A DESIGN METHODOLOGY FOR LOW-LEAKAGE AND HIGHPERFORMANCE BUFFER BASED ON DEVIANT BEHAVIOR OF GATE LEAKAGE

Based on the observation that both subthreshold and gate leakage depend on transistors width, this paper introduces a feasible method to fast estimate leakage current in buffers. In simulating of leakage current with swept transistor width, we found that gate leakage is not always a linear function of the device geometry. Subsequently, this paper presented the theoretical analysis and experimental evidence of this exceptional gate leakage behavior and developed a design methodology to devise a low-leakage and high-performance buffer with no penalty in area using this deviation.

Leakage Analysis of a Low Power 10 Transistor SRAM Cell in 90 nm Technology

In this paper, a novel 10 Transistor Static Random Access Memory (SRAM) cell is proposed. Read and Write bit lines are decoupled in the proposed cell. Feedback loop-cutting with single bit line write scheme is employed in the 10 Transistor SRAM cell to reduce active power consumption during the write operation. Read access time and write access time are measured for proposed cell architecture based on Eldo SPICE simulation using TSMC based 90 nm Complementary Metal Oxide Semiconductor (CMOS) technology at various process corners. Leakage current measurements made on hold mode of operation show that proposed cell architecture is having 12.31 nano amperes as compared to 40.63 nano amperes of the standard 6 Transistor cell. 10 Transistor cell also has better performance in terms of leakage power as compared to 6 Transistor cell.

A 200 mV low leakage current subthreshold SRAM bitcell in a 130 nm CMOS process

A low leakage current subthreshold SRAM in 130 nm CMOS technology is proposed for ultra low voltage（200 mV） applications.Almost all of the previous subthreshold works ignore the leakage current in both active and standby modes.To minimize leakage,a self-adaptive leakage cut off scheme is adopted in the proposed design without any extra dynamic energy dissipation or performance penalty.Combined with buffering circuit and reconfigurable operation,the proposed design ensures both read and standby stability without deteriorating writability in the subthreshold region.Compared to the referenced subthreshold SRAM bitcell,the proposed bitcell shows：（1） a better critical state noise margin,and（2） smaller leakage current in both active and standby modes. Measurement results show that the proposed SRAM functions well at a 200 mV supply voltage with 0.13μW power consumption at 138 kHz frequency.

DOIND： a technique for leakage reduction in nanoscale domino logic circuits

A novel DOIND logic approach is proposed for domino logic, which reduces the leakage current with a minimum delay penalty. Simulation is performed at 70 nm technology node with supply voltage 1V for domino logic and DOIND logic based AND, OR, XOR and Half Adder circuits using the tanner EDA tool. Simulation results show that the proposed DOIND approach decreases the average leakage current by 68.83%, 66.6%, 77.86% and 74.34% for 2 input AND, OR, XOR and Half Adder respectively. The proposed approach also has 47.76% improvement in PDAP for the buffer circuit as compared to domino logic.

Gate leakage current reduction in IP3 SRAM cells at 45 nm CMOS technology for multimedia applications

We have presented an analysis of the gate leakage current of the IP3 static random access memory （SRAM） cell structure when the cell is in idle mode（performs no data read/write operations） and active mode （performs data read/write operations）,along with the requirements for the overall standby leakage power,active write and read powers.A comparison has been drawn with existing SRAM cell structures,the conventional 6T,PP, P4 and P3 cells.At the supply voltage,V_（DD） = 0.8 V,a reduction of 98%,99%,92%and 94%is observed in the gate leakage current in comparison with the 6T,PP,P4 and P3 SRAM cells,respectively,while at V_（DD） = 0.7 V,it is 97%,98%,87%and 84%.A significant reduction is also observed in the overall standby leakage power by 56%〉, the active write power by 44%and the active read power by 99%,compared with the conventional 6T SRAM cell at V_（DD）= 0.8 V,with no loss in cell stability and performance with a small area penalty.The simulation environment used for this work is 45 nm deep sub-micron complementary metal oxide semiconductor（CMOS） technology,t_（ox） = 2.4 nm,K_（thn） = 0.22 V,K_（thp） = 0.224 V,V_（DD） = 0.7 V and 0.8 V,at T = 300 K.