Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological...Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological characteristics of the polymers were investigated by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravimetric analysis （TGA）, elemental analysis and nitrogen adsorption-desorption test. The obtained results showed that the SMIPs displayed great adsorption capacity （13.5 lag/mg）, high recognition ability （the imprinted factor is 3.2） and good binding kinetics for ampicillin sodium. Finally, as solid phase extraction adsorbents, the SMIPs coupled with HPLC method were validated and applied for the enrichment, purification and determination of anapicillin sodium in real milk and blood samples. The averages of spiked accuracy ranged from 92.1% to 107.6%. The relative standard deviations of intra- and inter-day precisions were less than 4.6%. This study provides a new and promising method for enriching, extracting and determining ampicillin sodium in complex biological samples.展开更多
Surface molecularly imprinted polymers （SMIP） was prepared via the reversible addition-fragmentation chain transfer （RAFT） polymerization on the chloromethyl polystyrene resin （CPR） in the presence of the templa...Surface molecularly imprinted polymers （SMIP） was prepared via the reversible addition-fragmentation chain transfer （RAFT） polymerization on the chloromethyl polystyrene resin （CPR） in the presence of the template D-phenylalanine. The structure of SMIP was characterized by FTIR and SEM. The adsorption behavior of D-phenylalanine of SMIP was preliminarily investigated.展开更多
In this paper, a surface plasmon resonance （SPR） sensor chip for detection of bovine serum album （BSA） was prepared by electropolymerization of 3-aminophenylboronic acid （3-APBA） based on molecularly imprinted p...In this paper, a surface plasmon resonance （SPR） sensor chip for detection of bovine serum album （BSA） was prepared by electropolymerization of 3-aminophenylboronic acid （3-APBA） based on molecularly imprinted polymer （MIP） technique. The surface morphology of MIP and non-imprinted （NIP） films were characterized by scanning electroscopy （SEM）. SEM images exhibited nanoscale cavities formed on the MIP films surface homogeneously due to the removal of BSA templates. The effects of pH, ion strength of rebinding BSA, the specific binding and selective recognition were studied for MIP films. Results indicated that the BSA-imprinted films exhibited a good adsorption of template protein （0.02-0.8 mg/mL） in 0.05 mol/L sodium phosphate buffer at pH 5.0 with the limit of detection （LOD） of 0.02 mg/mL.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. 81573391 and 81173024)the National Key Projects of China (No. 812277802)
文摘Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological characteristics of the polymers were investigated by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravimetric analysis （TGA）, elemental analysis and nitrogen adsorption-desorption test. The obtained results showed that the SMIPs displayed great adsorption capacity （13.5 lag/mg）, high recognition ability （the imprinted factor is 3.2） and good binding kinetics for ampicillin sodium. Finally, as solid phase extraction adsorbents, the SMIPs coupled with HPLC method were validated and applied for the enrichment, purification and determination of anapicillin sodium in real milk and blood samples. The averages of spiked accuracy ranged from 92.1% to 107.6%. The relative standard deviations of intra- and inter-day precisions were less than 4.6%. This study provides a new and promising method for enriching, extracting and determining ampicillin sodium in complex biological samples.
文摘Surface molecularly imprinted polymers （SMIP） was prepared via the reversible addition-fragmentation chain transfer （RAFT） polymerization on the chloromethyl polystyrene resin （CPR） in the presence of the template D-phenylalanine. The structure of SMIP was characterized by FTIR and SEM. The adsorption behavior of D-phenylalanine of SMIP was preliminarily investigated.
基金the National Natural Science Foundation of China(No.20771015)the 111 Project(No.B0712)for the funding
文摘In this paper, a surface plasmon resonance （SPR） sensor chip for detection of bovine serum album （BSA） was prepared by electropolymerization of 3-aminophenylboronic acid （3-APBA） based on molecularly imprinted polymer （MIP） technique. The surface morphology of MIP and non-imprinted （NIP） films were characterized by scanning electroscopy （SEM）. SEM images exhibited nanoscale cavities formed on the MIP films surface homogeneously due to the removal of BSA templates. The effects of pH, ion strength of rebinding BSA, the specific binding and selective recognition were studied for MIP films. Results indicated that the BSA-imprinted films exhibited a good adsorption of template protein （0.02-0.8 mg/mL） in 0.05 mol/L sodium phosphate buffer at pH 5.0 with the limit of detection （LOD） of 0.02 mg/mL.
