Porous materials with selective wettability and permeability have significant importance in oil-water separation,but complex fabrication processes are typically required to obtain the desired structures with suitable ...Porous materials with selective wettability and permeability have significant importance in oil-water separation,but complex fabrication processes are typically required to obtain the desired structures with suitable surface chemistry.In this work,an industrial melt-blown strategy that utilized commercially available polypropylene(PP)was used for the large-scale fabrication of superhydrophobic/superoleophilic membranes with staggered fabric structures.These membranes could readily separate different oils including pump oil and crude oil from various aqueous solutions such as strongly acidic,alkaline,and saline media.In addition,the separation efficiencies of these membranes exceeded 99%,and they could remain functional even after exposure to corrosive media.We anticipate that this work will further the design of membranes and enhance their applicability in oil-water separation,and provide researchers and engineers with a more effective tool for performing challenging separations and mitigating pollution.展开更多
Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, ...Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, γ-cyclodextrin polymers (α-, β-, γ-CDPs) composites [RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs] by the sol-gel reaction of the corresponding oligomer in the presence of the α-, β-, γ-CDPs under alkaline conditions. The RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs composites thus obtained were found to give a good dispersibility toward the traditional organic media except for water, and were applied to the surface modification of glass to provide a sueperoleophilic/superhydrophobic characteristic on the modified surface, although the corresponding RF-(VM-SiO2)n-RF nanocomposites can give a usual oleophobic/superhydrophobic property on the surface. These composites powders were also found to be applicable to the packing material for the column chromatography to separate the mixture of oil/water and the water in oil (W/O) emulsions. More interestingly, these composite powders were found to have a higher adsorption ability toward not only low-molecular weight aromatic compounds such as bisphenol A and bisphenol AF but also volatile organic compounds, compared to that of the pristine α-, β-, γ-CDPs.展开更多
Fluoroalkyl end-capped vinyltrimethoxysilane oligomer</span> </div> <span style="font-family:""> <div style="text-align:justify;"> <span style="font-family:&quo...Fluoroalkyl end-capped vinyltrimethoxysilane oligomer</span> </div> <span style="font-family:""> <div style="text-align:justify;"> <span style="font-family:""><span style="font-family:Verdana;">[R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(CH</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">-CHSi(OMe)</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">: </span><i><span style="font-family:Verdana;">n</span></i><span style="font-family:Verdana;"> = 2, 3, R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;"> = CF(CF</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">)OC</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">F</span><sub><span style="font-family:Verdana;">7</span></sub><span style="font-family:Verdana;">: R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">]</span></span><span style="font-family:Verdana;">,</span><span style="font-family:""><span style="font-family:Verdana;"> was applied to the facile preparation of the corresponding oligomer/sand (Ottawa </span><span style="font-family:Verdana;">sand: OS) composites [R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">/OS] through the sol-gel reaction </span><span style="font-family:Verdana;">of the oligomer in the presence of micro-sized OS particles (590 </span></span><span style="font-family:Verdana;">-</span><span style="font-family:""><span style="font-family:Verdana;"> 840 μm) under alkaline conditions at room temperature. FE-SEM (Field Emission Scanning Electron Micrograph) images showed that the obtained composites consist of the R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;"> oligomeric nanoparticles and the micro-sized </span><span style="font-family:Verdana;">OS particles. Interestingly, the R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">/OS composites thus ob</span><span style="font-family:Verdana;">tained </span><span style="font-family:Verdana;">can provide the superoleophilic/superhydrophobic characteristic on the</span><span style="font-family:Verdana;"> composite surface, applying to the separation of not only the mixture of oil/water but also the W/O emulsion to isolate the transparent colorless oil. The fluorinated oligomeric OS composites were also found to be applicable to the selective removal of fluorinated aromatic compounds from </span></span><span style="font-family:Verdana;">an </span><span style="font-family:Verdana;">aqueous methanol solution. Especially, it was demonstrated that the fluorinated OS composites can supply a higher efficient and smooth separation ability for the separation of </span><span style="font-family:Verdana;">the </span><span style="font-family:""><span style="font-family:Verdana;">mixture of oil and water than that of the corresponding fluorinated micro-sized controlled silica gel (μ-SiO</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">) composites (average particle size: 9.5 μm), which were prepared under similar conditions. In addition to the separation of oil/water, the fluorinated OS composites provided higher and </span></span><span style="font-family:Verdana;">more </span><span style="font-family:""><span style="font-family:Verdana;">selective removal ability for the fluorinated aromatic compounds from aqueous solutions than that of the μ-SiO</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;"> composites.展开更多
The changes of the wettability of the solid surfaces have attracted massive attention due to their important practical implications in numerous fields. As a new subject, the research on the wettability under the diffe...The changes of the wettability of the solid surfaces have attracted massive attention due to their important practical implications in numerous fields. As a new subject, the research on the wettability under the different environments is still in its early stage. So the fundamental research must be performed for the practical applications under different environments. However, it is seldom that the comprehensive wettability of a surface in air, in water and in oil has been reported. In this paper, the authors investigated the wettability of the stainless steel mesh coated with polyurethane in the above three different environments. The surface of the uncoated mesh was found to be hydrophobic in air, but the surface of the coated mesh was superhydrophilic in air. More interestingly, the surfaces of the coated meshes were superoleophilic in water and superhydrophobic in oil. Due to the coated meshes with these wettabilities were fabricated via a facile two-step method, the presented method may be adopted for large-scale industrial production, in various fields, such as icing prevention or the oil-field industry.展开更多
The efficient and rapid separation of oil from stabilized oil-in-water emulsions with micro/nanometer size is a global challenge.Owing to the low oil content in oil-in-water emulsions,separating the oil by simply cont...The efficient and rapid separation of oil from stabilized oil-in-water emulsions with micro/nanometer size is a global challenge.Owing to the low oil content in oil-in-water emulsions,separating the oil by simply controlling the surface wettability is difficult.Controlling the pore size of the membrane surface to achieve separation will lead to a sharp decrease in flux.Herein,inspired by cell membrane transportation,a hydrophilic/hydrophobic bifunctional Janus membrane for stable oil-in-water separation was prepared by simple surface polymerization and vapor diffusion.The prepared Janus membrane contained a hydrophobic side and hydrophilic polyamine layer.When used for oil-in-water emulsion separation,the polyamine layer accumulated micro/nanometer oil droplets,forming an oil layer on the hydrophobic surface.Water was retained by the 1H,1H,2H,2H-perfluorooctyl trichlorosilane layer,allowing oil droplets to selectively permeate through the membrane,achieving the separation effect.As the pore size of the modified fabric was basically unchanged,the permeation flux was fast(1.53×10^(3) Lm^(−2) h^(−1)).Furthermore,the poly(N,N-dimethylaminoethyl methacrylate)layer destroyed the emulsion stability,making the emulsion droplets aggregate without affecting the separation efficiency with fast permeation flux.Therefore,the prepared bifunctional Janus membrane shows great potential for actual wastewater treatment.展开更多
Oily water treatment has attracted the attention of many researchers. The development of effective and cheap oil/water separation materials is urgent for treating this problem. Herein, inspired by superhydrophobic typ...Oily water treatment has attracted the attention of many researchers. The development of effective and cheap oil/water separation materials is urgent for treating this problem. Herein, inspired by superhydrophobic typical plant leaves such as lotus, red rose and marigold, superhydrophobic and superoleophilic copper mesh was fabricated by etching and then surface modi- fication with 1-dodecanethiol (HS(CH2)IlCH3). A rough silver layer is formed on the mesh surface after immersion. The ob- tained mesh surface exhibits superhydrophobicity and superoleophilicity and the static water contact angle was 153~ + 3~. In addition, the as-prepared copper mesh shows self-cleaning character with water and chemical stability. The as-prepared copper foam can easily remove the organic solvents either on water or underwater. We demonstrate that by using the as-prepared mesh, oils can be absorbed and separated, and that high separation efficiencies of larger than 92% are retained for various oils. Thus, such superhydrophobic and superoleophilic copper mesh is a very promising material for the application ofoil spill cleanup and industrial oily wastewater treatment.展开更多
Magnetically driven super-hydrophobic materials were prepared by Fe3O4 nanoparticles and stearic acid,which were deposited on the surface of polyurethane sponges.The presence of the Fe3O4 nanoparticles makes the spong...Magnetically driven super-hydrophobic materials were prepared by Fe3O4 nanoparticles and stearic acid,which were deposited on the surface of polyurethane sponges.The presence of the Fe3O4 nanoparticles makes the sponge have the magnetic,and the micro-nano hierarchical structure and hydrophobic functional groups lead to the sponge have excellent superhydrophobicity.The as-prepared sponge exhibited excellent absorption capacities for various oils and organic solvents ranging from 23.8 times to 86.7 times of its own weight.Moreover,the oil separation capacities still keep a high value after 50 cycles of squeezing the saturated absorbed as-prepared sponge.All of these satisfactory properties make the as-prepared sponge as a candidate of ideal absorbents for oily industrial wastewater and oil spills in oceans.展开更多
基金the National Natural Science Foundations of China(Nos.21878059,21878058,21808044)the Science and Technology Project of Guangdong Province(2017A050501040)the Science and Technology Project of the Guangzhou Education Bureau(201831830,201831825)for sponsoring this research。
文摘Porous materials with selective wettability and permeability have significant importance in oil-water separation,but complex fabrication processes are typically required to obtain the desired structures with suitable surface chemistry.In this work,an industrial melt-blown strategy that utilized commercially available polypropylene(PP)was used for the large-scale fabrication of superhydrophobic/superoleophilic membranes with staggered fabric structures.These membranes could readily separate different oils including pump oil and crude oil from various aqueous solutions such as strongly acidic,alkaline,and saline media.In addition,the separation efficiencies of these membranes exceeded 99%,and they could remain functional even after exposure to corrosive media.We anticipate that this work will further the design of membranes and enhance their applicability in oil-water separation,and provide researchers and engineers with a more effective tool for performing challenging separations and mitigating pollution.
文摘Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, γ-cyclodextrin polymers (α-, β-, γ-CDPs) composites [RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs] by the sol-gel reaction of the corresponding oligomer in the presence of the α-, β-, γ-CDPs under alkaline conditions. The RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs composites thus obtained were found to give a good dispersibility toward the traditional organic media except for water, and were applied to the surface modification of glass to provide a sueperoleophilic/superhydrophobic characteristic on the modified surface, although the corresponding RF-(VM-SiO2)n-RF nanocomposites can give a usual oleophobic/superhydrophobic property on the surface. These composites powders were also found to be applicable to the packing material for the column chromatography to separate the mixture of oil/water and the water in oil (W/O) emulsions. More interestingly, these composite powders were found to have a higher adsorption ability toward not only low-molecular weight aromatic compounds such as bisphenol A and bisphenol AF but also volatile organic compounds, compared to that of the pristine α-, β-, γ-CDPs.
文摘Fluoroalkyl end-capped vinyltrimethoxysilane-<i><span style="font-family:Verdana;">N</span></i><span><span style="font-family:Verdana;">,</span><i><span style="font-family:Verdana;">N</span></i></span><span style="font-family:Verdana;">-dimethylacrylamide cooli</span><span style="font-family:;" "=""><span style="font-family:Verdana;">gomer [R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(CH</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">-CHSi(OMe)</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">x</span></sub></i><span style="font-family:Verdana;">-(CH</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">-CHC(=O)NMe</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">y</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">;R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;"> = CF(CF</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">)OC</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">F</span><sub><span style="font-family:Verdana;">7</span></sub><span style="font-family:Verdana;">:</span></span><span style="font-family:;" "=""><span style="font-family:Verdana;"> R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM)</span><i><sub><span style="font-family:Verdana;">x</span></sub></i><span style="font-family:Verdana;">-(DMAA)</span><i><sub><span style="font-family:Verdana;">y</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">] was synthesized by reaction of fluoroalkanoyl peroxide [R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-C(=O)O-O(O=)C-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">] with vinyltrimethoxysilane (VM) and </span><i><span style="font-family:Verdana;">N</span></i><span><span style="font-family:Verdana;">,</span><i><span style="font-family:Verdana;">N</span></i></span><span style="font-family:Verdana;">-</span></span><span style="font-family:Verdana;">dimethylacrylamide (DMAA). The modified glass surface treated with the</span><span style="font-family:;" "=""><span style="font-family:Verdana;"> cooligomeric nanoparticles [R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">x</span></sub></i><span style="font-family:Verdana;">-(DMAA)</span><i><sub><span style="font-family:Verdana;">y</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">] prepared under the sol-gel reaction of the cooligomer under alkaline conditions was found to exhibit an oleophobic/superhydrophilic property, although the corresponding fluorinated homooligomeric nanoparticles [R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">] afforded an </span><span style="font-family:Verdana;">oleophobic/hydrophobic property on the modified surface under similar </span><span style="font-family:Verdana;">con</span><span><span style="font-family:Verdana;">ditions. R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">/R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">x</span></sub></i><span style="font-family:Verdana;">-(DMAA)</span><i><sub><span style="font-family:Verdana;">y</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">/</span><b><i><span style="font-family:Verdana;">PSt</span></i></b><span style="font-family:Verdana;"> (micro-sized</span></span> <span style="font-family:Verdana;">polystyrene particles) composites, which were prepared by the sol-gel reac</span><span style="font-family:Verdana;">tions of the corresponding homooligomer and cooligomer in the presence of </span><b><i><span style="font-family:Verdana;">PSt </span></i></b><span style="font-family:Verdana;">particle under alkaline conditions, provided an oleophobic/superhydrophilic </span><span style="font-family:Verdana;">property on the modified surface. However, it was demonstrated that the</span><span><span style="font-family:Verdana;"> surface wettability on the modified surface treated with the R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-</span></span><span><span style="font-family:Verdana;">SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-</span></span></span><span style="font-family:;" "=""><span style="font-family:Verdana;">R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">/R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">x</span></sub></i><span style="font-family:Verdana;">-(DMAA)</span><i><sub><span style="font-family:Verdana;">y</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">/</span><b><i><span style="font-family:Verdana;">PSt</span></i></b><span style="font-family:Verdana;"> composites changes dramatically from oleophobic/superhydrophilic to superoleophilic/superhydrophilic </span><span style="font-family:Verdana;">and superoleophilic/superhydrophobic characteristics, increasing with </span><span style="font-family:Verdana;">greater </span><span><span style="font-family:Verdana;">feed ratios (mg/mg) of the R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;"> homooligomer in homooligo</span></span><span style="font-family:Verdana;">mer/cooligo</span></span><span style="font-family:Verdana;">mer from 0 to 100 in the preparation of the composites. Such controlled surfac</span>
文摘Fluoroalkyl end-capped vinyltrimethoxysilane oligomer</span> </div> <span style="font-family:""> <div style="text-align:justify;"> <span style="font-family:""><span style="font-family:Verdana;">[R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(CH</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">-CHSi(OMe)</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">: </span><i><span style="font-family:Verdana;">n</span></i><span style="font-family:Verdana;"> = 2, 3, R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;"> = CF(CF</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">)OC</span><sub><span style="font-family:Verdana;">3</span></sub><span style="font-family:Verdana;">F</span><sub><span style="font-family:Verdana;">7</span></sub><span style="font-family:Verdana;">: R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">]</span></span><span style="font-family:Verdana;">,</span><span style="font-family:""><span style="font-family:Verdana;"> was applied to the facile preparation of the corresponding oligomer/sand (Ottawa </span><span style="font-family:Verdana;">sand: OS) composites [R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">/OS] through the sol-gel reaction </span><span style="font-family:Verdana;">of the oligomer in the presence of micro-sized OS particles (590 </span></span><span style="font-family:Verdana;">-</span><span style="font-family:""><span style="font-family:Verdana;"> 840 μm) under alkaline conditions at room temperature. FE-SEM (Field Emission Scanning Electron Micrograph) images showed that the obtained composites consist of the R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;"> oligomeric nanoparticles and the micro-sized </span><span style="font-family:Verdana;">OS particles. Interestingly, the R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">-(VM-SiO</span><sub><span style="font-family:Verdana;">3/2</span></sub><span style="font-family:Verdana;">)</span><i><sub><span style="font-family:Verdana;">n</span></sub></i><span style="font-family:Verdana;">-R</span><sub><span style="font-family:Verdana;">F</span></sub><span style="font-family:Verdana;">/OS composites thus ob</span><span style="font-family:Verdana;">tained </span><span style="font-family:Verdana;">can provide the superoleophilic/superhydrophobic characteristic on the</span><span style="font-family:Verdana;"> composite surface, applying to the separation of not only the mixture of oil/water but also the W/O emulsion to isolate the transparent colorless oil. The fluorinated oligomeric OS composites were also found to be applicable to the selective removal of fluorinated aromatic compounds from </span></span><span style="font-family:Verdana;">an </span><span style="font-family:Verdana;">aqueous methanol solution. Especially, it was demonstrated that the fluorinated OS composites can supply a higher efficient and smooth separation ability for the separation of </span><span style="font-family:Verdana;">the </span><span style="font-family:""><span style="font-family:Verdana;">mixture of oil and water than that of the corresponding fluorinated micro-sized controlled silica gel (μ-SiO</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;">) composites (average particle size: 9.5 μm), which were prepared under similar conditions. In addition to the separation of oil/water, the fluorinated OS composites provided higher and </span></span><span style="font-family:Verdana;">more </span><span style="font-family:""><span style="font-family:Verdana;">selective removal ability for the fluorinated aromatic compounds from aqueous solutions than that of the μ-SiO</span><sub><span style="font-family:Verdana;">2</span></sub><span style="font-family:Verdana;"> composites.
基金supported by the National Natural Science Foundation of China(Grant Nos.51475353,51375361&51475352)the Tribology Science Fund of the State Key Laboratory of Tribology(Grant No.SKLTKF14A02)+1 种基金the Natural Science Basic Research Program of Shaanxi Province(Grant No.2016JM5004)the Key Laboratory of the Shaanxi Provincial Department of Education(Grant No.16JS057)
文摘The changes of the wettability of the solid surfaces have attracted massive attention due to their important practical implications in numerous fields. As a new subject, the research on the wettability under the different environments is still in its early stage. So the fundamental research must be performed for the practical applications under different environments. However, it is seldom that the comprehensive wettability of a surface in air, in water and in oil has been reported. In this paper, the authors investigated the wettability of the stainless steel mesh coated with polyurethane in the above three different environments. The surface of the uncoated mesh was found to be hydrophobic in air, but the surface of the coated mesh was superhydrophilic in air. More interestingly, the surfaces of the coated meshes were superoleophilic in water and superhydrophobic in oil. Due to the coated meshes with these wettabilities were fabricated via a facile two-step method, the presented method may be adopted for large-scale industrial production, in various fields, such as icing prevention or the oil-field industry.
基金supported by the National Key Research and Development Program of China(Grant No.2020YFC1808401)the National Natural Science Foundation of China(Grant Nos.22078213,21938006,51973148,21776190)+1 种基金the Cutting-edge Technology Basic Research Project of Jiangsu(Grant No.BK20202012)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘The efficient and rapid separation of oil from stabilized oil-in-water emulsions with micro/nanometer size is a global challenge.Owing to the low oil content in oil-in-water emulsions,separating the oil by simply controlling the surface wettability is difficult.Controlling the pore size of the membrane surface to achieve separation will lead to a sharp decrease in flux.Herein,inspired by cell membrane transportation,a hydrophilic/hydrophobic bifunctional Janus membrane for stable oil-in-water separation was prepared by simple surface polymerization and vapor diffusion.The prepared Janus membrane contained a hydrophobic side and hydrophilic polyamine layer.When used for oil-in-water emulsion separation,the polyamine layer accumulated micro/nanometer oil droplets,forming an oil layer on the hydrophobic surface.Water was retained by the 1H,1H,2H,2H-perfluorooctyl trichlorosilane layer,allowing oil droplets to selectively permeate through the membrane,achieving the separation effect.As the pore size of the modified fabric was basically unchanged,the permeation flux was fast(1.53×10^(3) Lm^(−2) h^(−1)).Furthermore,the poly(N,N-dimethylaminoethyl methacrylate)layer destroyed the emulsion stability,making the emulsion droplets aggregate without affecting the separation efficiency with fast permeation flux.Therefore,the prepared bifunctional Janus membrane shows great potential for actual wastewater treatment.
基金The authors thank the National Natural Science Foundation of China (Nos. 51475200 and 51325501), Science and Technology Development Project of Jilin Province (No.20160204005SF and 20150519007JH) and 111 project (B16020) of China.
文摘Oily water treatment has attracted the attention of many researchers. The development of effective and cheap oil/water separation materials is urgent for treating this problem. Herein, inspired by superhydrophobic typical plant leaves such as lotus, red rose and marigold, superhydrophobic and superoleophilic copper mesh was fabricated by etching and then surface modi- fication with 1-dodecanethiol (HS(CH2)IlCH3). A rough silver layer is formed on the mesh surface after immersion. The ob- tained mesh surface exhibits superhydrophobicity and superoleophilicity and the static water contact angle was 153~ + 3~. In addition, the as-prepared copper mesh shows self-cleaning character with water and chemical stability. The as-prepared copper foam can easily remove the organic solvents either on water or underwater. We demonstrate that by using the as-prepared mesh, oils can be absorbed and separated, and that high separation efficiencies of larger than 92% are retained for various oils. Thus, such superhydrophobic and superoleophilic copper mesh is a very promising material for the application ofoil spill cleanup and industrial oily wastewater treatment.
基金the National Nature Science Foundation of China(No.21406188)the Natural Science Foundation of the Department of Educational of Shaanxi Province(No.17JS141)+1 种基金the Training Program of Innovation and Entrepreneurship for Undergraduates of Yan'an University(No.D2017006)Financially supported by school-level research project of Yan'an University(No.YDK2015-68).
文摘Magnetically driven super-hydrophobic materials were prepared by Fe3O4 nanoparticles and stearic acid,which were deposited on the surface of polyurethane sponges.The presence of the Fe3O4 nanoparticles makes the sponge have the magnetic,and the micro-nano hierarchical structure and hydrophobic functional groups lead to the sponge have excellent superhydrophobicity.The as-prepared sponge exhibited excellent absorption capacities for various oils and organic solvents ranging from 23.8 times to 86.7 times of its own weight.Moreover,the oil separation capacities still keep a high value after 50 cycles of squeezing the saturated absorbed as-prepared sponge.All of these satisfactory properties make the as-prepared sponge as a candidate of ideal absorbents for oily industrial wastewater and oil spills in oceans.