Django框架下的Sun求职平台构建与功能实现

本文基于Django框架,设计与实现了Sun求职平台,旨在为求职者和招聘方提供一个高效、便捷的互联网招聘平台。通过采用Django的模型-视图-控制器(Model-View-Controller)架构,实现了用户注册、登录、简历上传、职位发布等核心功能。在前端方面,采用了Bootstrap框架进行页面布局,使界面简洁美观且具有响应性。在后端方面,利用Django的ORM系统实现了数据库的管理和交互,确保了系统的稳定性和安全性。通过整合第三方认证系统,提高了用户体验的同时,保障了信息的真实性。最终,Sun求职平台通过完善的功能和友好的界面,为求职者和企业搭建了一个高效的沟通桥梁,促进了人才与岗位的精准匹配。

Sunspot Group Detection and Classification by Dual Stream Convolutional Neural Network Method

The automatic detection and analysis of sunspots play a crucial role in understanding solar dynamics and predicting space weather events.This paper proposes a novel method for sunspot group detection and classification called the dual stream Convolutional Neural Network with Attention Mechanism(DSCNN-AM).The network consists of two parallel streams each processing different input data allowing for joint processing of spatial and temporal information while classifying sunspots.It takes in the white light images as well as the corresponding magnetic images that reveal both the optical and magnetic features of sunspots.The extracted features are then fused and processed by fully connected layers to perform detection and classification.The attention mechanism is further integrated to address the“edge dimming”problem which improves the model’s ability to handle sunspots near the edge of the solar disk.The network is trained and tested on the SOLAR-STORM1 data set.The results demonstrate that the DSCNN-AM achieves superior performance compared to existing methods,with a total accuracy exceeding 90%.

Frontogenesis and Frontolysis of a Cold Filament Driven by the Cross-Filament Wind and Wave Fields Simulated by a Large Eddy Simulation

The variations of the frontogenetic trend of a cold filament induced by the cross-filament wind and wave fields are studied by a non-hydrostatic large eddy simulation. Five cases with different strengths of wind and wave fields are studied.The results show that the intense wind and wave fields further break the symmetries of submesoscale flow fields and suppress the levels of filament frontogenesis. The changes of secondary circulation directions—that is, the conversion between the convergence and divergence of the surface cross-filament currents with the downwelling and upwelling jets in the filament center—are associated with the inertial oscillation. The filament frontogenesis and frontolysis caused by the changes of secondary circulation directions may periodically sharpen and smooth the gradient of submesoscale flow fields.The lifecycle of the cold filament may include multiple stages of filament frontogenesis and frontolysis.

The Influence of the Sun and Moon on the Observation of Very High Energy Gamma-ray Sources Using EAS Arrays

With great advance of ground-based extensive air shower arrays,such as LHAASO and HAWC,many very high energy(VHE)gamma-ray sources have been discovered and are being monitored regardless of the day and the night.Hence,the Sun and Moon would have some impacts on the observation of gamma-ray sources,which have not been taken into account in previous analysis.In this paper,the influence of the Sun and Moon on the observation of very high energy gamma-ray sources when they are near the line of sight of the Sun or Moon is estimated.The tracks of all the known VHE sources are scanned and several VHE sources are found to be very close to the line of sight of the Sun or Moon during some period.The absorption of very high energy gamma rays by sunlight is estimated with detailed method and some useful conclusions are achieved.The main influence is the block of the Sun and Moon on gamma rays and the shadow on the cosmic ray background.The influence is investigated considering the detector angular resolution and some strategies on data analysis are proposed to avoid the underestimation of the gamma-ray emission.

Simple procedure for assessing diffuse subarachnoid hemorrhage successfully created using filament perforation method in mice

The murine model of subarachnoid hemorrhage(SAH)is a valuable experimental tool for investigating molecular and cellular mechanisms,and the endovascular filament perforation technique can be used to simulate prominent pathophysiological features observed after human SAH;however,current validation methods for assessing an appropriate SAH model are limited.Here,we introduce a simple procedure for se-lecting a mouse model of diffuse SAH.SAH was induced in 24 mice using a standard filament perforation method.After confirming survival at 24 h,SAH was scored 0-1 based on T2*-weighted images on whole-brain magnetic resonance imaging(MRI)and visual surveillance of the cisterna magna(CM)through the dura mater.The CM-based SAH grading correlated well with a reference parameter defined by extracted brain(r^(2)=0.53,p<0.0001).The receiver operating characteristic curve revealed a sensi-tivity of 85%and a specificity of 91%for detecting diffuse SAH,with a similar area under the curve(0.89±0.06[standard error of the mean])as the MRI-based grading(0.72±0.10,p=0.12).Our data suggest that confirming an SAH clot in the CM is a valuable way to select a clinically relevant diffuse SAH model that can be used in future experimental studies.

Solving the Olbers’s Paradox, Explaining the “Red-Shift”, and Challenging the Relativities by “Sun Matters Theory” and “Sun Model of Universe”, an Evolution of the Einstein’s Static Universe Model

Olbers’s paradox, known as the dark night paradox, is an argument in astrophysics that the darkness of the night sky conflicts with the assumption of an infinite and eternal static universe. Big-Bang theory was used to partially explain this paradox, while introducing new problems. Hereby, we propose a better theory, named Sun Matters Theory, to explain this paradox. Moreover, this unique theory supports and extended the Einstein’s static universe model proposed by Albert Einstein in 1917. Further, we proposed our new universe model, “Sun Model of Universe”. Based on the new model and novel theory, we generated innovative field equation by upgrading Einstein’s Field Equation through adding back the cosmological constant, introducing a new variable and modifying the gravitationally-related concepts. According to the Sun Model of Universe, the dark matter and dark energy comprise the so-called “Sun Matters”. The observed phenomenon like the red shift is explained as due to the interaction of ordinary light with Sun Matters leading to its energy and frequency decrease. In Sun Model, our big universe consists of many universes with ordinary matter at the core mixed and surrounded with the Sun Matters. In those universes, the laws of physics may be completely or partially different from that of our ordinary universe with parallel civilizations. The darkness of night can be easily explained as resulting from the interaction of light with the Sun Matters leading to the sharp decrease in the light intensity. Sun Matters also scatter the light from a star, which makes it shining as observed by Hubble. Further, there is a kind of Sun Matters named “Sun Waters”, surrounding every starts. When lights pass by the sun, the Sun Waters deflect the lights to bend the light path. According to the Sun Model, it is the light bent not the space bent that was proposed in the theory of relativities.

Jovian Planet Influence on the Forcing of Sunspot Cycles

The history of our solar system has been greatly influenced by the fact that there is a large gas giant planet, Jupiter that has a nearly circular orbit. This has allowed relics of the early solar system formation to still be observable today. Since Jupiter orbits the Sun with a period of approximately 12 years, it has always been thought that this could be connected to the nearly 11-year periodic peak in the number of sunspots observed. In this paper, the Sun and planets are considered to be moving about a center of mass point as the different planets orbit the Sun. This is the action of gravity that holds the solar system together. The center of mass for the Jupiter-Sun system actually lies outside the Sun. The four gas giant planets dominate such effects and the four gas giant Jovian planets can be projected together to determine an effective distance from the Sun’s center. Taken together these effects do seem to function as a sunspot forcing factor with a periodicity very close to 11 years. These predictions are made without consideration of any details of what is happening in the interior of the Sun. From these estimates, sunspot cycle 25 will be expected to peak in about September-October of 2025. Sunspot cycle 26 should peak in the year March of 2037.

Variation in the Flaring Potential of Different Sunspot Groups During Different Phases of Solar Cycles 23 and 24

In this present study,we have analyzed different types of X-ray solar flares(C,M,and X classes)coming out from different classes of sunspot groups(SSGs).The data which we have taken under this study cover the duration of 24 yr from 1996 to 2019.During this,we observed a total of 15015 flares(8417 in SC-23 and 6598 in SC-24)emitted from a total of 33780 active regions(21746 in SC-23 and 12034 in SC-24)with sunspot only.We defined the flaring potential or flare-production potential as the ratio of the total number of flares produced from a particular type of SSG to the total number of the same-class SSGs observed on the solar surface.Here we studied yearly changes in the flaring potential of different McIntosh class groups of sunspots in different phases of SC-23 and 24.In addition,we investigated yearly variations in the potential of producing flares by different SSGs(A,B,C,D,E,F,and H)during different phases(ascending,maximum,descending,and minimum)of SC-23 and 24.These are our findings:(1)D,E,and F SSGs have the potential of producing flares≥8 times greater than A,B,C and H SSGs;(2)The larger and more complex D,E,and F SSGs produced nearly 80%of flares in SC-23 and 24;(3)The A,B,C and H SSGs,which are smaller and simpler,produced only 20%of flares in SC-23 and 24;(4)The biggest and most complex SSGs of F-class have flaring potential 1.996 and 3.443 per SSG in SC-23 and 24,respectively.(5)The potential for producing flares in each SSG is higher in SC-24 than in SC-23,although SC-24 is a weaker cycle than SC-23.(6)The alterations in the number of flares(C+M+X)show different time profiles than the alterations in sunspot numbers during SC-23 and 24,with several peaks.(7)The SSGs of C,D,E,and H-class have the highest flaring potential in the descending phase of both SC-23 and 24.(8)F-class SSGs have the highest flaring potential in the descending phase of SC-23 but also in the maximum phase of SC-24.

New Insight to the Surface Temperature of the Sun

Information is given on thermal radiation from the Sun, considered in practical engineering calculations of heat exchange. It was found that although the surface temperature of the Sun is assumed to be about 5800 K, the solar spectrum data measured by Kondratyev lead to a value of at least 7134 K. Such a higher value can be obtained by interpreting the Planck formula for the black radiation spectrum for the Kondratyev data. In addition, using the Stefan-Boltzmann law, the energetic emissivity of the Sun’s surface was determined to be 0.431. Furthermore, based on Petela’s formulae for exergy of thermal radiation, the exergetic emissivity of the Sun’s surface was also calculated at the level of 0.426.

SunGas Renewables公司与C2X公司合作扩大北美绿色甲醇产能

SunGas Renewables公司和C2X公司宣布建立战略合作伙伴关系,共同在北美开发和运营多个绿色甲醇生产设施,以增加可持续燃料的供应,并推进全球难减排行业的脱碳。SunGas Renewables公司是GTI Energy公司的分拆公司,是为可再生燃料生产提供成熟工艺技术和设备的领导者。

Simulation and Performance Analysis of Six Types of Sun Tracker Approaches:A Comparative Analysis for Solar Concentrating Technology Application at Burkina Faso

Modelization equations of six approaches for tracking the sun are recalled and used to evaluate the constraints and performances to which they lead to.The geographical study case is taken for the specific latitude of 12 North that is a good matching with the location of the country of Burkina Faso.Three decisive periods were locally established in order to consider the different travels of the sun on sky during one year.This work presents some technical data which facilitates the choice of sun tracking approaches with concern of a concentrator limits such as its angle of acceptance,its motion control card interpolation model,or its minimum irradiation level for energy conversion effectiveness.

上皮性卵巢癌组织中LRRC15、SUN2表达变化及其与患者预后的关系

目的探讨富含亮氨酸重复序列15(LRRC15)、SUN结构域蛋白2(SUN2)在上皮性卵巢癌(EOC)组织中的表达变化及其与患者预后的关系。方法选取102例EOC患者手术切除癌组织(观察组),以60例因卵巢良性囊肿行手术治疗的正常卵巢组织为对照组。采用免疫组化法检测癌及正常卵巢组织中LRRC15、SUN2表达。通过Spearman秩相关分析评估LRRC15与SUN2表达的相关性,采用Kaplan-Meier生存曲线和Cox回归分析LRRC15、SUN2表达与EOC患者预后的关系。结果观察组LRRC15阳性率高于对照组,SUN2阳性率低于对照组,差异有统计学意义(P均<0.05)。观察组中LRRC15与SUN2表达呈负相关(r=-0.634,P<0.05)。LRRC15在EOC患者FIGO分期Ⅲ期、淋巴结转移中的阳性率高于FIGO分期Ⅰ~Ⅱ期、无淋巴结转移癌组织,SUN2在EOC患者FIGO分期Ⅲ期、淋巴结转移中的阳性率低于FIGO分期Ⅰ~Ⅱ期、无淋巴结转移癌组织,差异有统计学意义(P均<0.05)。LRRC15阳性组EOC患者3年总生存率低于LRRC15阴性组,SUN2阴性组EOC患者3年总生存率低于SUN2阳性组,差异均有统计学意义(P均<0.05)。FIGO分期Ⅲ期、病理分级Ⅲ级、淋巴结转移、LRRC15阳性是影响EOC患者预后的危险因素,SUN2阳性是保护因素(P均<0.05)。结论EOC患者癌组织中LRRC15表达升高、SUN2表达降低,LRRC15、SUN2表达与EOC肿瘤进展有关,检测二者水平有助于评估EOC患者预后。

SunGas拟扩大美国绿色甲醇产能

近日,美国GTI Energy子公司SunGas可再生能源公司宣布与马士基集团控股子公司C2X建立战略合作关系,拟在美国开发绿色甲醇项目,旨在扩大美国绿色甲醇产能,增加可持续燃料供应,推动燃料行业脱碳。

Identification of Stability Domains for Flow Parameters in Fused Filament Fabrication Using Acoustic Emission

In Fused Filament Fabrication(FFF),the state of material flow significantly influences printing outcomes.However,online monitoring of these micro-physical processes within the extruder remains challenging.The flow state is affected by multiple parameters,with temperature and volumetric flow rate(VFR)being the most critical.The study explores the stable extrusion of flow with a highly sensitive acoustic emission(AE)sensor so that AE signals generated by the friction in the annular region can reflect the flow state more effectively.Nevertheless,the large volume and broad frequency range of the data present processing challenges.This study proposes a method that initially selects short impact signals and then uses the Fast Kurtogram(FK)to identify the frequency with the highest kurtosis for signal filtration.The results indicate that this approach significantly enhances processing speed and improves feature extraction capabilities.By correlating AE characteristics under various parameters with the quality of extruded raster beads,AE can monitor the real-time state of material flow.This study offers a concise and efficient method for monitoring the state of raster beads and demonstrates the potential of online monitoring of the flow states.

Dark Galaxies, Sun-Earth-Moon Interaction, Tunguska Event—Explained by WUM

Great experimental results and observations achieved by Astronomy in the last decades revealed new unexplainable phenomena. Astronomers have conclusive new evidence that a recently discovered “dark galaxy” is, in fact, an object the size of a galaxy, made entirely of dark matter. They found that the speed of the Earth’s rotation varies randomly each day. 115 years ago, the Tunguska Event was observed, and astronomers still do not have an explanation of It. Main results of the present article are: 1) Dark galaxies explained by the spinning of their Dark Matter Cores with the surface speed at equator less than the escape velocity. Their Rotational Fission is not happening. Extrasolar systems do not emerge;2) 21-cm Emission explained by the self-annihilation of Dark Matter particles XIONs (5.3 μeV);3) Sun-Earth-Moon Interaction explained by the influence of the Sun’s and the Moon’s magnetic field on the electrical currents of the charged Geomagma (the 660-km layer), and, as a result, the Earth’s daylength varies;4) Tunguska Event explained by a huge atmospheric explosion of the Superbolide, which was a stable Dark Matter Bubble before entering the Earth’s atmosphere.

The Decay Process of an α-configuration Sunspot

The decay of sunspot plays a key role in magnetic flux transportation in solar active regions(ARs).To better understand the physical mechanism of the entire decay process of a sunspot,an α-configuration sunspot in AR NOAA 12411 was studied.Based on the continuum intensity images and vector magnetic field data with stray light correction from Solar Dynamics Observatory/Helioseismic and Magnetic Imager,the area,vector magnetic field and magnetic flux in the umbra and penumbra are calculated with time,respectively.Our main results are as follows:(1) The decay curves of the sunspot area in its umbra,penumbra,and whole sunspot take the appearance of Gaussian profiles.The area decay rates of the umbra,penumbra and whole sunspot are-1.56 MSH day^(-1),-12.61 MSH day^(-1) and-14.04 MSH day^(-1),respectively;(2) With the decay of the sunspot,the total magnetic field strength and the vertical component of the penumbra increase,and the magnetic field of the penumbra becomes more vertical.Meanwhile,the total magnetic field strength and vertical magnetic field strength for the umbra decrease,and the inclination angle changes slightly with an average value of about 20°;(3) The magnetic flux decay curves of the sunspot in its umbra,penumbra,and whole sunspot exhibit quadratic patterns,their magnetic flux decay rates of the umbra,penumbra and whole sunspot are-9.84 × 10^(19)Mx day^(-1),-1.59 × 10^(20)Mx day^(-1) and -2.60 × 10^(20)Mx day^(-1),respectively.The observation suggests that the penumbra may be transformed into the umbra,resulting in the increase of the average vertical magnetic field strength and the reduction of the inclination angle in the penumbra during the decay of the sunspot.

Study on the Presence of Filament Yarn in Jamdani Saree in Bangladesh

Jamdani weaving is one of the oldest heredities of Bangladesh. From the beginning 100% cotton yarn was used to produce high quality jamdani saree. The weavers were the finest with weaving skills. Higher yarn count yarns were used to weave the jamdani saree. In course of time at present manmade fibres are also used to produce jamdani saree. The use of filament yarn may have eased the manufacturing difficulties, but the jamdani saree is missing its originality without 100% cotton. In this project, random jamdani saree sample was collected to identify the fibre composition. Samples of filament were also collected from the manufacturer and tested. It was evident that instead of cotton yarn in warp and weft silk and polyester filament yarn were used.

Development and Evaluation of Recycled Polypropylene and Bean Pod Powder Composite Biomaterial for Fused Filament Fabrication

Approximately 450 million tons of plastic and agricultural waste are produced each year in the world. Only a small portion of this plastic waste is recycled, and a small portion of this agricultural waste is used as fuel or fertilizer, and the rest of this waste is left in the environment or is burned, resulting in environmental and air pollution. For proper disposal, plastic and agricultural waste can be used in the manufacture of composites as raw materials. In this study, we had evaluated the use of bean pod powder (BPp) was used as natural reinforcing filler in recycled polypropylene (rPP) based composites. BPp/rPP composite filaments were developed using the extrusion method and the samples were printed by Fused Filament Fabrication (FFF). Composites with rPP matrix containing different weight fractions of BPp (5%, 10% and 15%) were fabricated to observe and compare the mechanical properties (tensile, flexural, and compressive strength) of the filament composites. In addition, the filament surface was analyzed for roughness and particle size of bean pod powder. The results established that BPp/rPP composites exhibited better tensile, flexural, and compressive strength than rPP and pure PP. By adding 5 wt% BPp, the tensile strength of rPP increased from 20.4 MPa to 22.8 MPa. The highest flexural strength (15.05 MPa) was obtained at 5 wt% BPp among all composites and the highest compressive strength (24.5 MPa), was obtained at 10 wt% BPp. Therefore, it can be concluded that by carefully selecting the ratio of BPp to bean pod powder, it is therefore possible to positively influence the mechanical properties of the resulting composite.

The Sun’s Rotation Appears Differential plus Other New Views

This is a fresh perspective on the sun that considers its huge spherical size in relation to the finite speed of light. The sun is so extended that it takes light approximately 2.32 seconds to travel from the plane of the solar limb to the plane tangential to the sun at the solar disc’s center. The aforementioned information is utilized in this study to support the new viewpoints. Firstly, it is shown that the solar disc is a simultaneous view of successively emitted coaxial spherical circles. Secondly, despite the fact that the sun is gaseous, it is thought to revolve completely as a rigid body at a fixed angular speed, yet an observer on Earth sees it rotate differentially. In a simple mathematical approach, it is found that the sun’s rotational speed apparently decreases with latitude. Thirdly, a qualitative examination of how we observe simultaneous whole-surface brightness changes of the sun and sunlike stars indicates that such changes would appear to spread out radially from the center of the solar disc.

Rapid Preparation of Filamentous Fungal DNA for PCR Analysis by Ultrasonic Treatment

A simple method to prepare of DNA template suitable for PCR amplification from filamentous fungi will be valuable for improving experimental efficiency.Here,a method was developed which just needed ultrasonic treatment of the mycelium at usual condition,and the produced solution could directly be used as DNA template for internal transcribed spacer(ITS)amplification successfully.The PCR could be improved by additional treatment of 60℃water baths,but was not centrifugation.When the template amount was 0.5-2μL and the ultrasonic time was 7-11 min,there was no distinctly influences on PCR.The method was commonly used for M.purpureus,I.cicadae,Lentinula sp.,Flammul sp.and Dictyophora sp.etc.to detect target sequences of ITS,hygromycin resistance gene(Hyg),CRISPR-associated protein 9(Cas9),Citrinin gene C(CtnC),Citrinin gene D(CtnD),large subunit rRNA gene(NL),and so on.The method could provide a simple,rapid,safe and economic approach to prepare the DNA template for large-scale PCR of the special filamentous fungi materials.