Acid equilibrium during bioleaching of alkaline low-grade sulfide copper ore

This article reports the study on acid equilibrium during bioleaching of alkaline low-grade copper sulfide ore. Adding auxiliary agents 1# （sulfur） and 2# （pyrite） makes bacterial leaching of copper and acid production carried out simultaneously because the auxiliary agents can be oxidized by bacteria and the oxidation products involve acid. The acid required for dissolving alkaline gangue during bacterial leaching is produced, and acid equilibrium is reached during the ore bio-leaching. The recovery of copper reaches more than 95%.

STUDY ON GREY FORECASTING MODEL OF COPPER EXTRACTION RATE WITH BIOLEACHING OF PRIMARY SULFIDE ORE

A model GM （grey model） （1,1） for forecasting the rate of copper extraction during the bioleaching of primary sulphide ore was established on the basis of the mathematical theory and the modeling process of grey system theory. It was used for forecasting the rate of copper extraction from the primary sulfide ore during a laboratory microbial column leaching experiment. The precision of the forecasted results were examined and modified via ＂posterior variance examination＂. The results show that the forecasted values coincide with the experimental values. GM （1,1） model has high forecast accuracy; and it is suitable for simulation control and prediction analysis of the original data series of the processes that have grey characteristics, such as mining, metallurgical and mineral processing, etc. The leaching rate of such copper sulphide ore is low. The grey forecasting result indicates that the rate of copper extraction is approximately 20% even after leaching for six months.

Enhanced copper recovery from low grade copper sulfide ores through bioleaching using residues produced by fermentation of agricultural wastes

Effects of residues produced by agricultural wastes fermentation(AWF)on low grade copper sulfide ores bioleaching,copper recovery,and microbial community were investigated.The results indicated that adding appropriate bulk of AWF made contributions to low grade copper sulfide ores bioleaching,which may be mainly realized through reducing the passivation layer formed by Fe3+hydrolysis.Improved copper recovery(78.35%)and bacteria concentration(9.56×10^(7)cells·mL^(−1))were yielded in the presence of 5 g·L^(−1)AWF.The result of 16S rDNA analysis demonstrated that microbial community was differentiated by adding AWF.Bacteria proportion,such as Acidithiobacillus ferrooxidans,Moraxella osloensis,and Lactobacillus acetotolerans changed distinctly.Great difference between samples was showed according to beta diversity index,and the maximum value reached 0.375.Acidithiobacillus ferrooxidans accounted for the highest proportion throughout the bioleaching process,and that of sample in the presence of 5 g·L^(−) AWF reached 28.63%.The results should show reference to application of agricultural wastes and low grade copper sulfide ores.

Recent advances in the utilization of copper sulfide compounds for electrochemical CO2 reduction

Converting carbon dioxide(CO2)into value-added chemicals by CO2 reduction has been considered as a potential way to solve the current energy crisis and environmental problem.Among the methods of CO2 reduction,the electrochemical method has been widely used due to its mild reaction condition and high reaction efficiency.In the electrochemical reduction system,the CO2 electrocatalyst is the most important part.Although many CO2 electrocatalysts have been developed,efficient catalysts with high activity,selectivity and stability are still lacking.Copper sulfide compound,as a low-toxicity and emerging material,has broad prospects in the field of CO2 reduction due to its unique structural and electrochemical properties.Much progress has been achieved with copper sulfide nanocrystalline and the field is rapidly developing.This paper summarizes the preparation,recent progress in development,and factors affecting the electrocatalytic CO2 reduction performance with copper sulfide compound as a catalyst.Prospects for future development are also outlined,with the aim of using copper sulfide compound as a highly active and stable electrocatalyst for CO2 reduction.

The Mechanism of Structural Control of Ore Formation and Geochemical Characteristics in the Massive Sulfide Deposits of the Wushan Copper Ore Field,Jiangxi

The ore-controlling mechanism of the bedding fault system in the massive sulfide deposits of the Wushancopper orefield may be generalized as the control of ore deposition by optimum surface in an ore-formingstructural trap. The mechanism has three major features: (1) timing of mineralization; (2) positioning of hostformation; and (3) dependence of ore-controlling structure on properties of rocks. The 'optimum surface' is adivisional structural plane which marks obvious difference in physical, chemical and mechanical properties andis favorable for mineralization. It is also a unity of structures. lithofacies and orebodies. The structural and geochemical characteristics of the ore deposits indicate the migration trend of the ma-jor characteristic clements in the ore-controlling fault belt: elements with a small radius (Si, Fe, Mg and Al)moved towards and concentrated at the center of the belt while large-radius ones (Ca, K and Na) were remotefrom the center.

Mild-temperature Synthesis of Covellite Copper Sulfide Hexagonal Nanoplatelets via the Hydrothermal Route

Covellite CuS hexagonal nanoplatelets were prepared by a simple hydrothermal process at mild temperature, using sodium dodecyl benzene sulfonate （SDBS） as an assisting reagent. The products were characterized by X-ray powder diffraction （XRD）, transmission electron microscopy （TEM） and UV-vis absorption spectroscopy. An energy-dispersive X-ray spectrometer （EDS） was used to analyze the elementary compositions of the intermediate products. A possible formation mechanism of hexagonal nanoplatelets is discussed, using TEM observations.

L-Cysteine-assisted Synthesis of Copper Gallium Sulfide Microspheres

An effective L-cysteine-assisted synthetic route has been successfully developed to prepare copper gallium sulfide（CuGaS2） microspheres under solvothermal conditions with CuCI2.2HzO, GaC13 and L-cysteine as source materials, in which L-cysteine was used as the sulfide source and complexing molecule. The experiments revealed that the synthesized sample was of a typical CuGaS2 tetragonal structure. Moreover, the prepared CuGaS2 crystals consisting of microspheres made up of nanoflakes, and the diameter of the nanoflakes was about 20 nm. Raman spectrum of the obtained CuGaS2 exhibits a high-intensity peak of the A1 mode at 306 cm^-1. Meanwhile, a possible growth mechanism was proposed based on the investigations.

Isothermal precipitation behavior of copper sulfide in ultra low carbon steel

Copper and sulfur are typical residual elements or impurity elements in steel.Sufficient removal of them during steelmaking process is difficult for copper and costly for sulfur.Utilization of copper and sulfur in steel, especially in steel scrap,has been an important issue for a long period for metallurgists.Copper and sulfur may combine to form copper sulfide,which may provide a prospect to avoid the detrimental effects of copper and sulfur in steel.Unfortunately the formation mechanism of copper sulfide in steel has not been completely clarified so far. In the present paper,solution treatment of samples containing copper and sulfur are firstly performed at 1623 K for 2.7×10~3 s followed by quenching into water.The samples are then isothermally heat-treated at 673 K,873 K, 1073 K,1273 K and 1373K for different time followed by quenching into water again.The size,morphology, constituent and crystallography of sulfide precipitates in these samples are investigated by scanning electron microscope(SEM) and TEM equipped with EDS.Fine copper sulfides(less than 100 nm) are observed to coexist with silicon oxide in samples even isothermally heat-treated at 1 373 K for 1.44×10~4 s;Film-like copper sulfides are generally observed to co-exist with iron sulfide in all samples;Plate-like copper sulfides are observed especially in sample isothermally heat-treated at 1 073 K for 1.44×10~4 s.The formation mechanisms of these copper sulfides have been discussed.

Precise phase adjustment and antibacterial property of copper sulfide particles in confined mesoporous silica nanoreactor

Bacteria-caused wound infection greatly threatens human health,thus developing an efficient and safe antibacterial agent without drug resistance is still a great challenge.Herein,a confined vulcanization strategy is proposed to construct copper sulfides-loaded dual-mesoporous silica nanospheres(Cux-Sy@DMSNs)with various crystal phases for reactive oxygen species(ROS)-mediated and photothermal antibacterial application.With the pore confinement of DMSNs,the crystal phases of copper sulfides including CuS,Cu_(9)S_(5)and Cui.96S can be easily controlled by changing the vulcanization temperature.The relationships between the crystal phases and photothermal properties as well as peroxidase-like activity of copper sulfides were systematically investigated.Results show that the obtained CuS@DMSNs exhibited higher photothermal ability with remarkable photothermal conversion efficiency of 36.86%in the second near-infrared region(NIR-II)and better peroxidase-like activity,compared to those of Cu_(9)S_(5)@DMSNs and Cu_(1.96)S@DMSNs.As a result,the in vitro experiments showed the good antibacterial effect against both gram-negative E.coli and gram-positive S.aureus under 1064 nm laser irradiation and the presence of H_(2)O_(2).Besides,the CCK-8 assay indicated that CuS@p-DMSNs have minimal cytotoxicity against normal human umbilical vein endothelial cells at the ranged concentrations.Therefore,the resultant CuS@p-DMSNs could act as a promising antibacterial agent for deep wound bacterial infection treatment.

Combination losartan with hyaluronic acid modified diethyldithiocarbamate loaded hollow copper sulfide nanoparticles for the treatment of breast cancer and metastasis

The application of photothermal therapy(PTT)is greatly limited by the low accumulation of photothermal agents,uneven photothermal distribution,and heat endurance of cancer cells.Worse still,despite PTT enhances immunogenicity,the anti-tumor immune efficacy is still unsatisfactory due to the inefficient immunogenic cell death(ICD)induction and poor infiltration of immune cells.To solve the above problems of PTT,we developed hyaluronic acid(HA)modified hollow copper sulfide nanoparticles encapsulating diethyldithiocarbamate(DDTC)to construct a breast tumor targeting and near infrared(NIR)photo-responsive drug delivery system(D-HCuS@HA),which further combined with losartan to improve the accumulation and penetration in the tumor site.Upon irradiation,D-HCuS@HA realized enhanced PTT and released cytotoxic Cu(DDTC)_(2)to eliminate heat endurance tumor cells,thereby enhancing antitumor effect and inducing effective ICD.Moreover,the combination with losartan could remodel the tumor microenvironment,allowing more T cells to infiltrate into the tumor,and significantly inhibiting the occurrence and development of metastatic tumors.In vitro/vivo results revealed the great potential of D-HCuS@HA combined with losartan,which provides a new paradigm for anti-tumor and anti-metastases.

Influence of copper on quality of hot strips by EAF-CSP process

Electron microscopy and X-ray Energy Dispersive Spectroscopy (XEDS) study on influence of Cu on low carbon hot strips produced by CSP (Compact Strip Production) process has been carried out. The results indicated that copper segregation and enrichment at interfacial layer between oxidized surface and steel matrix is the key factor, which results in microcracks and edge flaws on the strips. The primary considerations to prevent detrimental effects from Cu include controlling copper content in proper level, higher soaking temperature and non-oxidizable atmosphere during soaking. Copper sulfide precipitates with nanometers in size were observed, they may be beneficial to the properties of CSP products, and influence of Cu on quality of CSP hot strips is discussed.

High area-capacity Mg batteries enabled by sulfur/copper integrated cathode design

Rechargeable Mg batteries potentially display lower cost and competitive energy density compared with their Li-ion counterparts.However,the practical implementation of high area-capacity cathodes still remains a formidably challenging task.This work presents the sulfur/copper integrated cathodes fabricated by the conventional blade-coating process and slurry-dipping method.The sulfur/copper foil integrated cathodes deliver a high area-capacity of 2.6 mAh cm^(-2)after 40 cycles,while the sulfur/copperfoam integrated cathode exhibits an ultrahigh area-capacity of 35.4 mAh cm^(-2),corresponding to 743.1 Wh L^(-1)at the electrode level(1.5 times higher than the LiCoO_(2)-graphite system).The in-situ formed copper sulfide intermediates with sufficient cation defects can act as functional intermediates to regulate the sulfur electrochemistry during the first discharge process.The subsequent cycles are operated by the reversible displacement reaction between Mg-ions and copper sulfide active substances.In particular,the copper ions prefer to extrude along the[001]direction in copper sulfides lattice and simultaneously the rock-salt MgS crystals are generated.Besides,the nonuniform surface topography of the cycled Mgmetal anode,caused by the spatial inhomogeneity in current distribution,is demonstrated to lead to the battery performance degradation for high area-capacity Mg batteries.

Influence of copper on quality of hot strips by EAF-CSP process

Electron microscopy and X-ray Energy Dispersive Spectroscopy (XEDS) study oninfluence of Cu on low carbon hot strips produced by CSP (Compact Strip Production) process has beencarried out. The results indicated that copper segregation and enrichment at interfacial layerbetween oxidized surface and steel matrix is the key factor, which results in microcracks and edgeflaws on the strips. The primary considerations to prevent detrimental effects from Cu includecontrolling copper content in proper level, higher soaking temperature and non-oxidizable atmosphereduring soaking. Copper sulfide precipitates with nanometers in size were observed, they may bebeneficial to the properties of CSP products, and influence of Cu on quality of CSP hot strips isdiscussed.

Copper(Ⅱ) sulfide nanostructures and its nanohybrids: recent trends, future perspectives and current challenges

Among various metal chalcogenides,metal oxides and phases of copper sulfide,copper(Ⅱ)sulfide(covellite,CuS)nanostructures have enjoyed special attentiveness from researchers and scientists across the world owing to their complicated structure,peculiar composition and valency,attractive and panoramic morphologies,optical and electrical conductivity,less toxicity,and biocompatibility that can be exploited in advanced and technological applications.This review paper presents a brief idea about crystal structure,composition,and various chemical methods.The mechanism and effect of reaction parameters on the evolution of versatile and attractive morphologies have been described.Physical properties of CuS and its hybrid nanostructures,such as morphology and optical,mechanical,electrical,thermal,and thermoelectrical properties,have been carefully reviewed.A concise account of CuS and its hybrid nanostructures’diverse applications in emerging and recent applications such as energy storage devices(lithium-ion batteries,supercapacitance),sensors,field emission,photovoltaic cells,organic pollutant removal,electromagnetic wave absorption,and emerging biomedical field(drug delivery,photothermal ablation,deoxyribonucleic acid detection,anti-microbial and theranostic)has also been elucidated.Finally,the prospects,scope,and challenges of CuS nanostructures have been discussed precisely.

镍精矿除铜的单纯形优化

本文简要叙述了单纯形优化的基本思想与寻优步骤。应用单纯形法对镍精矿—阳极泥—镍电解阳极液反应体系的深度除铜条件进行了寻优试验,其结果与前人的试验及工业实践基本相同,表明单纯形优化方法是确定多变量湿法冶金体系中某些重要因素的一种快速而简单的方法。

Improved electrical transport properties and optimized thermoelectric figure of merit in lithium-doped copper sulfides

Copper sulfide Cu2S is a p-type semiconducting compound that has attracted great attentions in the thermoelectric （TE） community most recently. Considering the intrinsic ultralow lattice thermal conductivity, the enhancement of TE performance in CuzS should be achieved through improving its electrical transport properties. To achieve this goal, lithium element was doped into CuzS in this study. A series of Cu2_xLixS samples with different Li contents （x = 0, 0.005, 0.010, 0.050, and 0.100） was synthesized by the melting-annealing method. When x 〈 0.05, the Cuz_xLixS samples are stable and pure phases, having the same monoclinic structure with the pristine Cu2S at room temperature. The electrical conductivities in the Cu2_xLixS samples are greatly improved with the Li-doping content increasing due to the enhanced carrier concentrations. Meanwhile, doping Li into CuzS increases the ionic activation energy and lessens the influence of mobile Cu ions on the heat-carrying phonons. Thus, the thermal conductivities of the Li-doped Cu2S samples increase. A maximal figure of merit （zT） of 0.84 at 900 K is obtained in Cul.99Lio.018, about 133% improvement as compared with that in Cu2S matrix.

Chalcocite(bio)hydrometallurgy-current state,mechanism,and future directions:A review

There has been a strong interest in technologies suited for mining and processing of low-grade ores because of the rapid depletion of mineral resources in the world.In most cases,the extraction of copper from such raw materials is achieved by applying the leaching procedures.However,its low extraction efficiency and the long extraction period limit its large-scale commercial applications in copper recovery,even though bioleaching has been widely employed commercially for heap and dump bioleaching of secondary copper sulfide ores.Overcoming the technical challenges requires a better understanding of leaching kinetics and on-site microbial activities.Herein,this paper reviews the current status of main commercial biomining operations around the world,identifies factors that affect chalcocite dissolution both in chemical leaching and bioleaching,summarizes the related kinetic research,and concludes with a discussion of two on-site chalcocite heap leaching practices.Further,the challenges and innovations for the future development of chalcocite hydrometallurgy are presented in the end.

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Owing to their high performance and earth abundance,copper sulfides(Cu_(2-x)S)have attracted wide attention as a promising medium-temperature thermoelectric material.Nanostructure and grain-boundary engineering are explored to tune the electrical transport and phonon scattering of Cu_(2-x)S based on the liquid-like copper ion.Here multiscale architecture-engineered Cu_(2-x)S are fabricated by a room-temperature wet chemical synthesis combining mechanical mixing and spark plasma sintering.The observed electrical conductivity in the multiscale architecture-engineered Cu_(2-x)S is four times as much as that of the Cu_(2-x)S sample at 800 K,which is attributed to the potential energy filtering effect at the new grain boundaries.Moreover,the multiscale architecture in the sintered Cu_(2-x)S increases phonon scattering and results in a reduced lattice thermal conductivity of 0.2 W·m^(-1)·K^(-1) and figure of merit(zT)of 1.0 at 800 K.Such a zT value is one of the record values in copper sulfide produced by chemical synthesis.These results suggest that the introduction of nanostructure and formation of new interface are effective strategies for the enhancement of thermoelectric material properties.

Electrochemical Characteristics of Natural Mineral Covellite

Electrochemical characteristics of covellite (CuS) are of importance from flotation and metallurgical point of view, as well as due to its potential application in solid state solar cells and in photocatalytic reactions. Also, the compound CuS appears as an intermediary product or a final product in electrochemical oxidation reactions of chalcocite (Cu2S) which exhibits supercapacitor characteristics. Natural copper mineral covellite has been investigated in inorganic sulfate acid electrolytes, as well as in strong alkaline electrolyte. Physical properties of covellite were characterized by X-ray diffraction (XRD) and the active surface was examined by optical and electron microscopy (EM) before and after oxidation in galvanostatic regime. Different electrochemical methods (galvanostatic, potentiostatic, cyclic voltammetry and electrochemical impedance spectroscopy - EIS) have been used. The capacitance of around 21 Fcm-2 (geometric area), serial resistance of about 90 Ωcm2 and leakage resistance of about 1200 Ωcm2 have been measured in 1 M H2SO4. The addition of cupric ions in sulfate electrolyte leads to the significant increasing of the capacitance, but having the increase of self-discharge as a negative side phenomenon. The capacitance of around 6.7 Fcm-2 (geometric area), serial resistance of about 80 Ωcm2 and leakage resistance of about 380 Ωcm2 have been measured in 6 M KOH.

CuS Electrode for All-pH Electrolyte in Aqueous Batteries

With their excellent safety, affordability, environmental friendliness and high ionic conductivity, aqueous batteries are prospective contenders to replace lithium-ion batteries. However, the pH of aqueous electrolyte might impact the battery’s electrochemical performance and even its normal operation. It is critical to develop an electrode that can work in different pH settings. The hydrothermal method and vulcanization treatment were used to successfully create copper sulfide(CuS) nanosheet in this work. It can store and transport nonmetal and metal ions as well as polyvalent ions with a high charge radius ratio, and function normally under a variety of pH conditions. The CuS electrode has a considerable capacity(900 mA·h/g) and rate performance under alkaline conditions, as well as an ultra-long discharge platform, which contribute to 80% of the total capacity.