Microstructure investigation of a new type super high strength aluminum alloy at different heat-treated conditions

As a structural material with low density and high strength, super-highstrength aluminum alloys have a future for wide application. However, its poor stress corrosionresistance (SCC) restricts further development. In present, retrogression and re-ageing (RRA)treatment, which can improve both strength and SCCR of 7XXX series alloy, is a best method to solvethis problem. The effect of RRA treatment on the microstructure evolution of a new type lowfrequency electric-magnetic casting Al-9.OZn-2.45Mg-2.2Cu-0.15Zr alloy was investigated using DSCand TEM technologies. The results show that the typical microstructure of the alloy at T6 conditionis characterized by both fine eta' and GP zone homogeneously distributed in the matrix andcontinuous r) particles occurred on the grain-boundary. After RRA treatment, the matrixprecipitations are mainly fine and dispersed eta' and eta phases, being coarser and more stable thanthat from T6 temper. While, the grain-boundary microstructure is very close to that resulting fromT73 temper. High retrogression temperature and long retrogression time leads to a more stablemicrostructure after re-ageing.

Photosynthetic Characteristics of a Super High Yield Cultivar of Winter Wheat During Late Growth Period

The mechanism of high yield of winter wheat in the field at late growth period was investigated by measuring the photosynthetic characteristics of photosystem Ⅱ （PSⅡ） and xanthophylls cycle, which could provide physiological reference for breeding. Weimai 8 （W8）, a super high yield cultivar, and Lumai 14 （L14）, a control cultivar were object. The photosynthetic rate （Pn）, parameters of chlorophyll fluorescence and chlorophyll content were measured. The Pn, maximum photochemical efficiency of PSII （Fv/Fm）, quantum yield of PSII electron transport （ΦPSⅡ）, efficiency of excitation energy capture by open PSII reaction centers （Fv＇/Fm＇）, and photochemical quenching coefficient （qP） were higher in Weimai 8 compared to that in Lumai 14, a commercial high yield cultivar. Furthermore, Weirnai 8 showed a lower non- photochemical quenching coefficient and a lower de-epoxidized ratio of the xanthophyll cycle pigments than of Lumai 14 at late growth period. At mature stage, chlorophyll content of different leaves decreased both in Weimai 8 and Lumai 14. Chlorophyll content in flag, second and third leaf from the top of plant decreased more in Lumai 14 than in Weimai 8. These results suggested that Weimai 8 had more antenna pigments to absorb light energy, and had higher photosynthetic capability and photochemical efficiency of PSⅡ. The yield of Weimai 8 was also higher than that of Lumai 14.

Plant Ideotype at Heading for Super High-Yielding Rice in Double-Cropping System in South China

The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seasons. The morphological characters of each population were investigated at the heading stage, and the data were analyzed by using ANOVY and other statistic methods. The plant ideal morphological characters at the heading stage were established as follows： 1 ） for the early-season cropping, 90-105 cm plant height; 11-12 tillers per plant; 35-40 em length and 2.1-2.2 cm width of flag leaf; 46-50 cm length and 1.8-2.1 cm width of the second leaf from the top （L2）; 59-64 cm length and 1.4-1.9 cm width of the third leaf from the top （L3）; 7°-14°, 18° and 200-33° for the ideal leaf angles of the flag leaf, L2 and L3, respectively; 2） for the late-season cropping, 90-100 cm plant height; 9-15 tillers per plant; 30-41 cm length and 1.8-2.0 cm width of flag leaf; 53-61 cm length and 1.3-1.8 cm width of L2; 52-58 cm length and 1.2-1.5 cm width of L3; 9°-19°, 15°-37° and 16°-49° for the ideal leaf angles of the flag leaf, L2 and L3, respectively. The main physiological characteristics of these varieties were also analyzed.

Effects of high modes on the wind-induced response of super high-rise buildings

For super high-rise buildings, the vibration period of the basic mode is several seconds, and it is very close to the period of the fluctuating wind. The damping of super high-rise buildings is low, so super high-rise buildings are very sensitive to fluctuating wind. The wind load is one of the key loads in the design of super high-rise buildings. It is known that only the basic mode is needed in the wind-response analysis of tall buildings. However, for super high-rise buildings, especially for the acceleration response, because of the frequency amplification of the high modes, the high modes and the mode coupling may need to be considered. Three typical super high-rise projects with the SMPSS in wind tunnel tests and the random vibration theory method were used to analyze the effect of high modes on the wind-induced response. The conclusions can be drawn as follows. First, for the displacement response, the basic mode is dominant, and the high modes can be neglected. Second, for the acceleration response, the high modes and the mode coupling should be considered. Lastly, the strain energy of modes can only give the vibration energy distribution of the high-rise building, and it cannot describe the local wind-induced vibration of high-rise buildings, especially for the top acceleration response.

Feasibility Study on Chemical Flooding in Super High Porosity and Permeability Heavy Oil Reservoir

In this paper, the feasibility study of chemical flooding is carried out for ultra-high porosity and high permeability heavy oil field with permeability higher than 10 μm2 and porosity greater than 35%. The viscosity-concentration relationship of four kinds of oil flooding systems such as hydrolyzed polyacrylamide, structural polymer A, structural polymer B and gel was studied. The results showed that the viscosity of ordinary polymer and structural polymer B was lower compared with other two types of oil displacement agents, and the viscosity of structural polymer A was higher. The higher the concentration, the higher the viscosity retention rate. The gel system has the highest viscosity and best anti-shear ability. The resistance coefficient and residual resistance coefficient of structural polymer A and gel system were further studied. The results show that permeability, velocity and polymer concentration all affect the resistance coefficient and residual resistance coefficient. From the point of view of resistance establishment ability, it is considered that structural polymer A is not suitable for permeability formation above 10 μm2. Gel system has stronger ability to establish resistance coefficient than structural polymer A flooding system, and it is more feasible for formation system with permeability above 10 μm2.

Study on Plant Morphological Traits and Production Characteristics of Super High-Yielding Soybean

Super high-yielding soybean cultivar Liaodou 14, soybean cultivars from Ohio in the United States, and the common soybean cultivars from Liaoning Province, China, with similar geographic latitudes and identical pod-bearing habits were used as the study materials for a comparison of morphological traits and production characteristics to provide a theoretical basis for the breeding of improved super high-yielding soybean cultivars. Using a randomized block design, different soybean cultivars from the same latitude were compared under conventional and unconventional treatments for their production characteristics, including morphological traits, leaf area index （LAI）, net photosynthesis rate, and dry matter accumulation. The specific characteristics of the super high-yielding soybean cultivar Liaodou 14 were analyzed. The results showed that the plant height of Liaodou 14 was significantly lower than that of the common cultivars from Liaoning, whereas the number of its main-stem nodes was higher than that of the cultivars from Ohio or Liaoning. A high pod density was observed in Liaodou 14 under conventional treatments. Under both conventional and unconventional treatments, the branch number of Liaodou 14 was markedly higher than that of the common cultivars from Liaoning, and its branch length and leaf inclination angle were significantly higher than those of common cultivars from Liaoning or Ohio. Only small changes in the leaf inclination angle were observed in Liaodou 14 treated with conventional or unconventional methods. Under each treatment, Liaodou 14 exhibited the lowest amplitude of reduction in SPAD values and net photosynthesis rates from the grain-filling to ripening stages; the cultivars from Ohio and the common cultivars from Liaoning exhibited more significant reductions. Liaodou 14 reached its peak LAI later than the other cultivars but maintained its LAI at a higher level for a longer duration. Under both conventional and unconventional treatments, Liaodou 14 produced a higher yield than the other two cultivars, with significant differences from the Ohio cultivars. In summary, super high-yielding soybean cultivars have several main features： suitable plant height, high pod density, good leaf structure with strong functionality, and slow leaf senescence at the late reproductive stage, which is conducive to the accumulation of dry matter and improved yield.

Changes in Some Physiological Characteristics After Full Heading Stage in Flag Leaves of Super High-Yielding Inbred Rice

In a field experiment, rice cultivar Shanyou 63 was used as a check cultivar to investigate the changes in activity of peroxidase and contents of malondialdehyde and soluble protein after full heading stage in flag leaves of two super high-yielding inbred rice, including Shengtai 1 and Yuxiangyouzhan. The results showed that the peroxidase activities and soluble protein contents in the leaves of the three cultivars tended to increase gradually to peak values and thereafter descended during stage after full heading. Moreover, both the peroxidase activities and soluble protein contents of Shengtai 1 and Yuxiangyouzhan peaked at 8 days after full heading, which was compared with that of Shanyou 63 at 4 days later. Meanwhile, the malondialdehyde contents in the leaves of the three cultivars increased gradually after full heading stage. In addition, activities of peroxidase and contents of malondialdehyde and soluble protein in different cultivars were various at the same time. In general, for Shengtai 1 and Yuxiangyouzhan, the peroxidase activities and soluble protein contents were higher than those of Shanyou 63, whereas the malondialdehyde contents were lower compared with that of Shanyou 63. And these features could make the senescence of leaf become later and slower and photosynthetic product was more in Shengtai 1 and Yuxiangyouzhan than that in Shanyou 63.

Matter Composition and Two Stage Evolution of a Liangshan Super High-Sulfur Coal Seam in Kaili,Eastern Guizhou

Super-high sulfur coal resultes in serious coal-derived pollution but might have a particular genesis. Thus,a columnar section of an Early Permian Liangshan Formation coal seam. weight average sulfur content 5.80%,from Kaili,eastern Guizhou,was studied using the methods of coal petrology and geochemistry. The results show that the seam was apparently formed in seawater-effected peat bogs that developed in two distinct stages. During the first stage various layers were formed in a supratidal bog and have a composition characteristic of a bog with a gradually decreasing sea-water effect,decreasing water dynamics,and an increasingly reductive environment. Layers in the upper seam formed during a second stage in an intertidal bog. These layers are very high in total and inorganic sulfur,the ratios of or-ganic/inorganic sulfur and V/I drop,they are high in coal ash yield and have a high ash component index,considerable barkinite,oxidized and detrital macerals,have a porphyroclatic micro-structure and are rich in pyrite,all of which indi-cate the coal-forming environment had higher oxidation potential,strong and roiling water dynamics,and intermittent exposure to a sulfur rich environment.

Dynamic response characteristics of super high-rise buildings subjected to long-period ground motions

Spectrum characteristics of different types of seismic waves and dynamic response characteristics of super high-rise building structures under long-period ground motions were comparatively analyzed. First, the ground response wave (named LS-R wave) of a soft soil site with deep deposit, taking long-period bedrock seismic record as input, was calculated by wave propagation method. After that, a TOMAKOMAI station long-period seismic record from the Tokachi-Oki earthquake and conventional El-Centro wave were also chosen. Spectrum characteristics of these waves were analyzed and compared. Then, a series of shaking table tests were performed on a 1:50 scale super high-rise structural model under these seismic waves. Furthermore, numerical simulation of the prototype structure under these excitations was conducted, and structure damages under different intensive ground motions were discussed. The results show that: 1) Spectrum characteristics of ground response wave are significantly influenced by soft soil site with deep deposit, and the predominant period has an increasing trend. 2) The maximum acceleration amplification factor of the structure under the TOM wave is two times that under the El-Centro wave; while the maximum displacement response of the structure under the TOM wave is 4.4 times that under the El-Centro wave. Long-period ground motions show greater influences on displacement responses than acceleration responses for super high-rise building structures. 3) Most inelastic damage occurs at the upper 1/3 part of the super high-rise building when subjected to long-period ground motions.

Crucial technologies in the design of Xiluodu Super High Arch Dam

Some super high arch dams (SHADs),like Xiluodu Arch Dam,after their heights reaching the magnitude of 300 m,confront lots of technical challenges in design and construction.Several crucial technologies of 6 SHADs will be reviewed and discussed in this and consecutive papers,including Xiluodu,Jinping I in China,Baktiary in Iran,etc.,on the topics of the research method,criterion for evaluation and engineering application of dam safety analysis and evaluation,reasonable dam base interface,dam shape optimization,comprehensive treatments of complex foundation,anti-seismic engineering,dam construction material,concrete placement and temperature control,instrumentation and monitoring of dam operation,etc.This paper will mainly focus on the overall safety of SHADs,reasonable dam base interface analysis and evaluation and their engineering application.

Zero-voltage switching converter absorbing parasitic parameters for super high frequency induction heating

This paper presents a novel mega-Hz-level super high frequency zero-voltage soft-switching converter for induction heating power supplies. The prominent advantage of this topology is that it can absorb both inductive and capacitive parasitic components in the converter. The switch devices operate in a zero-voltage soft-switching mode. Consequently, the high voltage and high current spikes caused by parasitic inductors or capacitors oscillation do not occur in this circuit, and the high power loss caused by high frequency switching can be greatly reduced. A large value inductor is adopted between the input capacitor and the switches, thus, this novel converter shares the benefits of both voltage-type and current-type circuits simultaneously, and there are no needs of dead time between two switches. The working principles in different modes are introduced. Results of simulation and experiments operated at around 1 MHz frequency verify the validity of parasitic components absorption and show that this converter is competent for super high frequency applications.

Discussion on Super High-temperature Weather and City Construction

With the method of structure analysis, this work analyzes the real data of the high-temperature weather of China in 2003 and those in history, and finds out that the structure character of the high-temperature weather process corresponds to the distribution of urban buildings. The result shows that excessive dense buildings could influence the atmosphere structure, which leads to the urban temperature increasing sharply. On the other hand, the structure analysis also reveals some problems on urban construction, and the corresponding countermeasure is an efficient method for high-temperature weather forecast.

Two-Dimensional Super High Density Multi-Fiber Connector

We have developed 32-fiber and 60-fiber super high density multi fiber connector. This 32-fiber connector can be applicable for single-mode fiber and 60-fiber connector for multi-mode fiber. We have also established PC (physical contact) connection technology by optimizing polishing condition and clamping force.

Five‑year outcomes of EVO implantable collamer lens implantation for the correction of high myopia and super high myopia

Background:To evaluate the long-term safety,efficacy,predictability,and stability of implantable collamer lens with a central hole(EVO ICL)implantation for correcting high myopia(HM)and super high myopia(SHM).Methods:This prospective study evaluated 83 eyes of 46 patients who were divided into groups based on their spherical equivalent refractive error(SE):HM group(−12 D≤SE<−6 D)and SHM group(SE<−12 D).They were followed up for 5 years after ICL implantation;assessments of uncorrected distance visual acuity(UDVA),corrected distance visual acuity(CDVA),manifest refractive error,axial length,intraocular pressure,corneal endothelial cell density,and vault were conducted,and a questionnaire was administered.ResuIts:At 5 years postoperatively,the safety indices of the HM and SHM groups were 1.03±0.10 and 1.32±0.39,and the efficacy indices were 0.83±0.25 and 0.86±0.32,respectively.In the HM group,60.47%and 79.07%of the eyes were within±0.50 D and±1.00 D of the attempted correction,while it was achieved for 22.50%and 47.50%of the eyes in the SHM group,respectively.The SE of the HM group decreased from−9.72±1.41 D preoperatively to 0.04±0.39 D 1 month postoperatively and−0.67±0.57 D 5 years postoperatively,while in the SHM group,it decreased from−15.78±3.06 D preoperatively to−0.69±0.97 D 1 month postoperatively and−1.74±1.19 D 5 years postoperatively.Conclusion:EVO ICL implantation is safe,effective,and predictable for correcting HM and SHM.CDVA improved more after surgery for SHM,but the growth of axial length still needs attention.

Proteomic Analysis of the Response of Liangyoupeijiu(Super High-Yield Hybrid Rice) Seedlings to Cold Stress

Liangyoupeijiu is a super high-yield hybrid rice. Despite its advantages with respect to yield and grain quality, it is sensitive to cold, which keeps it from being widely cultivated. We subjected Liangyoupeijiu seedlings to 4 ℃ cold treatment, then extracted the leaf proteins. After 2-D gel electrophoresis separation and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis, a series of differentially displayed proteins were identified. Some metabolism-associated proteins were found among the downregulated proteins, such as carbamoyl phosphate synthetase, transketolase 1, dihydrolipoamide dehydrogenase and glyceraldehyde 3-phosphate dehydrogenase. The upregulated proteins included both stress-resistance proteins such as nucleoside diphosphate kinase I and proteins that are negative for rice growth, such as FtsH-like protein, plastid fusion and/or translocation factor （Pftf） and actin. Our results indicate that cold may inhibit Liangyoupeijiu growth through decreasing metabolic activity and damaging cell structure.

A scheme of optical interconnection for super high speed parallel computer

An optical cross connection network which adopts coarse wavelength division multiplexing (CWDM) and data packet is introduced. It can be used to realize communication between multi-CPU and multi-MEM in parallel computing system. It provides an effective way to upgrade the capability of parallel computer by combining optical wavelength division multiplexing (WDM) and data packet switching technology. CWDM used in network construction, optical cross connection (OXC) based on optical switch arrays, and data packet format used in network construction were analyzed. We have also done the optimizing analysis of the number of optical switches needed in different scales of network in this paper. The architecture of the optical interconnection for 8 wavelength channels and 128 bits parallel transmission has been researched. Finally, a parallel transmission system with 4 nodes, 8 channels per node, has been designed.

DISCUSSION ON MECHANISM OF CAVITATION DAMAGE ON SUPER HIGH DAMS

In this short paper the following viewpoints are discussed: it is possible in super high dams that the discharge flow, either in discharge tunnel or in open channel, may be an air water mixtures (two phase flow) in which the sound speed could reduce sharply depending on concentration of air, and the shock wave could be caused somewhere in super high flow while the flow velocity reaches or exceeds the sound speed in it. Besides bubble collapse, the correlation between shock wave and cavitation bubble collapse should be considered as the main mechanism of serious damage on discharge structures of super high dams.

Research on Superelevation Design in Highway Route Design

Superelevation design can basically be regarded as an important part of highway route design system.In the specific design process,designers need to strictly comply with the requirements of superelevation design specifications to ensure the driving stability of curved road section.However,due to the differences of road operation conditions in different regions of China,there are many uncertain factors in the design of super elevation,resulting in design errors.In order to reduce design errors as much as possible,this paper mainly based on the highway route design,highway route design problems and key measures are summarized for reference.

Collapse simulation of a super high-rise building subjected to extremely strong earthquakes

In recent years, super high-rise buildings (>500 m) are developing very quickly and become an important frontier of civil engineering. The collapse resistance of super high-rise buildings subjected to extremely strong earthquake is a critical problem that must be intensively studied. This paper builds up a nonlinear finite element model of the tallest building in China, Shang- hai Tower (632 m), and proposes the modeling method and failure criteria for different structural elements. The dynamic char- acters of this building are then analyzed, and the possible failure modes and collapse processes due to earthquakes are pre- dicted, as well as the corresponding collapse mechanism. This work will be helpful in collapse prevention and the seismic design of super high-rise buildings.

An improved ground motion intensity measure for super high-rise buildings

Ground motion intensity measure (IM) is an important part in performance-based seismic design. A reasonable and efficient IM can make the prediction of the structural seismic responses more accurate. Therefore, a more reasonable IM for super high-rise buildings is proposed in this paper. This IM takes into account the significant characteristic that higher-order vibration modes play important roles in the seismic response of super high-rise buildings, as well as the advantages of some existing IMs. The key parameter of the proposed IM is calibrated using a series of time-history analyses. The collapse simulations of two super high-rise buildings are used to discuss the suitability of the proposed IM and some other existing IMs. The results indicate that the proposed IM yields a smaller coefficient of variation for the critical collapse status than other existing IMs and performs well in reflecting the contribution of higher-order vibration modes to the structural response. Hence, the proposed IM is more applicable to seismic design for super high-rise buildings than other IMs.