Effect of Rare-Earth Element Substitution in Superconducting R_(3)Ni_(2)O_(7) under Pressure

Recently,high temperature(T_(c)≈80 K)superconductivity(SC)has been discovered in La_(3)Ni_(2)O_(7)(LNO)under pressure.This raises the question of whether the superconducting transition temperature T_(c) could be further enhanced under suitable conditions.One possible route for achieving higher T_(c) is element substitution.Similar SC could appear in the Fmmm phase of rare-earth(RE)R_(3)Ni_(2)O_(7)(RNO,R=RE element)material series under suitable pressure.The electronic properties in the RNO materials are dominated by the Ni 3d orbitals in the bilayer NiO_(2) plane.In the strong coupling limit,the SC could be fully characterized by a bilayer single 3d_(x^(2)−y^(2))-orbital t–J‖–J⊥ model.With RE element substitution from La to other RE element,the lattice constant of the Fmmm RNO material decreases,and the resultant electronic hopping integral increases,leading to stronger superexchanges between the 3d_(x^(2)−y^(2)) orbitals.Based on the slave-boson mean-field theory,we explore the pairing nature and the evolution of T_(c) in RNO materials under pressure.Consequently,it is found that the element substitution does not alter the pairing nature,i.e.,the inter-layer s-wave pairing is always favored in the superconducting RNO under pressure.However,the T_(c) increases from La to Sm,and a nearly doubled T_(c) could be realized in SmNO under pressure.This work provides evidence for possible higher T_(c) R_(3)Ni_(2)O_(7) materials,which may be realized in further experiments.

Effects of long-term partial substitution of inorganic fertilizer with pig manure and/or straw on nitrogen fractions and microbiological properties in greenhouse vegetable soils

Partial substitution of inorganic fertilizers with organic amendments is an important agricultural management practice.An 11-year field experiment(22 cropping periods)was carried out to analyze the impacts of different partial substitution treatments on crop yields and the transformation of nitrogen fractions in greenhouse vegetable soil.Four treatments with equal N,P_(2)O_(5),and K_(2)O inputs were selected,including complete inorganic fertilizer N(CN),50%inorganic fertilizer N plus 50%pig manure N(CPN),50%inorganic fertilizer N plus 25%pig manure N and 25%corn straw N(CPSN),and 50%inorganic fertilizer N plus 50%corn straw N(CSN).Organic substitution treatments tended to increase crop yields since the 6th cropping period compared to the CN treatment.From the 8th to the 22nd cropping periods,the highest yields were observed in the CPSN treatment where yields were 7.5-11.1%greater than in CN treatment.After 11-year fertilization,compared to CN,organic substitution treatments significantly increased the concentrations of NO_(3)^(-)-N,NH_(4)^(+)-N,acid hydrolysis ammonium-N(AHAN),amino acid-N(AAN),amino sugar-N(ASN),and acid hydrolysis unknown-N(AHUN)in soil by 45.0-69.4,32.8-58.1,49.3-66.6,62.0-69.5,34.5-100.3,and 109.2-172.9%,respectively.Redundancy analysis indicated that soil C/N and OC concentration significantly affected the distribution of N fractions.The highest concentrations of NO_(3)^(-)-N,AHAN,AAN,AHUN were found in the CPSN treatment.Organic substitution treatments increased the activities ofβ-glucosidase,β-cellobiosidase,N-acetyl-glucosamidase,L-aminopeptidase,and phosphatase in the soil.Organic substitution treatments reduced vector length and increased vector angle,indicating alleviation of constraints of C and N on soil microorganisms.Organic substitution treatments increased the total concentrations of phospholipid fatty acids(PLFAs)in the soil by 109.9-205.3%,and increased the relative abundance of G^(+)bacteria and fungi taxa,but decreased the relative abundance of G-bacteria,total bacteria,and actinomycetes.Overall,long-term organic substitution management increased soil OC concentration,C/N,and the microbial population,the latter in turn positively influenced soil enzyme activity.Enhanced microorganism numbers and enzyme activity enhanced soil N sequestration by transforming inorganic N to acid hydrolysis-N(AHN),and enhanced soil N supply capacity by activating non-acid hydrolysis-N(NAHN)to AHN,thus improving vegetable yield.Application of inorganic fertilizer,manure,and straw was a more effective fertilization model for achieving sustainable greenhouse vegetable production than application of inorganic fertilizer alone.

Novel Methodologies for Preventing Crack Propagation in Steel Gas Pipelines Considering the Temperature Effect

Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃ to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃ and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.

Effect of Cu ion substitution on structural and dielectric properties of Ni-Zn ferrites

A series of Cu-substituted Ni_(0.5-x)Cu_xZn_(0.5)Fe_2O_4(x=0.12,0.16,0.20,0.24 and 0.28) spinel ferrites were prepared by conventional ceramic method to investigate the effects of Cu compositional variation on the structure and dielectric properties.XRD patterns demonstrate that all the samples are crystallized in single-phase cubic spinel structure and the lattice constant increases with increasing Cu content.White grains observed by SEM are Cu-rich phase.The dielectric constant versus frequency curve displays a normal dielectric behavior of spinel ferrites.While the frequency dependence of dielectric loss tangent is found to be abnormal,exhibiting a peak at certain frequency for all Cu-substituted Ni-Zn ferrites.A maximum of the resistivity is observed at x=0.2 due to the decrease of hopping electrons between Fe^(2+) and Fe^(3+) in per unit volume,which is in contrast with the Cu content dependence of dielectric constant and dielectric loss.

Effect of Sn substitution and heat treatment on microstructure and microhardness of Co_(38)Ni_(34)Al_(28-x)Sn_x magnetic shape memory alloys

Sn was used to replace Al in Co38Ni34Al28 alloy. The microstructure and microhardness of Co38Ni34Al28-xSnx （x=0, 1, 2, 3） magnetic shape memory alloys were investigated at different heat treatment temperatures （1373 K, 1473 K, and 1573 K） for 2 h. The results show that more Sn substitution reduces the content of γ-phase and a partial phase of martensite can be obtained in Co38Ni34Al28-xSnx （x=1, 2, 3） alloys after treatment at 1573 K for 2 h. The maximum martensite phase appears when 2% Al is substituted by Sn. The reverse martensitic transformation temperature of Co38Ni34Al28-xSnx alloys increases at x=1 and 2, then decreases as x=3. As the content of Sn and the temperature increase, the microhardness will increase.

Effect of stoichiometry and Cu-substitution on the phase structure and hydrogen storage properties of Ml-Mg-Ni-based alloys

To improve the electrochemical properties of rare-earth-Mg-Ni-based hydrogen storage alloys, the effects of stoichiometry and Cu-substitution on the phase structure and thermodynamic properties of the alloys were studied. Nonsubstituted Ml0.80Mg0.20（Ni2.90Co0.50-Mn0.30Al0.30）x （x=0.68, 0.70, 0.72, 0.74, 0.76） alloys and Cu-substituted Ml0.80Mg0.20（Ni2.90Co0.50-yCuyMn0.30Al0.30）0.70 （y=0, 0.10, 0.30, 0.50） alloys were prepared by induction melting. Phase structure analysis shows that the nonsubstituted alloys consist of a LaNi5 phase, a LaNi3 phase, and a minor La2Ni7 phase;in addition, in the case of Cu-substitution, the Nd2Ni7 phase appears and the LaNi3 phase vanishes. Ther-modynamic tests show that the enthalpy change in the dehydriding process decreases, indicating that hydride stability decreases with in-creasing stoichiometry and increasing Cu content. The maximum discharge capacity, kinetic properties, and cycling stability of the alloy electrodes all increase and then decrease with increasing stoichiometry or increasing Cu content. Furthermore, Cu substitution for Co ame-liorates the discharge capacity, kinetics, and cycling stability of the alloy electrodes.

Effect of Ti substitution on hydrogen storage properties of Zr_(1-x)Ti_xCo (x = 0, 0.1, 0.2, 0.3) alloys

Zr1-xTixCo(x = 0, 0.1, 0.2, 0.3) alloys were prepared by arc-melting method and the effect of Ti substitution on hydrogen storage properties was studied systematically. Hydrogen desorption pressure-composition-temperature(PCT) measurements were carried out using Sievert’s type volumetric apparatus for ZrCo(at 473 K, 573 K and 673 K) and Zr1-xTixCo alloys(at 673 K), respectively. Products after dehydrogenation were characterized by X-ray diffraction(XRD). In addition, the kinetics of Zr1-xTixCo hydride was investigated at 473 K and 673 K,respectively, under hydrogen pressure of 5 MPa. Results showed that Ti substitution for Zr did not change the crystal structure of ZrCo phase.With the increase of temperature from 473 K to 673 K, the extent of disproportionation for ZrCo alloy increased. With Ti content increasing at 673 K, the desorption equilibrium pressure of Zr1-xTixCo-H2 systems elevated and the disproportionation reaction of Zr1-xTixCo alloys was inhibited effectively. Ti substitution decreased the kinetics rate and the effective hydrogen storage capacity of Zr1-xTixCo alloys slightly.Generally speaking, it was found that Zr0.8Ti0.2Co alloy had better anti-disproportionation property with less decrease of effective hydrogen storage capacity which was beneficial to tritium application in the International Thermonuclear Experimental Reactor(ITER).

Effect of component substitution on the microstructure and mechanical properties of MCoCrFeNiTi_x (M = Cu, Al) solid-solution alloys

MCoCrFeNiTix （M = Cu, Al; x： molar ratio, x = 0, 0.5） alloys were prepared using the new alloy-design strategy of equal-atomic ratio and high entropy. By the component substitution orAl for Cu, the microstructure changes from the face-centered cubic solid solution of original CuCoCrFeNiTix alloys to the body-centered cubic solid solution of AlCoCrFeNiTix alloys. Compared with original CuCoCrFeNiTix alloys, AlCoCrFeNiTix alloys keep the similar good ductility and simultaneously possess a much higher compressive strength, which are even superior to most of the reported high-strength alloys like bulk metallic glasses.

Effects of Ca substitution and surface treatment on electrochemical performances of Ml_(1.0-x) Ca_xNi_(4.0) Co_(0.6) Al_(0.4) hydrogen storage alloy electrodes

The influences of Ca substitution for Ml and surface treatment on electrochemical performances of Ml 1.0- x Ca x Ni 4.0 Co 0.6 Al 0.4 hydrogen storage alloy electrode were investigated. Ca substitution with x <0.2 for Ml could improve its discharge capacity, but Ca substitution with x >0.2 could decrease the capacity. It was also found that Ca substitution deteriorates the electrocatalytic activity, high rate dischargeability and cycling durability of the alloy electrode. In order to improve these properties of Ml 1.0- x Ca x Ni 4.0 Co 0.6 Al 0.4 alloy electrode, the alloy was treated in 6 mol/L KOH+0.02 mol/L KBH 4 solution. The results showed that the surface treatment improves the electrochemical performances such as the electrocatalytic activity, high rate dischargeability and cycling durability of the alloy electrode. :The influences of Ca substitution for Ml and surface treatment on electrochemical performances of Ml 1.0- x Ca x Ni 4.0 Co 0.6 Al 0.4 hydrogen storage alloy electrode were investigated. Ca substitution with x <0.2 for Ml could improve its discharge capacity, but Ca substitution with x >0.2 could decrease the capacity. It was also found that Ca substitution deteriorates the electrocatalytic activity, high rate dischargeability and cycling durability of the alloy electrode. In order to improve these properties of Ml 1.0- x Ca x Ni 4.0 Co 0.6 Al 0.4 alloy electrode, the alloy was treated in 6 mol/L KOH+0.02 mol/L KBH 4 solution. The results showed that the surface treatment improves the electrochemical performances such as the electrocatalytic activity, high rate dischargeability and cycling durability of the alloy electrode.

Influence of the substitution of Sm, Gd, and Dy for La in La_(0.7)Sr_(0.3)MnO_3 on its magnetic and electric properties and strengthening effect on room-temperature CMR

A series of La0.7-xSmxSr0.3MnO3, La0.7-xGdxSr0.3MnO3, and La0.7-xDyxSr0.3MnO3 （x=0.00, 0.10, 0.20, 0.30） samples were prepared by the solid-state reaction method. The influence of the substitution of Sm, Gd, and Dy for La on the magnetic and electric properties and on the magnetoresistance （MR） was studied through measurements of M-T curves and p-T curves. The results showed that： lattice distortion induced by substitution of Sm, Gd, and Dy for La and extra magnetism of substitution had great influence on the magnetic and electric properties of pcrovskite manganites; substitution of magnetic rare earth element for La was an effective way to change Curie temperature and to strengthen MR in perovskite manganites; and appropriate substitution proportion would generate large MR near room temperature.

Effects of Sr^(2+) substitution on the structural, dielectric, and piezoelectric properties of PZT-PMN ceramics

This study described the structural, dielectric, and piezoelectric behavior of Pb1-xSrx[（Zr0.52Ti0.48）0.95（Mn1/3Nb2/3）0.05]O3 ceramics （PSZT-PMN, x=0, 0.025, 0.050, and 0.075）, prepared by a semi-wet route. X-ray diffraction, dielectric, and piezoelectric investigations were carried out to analyze the crystal structure. The relative dielectric constant and dielectric loss were both calculated as the functions of temperature. The room-temperature dielectric constant reaches a maximum for a Sr2＋-modified PZT-PMN ceramic with an x value of 0.050, which corresponds to the morphotropic phase boundary （MPB）. Raman spectroscopy studies also confirm the existence of this MPB for x=0.050. The piezoelectric strain coefficients （d33） value shows a maximum response for this composition. In addition, the phase transition temperature decreases significantly when the Sr2＋concentration increases in the PZT-PMN ceramics.

Effect of R substitution on magnetic properties and magnetocaloric effects of La_(1-x)R_xFe_(11.5)Si_(1.5) compounds with R=Ce,Pr and Nd

Magnetic properties and magnetocaloric effects of La1-xRxFe11.5Si1.5 （R=Pr, （0 ≤ x ≤ 0.5）; R = Ce and Nd, （0 ≤ x ≤ 0.3）） compounds are investigated. Partially replacing La with R = Ce, Pr and Nd in La1-xRxFe11.5Si1.5 leads to a reduction in Curie temperature due to the lattice contraction. The substitution of R for La causes an enhancement in field-induced itinerant electron metamagnetic transition, which leads to a remarkable increase in magnetic entropy change ASm and also in hysteresis loss. However, a high effective refrigerant capacity RCeff is still maintained in La1-xRxFe11.5Si1.5. In the present samples, a large △Sm and a high RCeff have been achieved simultaneously.

Effect of erbium substitution on thermoelectric properties of complex oxide Ca_3Co_2O_6 at high temperatures

Polycrystalline particles of Ca3-xErxCo2O6 （x=0.0, 0.15, 0.3, 0.45 and 0.6） were synthesized using sol-gel method combined with Low Temperature Sintering procedure （LTS） to evaluate the effect of Er substitution on the thermoelectric properties of Ca3Co2O6. The crystal structure and microstructure were investigated using X-ray diffraction, infrared spectroscopy and scanning electron microscope. The electrical conductivity and Seebeck coefficient of the complex oxides were measured from 300 to 1073 K. The results showed that all the sampies were p-type semiconductors. The electrical conductivity increased with the increase in temperature. Er substitutions at Ca site affected carrier concentrations and carder mobility, resulting an increase in Seebeck coefficient and decrease in electrical conductivity. The power factor of Ca2.85Er0.15Co2O6 reached 10.66 μw/mK^2 at 1073 K.

Effects of sodium substitution on properties of LiMn_2O_4 cathode for lithium ion batteries

Na-doped Li1.05Mn2O4 cathodes were synthesized using a sol-gel process.The samples were characterized by X-ray diffractometry(XRD),cyclic voltammetry(CV),electrochemical impedance spectroscopy(EIS)and charge-discharge measurements. The results show that all the samples exhibit the same cubic spinel phase structure without impurity.The lattice constant and unit cell volume decrease with increasing the sodium dopant amount.As the molar ratio of sodium to manganese(x=n(Na)/n(Mn))increases from 0 to 0.03,the initial discharge capacity of the Li1.05Mn2O4 cathodes decreases from 119.2 to 107.9 mA·h/g,and the discharge capability at large current rate and the storage performance decline dramatically,while cycling performance at room temperature and 55℃are improved.The CV and EIS studies indicate that reversibility of Li1.05Mn2O4 cathodes decreases and the electrochemical impedance increases with increasing the sodium dopant amount.

Effect of cobalt substitution on magnetic properties and microstructure of nanocrystalline(NdDyTb)_(12.3)(FeZrNbCu)_(81.7)B_(6.0) ribbons

Effect of Co substitution and annealing treatment on the formation, magnetic properties and microstructure of （NdDyTb）12.3（FeZrNbCu）81.7.xCoxB6 （x=0-15） ribbons prepared by rapid quenching and subsequent annealing was systematically investigated by means of differential scanning calorimeter （DSC）, X-ray diffraction （XRD）, high resolution scanning electron microscopy （HRSEM） and vibrating sample magnetometer （VSM）. Phase analysis revealed single-phase material. The remanence polarization Jr and maximum energy product （BH）max increased with increasing x from 0 to 12 and then decreased for x=15. The intrinsic coercivity Hci of （NdOyTb）12.3 （FeZrNbCu）81.7-xCoxB6 ribbons optimally processed decreased from 1308.7 kA/m for x=0 to 817.4 kA/m for x=15. Optimum magnetic properties with Jr=1.041 T, Hci=944.9 EA/m and （BH）max=155.1 kJ/m^3 were achieved by annealing melt-spun ribbon （x=12） at 675 ℃ for 10 min. There was no significant influence of Co substitution on microstructure.

Effects of a decade of organic fertilizer substitution on vegetable yield and soil phosphorus pools, phosphatase activities, and the microbial community in a greenhouse vegetable production system

Partial substitution of chemical fertilizers by organic amendments is adopted widely for promoting the availability of soil phosphorus(P)in agricultural production.However,few studies have comprehensively evaluated the effects of longterm organic substitution on soil P availability and microbial activity in greenhouse vegetable fields.A 10-year(2009–2019)field experiment was carried out to investigate the impacts of organic fertilizer substitution on soil P pools,phosphatase activities and the microbial community,and identify factors that regulate these soil P transformation characteristics.Four treatments included 100%chemical N fertilizer(4 CN),50%substitution of chemical N by manure(2 CN+2 MN),straw(2 CN+2 SN),and combined manure with straw(2 CN+1 MN+1 SN).Compared with the 4 CN treatment,organic substitution treatments increased celery and tomato yields by 6.9-13.8%and 8.6-18.1%,respectively,with the highest yields being in the 2 CN+1 MN+1 SN treatment.After 10 years of fertilization,organic substitution treatments reduced total P and inorganic P accumulation,increased the concentrations of available P,organic P,and microbial biomass P,and promoted phosphatase activities(alkaline and acid phosphomonoesterase,phosphodiesterase,and phytase)and microbial growth in comparison with the 4 CN treatment.Further,organic substitution treatments significantly increased soil C/P,and the partial least squares path model(PLS-PM)revealed that the soil C/P ratio directly and significantly affected phosphatase activities and the microbial biomass and positively influenced soil P pools and vegetable yield.Partial least squares(PLS)regression demonstrated that arbuscular mycorrhizal fungi positively affected phosphatase activities.Our results suggest that organic fertilizer substitution can promote soil P transformation and availability.Combining manure with straw was more effective than applying these materials separately for developing sustainable P management practices.

Effects of La substitution on microstructure and hydrogen storage properties of Ti−Fe−Mn-based alloy prepared through melt spinning

The as-spun Ti_(1−x)La_(x)Fe_(0.8)Mn_(0.2)(x=0,0.01,0.03,0.06,0.09,molar fraction)alloys were prepared by melt spinning.The effects of La substitution for Ti on the microstructure,hydrogen storage kinetics and thermodynamics of TiFe-type Ti−Fe−Mn-based alloy were investigated.The as-spun alloys hold the TiFe single phase,which transforms to TiFeH_(0.06),TiFeH,and TiFeH_(2) hydrides after hydrogenation.La substitution promotes the formation of micro-defects(such as dislocations and grain boundaries)in the alloys,thus facilitating hydrogen diffusion.In addition,the hydrogen storage kinetics properties are improved after introducing La element.With the rise of La content,the hydrogen storage capacity decreases firstly and then increases,but the absolute value of hydriding enthalpy change(|ΔH|)increases firstly and then reduces.When x=0.01,the maximum value of|ΔH|is obtained to be(25.23±0.50)kJ/mol for hydriding,and the alloy has the maximum hydrogen absorption capacity of(1.80±0.04)wt.%under the conditions of 323 K and 3 MPa.

Partial organic substitution weakens the negative effect of chemical fertilizer on soil micro-food webs

Soil biotic communities play vital roles in enhancing soil nutrient cycling and soil fertility.Long-term excessive nitrogen(N)application is disadvantageous to the stability of soil food webs and affects arable soil health and sustainable utilization.Proper organic substitution is essential to improve soil health and alleviate the disadvantages of excessive chemical fertilization.However,the biological effects of various organic amendments on soil micro-food webs are poorly understood.In order to explore the effects of various organic amendments including stover,biochar and manure on soil micro-food webs(microbial and nematode communities),a field plot experiment with maize having five treatments viz.,100%urea(100%N),70%urea(70%N),70%urea plus stover(Stover),70%urea plus cattle manure(Manure)and 70%urea plus biochar(Biochar)was conducted.Manure treatment increased the carbon(C)to N use efficiency of soil microbes,which contributed to the retention of soil C,while Biochar treatment elevated soil organic C(SOC)and soil p H.Additionally,Biochar treatment mitigated the negative effects of soil acidification on the soil micro-food web and reduced the abundance of plant parasites.Overall,the biological effect of organic amendments was distinguished from chemical fertilization(100%N and 70%N)through principal co-ordinates analysis.Negative relationships among soil properties,microbial and nematode biomass in the 100%N treatment were diminished in treatments where chemical fertilizer was reduced.The bottom-up effects on soil food webs were observed in organic substitution treatments.In conclusion,organic amendments improved soil fertility by regulating soil microbial and nematode communities in the cropland ecosystem,alleviated the negative effects of chemical fertilizer on the micro-food webs and controlled the trophic cascades among soil biota.

Effect of Sn substitution for Co on microstructure and electrochemical performance of AB_5 type La_(0.7)Mg_(0.3)Al_(0.3)Mn_(0.4)Co_(0.5-x)Sn_xNi_(3.8)(x=0-0.5) alloys

The effects of substitution of Sn for Co on the microstructure, hydrogen storage and electrochemical discharge capacity of La0.7Mg0.3Al0.3Mn0.4Co0.5-xSnxNi3.8 （x=0, 0.1, 0.2, 0.3 and 0.5） alloys were investigated using X-ray diffraction （XRD）, pressure composition isotherm （PCT） and electrochemical discharge cycle. XRD, scanning electron microscopy （SEM） and energy dispersive spectroscopy （EDS） tests showed that all of alloys are mainly composed of LaNi5 and MgNi2 phases, but when increasing the content of Sn in alloys, the LaNiSn phase appears and microstructure is refined. The PCT showed that increasing substitution of Sn for Co results in decrease of the maximum hydrogen storage capacity from 1.48% （x=0） to 0.85% （x=0.5）. The electrochemical tests indicated that the maximum discharge capacity decreases from 337.1 mA-h/g （x=0） to 239.8 mA.h/g （x=0.5）; however, the discharge capacity retention at the 100th cycle increases from 70.2% （x=0） to 78.0% （x=0.5）.

Applications of fluid substitution effect analysis on seismic interpretation

The root mean square(RMS) difference of time-lapse seismic amplitudes is routinely used to identify the substituted fluid type in a reservoir during oil field production and recovery. By a time-lapse seismic method, we study the effects of fluid substitution in a physical model, which is an analogy of the three-dimensional inhomogeneous reservoir. For a weak inhomogeneous medium, gas/oil substitution results in positive anomalies in the reservoir layers, and negative anomalies below the bottom of the reservoir layers; while water/oil substitution causes only weak variations in the reservoir layers, but positive anomalies below the bottom of the reservoir layers. For the strong inhomogeneous medium, no matter what kind of fluid substitution(gas/oil or water/oil), there are significant anomalies in seismic amplitude difference attributes both in and below the reservoir layers. Therefore, for weak inhomogeneous media, such as tight sandstone or thin interbedded layers, the RMS amplitude difference attributes can be used to monitor fluid changes and predict the drilling direction; for inhomogeneous medium with karst carves or fractures, it is difficult to accurately determine the distribution of fluids with the RMS amplitude difference attributes.