Distributed energy systems(DES),as an integrated energy system with coupled distributed energy resources,have great potential in reducing carbon dioxide emissions and improving energy efficiencies.Considering the back...Distributed energy systems(DES),as an integrated energy system with coupled distributed energy resources,have great potential in reducing carbon dioxide emissions and improving energy efficiencies.Considering the background of urbanization and the energy revolution in China,the study investigates the renewable-based DESs supply modes and their application in China.A new method is proposed to classify DESs supply modes into three categories considering the renewable resource in domination,and their application domains are discussed.A comprehensive model is given for economic and environmental evaluation.Typical case studies show that the renewable-based DES systems can supply the energy in a cost-effective and environment-friendly way.Among them,the biomass waste dominated supply mode can not only achieve"zero"carbon emissions but also"zero"energy consumption,even though not yet economically attractive under the present policy and market conditions.Thus,recommendations are given to promote the further deployment of renewable-based DESs,regarding their supply modes,policy requirements,and issues to be addressed.展开更多
This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V proces...This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V process. In order to meet the requirement of a wide temperature range and high yields of products, the schematic extracted from the layout is simulated with five process corners at 27℃ and 90℃. Simulation results demonstrate that the proposed integrated circuit is immune to noise and achieves skipping cycle control when switching mode power supply （SMPS） works with low load or without load.展开更多
A feedback control system is needed to restrain plasma vertical displacement in EAST （Experimental Advanced Superconducting Toknmak）. A fast control power supply excites active feedback coils, which produces a magne...A feedback control system is needed to restrain plasma vertical displacement in EAST （Experimental Advanced Superconducting Toknmak）. A fast control power supply excites active feedback coils, which produces a magnetic field to control the plasma＇s displacement. With the development of EAST, new demands on the new fast control power supply have led to an enhanced ability of fast response and output current, as well as a new control mode. The structure of cascaded and paralleled H-bridges can meet the demand of extended capacity, and digital control can reMize current and voltage mixed control mode. The validity of the proposed scheme is confirmed by experiments.展开更多
Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact ...Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact on both voltage and frequency. This paper presents the opportunity for monitoring the distributed electrical energy by means of a system that monitors, controls, and provides a breakpoint based on high or low voltage and frequency tripping mechanism that avoids any damage to the load. The designed system comprised a switch mode power supply (SMPS), a direct digital synthesizer (DDS), and PIC16F876A microcontroller techniques for stable voltage and frequency outputs. Proteus design suite version 8.11 software and Benchcope SDS1102CN were used for modeling and simulation. The hardware prototype was implemented at a telecom cell site for data capturing and analysis. Test results showed that the implementation of the prototype provided stable and constant outputs of 222 V/50 Hz and 112 V/60 Hz which constituted 99% and 99.8% efficiency for voltage and frequency performance respectively. The paper also discusses different technologies that can be adopted by the system to mitigate voltage and frequency effects on customer appliances.展开更多
基金supported by National Key Research and Development Program of China(No.2016YFB0900100)Sate Grid of China(Research on the development potential evaluation of distributed generation and its management and control and operation optimization technology under scaleup development stage.No.1400-201927279A-0-0-00)
文摘Distributed energy systems(DES),as an integrated energy system with coupled distributed energy resources,have great potential in reducing carbon dioxide emissions and improving energy efficiencies.Considering the background of urbanization and the energy revolution in China,the study investigates the renewable-based DESs supply modes and their application in China.A new method is proposed to classify DESs supply modes into three categories considering the renewable resource in domination,and their application domains are discussed.A comprehensive model is given for economic and environmental evaluation.Typical case studies show that the renewable-based DES systems can supply the energy in a cost-effective and environment-friendly way.Among them,the biomass waste dominated supply mode can not only achieve"zero"carbon emissions but also"zero"energy consumption,even though not yet economically attractive under the present policy and market conditions.Thus,recommendations are given to promote the further deployment of renewable-based DESs,regarding their supply modes,policy requirements,and issues to be addressed.
文摘This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V process. In order to meet the requirement of a wide temperature range and high yields of products, the schematic extracted from the layout is simulated with five process corners at 27℃ and 90℃. Simulation results demonstrate that the proposed integrated circuit is immune to noise and achieves skipping cycle control when switching mode power supply （SMPS） works with low load or without load.
基金supported by ITER Program of China(973 Program)(No.2011GB109002)National Natural Science Foundation of China(No.11275056)Hefei University of Technology Doctor Research Foundation of China(No.2011HGBZ1292)
文摘A feedback control system is needed to restrain plasma vertical displacement in EAST （Experimental Advanced Superconducting Toknmak）. A fast control power supply excites active feedback coils, which produces a magnetic field to control the plasma＇s displacement. With the development of EAST, new demands on the new fast control power supply have led to an enhanced ability of fast response and output current, as well as a new control mode. The structure of cascaded and paralleled H-bridges can meet the demand of extended capacity, and digital control can reMize current and voltage mixed control mode. The validity of the proposed scheme is confirmed by experiments.
文摘Voltage and frequency are usually considered and assessed independently in the design and operation of electrical networks. However, these two are linked. Each and every malfunctioning electrical system has an impact on both voltage and frequency. This paper presents the opportunity for monitoring the distributed electrical energy by means of a system that monitors, controls, and provides a breakpoint based on high or low voltage and frequency tripping mechanism that avoids any damage to the load. The designed system comprised a switch mode power supply (SMPS), a direct digital synthesizer (DDS), and PIC16F876A microcontroller techniques for stable voltage and frequency outputs. Proteus design suite version 8.11 software and Benchcope SDS1102CN were used for modeling and simulation. The hardware prototype was implemented at a telecom cell site for data capturing and analysis. Test results showed that the implementation of the prototype provided stable and constant outputs of 222 V/50 Hz and 112 V/60 Hz which constituted 99% and 99.8% efficiency for voltage and frequency performance respectively. The paper also discusses different technologies that can be adopted by the system to mitigate voltage and frequency effects on customer appliances.
