫外光谱成像探测的重要工具之一,然而目前国内尚无该类载荷,导致太阳物理学和空间天气学等学科在极紫外光谱诊断研究方面主要依赖国外仪器数据,严重制约了相关学科的发展.国外已发射的成像光谱仪仅具有2"量级的空间分辨率,很难观测到日冕加热模型预测的等离子体核心特征.为了更好地理解太阳不同层次大气之间的耦合过程,需要更宽光谱覆盖的太阳观测数据.鉴于此,本文提出并设计了一款亚角秒空间分辨的太阳极紫外宽波段成像光谱仪,相比现有仪器,系统能够实现更高空间和光谱分辨率、更宽光谱范围覆盖的观测.性能评价结果表明,系统在62—80 nm,92—110 nm波段内的像元空间分辨率均优于0.4",光谱分辨率均优于0.007 nm,光谱成像质量接近衍射极限,对我国未来首台空间太阳极紫外成像光谱仪的研制具有重要参考价值.