Semi-analytical solution for mechanical analysis of tunnels crossing strike-slip fault zone considering nonuniform fault displacement and uncertain fault plane position

The tunnel subjected to strike-slip fault dislocation exhibits severe and catastrophic damage.The existing analysis models frequently assume uniform fault displacement and fixed fault plane position.In contrast,post-earthquake observations indicate that the displacement near the fault zone is typically nonuniform,and the fault plane position is uncertain.In this study,we first established a series of improved governing equations to analyze the mechanical response of tunnels under strike-slip fault dislocation.The proposed methodology incorporated key factors such as nonuniform fault displacement and uncertain fault plane position into the governing equations,thereby significantly enhancing the applicability range and accuracy of the model.In contrast to previous analytical models,the maximum computational error has decreased from 57.1%to 1.1%.Subsequently,we conducted a rigorous validation of the proposed methodology by undertaking a comparative analysis with a 3D finite element numerical model,and the results from both approaches exhibited a high degree of qualitative and quantitative agreement with a maximum error of 9.9%.Finally,the proposed methodology was utilized to perform a parametric analysis to explore the effects of various parameters,such as fault displacement,fault zone width,fault zone strength,the ratio of maximum fault displacement of the hanging wall to the footwall,and fault plane position,on the response of tunnels subjected to strike-slip fault dislocation.The findings indicate a progressive increase in the peak internal forces of the tunnel with the rise in fault displacement and fault zone strength.Conversely,an augmentation in fault zone width is found to contribute to a decrease in the peak internal forces.For example,for a fault zone width of 10 m,the peak values of bending moment,shear force,and axial force are approximately 46.9%,102.4%,and 28.7% higher,respectively,compared to those observed for a fault zone width of 50 m.Furthermore,the position of the peak internal forces is influenced by variations in the ratio of maximum fault displacement of the hanging wall to footwall and the fault plane location,while the peak values of shear force and axial force always align with the fault plane.The maximum peak internal forces are observed when the footwall exclusively bears the entirety of the fault displacement,corresponding to a ratio of 0:1.The peak values of bending moment,shear force,and axial force for the ratio of 0:1 amount to approximately 123.8%,148.6%,and 111.1% of those for the ratio of 0.5:0.5,respectively.

The Middle and Lower Cambrian salt tectonics in the central Tarim Basin,China:A case study based on strike-slip fault characterization

Due to the considerable depth of the salt layers and the lack of calibration by exploratory drilling,the interpretation of the Middle and Lower Cambrian salt formations in the central Tarim Basin poses a challenge.In this paper,we apply the coupling and decoupling deformation theory in salt tectonics to analyze the No.7 fault mapped in the seismic datasets by the response characteristics of the Middle and Lower Cambrian layers.By quantifying the stratigraphic framework of the Middle and Lower Cambrian strata,we define the position of the salt layer with the seismic data.Structural decoupling is observed in the Middle and Lower Cambrian sequences in the Shuntuoguole Low Uplift,while deformation coupling is observed in these two sequences in the Shaya Uplift.

The Ophiolitic Mélanges in Strike-slip Fault Zones in West Junggar,Xinjiang,NW China

The West Junggar region of western China,located in the far eastern end of the Kazakhstan orocline,occupies the junction of the Siberia,Tarim and Kazakhstan blocks,which is crucial for palinspastic reconstruction of the CAOB.The principal rock assemblages in West Junggar include Paleozoic ophiolitic mélanges and a thick,undeformed Upper Devonian–Lower Carboniferous sedimentary succession as the boundary of the mélanges,both of which are intruded by sub-circular Upper Carboniferous granitoid plutons and intermediate-basic-mafic dykes.On the basis of the sedimentary structures like cross bedding and convolute bedding and the geochronology data,the Upper Devonian–Lower Carboniferous sedimentary successions were identified as the Tailegula,Baogutu,and Xibeikulasi formations from the bottom up,which is an apparent shallowing-upwards ocean basin fill succession,from radiolarian cherts through 2000 meters of flysch to a more neritic Baogutu Formation to a fluvial Xibeikulasi Formation.At the bottom of the Tailegula Formation there is a peperite-bearing unit:a succession of extrusive mafic rock,mainly basaltic lava,with interbeds or blocks of sedimentary rocks including carbonate,radiolarian chert,calcareous siltstone and minor fine-grained tuffaceous sandstone.Peperites in the Tailegula are thickest and best developed as the type section.Four types of peperites were identified based on of the volcanic clast shapes and sediment-matrix properties in Tailegula:(1)arbonatesediment-hosted fluidal peperites,(2)sandstone-hosted fluidal peperites,(3)tuff-hosted mixed fluidal and blocky peperites and(4)carbonate-sediment-hosted blocky peperites.Zircon LA-ICP-MS U-Pb dating of a tuff lens enclosed by lava showed that the peperites formed in the Late Devonian(ca.364 Ma).The widespread peperitebearing succession in the Tailegula Formation is of variablethickness at different sites in West Junggar,such as the Tailegula,Baijiantan,Kalaxiuka,Saertuohai,Dagun,west of the Akebastaw granite and Shinaizha areas.The peperite-bearing unit is generally undeformed in contrast to the highly deformed slices of ophiolite,and is continuously distributed as a stratigraphic section regionally on either side of the Darbut and Baijiantan ophiolitic belts.It can be taken as a mark layer to demonstrate the existence of a shallow remnant ocean basin from the end of Devonian in West Junggar,which is an important component of oceanic crust in the remnant ocean basin.Peperite,underlying Devonian or earlier oceanic crust developed in the spreading process of the ocean basin,and overlying Carboniferous remnant ocean basin-fill succession constitute the complete evolution sequence of the remnant ocean basin.The Darbut and Baijiantan ophiolitic belts should not be interpreted as significant plate boundaries and represent the underlying ocean crust uplifted along tectonic lineaments within a continuous shallow remnant ocean basin.The Baijiantan and Darbut ophiolites are both steep fault zones(>70°)of serpentinite mélange,in contact on either side with regionally distributed and undeformed Upper Devonian–Lower Carboniferous ocean-floor peperitic basalts and overlying sedimentary successions.Ultramafic rocks is serpentinized and foliated to form the matrix of mélange.Some small blocks of peridotite are mylonitic and strongly foliated.Blocks of gabbro generally underwent prehnitization,epidotization and chloritization and many are metasomatized to rodingite.Pods of medium to fine grained amphibolites are encased in serpentinite and display relict gabbroic textures and amphibolite-facies assemblages.The Baijiantan ophiolitic mélange also includes amphibolite brecciasconsistingofcentimeter-sizedmylonitic amphibolite clasts embedded within a serpentinite matrix.Basalt lavas cropping out in the Baijiantan ophiolitic mélange are of two types:type 1 and type 2 lavas.The type1 lavas occur within the fault zones as small blocks withinthe matrix of ultramafic rocks,tectonically juxtaposed against other rocks.The type 2 basalt lava came from the peperite-bearing unit.Besides the ultramafic rocks,gabbros,and basalt lavas,the other supracrustal rocks in the ophiolitic mélange include sandstone,chert,tuff,and very rare limestone.Sandstones predominate and most of them are tuffaceous;their characteristics are consistent with the sandstones from surrounding Lower Carboniferous sedimentary formations.Sandstone blocks within the mélanges also have detrital zircon age distributions(300-400 Ma)and characteristics similar to surrounding Carboniferous sediments.The rock assemblages in the mélanges indicate the ophiolitic mélanges consist of locally derived rocks,in contrast to conventional ophiolitic mélanges.The ophiolitic mélanges show classic structural features of strike-slip shearing regimes,including subhorizontal slickenside lineations(<20°),consistent steeply dipping foliation(>75°)in the matrix,and elongated shapes of blocks aligned parallel to the shear zone.Consistent shear-sense indicators including slip-fiber lineations,Riedel shears,asymmetric blocks,shear band cleavages and veins indicate a horizontal sinistral sense of movement.The occurrence of the amphibolite and ultramafic mylonite in the mélanges probably record early,deep-seated strike slip,indicating that the fault zones extended downward through the oceanic crust.The amphibolite-facies metamorphism then was superimposed by brittle deformation at a shallow level to form fault breccias during the mélange formation.So the ophiolitic mélanges originated from crustal-scale sinistral strike-slip fault zones,not as major plate boundaries or subduction-suture zones.The youngest units of the mélanges are the deformed blocks of Lower Carboniferous basin-fill sedimentary rocks,indicating that the ultimate formation of the mélanges was after deposition of the Lower Carboniferous strata(detrital zircon age modes:320-330 Ma),but before the age of the intruding granite and the dike cutting the mélanges(~310 Ma).Based on above discussions and taking into consideration of the previous studies,a tectonic evolution scenario is proposed for the Devonian to Carboniferous in the West Junggar region.In the middle Devonian or earlier(>390Ma),a paleo-ocean basin existed,stretching across North Xinjiang from Darbut-Baijiantan area in West Junggar to the Kalamaili area in East Junggar.This basin was most likelyaback-arcbasinrelatedtothe Boshchekule–Chengiz–Yemaquan arc.Subduction ended in thepaleo-oceanbasinrepresentedbythe Hongguleleng-Kujibai-Armantai ophiolite belt by late Devonian(375-360 Ma),leading to slab break-off and upwelling of asthenosphere under the remnant ocean basin,which induced The OIB-like basalts in West Junggar.The oceanic basin started to receive sufficient sediment deposition into which OIB-like basalts flows could bulldoze to form the regional distributed peperites(~360 Ma).A little later,in the early Carboniferous(~340 Ma),continent-continent collision took place between the Junggar block and the Yemaquan arc,and Kalamaili ophiolite obduction occurred in the eastern part of Junggar block.The remnant ocean basin was preserved in the western part of the Junggar Block.Accompanying the relative motion between Junggar block and ocean basin in West Junggar during collision,a series of NW trending sinistral strike-slip faults were triggered and activated parallel to the western boundary of the Junggar block.During the late stage of the Early Carboniferous(~320 Ma),the remnant ocean basin was almost filled with sediments.The collision between the Yili and Junggar blocks at the beginning of the late Carboniferous reactivated the strike-slip faults,which disrupted the oceanic crust and basin-fill successions and caused diapirs of serpentinite to form the Baijiantan and Darbut ophiolitic mélanges.The emplacement of Upper Carboniferous(~310 Ma)stitching A-type granitoid plutons indicates the evolutionary history of the remnant ocean basin and strike-slip fault zone ophiolitic mélanges terminated by that time.

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts： the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –（3±1） mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.

Deformation of the Most Recent Co-seismic Surface Ruptures Along the Garzê–Yushu Fault Zone(Dangjiang Segment)and Tectonic Implications For the Tibetan Plateau

The Garzê–Yushu strike-slip fault in central Tibet is the locus of strong earthquakes（M 〉 7）. The deformation and geometry of the co-seismic surface ruptures are reflected in the surface morphology of the fault and depend on the structure of the upper crust as well as the pre-existing tectonics. Therefore, the most recent co-seismic surface ruptures along the Garzê–Yushu fault zone（Dangjiang segment） reveal the surface deformation of the central Tibetan Plateau. Remote sensing images and field investigations suggest a 85 km long surface rupture zone（striking NW-NWW）, less than 50 m wide, defined by discontinuous fault scarps, right-stepping en echelon tensional cracks and left-stepping mole tracks that point to a left-lateral strike-slip fault. The gullies that cross fault scarps record systematic left-lateral offsets of 1.8 m to 5.0 m owing to the most recent earthquake, with moment magnitude of about M 7.5, in the Dangjiang segment. Geological and geomorphological features suggest that the spatial distribution of the 1738 co-seismic surface rupture zone was controlled by the pre-existing active Garzê–Yushu fault zone（Dangjiang segment）. We confirm that the Garzê–Yushu fault zone, a boundary between the Bayan Har Block to the north and the Qiangtang Block to the south, accommodates the eastward extrusion of the Tibetan Plateau and generates strong earthquakes that release the strain energy owing to the relative motion between the Bayan Har and Qiangtang Blocks.

A New Growth Model of Fault Attributes in a Strike-Slip Fault System in the Tarim Basin

Fault attributes generally display a consistent power–law-scaling relationship.Based on new 3 D seismic data,however,we found some exceptional fault attribute relationships of lengths(L)–throw(T)(vertical component of displacement),overlap zone length(Lo)–width(Wo)from a strike-slip fault system of the Ordovician carbonates in the Tarim Basin.The L–T relationship shows two linear segments with breakup at^40 km in fault length.This presents an exceptional throw increase in the second stage,which is attributed to a localization of vertical displacement and deformation in overlapping zones other than the different fault scales in a mature fault zone.The Lo–Wo relationship in the overlapping zones shows multiply stepped-shape patterns,suggesting multiple fault differential growth and periodic increase in fault size.Therefore,we propose a new alternative growth model of fault attributes in strike-slip fault zones,in which the overlapping zones accumulated localized displacement and deformation in the intracratonic strike-slip fault zone.

Holocene activity evidence on the southeast boundary fault of Heqing basin, middle segment of Heqing-Eryuan fault zone, West Yunnan Province, China

The Heqing-Eryuan fault is an important part of the active fault system in the Northwestern Yunnan Province, China. Thus, the study on the nature, characteristics and activity history of this fault can provide not only the basis for seismic safety and engineering evaluation, but also the important information for the characteristics, history and patterns of the structural deformation of the southeastern margin of the Tibetan Plateau. Trench and faulted landforms investigations could provide effective paleoseismic methods to obtain the recent parameters of active faults. Using these methods, this study makes some breakthroughs on the recent activity of southeast boundary fault of the Heqing basin, middle segment of Heqing-Eryuan fault zone. Results indicate that the average vertical slip rate and left-lateral slip rate of the segment are about 0.28 mm/a and 1.8o mm/a respectively since the Late Pleistocene. The trench near the Beixi Village at the .outhea.t houndnrv fault of the lqaaing basinreveals that there have been at least three paleoearthquake events during the Holocene （8 ka BP）. The vertical displacement and sinistral strike-slip distance of a single paleoearthquake are ~20 cm and -1.2 m, respectively. The estimated paleoearthquake magnitudes with Ms7.o, and the recurrence interval at 2-5 ka, as well as the latest activity time during 800- 290 ca1 yr BP, are of great significance for preventing and mitigating regional earthquake disasters.

Development of a fault-rupture environment in 3D: A numerical tool for examining the mechanical impact of a fault on underground excavations

While faults are commonly simulated as a single planar or non-planar interface for a safety or stability analysis in underground mining excavation, the real 3D structure of a fault is often very complex, with different branches that reactivate at different times. Furthermore, these branches are zones of nonzero thickness where material continuously undergoes damage even during interseismic periods. In this study, the initiation and the initial evolution of a strike-slip fault was modeled using the FLAC3D software program. The initial and boundary conditions are simplified, and mimic the Riedel shear experiment and the constitutive model in the literature. The FLAC3D model successfully replicates and creates the 3D fault zone as a strike-slip type structure in the entire thickness of the model. The strike-slip fault structure and normal displacement result in the formation of valleys in the model. Three panels of a longwall excavation are virtually placed and excavated beneath a main valley. The characteristics of stored and dissipated energy associated with the panel excavations are examined and observed at different stages of shear strain in the fault to evaluate bump potential. Depending on the shear strain in the fault, the energy characteristics adjacent to the longwall panels present different degrees of bump potential, which is not possible to capture by conventional fault simulation using an interface.

Analysis of the Motion and Deformation Characteristics along the Zhangjiakou-Bohai Fault

We have collected GPS data in the period of 1999-2007 from the Crustal Motion Observation Network of China along the Zhangjiakou-Bohai fault and its adjacent regions to study the characteristics of present-day crustal horizontal motion velocities in the research zone.Strain rate components are computed in the spheric coordinate system by the least square collocation method.According to the spatial distribution of the principal strain rate,dilation rate and maximum shear strain rate derived from GPS measurements,this paper analyses the deformation of the subordinary faults of the Zhangjiakou-Bohai fault.The principal compression strain rates are apparently greater than the principal extension strain rates.The larger shear strain rate is mainly in and around the Xianghe,Wenan and Tangshan areas in Hebei Province.According to the profiles across different segments of the Zhangjiakou-Bohai fault,the three segments glong the Zhangjiakou-Bohai fault show an obviously left-lateal strike-slip and compression characteristics.By analysis of the motion characteristics of the blocks,e.g.the Yanshan block,North China Plain block,Ordos block,and Ludong-Huanghai block in and around the North China region,this paper speculates that the dynamics of the motion styles of Zhangjiakou-Bohai fault may directly come from the relative movement between the Yanshan block and the North China plain block,and the ultimate dynamics may be the results of the collison between Indian plate and Eurasian plate,and the persistent northeastward extrusion of the Indian plate.

Sedimentary and tectonic evolution of the Banquan pull-apart basin and implications for late Cenozoic dextral strike-slip movement of the Tanlu Fault Zone

The Banquan Basin is a pull-apart basin with the largest scale and the most prominent structure due to dextral slip of the Tanlu Fault Zone(TLFZ) in late Cenozoic. The depositional history of the basin records the start time and evolution of the right-lateral strike-slip movement of the TLFZ. This paper studies the sedimentary and tectonic evolution of the Banquan Basin by seismic reflection exploration, borehole detection and cosmogenic nuclide chronology. We analyze the coupling relationship between the pull-apart basin and the strike-slip fault and discuss the start time and tectonic significance of the right-lateral strikeslip of the TLFZ. Our study indicates that the Banquan Basin has undergone three evolutionary stages: weak rifting during the pre-pull-apart period, strong extension during the syn-pull-apart period and subsidence during the post-pull-apart period. This implies that the TLFZ, which controls the evolution of the basin, experienced an evolutionary process of weak activity,intensified activity and migration of activity toward the central basin. The sedimentary filling of the basin has strong response to the episodic pull-apart and extension of the basin. Lying upon the basement of the basin, a thin layer of Miocene mudstone slowly accumulated due to local rifting before the strong pull-apart event. Along with the dextral slipping and pull-apart process, the basin was filled with alluvial fan facies, fluvial facies and floodplain facies strata from bottom to top. The latest tectonic movement of the TLFZ in the North China Block in late Cenozoic was dominated by episodic dextral strike-slip motion, and this deformation pattern started at 4.01±1.27 Ma. The latest tectonic deformation in North China since late Cenozoic was governed by eastward extrusion and tectonic orogenesis of the eastern margin of the Qinghai-Xizang Plateau since late Miocene. The eastward thrusting of the Liupanshan fault zone and sinistral shearing of the Qinling fault zone led to the anticlockwise rotation and pushing of secondary blocks in North China, resulting in a planar bookshelf faulting and rotation pattern. This unique deformation pattern transferred eastwards to the North China Plain at ~4.01 Ma and the process continues to the present time.This planar bookshelf rotation, accompanied with regional sinistral strike-slip movement of the ~EW-trending boundary fault zones to the north and south of the North China Block and dextral strike-slip motion of the NNE-trending boundary faults between secondary blocks, is likely to be the long-range effect of the strong extrusion of the eastern margin of the QinghaiXizang Plateau.

超压泥岩盖层中断层垂向封闭能力研究方法及其应用

为了研究断裂在油气聚集与保存中的作用,在有、无超压泥岩盖层中断裂垂向封闭油气作用及差异性研究的基础上,针对断层垂向封闭能力的对比,利用围岩排替压力与其泥质含量和压实成岩埋深之间的经验关系,计算并求取断层岩排替压力,从而建立了一套超压泥岩盖层中断裂垂向封闭能力的研究方法,并将其应用于海拉尔盆地乌尔逊凹陷苏仁诺尔断裂带内,定量得出断层岩排替压力,完成苏仁诺尔断裂超压泥岩盖层内的垂向封闭性评价。结果表明,苏仁诺尔断裂在大磨拐河组一段具有较弱的封闭能力,不利于油气聚集与保存,这与该断裂带油气分布广但储量丰度低这一现象吻合较好,由此证实,该方法用于定量研究超压泥岩盖层中断裂垂向封闭能力是可行的。

乌尔逊凹陷北部苏仁诺尔断裂带在大一段垂向封闭性演化及其研究意义

为了研究乌尔逊凹陷北部苏仁诺尔断裂带在大一段的垂向封闭性演化,在分析其发育及活动特征的基础上,利用断裂面压力和断裂带中泥质含量研究了其垂向封闭性。结果表明,该断裂带在大一段内均垂向封闭,且分布于整个空间。苏仁诺尔断裂带在大一段的垂向封闭性演化分析表明,乌39号断裂和乌76号断裂分别于伊敏组沉积末期和青山岗组沉积早期开始形成垂向封闭性,之后随埋藏深度增加,断裂面压力增大,断裂带垂向封闭性逐渐增强。苏仁诺尔断裂带在大一段内的垂向封闭性有利于油气在南二段的聚集与保存;断裂带的垂向封闭形成时期与烃源岩大量排烃期的匹配关系较好,有利于油气大规模富集成藏。

乌尔逊凹陷苏仁诺尔CO_(2)气藏主控因素分析

乌尔逊凹陷苏仁诺尔走滑断裂带西部南屯组发育天然CO_(2)气藏。利用测井、地震、岩心、生产数据等资料,采用序贯高斯模拟方法,建立苏仁诺尔气田南屯组三维地质模型,包括构造模型(地层、断裂带)、岩性模型、物性模型,分析乌尔逊凹陷南屯组的地层格架、断裂分布,以及砂岩储层和物性的三维空间展布特征。结果表明:乌尔逊凹陷苏仁诺尔气田南屯组储层具有低孔隙度、低渗透率的特点,CO_(2)气藏主要分布于断裂活动带构造高点。苏仁诺尔走滑断裂带作为运移通道,对CO_(2)气藏分布起决定性作用;储层岩性和物性在控制CO_(2)气藏聚集和分布中起次要作用。该结果对寻找研究区CO_(2)气藏及后期勘探开发具有指导意义。

Structural characteristics of the Tan-Lu fault zone in Cenozoic basins offshore the Bohai Sea

The Tan-Lu fault zone across the eastern margin of the Cenozoic basins offshore the Bohai Sea is a NNE-trending right-lateral strike-slip fault system developed in the Cenozoic basin cover. It cuts through NE-to NNE-striking major extensional faults that controlled the formation of Paleogene basins. Recent petroleum exploration indicates that Cenozoic structural activities of the Tan-Lu fault system have directly or indirectly affected oil and gas distribution offshore the Bohai Sea. As part of a deep fault zone the Tan-Lu fault zone has been activated since the Oligocene,and obviously affected the tectonic evolution of offshore Bohai basins since then. The formation of Paleogene rift basins offshore the Bohai Sea has utilized the pre-existing structural elements of the Tan-Lu fault zone that developed in the late Mesozoic.

Determination of the Altyn Tagh strike-slip fault basin and its relationship with mountains

A special extended basin topography is developed in the middle segment of the Altyn Tagh Fault Zone. The ratio of its length to width is over 50. The long boundaries at the two sides of the basin are controlled by the straight normal faults with strike-slip component. Within the basin, the Cenozoic strata are spread. The Altyn Tagh main fault goes through the basin, and a series of strike-slip topography was formed within the basin. The reverse thrust structures were formed at the two sides of the center of the basin, thus making the geological bodies composed of old metamorphic rocks at the two sides of the basin extrude vertically, and forming the extended massif (mountain) at the sides of the basin and parallel to the basin. This special topography was called the strike-slip fault basin. The giant extended strike-slip fault basin began to form during Pliocene, and its topography was basically formed during the late Pleistocene. It is the special topography formed during the strike-slip deformation

Deep Structural Framework and Genetic Analysis of Gold Concentration Areas in the Northwestern Jiaodong Peninsula, China： A New Understanding based on High-Resolution Reflective Seismic Survey

The gold concentration areas in the northwestern Jiaodong Peninsula constituted an important gold metallogenetic region in Eastern China during the Mesozoic. The deep geological bodies＇ texture characteristic is important for exploring the resources thoroughly and understanding the metallogenic process. The detailed textures were revealed using high-resolution seismic profiles through the three major ore-controlling structures-Sanshandao fault zone, Jiaojia fault zone and Zhaoping fault zone. This study aims to establish a deep structural framework of this area. Based on their formation mechanism, the fault structures developed in the area can be divided into regional and local fault structures. The structural styles are characterised by superimposing their compressional, strike-slip and extensional multi-stage activities. The crust is cut by vertical structures corresponding to a left-lateral strike-slip fault system on the surface. Nearby these structures are the arc-shape structures formed by multi-stage magma intrusions into the upper crust. Bounded by the Tancheng–Lujiang and Muping–Jimo fault zones, the current Jiaodong block, developed a series of NE-trending strike-slip fault systems, was probably formed by the assemblage of several obliquely aligned blocks. The intensive magmatism and hydrothermal activity between the blocks induced large-scale mineralisation. It provides a new angle of view for understanding the cratonic destruction and large ore-concentration formed during the Mesozoic.