The structure variation of deformed austenite during the relaxation stage after deformation at various temperatures in an Nb-B ultra low carbon bainitic steel and Fe-Ni alloy was studied by the thermo-simulation. Opti...The structure variation of deformed austenite during the relaxation stage after deformation at various temperatures in an Nb-B ultra low carbon bainitic steel and Fe-Ni alloy was studied by the thermo-simulation. Optical microscope and TEM were applied to analyze the microstructure after RPC (Relaxation-precipitation-controlling phase transformation technique) and the evolution of dislocation configuration. The particle tracking autoradiography (PTA) technique, revealing the distribution of boron, was employed to show the change of boron segregation after different relaxation times. The results indicate that during the relaxation stage the recovery occurs in the deformed austenite, the dislocations rearrange and subgrains form. During the subsequent cooling the boron will segregate at the boundaries of subgrains.展开更多
Fine cellular subgrain structure was formed in the Selective Laser Melting(SLM) manu factured IN718 alloy via optimizing the processing parameters.During the subsequent homogenization heat treatment process,the Laves ...Fine cellular subgrain structure was formed in the Selective Laser Melting(SLM) manu factured IN718 alloy via optimizing the processing parameters.During the subsequent homogenization heat treatment process,the Laves phase dispersed at the subgrain boundaries can be eliminated while the cellular subgrain structure is reserved in the printed samples after holding at 1080℃ for 50 min.With the prolongation of the holding time,the subgrain boundaries undergo low angle rotation via the motion ofdislocation,which leads to the annihilation of the cellular subgrain structure.Moreover,during the subsequent double aging heat treatment process,the reserved cellular subgrain structure in the homogenized samples promotes the precipitation of γ" second phase nanoparticles,and these precipitated γ" phase nanoparticles prefer to distribute at subgrain boundaries.It was found that these unique subgrain boundaries with γ" phase precipitates can hinder but not fully terminate the motion of dislocation during the plastic deformation process,which contributes to increasing the strength as well as holding the stable plastic flow.Hence,the strength and ductility of final prepared IN718 alloy with cellular subgrain microstructure were improved simultaneously compared to the prepared alloy without cellular subgrain structure,which even exceed the mechanical properties standards(AMS 5662) of wrought IN718 alloy.These results in our work suggest that controlling the subgrain structure is a promising effective strategy to improve the mechanical properties of SLM manu factured nickel-based superalloy.展开更多
基金This work is financially supported by the National Natural Science Foundation of China (No. 50471089)
文摘The structure variation of deformed austenite during the relaxation stage after deformation at various temperatures in an Nb-B ultra low carbon bainitic steel and Fe-Ni alloy was studied by the thermo-simulation. Optical microscope and TEM were applied to analyze the microstructure after RPC (Relaxation-precipitation-controlling phase transformation technique) and the evolution of dislocation configuration. The particle tracking autoradiography (PTA) technique, revealing the distribution of boron, was employed to show the change of boron segregation after different relaxation times. The results indicate that during the relaxation stage the recovery occurs in the deformed austenite, the dislocations rearrange and subgrains form. During the subsequent cooling the boron will segregate at the boundaries of subgrains.
基金National Natural Science Foundation of China (Grant No.51822404 and 51804218)the Science and Technology Program of Tianjin (Grant No.19YFZCGX00790 and 18YFZCGX00070)+1 种基金supported by the Natural Science Foundation of Tianjin (Grant No.18JCYBJC17900)the Seed Foundation of Tianjin University (2018XRX-0005)。
文摘Fine cellular subgrain structure was formed in the Selective Laser Melting(SLM) manu factured IN718 alloy via optimizing the processing parameters.During the subsequent homogenization heat treatment process,the Laves phase dispersed at the subgrain boundaries can be eliminated while the cellular subgrain structure is reserved in the printed samples after holding at 1080℃ for 50 min.With the prolongation of the holding time,the subgrain boundaries undergo low angle rotation via the motion ofdislocation,which leads to the annihilation of the cellular subgrain structure.Moreover,during the subsequent double aging heat treatment process,the reserved cellular subgrain structure in the homogenized samples promotes the precipitation of γ" second phase nanoparticles,and these precipitated γ" phase nanoparticles prefer to distribute at subgrain boundaries.It was found that these unique subgrain boundaries with γ" phase precipitates can hinder but not fully terminate the motion of dislocation during the plastic deformation process,which contributes to increasing the strength as well as holding the stable plastic flow.Hence,the strength and ductility of final prepared IN718 alloy with cellular subgrain microstructure were improved simultaneously compared to the prepared alloy without cellular subgrain structure,which even exceed the mechanical properties standards(AMS 5662) of wrought IN718 alloy.These results in our work suggest that controlling the subgrain structure is a promising effective strategy to improve the mechanical properties of SLM manu factured nickel-based superalloy.