The dissolution of total suspended solids and treatment strategy of tailwater in a Litopenaeus vannamei recirculating aquaculture system

In recirculating aquaculture systems(RASs),the effective treatment of aquaculture tailwater is essential to maintain the health of the RAS.This study investigated the optimal time and method for tailwater treatment during three periods of the aquaculture of the Litopenaeus vannamei:nursery(0–26 d),middle(27–57 d),and later(57–104 d).The variation of several water parameters during the dissolution of total suspended solid(TSS)in tailwater,applied with the effects of ozone on the microorganism and water quality parameters were investigated.Results showed that the TSS concentrations in tailwater decreased with time,although not significantly(P>0.05),whereas total ammonia nitrogen(TAN),nitrite(NO-2-N),and nitrate(NO_(3)^(-)-N)increased significantly(P<0.05).Therefore,TSS should be removed from the tailwater as early as possible,being most optimal within 4 h.Ozone removed 38.24%–48.95%of TSS,17.78%–90.14%of TAN,and 87.50%–98.90%of NO-2-N after 4 h of treatment.However,it resulted in the significant accumulation of NO_(3)^(-)-N.Moreover,the total number of Vibrio and bacterial counts in aquaculture tailwater was reduced completely by ozone within 4 h.Thus,these results provided technical details and data support for the effective treatment of tailwater from shrimp RAS.

Using Natural Radionuclides to Trace Sources of Suspended Particles in the Lower Reaches of the Yellow River

Natural radionuclides are powerful tools for understanding the sources and fate of suspended particulate matter(SPM).Particulate matter with different particle sizes behaves differently with respect to adsorption and desorption.We analyzed the activi-ties and distribution characteristics of multiple natural radionuclides(238U,226Ra,40K,228Ra,7Be and 210Pbex)on size-fractionated SPM at the Lijin Hydrographic Station(Huanghe or Yellow River)every month over a one-year period.Results showed that medium silt(16–32µm)was the main component.As expected,the activity of each radionuclide decreased with an increase of particle size.We examined the sources of SPM with different particle sizes using activity ratios of 226Ra/238U,228Ra/226Ra,40K/238U and 7Be/210Pbex,and concluded that SPM with different particle sizes originated from different sources.Our results indicate that fine SPM(<32µm)was mainly from the erosion of soil along the lower reaches of the Yellow River,while coarse SPM(>32µm)was mainly derived from resuspension of riverbed sediment.During high runoff periods,the concentration of SPM increased significantly,and the pro-portion of fine particles originating upstream increased.Naturally occurring radioactive isotopes,especially on size-fractionated par-ticles,are therefore seen as useful tracers to understand the sources and behaviors of riverine particles transported from land to sea.

Electrically-driven ultrafast out-of-equilibrium light emission from hot electrons in suspended graphene/hBN heterostructures

Nanoscale light sources with high speed of electrical modulation and low energy consumption are key components for nanophotonics and optoelectronics.The record-high carrier mobility and ultrafast carrier dynamics of graphene make it promising as an atomically thin light emitter which can be further integrated into arbitrary platforms by van der Waals forces.However,due to the zero bandgap,graphene is difficult to emit light through the interband recombination of carriers like conventional semiconductors.Here,we demonstrate ultrafast thermal light emitters based on suspended graphene/hexagonal boron nitride(Gr/hBN)heterostructures.Electrons in biased graphene are significantly heated up to 2800 K at modest electric fields,emitting bright photons from the near-infrared to the visible spectral range.By eliminating the heat dissipation channel of the substrate,the radiation efficiency of the suspended Gr/hBN device is about two orders of magnitude greater than that of graphene devices supported on SiO2or hBN.Wefurther demonstrate that hot electrons and low-energy acoustic phonons in graphene are weakly coupled to each other and are not in full thermal equilibrium.Direct cooling ofhigh-temperature hot electrons to low-temperature acoustic phonons is enabled by the significant near-field heat transfer at the highly localized Gr/hBN interface,resulting in ultrafast thermal emission with up to 1 GHz bandwidth under electrical excitation.It is found thatsuspending the Gr/hBN heterostructures on the SiO2trenches significantly modifies the light emission due to the formation of the optical cavity and showed a~440%enhancement inintensity at the peak wavelength of 940 nm compared to the black-body thermal radiation.The demonstration of electrically driven ultrafast light emission from suspended Gr/hBNheterostructures sheds the light on applications of graphene heterostructures in photonicintegrated circuits,such as broadband light sources and ultrafast thermo-optic phase modulators.

Coastal Current Systems and the Movement and Expansion of Suspended Sediment from Changjiang River Estuary

This paper, with NOAA/AHHRR data for 2 years, discusses the expanding path and extent of suspended sediment from the Changjiang River, and the relationship between the suspended sediment expanding and coastal current systems by analyzing the thermal infrared imagery with the sediment imagery, which is acquired by correlating the atmosphere corrected AVHRR imagery with in-situ suspended sediment data. The coastal current systems affecting the sediment dispersal mainly include： the Taiwan Warm Current （TWC）, the Huanghai Sea Mixed Water （HSMW）, North Jiangsu near-shore current, and Zhejiang near-shore current etc. In winter, the current systems are stable. Their distribution affects the sediment from north Jiangsu expanding toward the Changjiang estuary in some degree .The front between Zhejiang coastal current and TWC blocks the expanding of sediment toward the sea. In the flood season, apart from the limitation by coastal current systems, the spatial and temporal distribution of suspended sediment is also affected by the runoff, which shows as the jet stream and fresh water. Spring and autumn are the transitional periods of the forming of expanding patterns of flood season and winter respectively. In addition, the re-suspended sediment caused by the wind wave may make the expanding range of near-shore sediment larger.

Occupational Eye Lens Radiation Dose While Performing Interventional Procedures over 18 Months Using a Face-Shield Equipped Suspended Radiation Protection System

Background: Numerous studies have demonstrated increasing evidence for cataractogenesis at lower levels of ionizing radiation than previously believed, with some suggesting possible absence of a threshold. Genetic differences between individuals also result in increased susceptibility in some operators, who might not be aware. European occupational exposure limits have been reduced and operators are seeking protective measures. Objective: To evaluate the protective effect of a face-shield equipped suspended protection system (Zero-Gravity®, TIDI Products, Neenah, WI) along with adherence to safety practices against radiation dose to the eye lens for an interventional radiologist performing a wide variety of procedures. Materials and Methods: In this institutional review board-approved single-institution study, one interventional radiologist wore a highly sensitive personnel monitoring dosimeter badge on the cap near the left eye while performing 299 procedures (3690 fluoroscopy minutes) over 18 consecutive months while utilizing the suspended protection system along with adherence to other generally recommended safety practices and movement away from the field during angiographic power injections. Dosimetry reports and procedural information were retrospectively reviewed. Results: Total lens dose equivalent to the left eye over 18 months was 0.11 mSv (annualized dose = 0.073 mSv, or 7.3 mRem). The patient-dose-area product standardized dose of 0.00576 μSv/Gy⋅cm2 is well below reports of conventional lead aprons, shields, and protective eyewear. Conclusion: Eye exposures were kept to near-background levels using the materials and methods of this study while performing a wide variety of complex procedures from all positions around the patient.

Random vortex induced vibration response of suspended flexible cable to fluctuating wind

A popular dynamical model for the vortex induced vibration(VIV)of a suspended flexible cable consists of two coupled equations.The first equation is a partial differential equation governing the cable vibration.The second equation is a wake oscillator that models the lift coefficient acting on the cable.The incoming wind acting on the cable is usually assumed as the uniform wind with a constant velocity,which makes the VIV model be a deterministic one.In the real world,however,the wind velocity is randomly fluctuant and makes the VIV of a suspended flexible cable be treated as a random vibration.In the present paper,the deterministic VIV model of a suspended flexible cable is modified to a random one by introducing the fluctuating wind.Using the normal mode approach,the random VIV system is transformed into an infinite-dimensional modal vibration system.Depending on whether a modal frequency is close to the aeolian frequency or not,the corresponding modal vibration is characterized as a resonant vibration or a non-resonant vibration.By applying the stochastic averaging method of quasi Hamiltonian systems,the response of modal vibrations in the case of resonance or non-resonance can be analytically predicted.Then,the random VIV response of the whole cable can be approximately calculated by superimposing the response of the most influential modal vibrations.Some numerical simulation results confirm the obtained analytical results.It is found that the intensity of the resonant modal vibration is much higher than that of the non-resonant modal vibration.Thus,the analytical results of the resonant modal vibration can be used as a rough estimation for the whole response of a cable.

Numerical Simulation of Bed Load and Suspended Load Sediment Transport Using Well-Balanced Numerical Schemes

Sediment transport can be modelled using hydrodynamic models based on shallow water equations coupled with the sediment concentration conservation equation and the bed con-servation equation.The complete system of equations is made up of the energy balance law and the Exner equations.The numerical solution for this complete system is done in a seg-regated manner.First,the hyperbolic part of the system of balance laws is solved using a finite volume scheme.Three ways to compute the numerical flux have been considered,the Q-scheme of van Leer,the HLLCS approximate Riemann solver,and the last one takes into account the presence of non-conservative products in the model.The discretisation of the source terms is carried out according to the numerical flux chosen.In the second stage,the bed conservation equation is solved by using the approximation computed for the system of balance laws.The numerical schemes have been validated making comparisons between the obtained numerical results and the experimental data for some physical experiments.The numerical results show a good agreement with the experimental data.

3D bioprinting of complex biological structures with tunable elastic modulus and porosity using freeform reversible embedding of suspended hydrogels

Three-dimensional(3D)bioprinting has been used widely for the construction of hard tissues such as bone and cartilage.However,constructing soft tissues with complex structures remains a challenge.In this study,complex structures characterized by both tunable elastic modulus and porosity were printed using freeform reversible embedding of suspended hydrogels(FRESHs)printing methods.A mixture of alginate and gelatin was used as the main functional component of the bioink.Rheological analysis showed that this bioink possesses shear thinning and shear recovery properties,supporting both cryogenic and FRESH printing methods.Potential printing capabilities and limitations of cryogenic and FRESH printing were then analyzed by printability tests.A series of complex structures were printed by FRESH printing methods which could not be realized using conventional approaches.Mechanical tests and scanning electron microscopy analysis showed that the printed structure is of excellent flexibility and could be applied in various conditions by adjusting its mechanical modulus and porosity.L929 fibroblast cells maintained cell viability in cell-laden-printed structures,and the addition of collagen further improved the hydrogels’biocompatibility.Overall,all results provided useful insight into the building of human soft tissue organ blocks.

Characteristics of suspended planar-type gas sensor based on MEMS process

In order to simplify the fabrication process,distribute the temperature uniformly and reduce the power consumption of the micro-hotplate（MHP） gas sensor,a planar-type gas sensor based on SnO2 thin film with suspended structure is designed through a MEMS process.Steady-state thermal analysis of the gas sensor and the closed membrane type sensor where the membrane overlaps the Si substrate is carried out with the finite element model,and it is shown that the suspended planar-type gas sensor has a more homogeneous temperature distribution and a lower power consumption.When the maximum temperature on the sensor reaches 383℃,the power consumption is only 7 mW,and the temperature gradient across the thin film is less than 14℃.To overcome the fragility of the suspended beams,a novel fabrication process in which the deposition of the gas sensing film occurs prior to the formation of suspended beams is proposed.The back side of the Si substrate is etched through deep reactive ion etching（DRIE） to avoid chemical pollution of the front side.The fabrication steps in which only four masks are used for the photolithography are described in detail.The Fe doped SnO2 thin film synthesized by sol-gel spin-coating is used as the gas sensing element.The device is tested on hydrogen and exhibits satisfactory sensing performance.The sensitivity increases with the rise of the concentration from 50×10-6 to 2000×10-6,and reaches about 30 at 2000×10-6.

A New Method for Calculation of Natural Frequency of Suspended Pipeline

The buried pipelines are widely used in oil transportation. The pipelines become suspended in the river with flushing of floodwater. If the frequency of vortex shedding is near to the nature frequency of pipelines, it will cause resonance of the suspended pipeline and result in the damage of pipelines. In this paper, the buried parts of pipeline in soil are treated as the half unlimited long beam placed on the elastic foundations. The vibration partial differential equations of suspended pipe and the parts buried in soil are derived respectively. The iterative calculation method is then presented. The results obtained from the suggested method are proved to be identical with the measured values.

Variations in tidal currents and suspended sediment concentration of the upper part of the North Channel of Changjiang Estuary over the past 10 years

The tidal current duration （TCD） and velocity （TCV） and suspended sediment concentration （SSC） were measured in the dry season in December, 2011 and in the flood season in June, 2012 at the upper part of the North Channel of Changjiang Estuary. They were assimilated with the measured data in 2003, 2004, 2006 and 2007, using the tidal range＇s proportion conversion. Variations in TCD and TCV, preferential flow and SSC have been calculated. Influences of typical engineering projects such as Qingcaosha fresh water reservoir, Yangtze River Bridge, and land reclamation on the ebb and flood TCD, TCV and SSC in the North Channel for the last 10 years are discussed. The results show that： （1） currently, in the upper part of North Channel, the ebb tide dominates; after the construction of the typical projects, ebb TCD and TCV tends to be larger and the vertical average ebb and flood SSC decrease during the flood season while SSC increases during the dry season; （2） changes in the vertical average TCV are mainly contributed by seasonal runoff variation during the flood season, which is larger in the flood season than that in the dry season; the controlling parameters of increasing ebb TCD and TCV are those large-scale engineering projects in the North Channel; variation in SSC may result mainly from the reduction of basin annual sediment loads, large-scale nearshore projects and so on.

Dynamic response analysis of the submarine suspended pipeline impacted by dropped objects based on LS-DYNA

Based on ANSYS/LS-DYNA, the dynamics analysis software, and using nonlinear dynamic finite element method, the process of a submarine pipeline impacted by dropped objects is simulated, Some conclusions are drawn： First, the damage depth of suspended pipe is smaller than that of the bare pipe in case of the same fall energy, and with the increase of fall energy, the difference grows; Second, with the falling object＇s speed and mass rising, the deformation of pipeline intensifies at the impact site and the maximum vibration amplitude of submarine pipeline increases; Third, when the fall energy is equal, the smaller the contact area of falling objects and pipeline is, the greater the damage depth of pipeline becomes; Fourth, changes of seabed soil parameters （shear elastic modulus, internal friction angle, density） have less influence on the suspended pipeline＇s dent depths and maximum vibration amplitude,

MEMS Inductor Consisting of Suspended Thick Crystalline Silicon Spiral with Copper Surface Coating

A novel MEMS inductor consisting of a planar single crystalline silicon spiral with a copper surface coating as the conductor is presented. Using a silicon-glass anodic bonding and deep etching formation-and-release process,a 40μm-thick silicon spiral is formed, which is suspended on a glass substrate to eliminate substrate loss. The surfaces of the silicon spiral are coated with highly conformal copper by electroless plating to reduce the resis- tive loss in the conductor,with thin nickel film plated on the surface of the copper layer for final surface passivation. The fabricated inductor exhibits a self-resonance frequency higher than 15GHz,with a quality factor of about 40 and an inductance of over 5nil at 11.3GHz. Simulations based on a compact equivalent circuit model of the inductor and parameter extraction using a characteristic-function approach are carried out,and good agreement with measurements is obtained.

Threshold friction velocity influenced by soil particle size within the Columbia Plateau, northwestern United States

Wind erosion is a geomorphic process in arid and semi-arid areas and has substantial implications for regional climate and desertification.In the Columbia Plateau of northwestern United States,the emissions from fine particles of loessial soils often contribute to the exceedance of inhalable particulate matter(PM)with an aerodynamic diameter of 10μm or less(PM10)according to the air quality standards.However,little is known about the threshold friction velocity(TFV)for particles of different sizes that comprise these soils.In this study,soil samples of two representative soil types(Warden sandy loam and Ritzville silt loam)collected from the Columbia Plateau were sieved to seven particle size fractions,and an experiment was then conducted to determine the relationship between TFV and particle size fraction.The results revealed that soil particle size significantly affected the initiation of soil movement and TFV;TFV ranged 0.304-0.844 and 0.249-0.739 m/s for different particle size fractions of Ritzville silt loam and Warden sandy loam,respectively.PM10 and total suspended particulates(TSP)emissions from a bed of 63-90μm soil particles were markedly higher for Warden sandy loam than for Ritzville silt loam.Together with the lower TFV of Warden sandy loam,dust emissions from fine particles(<100μm in diameter)of Warden sandy loam thus may be a main contributor to dust in the region's atmosphere,since the PM10 emissions from the soil erosion surfaces and its ensuing suspension within the atmosphere constitute an essential process of soil erosion in the Columbia Plateau.Developing and implementing strategic land management practices on sandy loam soils is therefore necessary to control dust emissions in the Columbia Plateau.

Numerical Modelling of Sediment Particle Transportation on a Navigation Inlet Using the Particle Tracking Model (PTM)

This paper investigates particle transportation using a numerical model application approach to understand the final fate of suspended sediment particle masses due to a dredging operation in a navigational harbor inlet using PTM (Particle Tracking Model). The investigation applied PTM and simulated particle transportation at a navigational harbor called St Jerome Creek Inlet in Chesapeake Bay in Maryland. The United States Army Corps of Engineers (USACE), Maryland District, designed jetties for the inlet, which, when constructed, would minimize dredging requirements from once in a two-year period to once in a ten-year period. In the meantime, due to the frequent dredging requirements of the inlet, there exists a need to understand the fate of the suspended sediments from the dredging operations to assess the environmental impact on the aquatic environment and the coastal community. This study used PTM to simulate the transportation of sediments in a 30-day period during a dredging operation. Ten sediment source locations were selected as possible sites from which dredged materials could be introduced into the flow system. The model output was analyzed to draw conclusions. Results showed that most suspended sediment particle masses moved from their initial site locations and settled along the shoreline, whilst the sediments that found their way out of the inlet system towards the ocean migrated southward and settled approximately 6 miles at the tip of the mainland. The objective of the study is to track sediment particles from a dredging operation. This would be significant in tracking possible contaminants in an aquatic environment for future environmental management decisions.

Suspended moxibustion relieves chronic visceral hyperalgesia and decreases hypothalamic corticotropin-releasing hormone levels

AIM:To evaluate the effect of suspended moxibustion(SM) on rectal sensory thresholds and to analyze the possible mechanisms involved in SM treatment of chronic visceral hypersensitivity(CVH) in rats.METHODS:SM was administered once daily to 37-dold CVH rats for 7 d.The two pairs of acupoints(ST25 and ST37,bilateral) were simultaneously treated with SM.Each treatment lasted for 30 min.Rats undergoing treatment with SM were not anesthetized.Untreated CVH rats and normal rats were used as controls.The abdominal withdrawal reflex was determined 30-90 min after the seven treatments.The hypothalamic corticotropin-releasing hormone(CRH) mRNA level was measured using real-time quantitative reverse transcriptionpolymerase chain reaction.RESULTS:We found that SM treatment significantly decreased visceral sensitivity to colorectal distention in this rat model.In treated animals,SM also decreased the relative hypothalamic CRH mRNA expression level to control levels.CONCLUSION:Lower hypothalamic CRH levels may mediate the beneficial effects of SM in this rat irritable bowel syndrome model.

Study on the Seasonal Variation of the Suspended Sediment Distribution and Transportation in the East China Seas Based on SeaWiFS Data

The monthly mean suspended sediment concentration in the upper layer of the East China Seas was derived from the retrieval of the monthly binned SeaWiFS Level 3 data during 1998 to 2006. The seasonal variation and spatial distribution of the suspended sediment concentration in the study area were investigated. It was found that the suspended sediment distribution presents apparent spatial characteristics and seasonal variations, which are mainly affected by the resuspension and transportation of the suspended sediment in the study area. The concentration of suspended sediment is high inshore and low offshore, and river mouths are generally high concentration areas. The suspended sediment covers a much wider area in winter than in summer, and for the same site the concentration is generally higher in winter. In the Yellow and East China Seas the suspended sediment spreads farther to the open sea in winter than in summer, and May and October are the transitional periods of the extension. Winds, waves, currents, thermocline, halocline, pycnocline as well as bottom sediment feature and distribution in the study area are important influencing factors for the distribution pattern. If the 10rag L^-1 contour line is taken as an indicator, it appears that the transportation of suspended sediment can hardly reach 124^o00＇E in summer or 126^o00＇E in winter, which is due to the obstruction of the Taiwan Warm Current and the Kuroshio Current in the southern Yellow Sea and the East China Sea.

Shake table tests of suspended ceilings to simulate the observed damage in the M_s 7.0 Lushan earthquake, China

Severe damage to suspended ceilings of metal grids and lay-in panels was observed in public buildings during the 2013 M7.0 Lushan earthquake in China. Over the past several years, suspended ceilings have been widely used practice in public buildings throughout China, including government offices, schools and hospitals. To investigate the damage mechanism of suspended ceilings, a series of three-dimensional shake table tests was conducted to reproduce the observed damage. A full-scale reinforced concrete frame was constructed as the testing frame for the ceiling, which was single-story and infilled with brick masonry walls to represent the local construction of low-rise buildings. In general, the ceiling in the tests exhibited similar damage phenomena as the field observations, such as higher vulnerability of perimeter elements and extensive damage to the cross runners. However, it exhibited lower fragility in terms of peak ground/roof accelerations at the initiation of damage. Further investigations are needed to clarify the reasons for this behavior.

Chemical and Isotopic Characteristics of the Water and Suspended Particulate Materials in the Yangtze River and Their Geological and Environmental Implications

The chemical and isotopic characteristics of the water and suspended particulate materials（SPM） in the Yangtze River were investigated on the samples collected from 25 hydrological monitoring stations in the mainsteam and 13 hydrological monitoring stations in the major tributaries during 2003 to 2007. The water samples show a large variation in both δD（ 30‰ to 112‰） and δ18O（ 3.8‰ to 15.4‰） values. Both δD and δ18O values show a decrease from the river head to the Jinsha Jiang section and then increase downstream to the river mouth. It is found that the oxygen and hydrogen isotopic compositions of the Yangtze water are controlled by meteoric precipitation, evaporation, ice（and snow） melting and dam building. The Yangtze SPM concentrations show a large variation and are well corresponded to the spatial and temporal changes of flow speed, runoff and SPM supply, which are affected by the slope of the river bed, local precipitation rate, weathering intensity, erosion condition and anthropogenic activity. The Yangtze SPM consists of clay minerals, clastic silicate and carbonate minerals, heavy minerals, iron hydroxide and organic compounds. From the upper to lower reaches, the clay and clastic silicate components in SPM increase gradually, but the carbonate components decrease gradually, which may reflect changes of climate and weathering intensity in the drainage area. Compared to those of the upper crust rocks, the Yangtze SPM has lower contents of SiO2, CaO, K2 O and Na2 O and higher contents of TFe2 O3 and trace metals of Co, Ni, Cu, Zn, Pb and Cd. The ΣREE in the Yangtze SPM is also slightly higher than that of the upper crust. From the upper to lower reaches, the CaO and MgO contents in SPM decrease gradually, but the SiO2 content increases gradually, corresponding to the increase of clay minerals and decrease of the carbonates. The δ30SiSPM values（ 1.1‰ to 0.3‰） of the Yangtze SPM are similar to those of the average shale, but lower than those of the granite rocks（ 0.3‰ to 0.3‰）, reflecting the effect of silicon isotope fractionation in silicate weathering process. The δ30SiSPM values of the Yangtze SPM show a decreasing trend from the upper to the middle and lower reaches, responding to the variation of the clay content. The major anions of the river water are HCO 3, SO 4 2, Cl, NO 3, SiO 4 4 and F and the major cations include Ca2＋, Na＋, Mg2＋, K＋ and Sr2＋. The good correlation between HCO3-content and the content of Ca2＋may suggest that carbonate dissolution is the dominate contributor to the total dissolved solid（TDS） of the Yangtze River. Very good correlations are also found among contents of Cl, SO4 2, Na＋, Mg2＋, K＋and Sr2＋, indicating the important contribution of evaporite dissolution to the TDS of the Yangtze River. High TDS contents are generally found in the head water, reflecting a strong effect of evaporation in the Qinghai-Tibet Plateau. A small increase of the TDS is generally observed in the river mouth, indicating the influence of tidal intrusion. The F and NO3 contents show a clear increase trend from the upstream to downstream, reflecting the contribution of pesticides and fertilizers in the Chuan Jiang section and the middle and lower reaches. The DSi shows a decrease trend from the upstream to downstream, reflecting the effect of rice and grass growth along the Chuan Jiang section and the middle and lower reaches. The dissolved Cu, Zn and Cd in the Yangtze water are all higher than those in world large rivers, reflecting the effect of intensive mining activity along the Yangtze drainage area. The Yangtze water generally shows similar REE distribution pattern to the global shale. The δ30SiDiss values of the dissolved silicon vary from 0.5‰ to 3.7‰, which is the highest among those of the rivers studied. The δ30SiDiss values of the water in the Yangtze mainsteam show an increase trend from the upper stream to downstream. Its DSi and δ30SiDiss are influenced by multiple processes, such as weathering process, phytolith growth in plants, evaporation, phytolith dissolution, growth of fresh water diatom, adsorption and desorption of aqueous monosilicic acid on iron oxide, precipitation of silcretes and formation of clays coatings in aquifers, and human activity. The δ34SSO4 values of the Yangtze water range from 1.7‰ to 9.0‰. The SO4 in the Yangtze water are mainly from the SO4 in meteoric water, the dissolved sulfate from evaporite, and oxidation of sulfide in rocks, coal and ore deposits. The sulfate reduction and precipitation process can also affect the sulfur isotope composition of the Yangtze water. The87Sr/86Sr ratios of the Yangtze water range from 0.70823 to 0.71590, with an average value of 0.71084. The87Sr/86Sr ratio and Sr concentration are primary controlled by mixing of various sources with different87Sr/86Sr ratios and Sr contents, including the limestone, evaporite and the silicate rocks. The atmospheric precipitation and anthropogenic inputs can also contribute some Sr to the river. The δ11B values of the dissolved B in the Yangtze water range from 2.0‰ to 18.3‰, which is affected by multifactors, such as silicate weathering, carbonate weathering, evaporite dissolution, atmospheric deposition, and anthropogenic inputs.

Comparison of the anti-apoptotic effects of 15-and 35-minute suspended moxibustion after focal cerebral ischemia/reperfusion injury

Heat-sensitive suspended moxibustion has a neuroprotective effect against focal cerebral ischemia/reperfusion injury, but the underly- ing mechanisms remain unclear. The duration of heat-sensitive suspended moxibustion （usually from 30 minutes to 1 hour） is longer than traditional suspended moxibustion （usually 15 minutes）. However, the effects of 15- and 35-minute suspended moxibustion in rats with cerebra/ischemia/reperfusion injury are poorly understood. In this study, we performed 15- or 35-minute suspended moxibustion at acupoint Dazhui （GV14） in an adult rat model of focal cerebral ischemia/reperfusion injury. Infarct volume was evaluated with the 2,3,5-triphenyltetrazolium chloride assay. Histopathological changes and neuronal apoptosis at the injury site were assessed by hematoxy- lin-eosin staining and terminal deoxynucleotidyl transferase dUTP nick end labeling assay. Caspase-9 and caspase-3 expression at the in- jury site was detected using immunofluorescent staining. Bax and Bcl-2 expression at the injury site was assessed using western blot assay. In the 35-minute moxibustion group, infarct volume was decreased, neuronal apoptosis was reduced, caspase-9, caspase-3 and Bax expres- sion was lower, and Bcl-2 expression was increased, compared with the 15-minute moxibustion group. Our findings show that 35-minute moxibustion has a greater anti-apoptotic effect than 15-minute moxibustion after focal cerebral ischemia/reperfusion injury.