The supercritical CO_(2)(sCO_(2))power cycle could improve efficiencies for a wide range of thermal power plants.The sCO_(2)turbine generator plays an important role in the sCO_(2)power cycle by directly converting th...The supercritical CO_(2)(sCO_(2))power cycle could improve efficiencies for a wide range of thermal power plants.The sCO_(2)turbine generator plays an important role in the sCO_(2)power cycle by directly converting thermal energy into mechanical work and electric power.The operation of the generator encounters challenges,including high temperature,high pressure,high rotational speed,and other engineering problems,such as leakage.Experimental studies of sCO_(2)turbines are insufficient because of the significant difficulties in turbine manufacturing and system construction.Unlike most experimental investigations that primarily focus on 100 kW‐or MW‐scale power generation systems,we consider,for the first time,a small‐scale power generator using sCO_(2).A partial admission axial turbine was designed and manufactured with a rated rotational speed of 40,000 rpm,and a CO_(2)transcritical power cycle test loop was constructed to validate the performance of our manufactured generator.A resistant gas was proposed in the constructed turbine expander to solve the leakage issue.Both dynamic and steady performances were investigated.The results indicated that a peak electric power of 11.55 kW was achieved at 29,369 rpm.The maximum total efficiency of the turbo‐generator was 58.98%,which was affected by both the turbine rotational speed and pressure ratio,according to the proposed performance map.展开更多
The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayto...The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.展开更多
Proppant transport within fractures is one of the most critical tasks in oil,gas and geothermal reservoir stimulation,as it largely determines the ultimate performance of the operating well.Proppant transport in rough...Proppant transport within fractures is one of the most critical tasks in oil,gas and geothermal reservoir stimulation,as it largely determines the ultimate performance of the operating well.Proppant transport in rough fracture networks is still a relatively new area of research and the associated transport mechanisms are still unclear.In this study,representative parameters of rough fracture surfaces formed by supercritical CO_(2) fracturing were used to generate a rough fracture network model based on a spectral synthesis method.Computational fluid dynamics(CFD)coupled with the discrete element method(DEM)was used to study proppant transport in this rough fracture network.To reveal the turning transport mechanism of proppants into branching fractures at the intersections of rough fracture networks,a comparison was made with the behavior within smooth fracture networks,and the effect of key pumping parameters on the proppant placement in a secondary fracture was analyzed.The results show that the transport behavior of proppant in rough fracture networks is very different from that of the one in the smooth fracture networks.The turning transport mechanisms of proppant into secondary fractures in rough fracture networks are gravity-driven sliding,high velocity fluid suspension,and fracture structure induction.Under the same injection conditions,supercritical CO_(2)with high flow Reynolds number still has a weaker ability to transport proppant into secondary fractures than water.Thickening of the supercritical CO_(2)needs to be increased beyond a certain value to have a significant effect on proppant carrying,and under the temperature and pressure conditions of this paper,it needs to be increased more than 20 times(about 0.94 m Pa s).Increasing the injection velocity and decreasing the proppant concentration facilitates the entry of proppant into the branching fractures,which in turn results in a larger stimulated reservoir volume.The results help to understand the proppant transport and placement process in rough fracture networks formed by reservoir stimulation,and provide a theoretical reference for the optimization of proppant pumping parameters in hydraulic fracturing.展开更多
Allelochemicals of Chinese-fir root was extracted by technology ofsupercritical CO_2 extraction under orthogonal experiment design, and it was used to analyzeallelopathic activity of Chinese-fir through bioassay of se...Allelochemicals of Chinese-fir root was extracted by technology ofsupercritical CO_2 extraction under orthogonal experiment design, and it was used to analyzeallelopathic activity of Chinese-fir through bioassay of seed germination. The results showed thatas to the available rate of allelochemicals, the pressure and temperature of extraction were themost important factors. The allelochemicals of Chinese-fir root extracted by pure CO_2 and ethanolmixed with CO_2 have different allelopathic activities to seed germination, and the allelochemicalsextracted by ethanol mixed with CO_2 had stronger inhibitory effects on seed germination than thatextracted by pure CO_2.展开更多
The feasibility of removal of the organochlorine pesticides residues of hexachlorocyclohexane(BHC) from radix ginseng with supercritical CO2 was explored. Some factors, such as extraction pressure, extraction temperat...The feasibility of removal of the organochlorine pesticides residues of hexachlorocyclohexane(BHC) from radix ginseng with supercritical CO2 was explored. Some factors, such as extraction pressure, extraction temperature, and kinds of co-solvents were investigated. The experimental results indicate that it is possible to reduce BHC residues in radix ginseng to the level of 0.1 × 10^-6 with supercritical CO2 in the presence of suitable amount of co-solvent, such as water.展开更多
Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were f...Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were formed by microporous PVDF-HFP membranes filled and swollen by a liquid electrolyte.The effect of the solvents on the morphology and structure,electrolyte absorptions and lithium ionic conductivity of the activated membranes were investigated.It was approved that all the membrane had the similar...展开更多
Polystyrene/Poly(ethylene terephthlate) (PET) blends have been prepared by theheterogeneous free-radical polymerization of styrene within supercritical carbon dioxide-swollenPET substrates. Composition of the blends ...Polystyrene/Poly(ethylene terephthlate) (PET) blends have been prepared by theheterogeneous free-radical polymerization of styrene within supercritical carbon dioxide-swollenPET substrates. Composition of the blends and the average molecular weight of polystyrene inthe blends can be controlled by equilibration time and reaction condition.展开更多
The keto-enol tautomerization of ethyl acetoacetate (EAA) in supercritical CO2-ethanol mixture has been investigated at 308.15 K and at different pressures using UV-Visspectroscopy. A method for calculating the local ...The keto-enol tautomerization of ethyl acetoacetate (EAA) in supercritical CO2-ethanol mixture has been investigated at 308.15 K and at different pressures using UV-Visspectroscopy. A method for calculating the local composition about EAA has been developed based on the relationship between the equilibrium constant and dielectric property of the mixing solvent. The results indicate that the local concentration of ethanol surrounding EAA is much higher than that in the bulk.展开更多
Introduction The use of supercritical fluids such as supercritical CO<sub>2</sub>（scCO<sub>2</sub>） has provided a ’clean’ and effective alternative to traditional methods of protein delive...Introduction The use of supercritical fluids such as supercritical CO<sub>2</sub>（scCO<sub>2</sub>） has provided a ’clean’ and effective alternative to traditional methods of protein delivery systems.Here。展开更多
To investigate the impacts of water/supercritical CO_(2)-rock interaction on the micro-mechanical properties of shale,a series of high-temperature and high-pressure immersion experiments were performed on the calcareo...To investigate the impacts of water/supercritical CO_(2)-rock interaction on the micro-mechanical properties of shale,a series of high-temperature and high-pressure immersion experiments were performed on the calcareous laminated shale samples mined from the lower submember of the third member of Paleogene Shahejie Formation in the Jiyang Depression,Bohai Bay Basin.After that,grid nanoindentation tests were conducted to analyze the influence of immersion time,pressure,and temperature on micro-mechanical parameters.Experimental results show that the damage of shale caused by the water/supercritical CO_(2)-rock interaction was mainly featured by the generation of induced fractures in the clay-rich laminae.In the case of soaking with supercritical CO_(2),the aperture of induced fracture was smaller.Due to the existence of induced fractures,the statistical averages of elastic modulus and hardness both decreased.Meanwhile,compaction and stress-induced tensile fractures could be observed around the laminae.Generally,the longer the soaking time,the higher the soaking pressure and temperature,the more significant the degradation of micro-mechanical parameters is.Compared with water-rock interaction,the supercritical CO_(2)-rock interaction caused a lower degree of mechanical damage on the shale surface.Thus,supercritical CO_(2)can be used as a fracturing fluid to prevent the surface softening of induced fractures in shale reservoirs.展开更多
基金National Science Fund for Excellent Young Scholars,Grant/Award Number:52022066。
文摘The supercritical CO_(2)(sCO_(2))power cycle could improve efficiencies for a wide range of thermal power plants.The sCO_(2)turbine generator plays an important role in the sCO_(2)power cycle by directly converting thermal energy into mechanical work and electric power.The operation of the generator encounters challenges,including high temperature,high pressure,high rotational speed,and other engineering problems,such as leakage.Experimental studies of sCO_(2)turbines are insufficient because of the significant difficulties in turbine manufacturing and system construction.Unlike most experimental investigations that primarily focus on 100 kW‐or MW‐scale power generation systems,we consider,for the first time,a small‐scale power generator using sCO_(2).A partial admission axial turbine was designed and manufactured with a rated rotational speed of 40,000 rpm,and a CO_(2)transcritical power cycle test loop was constructed to validate the performance of our manufactured generator.A resistant gas was proposed in the constructed turbine expander to solve the leakage issue.Both dynamic and steady performances were investigated.The results indicated that a peak electric power of 11.55 kW was achieved at 29,369 rpm.The maximum total efficiency of the turbo‐generator was 58.98%,which was affected by both the turbine rotational speed and pressure ratio,according to the proposed performance map.
基金This work was supported of National Natural Science Foundation of China Fund(No.52306033)State Key Laboratory of Engines Fund(No.SKLE-K2022-07)the Jiangxi Provincial Postgraduate Innovation Special Fund(No.YC2022-s513).
文摘The supercritical CO_(2) Brayton cycle is considered a promising energy conversion system for Generation IV reactors for its simple layout,compact structure,and high cycle efficiency.Mathematical models of four Brayton cycle layouts are developed in this study for different reactors to reduce the cost and increase the thermohydraulic performance of nuclear power generation to promote the commercialization of nuclear energy.Parametric analysis,multi-objective optimizations,and four decision-making methods are applied to obtain each Brayton scheme’s optimal thermohydraulic and economic indexes.Results show that for the same design thermal power scale of reactors,the higher the core’s exit temperature,the better the Brayton cycle’s thermo-economic performance.Among the four-cycle layouts,the recompression cycle(RC)has the best overall performance,followed by the simple recuperation cycle(SR)and the intercooling cycle(IC),and the worst is the reheating cycle(RH).However,RH has the lowest total cost of investment(C_(tot))of$1619.85 million,and IC has the lowest levelized cost of energy(LCOE)of 0.012$/(kWh).The nuclear Brayton cycle system’s overall performance has been improved due to optimization.The performance of the molten salt reactor combined with the intercooling cycle(MSR-IC)scheme has the greatest improvement,with the net output power(W_(net)),thermal efficiencyη_(t),and exergy efficiency(η_(e))improved by 8.58%,8.58%,and 11.21%,respectively.The performance of the lead-cooled fast reactor combined with the simple recuperation cycle scheme was optimized to increase C_(tot) by 27.78%.In comparison,the internal rate of return(IRR)increased by only 7.8%,which is not friendly to investors with limited funds.For the nuclear Brayton cycle,the molten salt reactor combined with the recompression cycle scheme should receive priority,and the gas-cooled fast reactor combined with the reheating cycle scheme should be considered carefully.
基金the support from the National Key Research and Development Program of China(Grant No.2022YFE0137200)the Natural Science Basic Research Program of Shaanxi Province,China(Program No.2024JC-YBQN-0381,2023JC-QN-0403)+2 种基金the Natural Science Basic Research Program of Shaanxi Province,China(Program No.2022JC-37)the Innovation Capability Support Program of Shaanxi(Program No.2023-CX-TD31)the Funded by Open Foundation of Shaanxi Key Laboratory of Carbon Dioxide Sequestration and Enhanced Oil Recovery,and the Youth Innovation Team of Shaanxi Universities。
文摘Proppant transport within fractures is one of the most critical tasks in oil,gas and geothermal reservoir stimulation,as it largely determines the ultimate performance of the operating well.Proppant transport in rough fracture networks is still a relatively new area of research and the associated transport mechanisms are still unclear.In this study,representative parameters of rough fracture surfaces formed by supercritical CO_(2) fracturing were used to generate a rough fracture network model based on a spectral synthesis method.Computational fluid dynamics(CFD)coupled with the discrete element method(DEM)was used to study proppant transport in this rough fracture network.To reveal the turning transport mechanism of proppants into branching fractures at the intersections of rough fracture networks,a comparison was made with the behavior within smooth fracture networks,and the effect of key pumping parameters on the proppant placement in a secondary fracture was analyzed.The results show that the transport behavior of proppant in rough fracture networks is very different from that of the one in the smooth fracture networks.The turning transport mechanisms of proppant into secondary fractures in rough fracture networks are gravity-driven sliding,high velocity fluid suspension,and fracture structure induction.Under the same injection conditions,supercritical CO_(2)with high flow Reynolds number still has a weaker ability to transport proppant into secondary fractures than water.Thickening of the supercritical CO_(2)needs to be increased beyond a certain value to have a significant effect on proppant carrying,and under the temperature and pressure conditions of this paper,it needs to be increased more than 20 times(about 0.94 m Pa s).Increasing the injection velocity and decreasing the proppant concentration facilitates the entry of proppant into the branching fractures,which in turn results in a larger stimulated reservoir volume.The results help to understand the proppant transport and placement process in rough fracture networks formed by reservoir stimulation,and provide a theoretical reference for the optimization of proppant pumping parameters in hydraulic fracturing.
基金This paper was supported by Natural Science Foundation of Fujian Province (B0010020)
文摘Allelochemicals of Chinese-fir root was extracted by technology ofsupercritical CO_2 extraction under orthogonal experiment design, and it was used to analyzeallelopathic activity of Chinese-fir through bioassay of seed germination. The results showed thatas to the available rate of allelochemicals, the pressure and temperature of extraction were themost important factors. The allelochemicals of Chinese-fir root extracted by pure CO_2 and ethanolmixed with CO_2 have different allelopathic activities to seed germination, and the allelochemicalsextracted by ethanol mixed with CO_2 had stronger inhibitory effects on seed germination than thatextracted by pure CO_2.
文摘The feasibility of removal of the organochlorine pesticides residues of hexachlorocyclohexane(BHC) from radix ginseng with supercritical CO2 was explored. Some factors, such as extraction pressure, extraction temperature, and kinds of co-solvents were investigated. The experimental results indicate that it is possible to reduce BHC residues in radix ginseng to the level of 0.1 × 10^-6 with supercritical CO2 in the presence of suitable amount of co-solvent, such as water.
基金This work was financially supported by the China Postdoctoral Science Foundation(No.20060400436)the National Nature Foundation of China(No. 50433010)the National 973 Foundation of China(No.2003CB615705).
文摘Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were formed by microporous PVDF-HFP membranes filled and swollen by a liquid electrolyte.The effect of the solvents on the morphology and structure,electrolyte absorptions and lithium ionic conductivity of the activated membranes were investigated.It was approved that all the membrane had the similar...
文摘Polystyrene/Poly(ethylene terephthlate) (PET) blends have been prepared by theheterogeneous free-radical polymerization of styrene within supercritical carbon dioxide-swollenPET substrates. Composition of the blends and the average molecular weight of polystyrene inthe blends can be controlled by equilibration time and reaction condition.
文摘The keto-enol tautomerization of ethyl acetoacetate (EAA) in supercritical CO2-ethanol mixture has been investigated at 308.15 K and at different pressures using UV-Visspectroscopy. A method for calculating the local composition about EAA has been developed based on the relationship between the equilibrium constant and dielectric property of the mixing solvent. The results indicate that the local concentration of ethanol surrounding EAA is much higher than that in the bulk.
文摘Introduction The use of supercritical fluids such as supercritical CO<sub>2</sub>（scCO<sub>2</sub>） has provided a ’clean’ and effective alternative to traditional methods of protein delivery systems.Here。
基金Supported by the Project of the Academic Department of the Chinese Academy of Sciences (KKBE170026)Project of Science and Technology Department of Sinopec (P21039-3,P20049-1)Independent Research and Development Project of Sinopec Petroleum Exploration and Development Research Institute (YK-2021-29-2)。
文摘To investigate the impacts of water/supercritical CO_(2)-rock interaction on the micro-mechanical properties of shale,a series of high-temperature and high-pressure immersion experiments were performed on the calcareous laminated shale samples mined from the lower submember of the third member of Paleogene Shahejie Formation in the Jiyang Depression,Bohai Bay Basin.After that,grid nanoindentation tests were conducted to analyze the influence of immersion time,pressure,and temperature on micro-mechanical parameters.Experimental results show that the damage of shale caused by the water/supercritical CO_(2)-rock interaction was mainly featured by the generation of induced fractures in the clay-rich laminae.In the case of soaking with supercritical CO_(2),the aperture of induced fracture was smaller.Due to the existence of induced fractures,the statistical averages of elastic modulus and hardness both decreased.Meanwhile,compaction and stress-induced tensile fractures could be observed around the laminae.Generally,the longer the soaking time,the higher the soaking pressure and temperature,the more significant the degradation of micro-mechanical parameters is.Compared with water-rock interaction,the supercritical CO_(2)-rock interaction caused a lower degree of mechanical damage on the shale surface.Thus,supercritical CO_(2)can be used as a fracturing fluid to prevent the surface softening of induced fractures in shale reservoirs.
