The sulfur phase in high sulfur-containing bauxite was studied by an X-ray diffraction analysis and a chemistry quantitative analysis.The methods for the removal of different shaped sulfur were also discussed.The resu...The sulfur phase in high sulfur-containing bauxite was studied by an X-ray diffraction analysis and a chemistry quantitative analysis.The methods for the removal of different shaped sulfur were also discussed.The results show that sulfur phases in high sulfur-containing bauxites exist in the main form of sulfide sulfur （pyrite） or sulfate sulfur,and the main sulfur forms of bauxites from different regions are not the same.Through a combination of an X-ray diffraction analysis and a chemistry quantitative analysis,the sulfur phases of high sulfur-containing bauxite could be accurately investigated.Deciding the main sulfur form of high sulfur-containing bauxite could provide theoretical instruction for choosing methods for the removal of sulfur from bauxite,and an oxidizing-roasting process is an effective way to remove sulfide sulfur from high sulfur-containing bauxite,the content of S^2-in crude ore in the digestion liquor is above 1.7 g/L,but in the roasted ore digestion liquor,it is below 0.18 g/L.Using the sodium carbonate solution washing technology to wash bauxite can effectively remove sulfate sulfur,the content of the total sulfur in ore is lowered to below 0.2% and can meet the production requirements for the sulfur content.展开更多
A facile one-step co-precipitation method was demonstrated to fabricate amorphous sulfurcontaining calcium phosphate （SCP） nanoparticles, in which the sulfur group was in-situ introduced into calcium phosphate. The ...A facile one-step co-precipitation method was demonstrated to fabricate amorphous sulfurcontaining calcium phosphate （SCP） nanoparticles, in which the sulfur group was in-situ introduced into calcium phosphate. The resulting SCP exhibited a noticeable enhanced performance for Pb（II） removal in comparison with hydroxyapatite （HAP）, being capable of easily reducing 20 ppm of Pb（II） to below the acceptable standard for drinking water within less than 10 min. Remarkably, the saturated removal capacities of Pb（II） on SCP were as high as 1720.57 mg/g calculated by the Langmuir isotherm model, exceeding largely that of the previously reported absorbents. Significantly, SCP displayed highly selective removal ability toward Pb（II） ions in the presence of the competing metal ions （Ni（II）, Co（II）, Zn（II）, and Cd（II））. Further investigations indicated that such ultra-high removal efficiency and preferable affinity of Pb（II） ions on SCP may be reasonably ascribed to the formation of rodlike hydroxypyromorphite crystals on the surface of SCP via dissolution-precipitation and ion exchange reactions, accompanied by the presence of lead sulfide precipitates. High removal efficiency, fast removal kinetics and excellent selectivity toward Pb（II） made the obtained SCP material an ideal candidate for Pb（II） ions decontamination in practical application.展开更多
Alkaline sulfur-containing lixiviants,including thiosulfate,polysulfides,and alkaline sulfide solutions,stand out as a promising class of alternatives to cyanide because of their low toxicity,high efficiency,and stron...Alkaline sulfur-containing lixiviants,including thiosulfate,polysulfides,and alkaline sulfide solutions,stand out as a promising class of alternatives to cyanide because of their low toxicity,high efficiency,and strong adaptability.In this paper,we summarized the research progress and remaining challenges in gold extraction using these noncyanide reagents.After a brief introduction to the preparation method,the transformation process of various sulfur-containing species in alkaline solutions was discussed.Thereafter,some insights into the mechanism of gold leaching in alkaline sulfur-containing solutions were presented from different aspects,including thermodynamics analysis,electrochemical dissolution,and leaching kinetics.Moreover,recent progress in in-situ generation of sulfur-containing anions from gold-bearing sulfide minerals was outlined as well.Gold passivation caused by sulfur species was discussed in particular because it is considered the greatest challenge facing sulfur-containing leaching systems.Alkaline sulfur-containing lixiviants are expected to serve as alternatives in industrial applications of gold extraction,particularly for refractory gold ores containing copper and carbonaceous matter.展开更多
In order to fundamentally solve the acidification problem of high sulfur-containing bauxite during storage, by simulating the environment of minerals storage in laboratory, the acidification mechanism and influencing ...In order to fundamentally solve the acidification problem of high sulfur-containing bauxite during storage, by simulating the environment of minerals storage in laboratory, the acidification mechanism and influencing factors of high sulfur-containing bauxite were studied and confirmed using the single variable method to control the atmosphere, water and other variables. The results show that the acidification is mostly caused by the oxidation of sulfur-containing bauxite, which is mainly the natural oxidation of Pyrite(Fe S2), then the alkaline minerals dissolute in the presence of water, leading to the acidification phenomenon, which is influenced by moisture and air flow. Finally, more acid-producing substances are formed, resulting in the acidification of high sulfur-containing bauxite. The acidification of high sulfur-containing bauxite results from the combined effect of the oxygen in the air and water, which can be significantly alleviated by controlling the diffusion of the oxygen in air.展开更多
Four new Schiff bases of 1,10-phenanthroline-2,9-dicarboxaldehyde with sulfur-containing amines such as 2-mercaptoaniline, S-alkyl/aryl dithiocarbazates and thiosemicarbazide have been synthesized and characterized by...Four new Schiff bases of 1,10-phenanthroline-2,9-dicarboxaldehyde with sulfur-containing amines such as 2-mercaptoaniline, S-alkyl/aryl dithiocarbazates and thiosemicarbazide have been synthesized and characterized by spectroscopic and X-ray crystallographic techniques. A comparative study of the methods of synthesis has been made using both traditional and microwave techniques. A significant reduction in reaction time has been observed when the microwave method was used. In some of the reactions, the yields also increased significantly.展开更多
Structural and thermodynamic parameters of 56 oxygen-containing and 56 sulfur- containing organic compounds were computed at the B3LPY/6-311G＊＊ level using density functional theory （DFT） method. Furthermore,the d...Structural and thermodynamic parameters of 56 oxygen-containing and 56 sulfur- containing organic compounds were computed at the B3LPY/6-311G＊＊ level using density functional theory （DFT） method. Furthermore,the dependent equations between the experimental data of boiling points （Tb） and theoretical parameters were proposed with SPSS12.0 for windows software,whose correlation coefficients R2 are 0.933 and 0.945. These dependent equations were validated by cross-validation method （q2 are 0.923 and 0.929,respectively）. VIF （variance inflation factors） and t-value methods were also used to verify the significance and self-correlationship of each variable. Results indicate that our dependent equation exhibits good prediction ability,and molecular polarizability （α） is the main factor affecting the Tb of oxygen- and sulfur-containing organic compounds. To our interest,obvious dependence could also be found among the oxygen- and sulfur-containing organic compounds＇ experimental data of boiling points （Tb） with R^2 of 0.857.展开更多
CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of Ce...CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of CeO_2–CaO–Pd/HZSM-5 was investigated to ensure that the kinetics experimental results were not significantly influenced by induction period and catalytic deactivation. A large number of kinetic data points(40 sets) were obtained over a range of temperature(240–300 °C), pressure(3–4 MPa), gas hourly space velocity(GHSV)(2000–3000 L·kg^(-1)·h^(-1)) and H_2/CO mole ratio(2–3). Kinetic model for the methanol synthesis reaction and the dehydration of methanol were obtained separately according to reaction mechanism and Langmuir–Hinshelwood mechanism. Regression parameters were investigated by the method combining the simplex method and Runge–Kutta method. The model calculations were in appropriate accordance with the experimental data.展开更多
Since the most sensitive resonance lines of nonmetallic elements are situated in vacuum ultraviolet region （below 190 nm）, they can not be directly determined with a common AAS instrument covering the spectral range...Since the most sensitive resonance lines of nonmetallic elements are situated in vacuum ultraviolet region （below 190 nm）, they can not be directly determined with a common AAS instrument covering the spectral range from 190 to 700 nm. The molecular absorption spectrometry is often used for the determination of nonmetallic elements. Syty et al. used vapor molecular absorption spectrometry（VMAS） to determine the sulfur dioxide and sulfide, in which a hydrogen hollow cathode lamp was used as a continuum source to determine SO;at 210 nm and a deuterium arc展开更多
Thiobacillus ferrooxidans,abbreviated as T.ferrooxidans is one of the important microorganisms in the field of biological desulfurization.Effects of ferrous iron and sulfur-containing substrates on biological desulfur...Thiobacillus ferrooxidans,abbreviated as T.ferrooxidans is one of the important microorganisms in the field of biological desulfurization.Effects of ferrous iron and sulfur-containing substrates on biological desulfurization of T.ferrooxidans were studied.Results show that in the absence of Fe^(2+),T.ferrooxidans can utilize three kinds of sulfur-containing substrates of Na_(2)S_(2)O_(3),elemental S and Na_(2)SO_(3) for growth and metabolism.For utilization complexity,Na_(2)S_(2)O_(3) was easiest to use,next was elemental S,and Na_(2)SO_(3) was the worst for use.During the utilization of ferrous iron and sulfur-containing substrates by T.ferrooxidans,the iron oxidation system was first started.With the decrease of the Fe^(2+)concentration,the sulfur oxidation system was started,and then the two systems synergistically acted.The presence of three sulfur-containing substrates had different effects on Fe^(2+)oxidation,and elemental S did not inhibit the oxidation of Fe^(2+),while Na_(2)S_(2)O_(3) and Na_(2)SO_(3) had some inhibition on the oxidation of Fe^(2+),especially the inhibition of Na_(2)SO_(3) was significant,and complete oxidation of ferrous iron needed more time.The isolated T.ferrooxidans is applied to the removal of H2S gas,aiming to provide a new technological approach for biological removal of H2S.展开更多
Unsymmetric sulfides and selenides have great applications in the pharmaceutical field.Herein,we describe the reductive coupling reaction of xanthate esters with sulfur-containing and selenium-containing compounds(thi...Unsymmetric sulfides and selenides have great applications in the pharmaceutical field.Herein,we describe the reductive coupling reaction of xanthate esters with sulfur-containing and selenium-containing compounds(thio(seleno)sulfonates and disulfides(selenides))under the nickel-catalyzed condition.It provides a mild and effective method for the synthesis of unsymmetric sulfides and selenides which has the advantages of mild reaction conditions,high yields and a wide range of substrates.展开更多
丙氨酸的四氢呋喃悬浮液在0℃下缓慢通入过量的干燥光气后升温至30℃合成得到了L 丙氨酸 N 羧基 环内酸酐(L Ala NCAn),研究了L Ala NCAn的开环聚合反应以及反应过程中溶剂、温度、引发剂及用量对聚合物特性黏度的影响。利用红外光谱确...丙氨酸的四氢呋喃悬浮液在0℃下缓慢通入过量的干燥光气后升温至30℃合成得到了L 丙氨酸 N 羧基 环内酸酐(L Ala NCAn),研究了L Ala NCAn的开环聚合反应以及反应过程中溶剂、温度、引发剂及用量对聚合物特性黏度的影响。利用红外光谱确认了所得单体和聚合产物。用硝基苯作溶剂,三乙胺作引发剂,所得聚合物特性黏度为[η]=0 83dL/g。考虑到强酸对生物高分子的降解作用,实验中测定了二氯乙酸(DCA)对聚合物特性黏度的影响,结果发现二氯乙酸对聚丙氨酸特性黏度无影响。展开更多
Triphosgene was used to react with γ-chloroethyl glutamate, which was synthesized from 2-ethylene chlorohydrin and L-glutamic acid, to give γ-chloroethyl glutamate N-carboxyan.hydride (NCA). Thus, poly(γ-chloroethy...Triphosgene was used to react with γ-chloroethyl glutamate, which was synthesized from 2-ethylene chlorohydrin and L-glutamic acid, to give γ-chloroethyl glutamate N-carboxyan.hydride (NCA). Thus, poly(γ-chloroethyl glutamate), a new poly (amino acid) with reactive chloride, was obtained from the NCA by using triethylamine as the initiator which can lead to intrinsic viscosity of polypeptide, [η], over 50 mL/g. NCA and polymer were characterized by IR, 1H NMR and 13C NMR. Oligomer of γ-chloroethyl glutamate was also obtained while NCA was initiated by moisture in air. The conforma- tions of oligomer and polymer of γ-chloroethyl glutamate were observed by IR and CD spectroscopy. The results suggested that the conformation of oligomer mainly be β-sheet, while the polymer be α-helix.展开更多
基金Project(20971041) supported by the National Natural Science Foundation of ChinaProject(09B032) supported by Scientific Research Fund of Hunan Provincial Education Department,China
文摘The sulfur phase in high sulfur-containing bauxite was studied by an X-ray diffraction analysis and a chemistry quantitative analysis.The methods for the removal of different shaped sulfur were also discussed.The results show that sulfur phases in high sulfur-containing bauxites exist in the main form of sulfide sulfur （pyrite） or sulfate sulfur,and the main sulfur forms of bauxites from different regions are not the same.Through a combination of an X-ray diffraction analysis and a chemistry quantitative analysis,the sulfur phases of high sulfur-containing bauxite could be accurately investigated.Deciding the main sulfur form of high sulfur-containing bauxite could provide theoretical instruction for choosing methods for the removal of sulfur from bauxite,and an oxidizing-roasting process is an effective way to remove sulfide sulfur from high sulfur-containing bauxite,the content of S^2-in crude ore in the digestion liquor is above 1.7 g/L,but in the roasted ore digestion liquor,it is below 0.18 g/L.Using the sodium carbonate solution washing technology to wash bauxite can effectively remove sulfate sulfur,the content of the total sulfur in ore is lowered to below 0.2% and can meet the production requirements for the sulfur content.
文摘A facile one-step co-precipitation method was demonstrated to fabricate amorphous sulfurcontaining calcium phosphate （SCP） nanoparticles, in which the sulfur group was in-situ introduced into calcium phosphate. The resulting SCP exhibited a noticeable enhanced performance for Pb（II） removal in comparison with hydroxyapatite （HAP）, being capable of easily reducing 20 ppm of Pb（II） to below the acceptable standard for drinking water within less than 10 min. Remarkably, the saturated removal capacities of Pb（II） on SCP were as high as 1720.57 mg/g calculated by the Langmuir isotherm model, exceeding largely that of the previously reported absorbents. Significantly, SCP displayed highly selective removal ability toward Pb（II） ions in the presence of the competing metal ions （Ni（II）, Co（II）, Zn（II）, and Cd（II））. Further investigations indicated that such ultra-high removal efficiency and preferable affinity of Pb（II） ions on SCP may be reasonably ascribed to the formation of rodlike hydroxypyromorphite crystals on the surface of SCP via dissolution-precipitation and ion exchange reactions, accompanied by the presence of lead sulfide precipitates. High removal efficiency, fast removal kinetics and excellent selectivity toward Pb（II） made the obtained SCP material an ideal candidate for Pb（II） ions decontamination in practical application.
基金the National Natural Science Foundation of China(No.51574018).
文摘Alkaline sulfur-containing lixiviants,including thiosulfate,polysulfides,and alkaline sulfide solutions,stand out as a promising class of alternatives to cyanide because of their low toxicity,high efficiency,and strong adaptability.In this paper,we summarized the research progress and remaining challenges in gold extraction using these noncyanide reagents.After a brief introduction to the preparation method,the transformation process of various sulfur-containing species in alkaline solutions was discussed.Thereafter,some insights into the mechanism of gold leaching in alkaline sulfur-containing solutions were presented from different aspects,including thermodynamics analysis,electrochemical dissolution,and leaching kinetics.Moreover,recent progress in in-situ generation of sulfur-containing anions from gold-bearing sulfide minerals was outlined as well.Gold passivation caused by sulfur species was discussed in particular because it is considered the greatest challenge facing sulfur-containing leaching systems.Alkaline sulfur-containing lixiviants are expected to serve as alternatives in industrial applications of gold extraction,particularly for refractory gold ores containing copper and carbonaceous matter.
基金Project(2013AA064102)supported by the National High Technology Research and Development Program of China
文摘In order to fundamentally solve the acidification problem of high sulfur-containing bauxite during storage, by simulating the environment of minerals storage in laboratory, the acidification mechanism and influencing factors of high sulfur-containing bauxite were studied and confirmed using the single variable method to control the atmosphere, water and other variables. The results show that the acidification is mostly caused by the oxidation of sulfur-containing bauxite, which is mainly the natural oxidation of Pyrite(Fe S2), then the alkaline minerals dissolute in the presence of water, leading to the acidification phenomenon, which is influenced by moisture and air flow. Finally, more acid-producing substances are formed, resulting in the acidification of high sulfur-containing bauxite. The acidification of high sulfur-containing bauxite results from the combined effect of the oxygen in the air and water, which can be significantly alleviated by controlling the diffusion of the oxygen in air.
文摘Four new Schiff bases of 1,10-phenanthroline-2,9-dicarboxaldehyde with sulfur-containing amines such as 2-mercaptoaniline, S-alkyl/aryl dithiocarbazates and thiosemicarbazide have been synthesized and characterized by spectroscopic and X-ray crystallographic techniques. A comparative study of the methods of synthesis has been made using both traditional and microwave techniques. A significant reduction in reaction time has been observed when the microwave method was used. In some of the reactions, the yields also increased significantly.
基金Supported by the State Science Foundation of China (No. 20737001)
文摘Structural and thermodynamic parameters of 56 oxygen-containing and 56 sulfur- containing organic compounds were computed at the B3LPY/6-311G＊＊ level using density functional theory （DFT） method. Furthermore,the dependent equations between the experimental data of boiling points （Tb） and theoretical parameters were proposed with SPSS12.0 for windows software,whose correlation coefficients R2 are 0.933 and 0.945. These dependent equations were validated by cross-validation method （q2 are 0.923 and 0.929,respectively）. VIF （variance inflation factors） and t-value methods were also used to verify the significance and self-correlationship of each variable. Results indicate that our dependent equation exhibits good prediction ability,and molecular polarizability （α） is the main factor affecting the Tb of oxygen- and sulfur-containing organic compounds. To our interest,obvious dependence could also be found among the oxygen- and sulfur-containing organic compounds＇ experimental data of boiling points （Tb） with R^2 of 0.857.
基金Supported by the National Natural Science Foundation of China(51204179,51204182,51674256)The Natural Science Foundation of Jiangsu Province,China(BK20141242)
文摘CeO_2–CaO–Pd/HZSM-5 catalyst was prepared for the dimethyl ether(DME) one-step synthesis in a continuous fixed-bed micro-reactor from the sulfur-containing syngas. The catalytic stability over hybrid catalyst of CeO_2–CaO–Pd/HZSM-5 was investigated to ensure that the kinetics experimental results were not significantly influenced by induction period and catalytic deactivation. A large number of kinetic data points(40 sets) were obtained over a range of temperature(240–300 °C), pressure(3–4 MPa), gas hourly space velocity(GHSV)(2000–3000 L·kg^(-1)·h^(-1)) and H_2/CO mole ratio(2–3). Kinetic model for the methanol synthesis reaction and the dehydration of methanol were obtained separately according to reaction mechanism and Langmuir–Hinshelwood mechanism. Regression parameters were investigated by the method combining the simplex method and Runge–Kutta method. The model calculations were in appropriate accordance with the experimental data.
文摘Since the most sensitive resonance lines of nonmetallic elements are situated in vacuum ultraviolet region （below 190 nm）, they can not be directly determined with a common AAS instrument covering the spectral range from 190 to 700 nm. The molecular absorption spectrometry is often used for the determination of nonmetallic elements. Syty et al. used vapor molecular absorption spectrometry（VMAS） to determine the sulfur dioxide and sulfide, in which a hydrogen hollow cathode lamp was used as a continuum source to determine SO;at 210 nm and a deuterium arc
基金financially supported by the Research Initiation Fund of Henan Finance University(Grant No.2022BS013).
文摘Thiobacillus ferrooxidans,abbreviated as T.ferrooxidans is one of the important microorganisms in the field of biological desulfurization.Effects of ferrous iron and sulfur-containing substrates on biological desulfurization of T.ferrooxidans were studied.Results show that in the absence of Fe^(2+),T.ferrooxidans can utilize three kinds of sulfur-containing substrates of Na_(2)S_(2)O_(3),elemental S and Na_(2)SO_(3) for growth and metabolism.For utilization complexity,Na_(2)S_(2)O_(3) was easiest to use,next was elemental S,and Na_(2)SO_(3) was the worst for use.During the utilization of ferrous iron and sulfur-containing substrates by T.ferrooxidans,the iron oxidation system was first started.With the decrease of the Fe^(2+)concentration,the sulfur oxidation system was started,and then the two systems synergistically acted.The presence of three sulfur-containing substrates had different effects on Fe^(2+)oxidation,and elemental S did not inhibit the oxidation of Fe^(2+),while Na_(2)S_(2)O_(3) and Na_(2)SO_(3) had some inhibition on the oxidation of Fe^(2+),especially the inhibition of Na_(2)SO_(3) was significant,and complete oxidation of ferrous iron needed more time.The isolated T.ferrooxidans is applied to the removal of H2S gas,aiming to provide a new technological approach for biological removal of H2S.
基金National Natural Science Foundation of China(Nos.21971174 and U2267224),PAPD,Cyrus Tang(Zhongying)Scholar,Jiangsu Qing-Lan Project for Young and Middle-aged Academic Leaders(2023)and Soochow University for financialsupport.
文摘Unsymmetric sulfides and selenides have great applications in the pharmaceutical field.Herein,we describe the reductive coupling reaction of xanthate esters with sulfur-containing and selenium-containing compounds(thio(seleno)sulfonates and disulfides(selenides))under the nickel-catalyzed condition.It provides a mild and effective method for the synthesis of unsymmetric sulfides and selenides which has the advantages of mild reaction conditions,high yields and a wide range of substrates.
文摘丙氨酸的四氢呋喃悬浮液在0℃下缓慢通入过量的干燥光气后升温至30℃合成得到了L 丙氨酸 N 羧基 环内酸酐(L Ala NCAn),研究了L Ala NCAn的开环聚合反应以及反应过程中溶剂、温度、引发剂及用量对聚合物特性黏度的影响。利用红外光谱确认了所得单体和聚合产物。用硝基苯作溶剂,三乙胺作引发剂,所得聚合物特性黏度为[η]=0 83dL/g。考虑到强酸对生物高分子的降解作用,实验中测定了二氯乙酸(DCA)对聚合物特性黏度的影响,结果发现二氯乙酸对聚丙氨酸特性黏度无影响。
文摘Triphosgene was used to react with γ-chloroethyl glutamate, which was synthesized from 2-ethylene chlorohydrin and L-glutamic acid, to give γ-chloroethyl glutamate N-carboxyan.hydride (NCA). Thus, poly(γ-chloroethyl glutamate), a new poly (amino acid) with reactive chloride, was obtained from the NCA by using triethylamine as the initiator which can lead to intrinsic viscosity of polypeptide, [η], over 50 mL/g. NCA and polymer were characterized by IR, 1H NMR and 13C NMR. Oligomer of γ-chloroethyl glutamate was also obtained while NCA was initiated by moisture in air. The conforma- tions of oligomer and polymer of γ-chloroethyl glutamate were observed by IR and CD spectroscopy. The results suggested that the conformation of oligomer mainly be β-sheet, while the polymer be α-helix.
基金supported by the National Natural Science Foundation of China(21374080,21674081,21611130175)Shanghai International Scientific Collaboration Fund,China(15230724500)+1 种基金Shanghai 1000 Talents PlanFundamental Research Funds for the Central Universities,China(0500219211,1500219107)
