Determination of polycyclic aromatic hydrocarbons with supercritical fluid extraction and chromatography（SFE／SFC）

Ｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｐｏｌｙｃｙｃｌｉｃａｒｏｍａｔｉｃｈｙｄｒｏｃａｒｂｏｎｓｗｉｔｈｓｕｐｅｒｃｒｉｔｉｃａｌｆｌｕｉｄｅｘｔｒａｃｔｉｏｎａｎｄｃｈｒｏｍａｔｏｇｒａｐｈｙ（ＳＦＥ／ＳＦＣ）ＹａｏＷｅｉｘｉ（ＲｅｓｅａｒｃｈＣｅｎｔｅ...

Hydrodynamics and Mass Transfer Performance in Supercritical Fluid Extraction Columns

New models for describing hydrodynamics and mass transfer performance in supercritical fluid extraction columns were proposed. Those models were proved by experimental data, which were obtained in supercritical fluid extraction packed column, spray column and sieve tray column respectively. The inner diameter of those columns areФ25 mm. These experimental systems include supercritical carbon diox-ide-isopropanol-water and supercritical carbon dioxide-ethanol-water, in which supercritical carbon dioxide was dispersed phase, and another was continuous phase. The extraction processes were operated with continuous countercurrent flow. The predicted values are agreed well with experimental data.

Influence of Modifiers on Supercritical Fluid Chromatography (SFC) and Supercritical Fluid Extraction (SFE), Part I

It is important to understand the mechanism and implications of different modifiers on analytical and preparative processes under chromatography with supercritical fluids (SFs) and under extraction with SFs. Supercritical fluid chromatography (SFC) and supercritical fluid extraction are generally carried out with neat supercritical carbon dioxide (SCCO2) or with SCCO2 containing modifiers (or cosolvents), especially for strongly polar compounds. For example, methanol is added as a cosolvent/modifier to SCCO2 for the extraction/separation of polar compounds. This paper discusses the influence of the modifier on the colligative properties of the principal mobile phase, which may define the situation in the total mobile phase in a chromatography column or in parts of a column under SFC. No colligative behavior of solutions reflects individual properties of the solutes. Their cross-interactions with solvents are discussed.

Supercritical Fluid Extraction of Essential Oil from Dry Rhizome of Ligusticum chuanxiong Hort and Their Characterization by GC/MS

Supercritical fluid extraction (SFE) of essential oil from dry rhizome ofLigusticum chuanxiong Hort was developed. GC/MS was used for the determination of the composition ofessential oil. Forty-four compounds were identified. The conventional extraction method wasconducted in parallel for comparison. The extracts were qualitatively compared by GC/MS. The yieldsof SFE and steam distillation-extraction were 4.16 % ( v/w) and 0.8 % ( v/w), respectively.Application of SFE of zessential oil from dry rhizome of Ligustiaan chuanxiong Hort was preferable.

Isolation and Extraction of Total Flavonoids from Epimedium Koreanum Nakai by Supercritical Fluid Extraction

In the present paper is reported the method for the isolation and extraction of total flavonoids of Epimedium Koreanum Nakai by means of supercritical fluid extraction(SFE). By examining pressure, temperature, amounts of modifier and extraction time, the optimized condition of SFE is confirmed as 30 MPa and 60 ℃, with 70% ethanol as the modifier. The samples were statically extracted for 30 min, followed by dynamic extraction for 120 min at a flow rate of 6 mL/min. The quantitative analysis of total flavonoids was performed by UV-Vis spectrophotometry. Compared with the conventional method, the SFE method is more efficient, more rapid and more friendly environmentally.

Supercritical Fluid Extraction of Total Flavonoids from Leaves of Acanthopanax Senticosus Harms

The herbal plant Acanthopanax Senticosus Harms is natural herb of Changbaishan in Jilin Province of China, which belongs to the Araliaceae family. As the ingredients of folk medicine, it has long been used to treat a variety of human diseases, such as cerebrovascular disease, diabetes, tumor, isochemic heart diseases, hypertension, rheumatic arthritis, etc. E2,33. Flavonoids, a class of constituent compounds, which have a broad distribution in the nature and are found in Acanthopanax Senticosus Harms, have gained particular attention. A number of studies have shown that flavonoid compounds have wide biological activities, such as anti-aging, anticancer, anti-HIV,

Comparison of volatile and semivolatile compounds from commercial cigarette by supercritical fluid extraction and simultaneous distillation extraction

Supercritical carbon dioxide fluid extraction (SFE) was studied as a rapid method for extraction of volatile and semivolatile compounds of Chinese commercial cigarettes. The method was compared with simultaneous distillation and extraction (SDE). Temperature and pressure for the SFE were optimized. The extracts obtained by the two methods showed different characters in composition and represented differently the flavor characteristics of tobacco; compared to SDE, SFE can extract compounds within a shorter time and avoid the thermal degradation and solvent contamination of samples. The extracts by the two extraction methods are complementary for investigating the flavor characteristic of tobacco products.

Supercritical Fluid Extraction of Saponins from Ginseng

Introduction Ginseng（ Panax ginseng C. A. Meyer, Araliaceae） is one of the most valuable Chinese crude drugs and has been used widely for over 2000 years. Studies have demonstrated that ginseng can act on the central nervous system, the cardiovascular system and the endocrine system; it can enhance immune function and metabolism; it possesses a biomodulation action, anticancer effect, anti-stress and anti-ageing activities, and so on.

Supercritical Fluid Extraction of a Novel Template from Mesoporous Zirconia and the Effect on Porous Structure

Mesoporous zirconia was synthesized by a new and simple method. Zirconium n-propoxide was used as the zirconium source. A small, inexpensive nonsurfactant, triethanolamine, was used as the template. The template was removed by thermal treatment in air and supercritical fluid extraction using CO2. The structure of the resulting materials was characterized by X-ray diffraction, transmission electron microscopy, and N2 adsorption-desorption analyses. The materials are found to have narrowly distributed average pore diameters and wormhole-like pore channels. However, higher surface area and larger pore volume are exhibited after supercritical fluid extraction with CO2. The removal of the template by thermal treatment also leads to condensation and mild shrinkage of the zirconia framework.

Fast analysis of derivatives of polycyclic aromatic hydrocarbons in soil by ultra-high performance supercritical fluid chromatography after supercritical fluid extraction enrichment

An efficient and environment-friendly method for simultaneous determination of 13 typical derivatives of polycyclic aromatic hydrocarbon(PAH)in petroleum-polluted soil with nitro-,oxy-and alkylfunctional group was developed using supercritical fluid extraction(SFE)followed by ultra-high performance supercritical fluid chromatography(UHPSFC).Parameters of UHPSFC,including type of stationary phase and mobile phase modifiers,gradient elution process,backpressure,column temperature,and the flow rate of mobile phase,were systematically optimized,achieving a fast separation within4.2 min.Limits of detection(LOD)were 0.005-0.1μg mL^(-1)or 0.1-2.0 ng g^(-1),respectively,with a good repeatability(RSD<5.0%).Before UHPSFC-PDA analysis,the PAH-derivatives in soil samples were effectively enriched in 15.0 min using SFE with an online carbon nanotubes(CNTs)collection trap.The soil samples were analyzed by the proposed method and the results were verified by GC-MS.Thus,SFE equipped with an online CNTs trap followed by UHPSFC-PDA analysis,which only consumed about2.0 mL organic solvent for a whole run,has been demonstrated to be an efficient way for screening and quantitative analysis of trace-level PAH-derivatives in soil samples.

Optimization of conditions for supercritical fluid extraction of flavonoids from hops (Humulus lupulus L.)

Waste hops are good sources of flavonoids. Extraction of flavonoids from waste hops (SC-CO2 extracted hops) using supercritical fluids technology was investigated. Various temperatures, pressures and concentrations of ethanol (modifier) and the ratio (w/w) of solvent to material were tested in this study. The results of single factor and orthogonal experiments showed that at 50 °C, 25 MPa, the ratio of solvent to material (50%), ethanol concentration (80%) resulted in maximum extraction yield fla- vonoids (7.8 mg/g). HPLC-MS analysis of the extracts indicated that flavonoids obtained were xanthohumol, the principal prenylflavonoid in hops.

Kinetics of Extraction of <i>β</i>-Carotene from Tray Dried Carrots by Using Supercritical Fluid Extraction Technique

β-carotene acts as an antioxidant and is receiving growing interest due to its ability as protecting agent against heart diseases, cancer and strengthening effect on red blood cells. The main aim of this work was to study the kinetics of the supercritical fluid extraction of β-carotene from tray dried carrots at 40℃, 50℃ and 55℃ and 30, 35 and 40 MPa at SC-CO2 flow rate of 2.0 L/min for extraction time of up to 6 h. It was observed that the concentration of β-carotene in the extract increased with pressure, temperature and extraction time. The results indicated that yield was found to be maximum at 45℃ and 35 MPa at 2 L/min SC-CO2 flow rate. Concentration of β-carotene in the extract increased with SC-CO2 flow rate. Weibull distribution model described adequately the kinetics of extraction of β-carotene from carrots.

Comparison of Constituents and Insecticidal Activities of Essential Oil from Artemisia lavandulaefolia by Steam Distillation and Supercritical-CO_2 Fluid Extraction

Essential oil was extracted from Artemisia lavandulaefolia DC.by steam distillation（SD） and supercritical-CO2 fluid extraction（SFE）,respectively.The constituents of the essentil oils extracted with those two methods were analyzed by gas chromatography-mass spectrometry（GC-MS） and insecticidal activities of the essential oils were evaluated,then the results were compared to assess their biological activity.Thirty-one compounds were identified in the essential oil extracted by SD,and its main components were eucalyptol,α,α,4-trimethyl-3-cyclohexene-1-methanol and so on.Twenty-two compounds were identified for the essential oil extracted by SFE,and its main components were cyclodecene,n-hexadecanoic acid and so on.Six chemical compositions were all contained in the essential oils extracted by the two methods,i.e.,eucalyptol,α,α,4-trimethyl-3-cyclohexene-1-methanol,caryophyllene,[3aS-（3aα,3bβ,4β,7α,7aS）]-octahydro-7-methyl-3-methylene-4-（1-methylethyl）-1H-cyclopenta[1,3]cyclopropa-[1,2]benzene,nerolidol and（-）-Spathulenol.The fumigation toxicity of the essential oil obtained by means of SD to the adults of Sitophilus zeamais is significantly higher than that of the essential oil by means of SFE.The contact toxicity of the essential oil obtained by means of SFE to the adults of S.zeamais is higher than that of the essential oil obtained by means of SD,but the difference is not significant.

EFFECTS OF ENTRAINERS ON THE PHASE EQUILIBRIUM OF SUPERCRITICAL FLUID EXTRACTION PROCESS

A flow apparatus was set up for measuring the solubility of a solid solute in a supercritical fluid withthe presence of a small amount of entrainer.The solubilities of biphenyl,diphenylamine and benzoic acid insupercritical carbon dioxide with one of the selected entrainers which were ethanol,acetone and n-hexanerespectively,were obtained in the pressure range of 10—32 MPa and the temperature range of 308—318K.Asolvolytic association theory has been proposed to explain the mechanism of entrainer effect,and theexperimental results were reasonably analysed.According to the solvolytic association theory,the association equa-tion of state was adopted to correlate the experimental data with good accuracy.

Study on a New Method of Extraction of Metal Ions from SolidMatrices by Supercritical Fluid

8-Hydroxyquinoline, methanol and Triton-100 were first used together in the extraction of metal ions by supercritical CO2. In the new system, the effects of pressure, temperature and the volume of CO2 on the efficiency of supercritical fluid extraction (SFE) were systematically investigated. The recovery under the optimum condition was only 11.38%, but if suitable concentration of methanol (v/v=5%) was added to the supercritical CO2, the recovery was increased significantly (83.60%, RSD=4.37%, n=5). In order to further enhance the recovery Triton X-100 was added to the samples, and the results were satisfactory (96.62%, RSD=2.85%, n=5).

Influence of Modifiers, Extractants, and Trappers on Lipid Composition with Liquids in Standard State Extraction, Supercritical Fluid Extraction and Trapping by Supercritical Fluid Extraction, Part II

Modifiers have a broad array of influences on extraction with liquids in standard state, supercritical fluid extraction (SFE), trapping by SFE and supercritical fluid chromatography (SFC). They can significantly change the qualitative and quantitative results. Quantitative and qualitative results can be influenced by different extractants and modifiers in different ways as it was shown by Brondz et al. at 2007 in “The real nature of the indole alkaloids in Cortinarius infractus: Evaluation of artifact formation through solvent extraction method development”, J. Chromatography A, 1148, 1-7. The choice of correct extractant, modifier, and trapper to the bulk mobile phase for supercritical fluids (SFs) or for liquids in subcritical or in the liquids in standard state is a challenge in any extraction procedure. This is the second paper in a sequence that describes the influence of extractants and modifiers on the performance of SFs and results of extraction with liquids in standard state and SFE. Here, attention is given to possible mistakes in qualitative and quantitative results by poor understanding of the influence of extractants, modifiers, and trappers on extraction and trapping process by a careless choice of extractant, modifier, and trapper for extraction with liquids in standard state and SFE. The SF chosen for discussion in the paper is CO2. However, similar effects can be observed with use of other SFs and fluids in subcritical and standard states. In this paper, the discussion of lipids, fatty and carboxylic acids have been chosen as target analytes for extraction, trapping and analysis. Some examples from extraction with liquids in the standard state and trapping in the supercritical state (collection) have been furnished with the wrong extractant, modifier, or trapper which is presented for illustration of inappropriate choice of extractants, modifiers, and trappers.

Optimization of Supercritical Fluid Extraction of Tea Flower Polysaccharides by Using Response Surface Method

Polysaccharide production from tea flower(TFPS) was carried out using supercritical fluid extraction(SFE).Response surface methodology(RSM),based on a five level,four variable small central composite design,was employed to obtain the best possible combination of extraction time,pressure,temperature and ethanol content of modifier for maximum production.The optimum conditions were as follows:extraction time of 170 min,pressure of45 MPa,temperature of 75 ℃,and 50% aqueous ethanol solution as modifier.Under these conditions,the experimental yield was 6.56 ± 0.37%,which was similar to the value predicted by the model.Monosaccharide composition of TFPS was fucose,rhamnose,arabinose,xylose,galactose,glucose,mannose,fructose,ribose,galacturonic acid and glucuronic acid in a molar percent of 31.69,0.21,0.49,1.29,35.82,0.97,1.63,18.34,7.88,1.06 and 0.63.Compared to other extraction methods,SFE could achieve higher yield and gain more types of monosaccharide.

Quality of Canola Oil Obtained by Conventional and Supercritical Fluid Extraction

Quality of canola oil obtained by the supercritical fluid extraction (SFE), using CO2 with ethanol as a co-solvent, was evaluated and compared to that of the conventionally-obtained oils using either n-hexane or chloroform methanol mixture. Physical characteristics, chemical properties, fatty acid composition and phenolic profile of oils were investigated. The SFE oil showed significantly lower melting point, peroxide value (PV) and higher free fatty acids (FFAs) and iodine value (IV) than the n-hexane-extracted one. There were no significant differences in the fatty acid composition of different oils. The SFE oil showed significantly higher phenolic content (35.91, 10.15, 3.16, 0.32 and47.48mg/g of sinapic acid, sinapine, sinapoyl glucose, canolol and total phenolics) as compared to 0.08, 0.70, 0.88, 0.45 and0.71mg/g, respectively in the n-hexane-extracted oil. These results indicate the superiority of SFE and advocate its use for the extraction of highly stable and functional canola oil for further health and nutraceutical uses. The present results have an industrial and technological relevance as SFE could be competitive with the traditional extraction techniques providing an environmental approach and enhancing the obtained oil quality and stability. After recovery of the initial installation costs, SFE could be more economic than conventional extraction. However, further economical studies are needed to validate this last conclusion.

Supercritical Fluid Carbon Dioxide in the Extraction of Lanolin and Its Alcohol

The use of supercritical fluid carbon dioxide (SFCO2) in extraction of lanolin and its alcohol is superior to the conventional solvent extraction method. Its distinctive advantages include high extractive ratio, nontoxic and nonflammable solvents, and minimal by -product pollution. The resulting refined lanolin and its alcohol have light color and little odor, and can be used as raw materials for high grade cosmetic products.

Separation of Molybdenum Isotopes at Supercritical Fluid Extraction with Carbon Dioxide in a Vertical Gradient Field of Temperatures

Separation of molybdenum isotope complexes by supercritical fluid extraction (SFE) with carbon dioxide was studied experimentally. The extraction of molybdenum isotope complexes was carried out in the updated extraction chamber (reactor) of the SFE-U installation, which provided an initial pressure of P ≤ 20 MPa at constant temperatures of the upper T1 = 35&deg;C and bottom T2 = 45&deg;C flanges. The device, through which the eluent was discharged, involved a set of four thin tubes of different lengths located inside the reactor. The axes of the tubes and the reactor are parallel and the tubes are equally spaced circumferentially inside the reactor. The extract was removed from each tube through channels isolated from each other and located in the bottom flange with cylindrical expansion, in which several layers of filter paper were placed. After passing through the filters the extract entered a restrictor designed to remove the eluent from the reactor. The initial pressure of carbon dioxide and the holding time of the extract were specified in the experiments. The level of the eluent sampling was set by the lengths of the tubes depending on the reactor height. A method of producing molybdenum complexes was described. It was experimentally shown that at an initial pressure of 20 MPa and a given holding time a difference from the natural content of Mo isotopes for given heights of extract sampling depending on the reactor height was observed in extracts removed through filters. The ranges of deviation of the content of molybdenum isotopes in extracts from natural one were determined.