Equal access to social infrastructures is a fundamental prerequisite for sustainable development,but has long been a great challenge worldwide.Previous studies have primarily focused on the accessibility to social inf...Equal access to social infrastructures is a fundamental prerequisite for sustainable development,but has long been a great challenge worldwide.Previous studies have primarily focused on the accessibility to social infras-tructures in urban areas across various scales,with less attention to rural areas,where inequality can be more severe.Particularly,few have investigated the disparities of accessibility to social infrastructures between urban and rural areas.Here,using the Changsha-Zhuzhou-Xiangtan urban agglomeration,China,as an example,we investigated the inequality of accessibility in both urban and rural areas,and further compared the urban-rural difference.Accessibility was measured by travel time of residents to infrastructures.We selected four types of social infrastructures including supermarkets,bus stops,primary schools,and health care,which were funda-mentally important to both urban and rural residents.We found large disparities in accessibility between urban and rural areas,ranging from 20 min to 2 h.Rural residents had to spend one to two more hours to bus stops than urban residents,and 20 min more to the other three types of infrastructures.Furthermore,accessibility to multiple infrastructures showed greater urban-rural differences.Rural residents in more than half of the towns had no access to any infrastructure within 15 min,while more than 60%of the urban residents could access to all infrastructures within 15 min.Our results revealed quantitative accessibility gap between urban and rural areas and underscored the necessity of social infrastructures planning to address such disparities.展开更多
Cities hold a critical responsibility for achieving the Sustainable Development Goals(SDGs)due to their high population density,extensive resource consumption,and significant economic contributions.To examine the pres...Cities hold a critical responsibility for achieving the Sustainable Development Goals(SDGs)due to their high population density,extensive resource consumption,and significant economic contributions.To examine the present state of understandings regarding urban sustainability(SDG 11:Sustainable Cities and Communities)within Chinese research communities,this study collected 15950 papers from 1994 to 2022 on the 12 indicators of SDG 11,from the China National Knowledge Infrastructure(CNKI),a hub of Chinese academic papers,that directly relate to policymaking.Significant research topics on SDG 11 were identified for each indicator using bibliometrics analysis approaches.The high-frequency keywords and clusters of keywords over the last three decades reveal that existing studies primarily concentrated on the physical aspects,such as transportation and environment,while there is a lack of consideration of societal aspects.This indicates a limited and biased understanding of the urban sustainability within the Chinese academic community.Hence,it is crucial to prioritize the societal aspects in order to develop a research agenda that further advances urban sustainability.展开更多
The demand for lithium-ion batteries(LIBs)is driven largely by their use in electric vehicles,which is projected to increase dramatically in the future.This great success,however,urgently calls for the efficient recyc...The demand for lithium-ion batteries(LIBs)is driven largely by their use in electric vehicles,which is projected to increase dramatically in the future.This great success,however,urgently calls for the efficient recycling of LIBs at the end of their life.Herein,we describe a froth flotation-based process to recycle graphite—the predominant active material for the negative electrode—from spent LIBs and investigate its reuse in newly assembled LIBs.It has been found that the structure and morphology of the recycled graphite are essentially unchanged compared to pristine commercial anode-grade graphite,and despite some minor impurities from the recycling process,the recycled graphite provides a remarkable reversible specific capacity of more than 350 mAh g^(−1).Even more importantly,newly assembled graphite‖NMC532 cells show excellent cycling stability with a capacity retention of 80%after 1000 cycles,that is,comparable to the performance of reference full cells comprising pristine commercial graphite.展开更多
Grinding,a critical precision machining process for difficult-to-cut alloys,has undergone continual technological advancements to improve machining efficiency.However,the sustainability of this process is gaining heig...Grinding,a critical precision machining process for difficult-to-cut alloys,has undergone continual technological advancements to improve machining efficiency.However,the sustainability of this process is gaining heightened attention due to significant challenges associated with the substantial specific grinding energy and the extensive heat generated when working with difficult-to-cut alloys,renowned for their exceptional physical and mechanical properties.In response to these challenges,the widespread application of massive coolant in manufacturing industries to dissipate grinding heat has led to complex post-cleaning and disposal processes.This,in turn,has resulted in issues such as large energy consumption,a considerable carbon footprint,and concerns related to worker health and safety,which have become the main factors that restrict the development of grinding technology.This paper provides a holistic review of sustainability in grinding difficult-to-cut alloys,encompassing current trends and future directions.The examination extends to developing grinding technologies explicitly tailored for these alloys,comprehensively evaluating their sustainability performance.Additionally,the exploration delves into innovative sustainable technologies,such as heat pipe/oscillating heat pipe grinding wheels,minimum quantity lubrication,cryogenic cooling,and others.These groundbreaking technologies aim to reduce dependence on hazardous coolants,minimizing energy and resource consumption and carbon emissions associated with coolant-related or subsequent disposal processes.The essence of these technologies lies in their potential to revolutionize traditional grinding practices,presenting environmentally friendly alternatives.Finally,future development trends and research directions are put forward to pursue the current limitation of sustainable grinding for difficult-to-cut alloys.This paper can guide future research and development efforts toward more environmentally friendly grinding operations by understanding the current state of sustainable grinding and identifying emerging trends.展开更多
Integrated water and fertilizer management is important for promoting sustainable development of facility agriculture,and biochar plays an important role in guaranteeing food production,as well as alleviating water sh...Integrated water and fertilizer management is important for promoting sustainable development of facility agriculture,and biochar plays an important role in guaranteeing food production,as well as alleviating water shortages and the overuse of fertilizers.The field experiment had twelve treatments and a control(CK)trial including two irrigation amounts(I1,100%ETm;I2,60%ETm;where ETm is the maximum evapotranspiration),two nitrogen applications(N1,360 kg ha^(−1);N2,120 kg ha^(−1))and three biochar application levels(B1,60 t ha^(−1);B_(2),30 t ha^(−1)and B3,0 t ha^(−1)).A multi-objective synergistic irrigation-nitrogen-biochar application system for improving tomato yield,quality,water and nitrogen use efficiency,and greenhouse emissions was developed by integrating the techniques of experimentation and optimization.First,a coupled irrigation-nitrogen-biochar plot experiment was arranged.Then,tomato yield and fruit quality parameters were determined experimentally to establish the response relationships between irrigation-nitrogen-biochar dosage and yield,comprehensive quality of tomatoes(TCQ),irrigation water use efficiency(IWUE),partial factor productivity of nitrogen(PFPN),and net greenhouse gas emissions(NGE).Finally,a multi-objective dynamic optimization regulation model of irrigation-nitrogen-biochar resource allocation at different growth stages of tomato was constructed which was solved by the fuzzy programming method.The results showed that the application of irrigation and nitrogen to biochar promoted increase in yield,IWUE and PFPN,while it had an inhibitory effect on NGE.In addition,the optimal allocation amounts of water and fertilizer were different under different scenarios.The yield of the S1 scenario increased by 8.31%compared to the B_(1)I_(1)N_(2) treatment;TCQ of the S2 scenario increased by 5.14%compared to the B_(2)I_(2)N_(1) treatment;IWUE of the S3 scenario increased by 10.01%compared to the B1I2N2 treatment;PFPN of the S4 scenario increased by 9.35%compared to the B_(1)I_(1)N_(2) treatment;and NGE of the S5 scenario decreased by 11.23%compared to the B_(2)I1N1 treatment.The optimization model showed that the coordination of multiple objectives considering yield,TCQ,IWUE,PFPN,and NGE increased on average from 4.44 to 69.02%compared to each treatment when the irrigation-nitrogen-biochar dosage was 205.18 mm,186 kg ha^(−1)and 43.31 t ha^(−1),respectively.This study provides a guiding basis for the sustainable management of water and fertilizer in greenhouse tomato production under drip irrigation fertilization conditions.展开更多
A series of adsorbent materials(WPU-HAx-y)with a three-dimensional porous structure,green sustainability,and excellent performance were prepared and evaluated for the removal of methylene blue using nontoxic and envir...A series of adsorbent materials(WPU-HAx-y)with a three-dimensional porous structure,green sustainability,and excellent performance were prepared and evaluated for the removal of methylene blue using nontoxic and environmentally friendly waterborne polyurethane as the matrix material and humic acid,a biomass material,as the functional material.The newly synthesized adsorbents were characterized by infrared spectroscopy,scanning electron microscopy,specific surface area,and thermogravimetric.The effects of contact time(0-8 h),starting concentration(10-100 mg·L^(-1)),pH(3-11),solution temperature(30-60℃),and coexisting ions(Ca2+,Na+,K+,Mg2+)on the performance were investigated.Pseudo-first-order,pseudo-second-order,elovich,and intra-particle diffusion models were used to analyze the adsorption kinetics;the Langmuir,Freundlich,Temkin,and Dubin-Radushkovich adsorption isotherms were evaluated;and the adsorption behavior of the adsorbent materials was found to be more appropriate for the pseudo-second-order model for chemical pollutant removal than the Langmuir model,which depends on monolayer adsorption.WPU-HA2-3 stood out with a maximum adsorption capacity of 813.0081 mg·g^(-1) fitted to the pseudo-second-order and 309.2832 mg·g^(-1) fitted to the Langmuir model,showing superior adsorption performance and regenerability.展开更多
The global importance of lithium-ion batteries(LIBs)has been increasingly underscored with the advancement of high-performance energy storage technologies.However,the end-of-life of these batteries poses significant c...The global importance of lithium-ion batteries(LIBs)has been increasingly underscored with the advancement of high-performance energy storage technologies.However,the end-of-life of these batteries poses significant challenges from environmental,economic,and resource management perspectives.This review paper focuses on the pyrometallurgy-based recycling process of lithium-ion batteries,exploring the fundamental understanding of this process and the importance of its optimization.Centering on the high energy consumption and emission gas issues of the pyrometallurgical recycling process,we systematically analyzed the capital-intensive nature of this process and the resulting technological characteristics.Furthermore,we conducted an in-depth discussion on the future research directions to overcome the existing technological barriers and limitations.This review will provide valuable insights for researchers and industry stakeholders in the battery recycling field.展开更多
Recycling waste frying oils for the synthesis of flotation reagents presents a promising avenue for sustainable waste management.Moreover,it offers a cost-effective solution for crafting a specialized collector design...Recycling waste frying oils for the synthesis of flotation reagents presents a promising avenue for sustainable waste management.Moreover,it offers a cost-effective solution for crafting a specialized collector designed to efficiently remove carbonates and enhance phosphate enrichment in froth flotation processes.This study focuses on the synthesis of an anionic collector using the saponification reaction of a frying oil sample,subsequently applied to the flotation of calcite and dolomite.To elucidate the adsorption mechanisms of the frying oil collector(FrOC)and sodium oleate,a reference collector,on fluorapatite,calcite,dolomite,and quartz surfaces,comprehensive experiments were conducted,including zeta potential measurements and Fourier transform infrared spectroscopy.Results revealed diverse adsorption affinities of the molecules towards these minerals.To assess the practical performance of the collector,flotation tests were conducted using a natural phosphate ore mixture,employing a BoxBehnken experimental design.Notably,under optimized conditions(pH 9,1000 g/t of FrOC,3.5 min of conditioning,and 6 min of flotation),FrOC exhibited excellent performance,with calcite and dolomite recoveries exceeding 80%,while apatite recovery in the concentrate fraction remained below 10%.This work exemplifies both circular economy practices and the distinctive approach to sustainable mineral processing.展开更多
Magnesium alloys have many advantages as lightweight materials for engineering applications,especially in the fields of automotive and aerospace.They undergo extensive cutting or machining while making products out of...Magnesium alloys have many advantages as lightweight materials for engineering applications,especially in the fields of automotive and aerospace.They undergo extensive cutting or machining while making products out of them.Dry cutting,a sustainable machining method,causes more friction and adhesion at the tool-chip interface.One of the promising solutions to this problem is cutting tool surface texturing,which can reduce tool wear and friction in dry cutting and improve machining performance.This paper aims to investigate the impact of dimple textures(made on the flank face of cutting inserts)on tool wear and chip morphology in the dry machining of AZ31B magnesium alloy.The results show that the cutting speed was the most significant factor affecting tool flank wear,followed by feed rate and cutting depth.The tool wear mechanism was examined using scanning electron microscope(SEM)images and energy dispersive X-ray spectroscopy(EDS)analysis reports,which showed that at low cutting speed,the main wear mechanism was abrasion,while at high speed,it was adhesion.The chips are discontinuous at low cutting speeds,while continuous at high cutting speeds.The dimple textured flank face cutting tools facilitate the dry machining of AZ31B magnesium alloy and contribute to ecological benefits.展开更多
In response to the rapid increase in world population and subsequent demands for food,edible insects represent an alternative food source for humans that is rich in proteins,amino acids and minerals.Entomophagy is a t...In response to the rapid increase in world population and subsequent demands for food,edible insects represent an alternative food source for humans that is rich in proteins,amino acids and minerals.Entomophagy is a tradition in many countries including China and Thailand,and edible insects have attracted a lot of attention in Western World due to their suitable nutrient composition,high mineral content(e.g.,Fe,Zn,Ca,Mg)and potential use as a supplement in human diet.In this study,we surveyed mineral content in seven insect orders and 67 species of mass produced and wild-harvested edible insects.The total content of essential elements in edible insects was very high in Tenebrio molitor,Bombyx mori,and Zonocerus variegatus.The heavy metal content(summarized for eight species)was below the maximum limit allowed for safe consumption.Sustainable supply of minerals derived from insect biomass is complicated due to the high variations of mineral content in insects and the potential of its change due to processing.展开更多
Rice has a huge impact on socio-economic growth,and ensuring its sustainability and optimal utilization is vital.This review provides an insight into the role of smart farming in enhancing rice productivity.The applic...Rice has a huge impact on socio-economic growth,and ensuring its sustainability and optimal utilization is vital.This review provides an insight into the role of smart farming in enhancing rice productivity.The applications of smart farming in rice production including yield estimation,smart irrigation systems,monitoring disease and growth,and predicting rice quality and classifications are highlighted.The challenges of smart farming in sustainable rice production to enhance the understanding of researchers,policymakers,and stakeholders are discussed.Numerous efforts have been exerted to combat the issues in rice production in order to promote rice sector development.The effective implementation of smart farming in rice production has been facilitated by various technical advancements,particularly the integration of the Internet of Things and artificial intelligence.The future prospects of smart farming in transforming existing rice production practices are also elucidated.Through the utilization of smart farming,the rice industry can attain sustainable and resilient production systems that could mitigate environmental impact and safeguard food security.Thus,the rice industry holds a bright future in transforming current rice production practices into a new outlook in rice smart farming development.展开更多
The global shift toward next-generation energy systems is propelled by the urgent need to combat climate change and the dwindling supply of fossil fuels.This review explores the intricate challenges and opportunities ...The global shift toward next-generation energy systems is propelled by the urgent need to combat climate change and the dwindling supply of fossil fuels.This review explores the intricate challenges and opportunities for transitioning to sustainable renewable energy sources such as solar,wind,and hydrogen.This transition economically challenges traditional energy sectors while fostering new industries,promoting job growth,and sustainable economic development.The transition to renewable energy demands social equity,ensuring universal access to affordable energy,and considering community impact.The environmental benefits include a significant reduction in greenhouse gas emissions and a lesser ecological footprint.This study highlights the rapid growth of the global wind power market,which is projected to increase from$112.23 billion in 2022 to$278.43 billion by 2030,with a compound annual growth rate of 13.67%.In addition,the demand for hydrogen is expected to increase,significantly impacting the market with potential cost reductions and making it a critical renewable energy source owing to its affordability and zero emissions.By 2028,renewables are predicted to account for 42%of global electricity generation,with significant contributions from wind and solar photovoltaic(PV)technology,particularly in China,the European Union,the United States,and India.These developments signify a global commitment to diversifying energy sources,reducing emissions,and moving toward cleaner and more sustainable energy solutions.This review offers stakeholders the insights required to smoothly transition to sustainable energy,setting the stage for a resilient future.展开更多
The proposed study focuses on the critical issue of corrosion,which leads to significant economic losses and safety risks worldwide.A key area of emphasis is the accuracy of corrosion detection methods.While recent st...The proposed study focuses on the critical issue of corrosion,which leads to significant economic losses and safety risks worldwide.A key area of emphasis is the accuracy of corrosion detection methods.While recent studies have made progress,a common challenge is the low accuracy of existing detection models.These models often struggle to reliably identify corrosion tendencies,which are crucial for minimizing industrial risks and optimizing resource use.The proposed study introduces an innovative approach that significantly improves the accuracy of corrosion detection using a convolutional neural network(CNN),as well as two pretrained models,namely YOLOv8 and EfficientNetB0.By leveraging advanced technologies and methodologies,we have achieved high accuracies in identifying and managing the hazards associated with corrosion across various industrial settings.This advancement not only supports the overarching goals of enhancing safety and efficiency,but also sets a new benchmark for future research in the field.The results demonstrate a significant improvement in the ability to detect and mitigate corrosion-related concerns,providing a more accurate and comprehensive solution for industries facing these challenges.Both CNN and EfficientNetB0 exhibited 100%accuracy,precision,recall,and F1-score,followed by YOLOv8 with respective metrics of 95%,100%,90%,and 94.74%.Our approach outperformed state-of-the-art with similar datasets and methodologies.展开更多
Understanding stakeholders’differences in perceptions of ecosystem services(ES)is crucial for guiding ecolog-ical conservation and planning.However,the variations of ES perception amongst different types of residents...Understanding stakeholders’differences in perceptions of ecosystem services(ES)is crucial for guiding ecolog-ical conservation and planning.However,the variations of ES perception amongst different types of residents in urbanizing areas along an urban-rural gradient are still poorly understood.Combining a questionnaire-based survey,redundancy analysis,and statistical tests,we delineated the urban-rural gradient according to local res-idents’socio-economic characteristics,and investigated the differences in local residents’perceptions of ES and potential factors affecting them in the Guanting Reservoir basin,a rapidly urbanizing basin in China.The results showed that residents living in urban-rural transitional areas attached great importance to provisioning services of providing food and domestic water,regulating services of carbon sequestration and air purification,and cul-tural services of providing education and training,which were 0.7%-13.1%,0.7%-9.1%and 2.5%-21.2%higher than that of residents in other areas,respectively.Age and occupation were major factors affecting residents’perceptions.In terms of land-use types that deliver ES,the difference in perceptions of ES delivered by grassland was the greatest amongst residents.Our results support recommendations for policymakers to take into account the stakeholders’diverse perceptions,thus promoting residents’sense of gain on ES.展开更多
BACKGROUND More and more evidence-based practices are emerging,but researchers mostly focus on short-term effects,resulting in evidence-based practices not being applied in the clinic in the long term.In this study,we...BACKGROUND More and more evidence-based practices are emerging,but researchers mostly focus on short-term effects,resulting in evidence-based practices not being applied in the clinic in the long term.In this study,we took the evidence-based practice of perioperative airway management in elderly fracture patients as an example and adopted a descriptive phenomenological approach to understand the influencing factors of its sustainability to provide a reference basis for promoting the continuity of evidence-based practice in the clinic.AIM To explore factors influencing the persistence of evidence-based practice in perioperative airway management in elderly patients with fractures.METHODS This study was qualitative research.Nine nurses who implemented evidencebased practice in the orthopedic ward of a tertiary comprehensive hospital in Shanghai from September 2023 to October 2023 were selected using purposive sampling as research subjects.Semi-structured interviews were conducted with them,and the data were analyzed using the Colaizzi phenomenological analysis method based on the three dimensions and ten factors of the NHS sustainability model.RESULTS Three main themes and ten subthemes were identified:Process aspects(benefits to patients,benefits to nurses,lack of follow-up,complex processes);staff aspects(insufficient human resources,inadequate training and education,lack of leadership support);and organizational environment aspects(inadequate infrastructure,poor patient compliance,poor doctor cooperation).CONCLUSION Human resources,training and education,leadership support,infrastructure,and patient-physician collaboration are important factors influencing the sustainability of evidence-based practice for perioperative airway management in older patients with fractures.展开更多
The patterns of material accumulation in buildings and infrastructure accompanied by rapid urbanization offer an important,yet hitherto largely missing stock perspective for facilitating urban system engineering and i...The patterns of material accumulation in buildings and infrastructure accompanied by rapid urbanization offer an important,yet hitherto largely missing stock perspective for facilitating urban system engineering and informing urban resources,waste,and climate strategies.However,our existing knowledge on the patterns of built environment stocks across and particularly within cities is limited,largely owing to the lack of sufficient high spatial resolution data.This study leveraged multi-source big geodata,machine learning,and bottom-up stock accounting to characterize the built environment stocks of 50 cities in China at 500 m fine-grained levels.The per capita built environment stock of many cities(261 tonnes per capita on average)is close to that in western cities,despite considerable disparities across cities owing to their varying socioeconomic,geomorphology,and urban form characteristics.This is mainly owing to the construction boom and the building and infrastructure-driven economy of China in the past decades.China’s urban expansion tends to be more“vertical”(with high-rise buildings)than“horizontal”(with expanded road networks).It trades skylines for space,and reflects a concentration-dispersion-concentration pathway for spatialized built environment stocks development within cities in China.These results shed light on future urbanization in developing cities,inform spatial planning,and support circular and low-carbon transitions in cities.展开更多
In crop plants, various environmental stresses affect the balance of carbon, nitrogen, and phosphorus(C:N:P), leading to biochemical and physiological alterations and reductions in yield. Silicon(Si) is a beneficial e...In crop plants, various environmental stresses affect the balance of carbon, nitrogen, and phosphorus(C:N:P), leading to biochemical and physiological alterations and reductions in yield. Silicon(Si) is a beneficial element that alleviates plant stress. Most studies involving silicon have focused on physiological responses, such as improvements in photosynthetic processes, water use efficiency, and antioxidant defense systems. But recent research suggests that stressed plants facing either limited or excessive resources(water, light, nutrients, and toxic elements), strategically employ Si to maintain C:N:P homeostasis, thereby minimizing biomass losses. Understanding the role of Si in mitigating the impact of abiotic stresses on plants by regulating C:N:P homeostasis holds great potential for advancing sustainable agricultural practices in crop production. This review presents recent advances in characterizing the influence of environmental stresses on C:N:P homeostasis, as well as the role of Si in preserving C:N:P equilibrium and attenuating biological damage associated with abiotic stress. It underscores the beneficial effects of Si in sustaining C:N:P homeostasis and increasing yield via improved nutritional efficiency and stress mitigation.展开更多
High-density brines have been recognized beneficial for oilfield applications,with various key areas such as drilling,completion and formation evaluation.High-density brines can play a critical role in the development...High-density brines have been recognized beneficial for oilfield applications,with various key areas such as drilling,completion and formation evaluation.High-density brines can play a critical role in the development and production of oil and gas reservoirs during the primary,secondary,and tertiary recovery phases.High-density brines can enhance the mobility and recovery of the oil in the reservoir by controlling the density and viscosity.However,a less attention has been given to the application of high-density brine in the area of reservoir development.This review is shedding light on a concise overview of reservoir development stages in association with the recovery mechanisms.In addition,most possible applications of high-density fluids have also been reviewed in the field of the reservoir development.In summary,this review state that high-density brines can be used to stimulate reservoirs by hydraulic fracturing during the primary recovery phase.However,the risk of increased interfacial tension,which relies on the density difference of two fluids,can trap more residual oil relative to conventional water flooding.In addition,high-density brines are effective in decreasing the mobility ratio and facilitating favorable displacement during polymer flooding.However,they can be least effective in alkaline flooding due to the high IFT related to large density differences.Thus,it is suggested to consider the utilization of sustainable high-density brines by taking into account effective factors in petroleum engineering aspects such as stimulation,secondary recovery and polymer flooding.展开更多
Several actions from both the environmental and human viewpoints have already been made to meet the sustainability goals targeted at food systems.Still,new place-based ideas to improve sustainability are needed.Agroec...Several actions from both the environmental and human viewpoints have already been made to meet the sustainability goals targeted at food systems.Still,new place-based ideas to improve sustainability are needed.Agroecological symbiosis(AES),a novel food system model,is an example of a suggested system-level change to attain sustainability targets;it is a symbiosis of food production and processing using renewable energy that uses its own feedstock.AES has already been found advantageous from the ecological and biophysical viewpoints,but a regional economic evaluation of the model is still lacking.Thus,the aim of our paper is to assess the regional economic impact of a possible systemic change in the food system using the network of agroecological symbiosis(NAES)as an example.We applied scenarios representing different ways of moving towards envisioned NAES models in Mäntsälä,Finland,and a computable general equilibrium model to evaluate the regional economic impact.According to our results,both regional economy and employment would increase,and the regional production base would diversify with NAES implementation applied to the region,but the extent of the benefits varies between scenarios.The scenario that includes change in both public and private food demand,production of bioenergy and utilization of by-products would cause the largest impacts.However,realizing NAES requires investments that may influence the actual implementation of such models.Nonetheless,a change towards NAES can promote an economically and spatially just transition to sustainability,as NAES seems to be economically most beneficial for rural areas.展开更多
Steep-slope cropland plays a vital role in food production,economic development,ecosystem diversity,and Eu-ropean cultural heritage.However,these systems are susceptible to extreme weather events.The 2022 summer droug...Steep-slope cropland plays a vital role in food production,economic development,ecosystem diversity,and Eu-ropean cultural heritage.However,these systems are susceptible to extreme weather events.The 2022 summer drought significantly impacted European agriculture,but the specific effects on steep-slope crops remain uncer-tain.Clarifying this is essential for comprehending similar future events and for implementing effective water management strategies to ensure the sustainability of steep-slope agriculture and associated ecosystem services.This study quantitatively analyzes the spatial distribution of twelve major European steep-slope(>12%)crops and assesses agricultural drought severity during the 2022 events using open-access spatial data.The satellite-based Vegetation Health Index(VHI)is utilized to identify critical hotspots.Results show that olive grove is the most widespread crop in steep slope agriculture(34%of total area),followed by wheat(24%),maize(16%),and vineyard(11%).Almost half of the steep-slope agriculture in Europe suffered drought during summer 2022.Vineyards were hardest affected at 79%,primarily in northern Portugal,northern Spain,southern France,and central Italy.Sunflowers followed at 62%,mainly in Spain,central Italy,southern France,and northern Roma-nia.Olive groves ranked third at 59%,with the most impact in northern Portugal,southern and central Spain,and southern Italy.Maize was also significantly affected at 54%.In this paper,we therefore highlight the need to increase steep-slope agriculture resilience by improving water management and promoting sustainable land practices.展开更多
基金supported by funding from the National Natural Science Foundation of China(Grant No.U21A2010)the National Science Fund for Distinguished Young Scholars(Grant No.42225104)the National Key Research and Development Program(Grant No.2022YFF130110O).
文摘Equal access to social infrastructures is a fundamental prerequisite for sustainable development,but has long been a great challenge worldwide.Previous studies have primarily focused on the accessibility to social infras-tructures in urban areas across various scales,with less attention to rural areas,where inequality can be more severe.Particularly,few have investigated the disparities of accessibility to social infrastructures between urban and rural areas.Here,using the Changsha-Zhuzhou-Xiangtan urban agglomeration,China,as an example,we investigated the inequality of accessibility in both urban and rural areas,and further compared the urban-rural difference.Accessibility was measured by travel time of residents to infrastructures.We selected four types of social infrastructures including supermarkets,bus stops,primary schools,and health care,which were funda-mentally important to both urban and rural residents.We found large disparities in accessibility between urban and rural areas,ranging from 20 min to 2 h.Rural residents had to spend one to two more hours to bus stops than urban residents,and 20 min more to the other three types of infrastructures.Furthermore,accessibility to multiple infrastructures showed greater urban-rural differences.Rural residents in more than half of the towns had no access to any infrastructure within 15 min,while more than 60%of the urban residents could access to all infrastructures within 15 min.Our results revealed quantitative accessibility gap between urban and rural areas and underscored the necessity of social infrastructures planning to address such disparities.
基金National Natural Science Foundation of China(No.42171449)。
文摘Cities hold a critical responsibility for achieving the Sustainable Development Goals(SDGs)due to their high population density,extensive resource consumption,and significant economic contributions.To examine the present state of understandings regarding urban sustainability(SDG 11:Sustainable Cities and Communities)within Chinese research communities,this study collected 15950 papers from 1994 to 2022 on the 12 indicators of SDG 11,from the China National Knowledge Infrastructure(CNKI),a hub of Chinese academic papers,that directly relate to policymaking.Significant research topics on SDG 11 were identified for each indicator using bibliometrics analysis approaches.The high-frequency keywords and clusters of keywords over the last three decades reveal that existing studies primarily concentrated on the physical aspects,such as transportation and environment,while there is a lack of consideration of societal aspects.This indicates a limited and biased understanding of the urban sustainability within the Chinese academic community.Hence,it is crucial to prioritize the societal aspects in order to develop a research agenda that further advances urban sustainability.
基金Bundesministerium für Bildung und Forschung,Grant/Award Numbers:03XP0138C,03XP0306C。
文摘The demand for lithium-ion batteries(LIBs)is driven largely by their use in electric vehicles,which is projected to increase dramatically in the future.This great success,however,urgently calls for the efficient recycling of LIBs at the end of their life.Herein,we describe a froth flotation-based process to recycle graphite—the predominant active material for the negative electrode—from spent LIBs and investigate its reuse in newly assembled LIBs.It has been found that the structure and morphology of the recycled graphite are essentially unchanged compared to pristine commercial anode-grade graphite,and despite some minor impurities from the recycling process,the recycled graphite provides a remarkable reversible specific capacity of more than 350 mAh g^(−1).Even more importantly,newly assembled graphite‖NMC532 cells show excellent cycling stability with a capacity retention of 80%after 1000 cycles,that is,comparable to the performance of reference full cells comprising pristine commercial graphite.
基金Supported by National Natural Science Foundation of China(Nos.52205476,92160301)Youth Talent Support Project of Jiangsu Provincial Association of Science and Technology of China(Grant No.TJ-2023-070)+2 种基金Science Center for Gas Turbine Project(Grant No.P2023-B-IV-003-001)Fund of Prospective Layout of Scientific Research for the Nanjing University of Aeronautics and Astronautics of China(Grant No.1005-ILB23025-1A)Fund of Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology of China(Grant No.1005-ZAA20003-14).
文摘Grinding,a critical precision machining process for difficult-to-cut alloys,has undergone continual technological advancements to improve machining efficiency.However,the sustainability of this process is gaining heightened attention due to significant challenges associated with the substantial specific grinding energy and the extensive heat generated when working with difficult-to-cut alloys,renowned for their exceptional physical and mechanical properties.In response to these challenges,the widespread application of massive coolant in manufacturing industries to dissipate grinding heat has led to complex post-cleaning and disposal processes.This,in turn,has resulted in issues such as large energy consumption,a considerable carbon footprint,and concerns related to worker health and safety,which have become the main factors that restrict the development of grinding technology.This paper provides a holistic review of sustainability in grinding difficult-to-cut alloys,encompassing current trends and future directions.The examination extends to developing grinding technologies explicitly tailored for these alloys,comprehensively evaluating their sustainability performance.Additionally,the exploration delves into innovative sustainable technologies,such as heat pipe/oscillating heat pipe grinding wheels,minimum quantity lubrication,cryogenic cooling,and others.These groundbreaking technologies aim to reduce dependence on hazardous coolants,minimizing energy and resource consumption and carbon emissions associated with coolant-related or subsequent disposal processes.The essence of these technologies lies in their potential to revolutionize traditional grinding practices,presenting environmentally friendly alternatives.Finally,future development trends and research directions are put forward to pursue the current limitation of sustainable grinding for difficult-to-cut alloys.This paper can guide future research and development efforts toward more environmentally friendly grinding operations by understanding the current state of sustainable grinding and identifying emerging trends.
基金supported by the National Natural Science Foundation of China(52222902 and 52079029)。
文摘Integrated water and fertilizer management is important for promoting sustainable development of facility agriculture,and biochar plays an important role in guaranteeing food production,as well as alleviating water shortages and the overuse of fertilizers.The field experiment had twelve treatments and a control(CK)trial including two irrigation amounts(I1,100%ETm;I2,60%ETm;where ETm is the maximum evapotranspiration),two nitrogen applications(N1,360 kg ha^(−1);N2,120 kg ha^(−1))and three biochar application levels(B1,60 t ha^(−1);B_(2),30 t ha^(−1)and B3,0 t ha^(−1)).A multi-objective synergistic irrigation-nitrogen-biochar application system for improving tomato yield,quality,water and nitrogen use efficiency,and greenhouse emissions was developed by integrating the techniques of experimentation and optimization.First,a coupled irrigation-nitrogen-biochar plot experiment was arranged.Then,tomato yield and fruit quality parameters were determined experimentally to establish the response relationships between irrigation-nitrogen-biochar dosage and yield,comprehensive quality of tomatoes(TCQ),irrigation water use efficiency(IWUE),partial factor productivity of nitrogen(PFPN),and net greenhouse gas emissions(NGE).Finally,a multi-objective dynamic optimization regulation model of irrigation-nitrogen-biochar resource allocation at different growth stages of tomato was constructed which was solved by the fuzzy programming method.The results showed that the application of irrigation and nitrogen to biochar promoted increase in yield,IWUE and PFPN,while it had an inhibitory effect on NGE.In addition,the optimal allocation amounts of water and fertilizer were different under different scenarios.The yield of the S1 scenario increased by 8.31%compared to the B_(1)I_(1)N_(2) treatment;TCQ of the S2 scenario increased by 5.14%compared to the B_(2)I_(2)N_(1) treatment;IWUE of the S3 scenario increased by 10.01%compared to the B1I2N2 treatment;PFPN of the S4 scenario increased by 9.35%compared to the B_(1)I_(1)N_(2) treatment;and NGE of the S5 scenario decreased by 11.23%compared to the B_(2)I1N1 treatment.The optimization model showed that the coordination of multiple objectives considering yield,TCQ,IWUE,PFPN,and NGE increased on average from 4.44 to 69.02%compared to each treatment when the irrigation-nitrogen-biochar dosage was 205.18 mm,186 kg ha^(−1)and 43.31 t ha^(−1),respectively.This study provides a guiding basis for the sustainable management of water and fertilizer in greenhouse tomato production under drip irrigation fertilization conditions.
基金supported by the National Natural Science Foundation of China(21704047)the Natural Science Foundation of Shandong Province(ZR2017BB078,ZR2021QE137)+1 种基金the Foundation of State Key Laboratory of Biobased Material and Green Papermaking(ZZ20190407)the Major scientific and technological innovation projects of Shandong Province(2019JZZY020230).
文摘A series of adsorbent materials(WPU-HAx-y)with a three-dimensional porous structure,green sustainability,and excellent performance were prepared and evaluated for the removal of methylene blue using nontoxic and environmentally friendly waterborne polyurethane as the matrix material and humic acid,a biomass material,as the functional material.The newly synthesized adsorbents were characterized by infrared spectroscopy,scanning electron microscopy,specific surface area,and thermogravimetric.The effects of contact time(0-8 h),starting concentration(10-100 mg·L^(-1)),pH(3-11),solution temperature(30-60℃),and coexisting ions(Ca2+,Na+,K+,Mg2+)on the performance were investigated.Pseudo-first-order,pseudo-second-order,elovich,and intra-particle diffusion models were used to analyze the adsorption kinetics;the Langmuir,Freundlich,Temkin,and Dubin-Radushkovich adsorption isotherms were evaluated;and the adsorption behavior of the adsorbent materials was found to be more appropriate for the pseudo-second-order model for chemical pollutant removal than the Langmuir model,which depends on monolayer adsorption.WPU-HA2-3 stood out with a maximum adsorption capacity of 813.0081 mg·g^(-1) fitted to the pseudo-second-order and 309.2832 mg·g^(-1) fitted to the Langmuir model,showing superior adsorption performance and regenerability.
基金the Technology Innovation Program(or Industrial Strategic Technology Development Program)and the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.20022950)。
文摘The global importance of lithium-ion batteries(LIBs)has been increasingly underscored with the advancement of high-performance energy storage technologies.However,the end-of-life of these batteries poses significant challenges from environmental,economic,and resource management perspectives.This review paper focuses on the pyrometallurgy-based recycling process of lithium-ion batteries,exploring the fundamental understanding of this process and the importance of its optimization.Centering on the high energy consumption and emission gas issues of the pyrometallurgical recycling process,we systematically analyzed the capital-intensive nature of this process and the resulting technological characteristics.Furthermore,we conducted an in-depth discussion on the future research directions to overcome the existing technological barriers and limitations.This review will provide valuable insights for researchers and industry stakeholders in the battery recycling field.
基金financially supported through the research program between OCP Group and UM6P under the specific agreement AS34-flotation project
文摘Recycling waste frying oils for the synthesis of flotation reagents presents a promising avenue for sustainable waste management.Moreover,it offers a cost-effective solution for crafting a specialized collector designed to efficiently remove carbonates and enhance phosphate enrichment in froth flotation processes.This study focuses on the synthesis of an anionic collector using the saponification reaction of a frying oil sample,subsequently applied to the flotation of calcite and dolomite.To elucidate the adsorption mechanisms of the frying oil collector(FrOC)and sodium oleate,a reference collector,on fluorapatite,calcite,dolomite,and quartz surfaces,comprehensive experiments were conducted,including zeta potential measurements and Fourier transform infrared spectroscopy.Results revealed diverse adsorption affinities of the molecules towards these minerals.To assess the practical performance of the collector,flotation tests were conducted using a natural phosphate ore mixture,employing a BoxBehnken experimental design.Notably,under optimized conditions(pH 9,1000 g/t of FrOC,3.5 min of conditioning,and 6 min of flotation),FrOC exhibited excellent performance,with calcite and dolomite recoveries exceeding 80%,while apatite recovery in the concentrate fraction remained below 10%.This work exemplifies both circular economy practices and the distinctive approach to sustainable mineral processing.
文摘Magnesium alloys have many advantages as lightweight materials for engineering applications,especially in the fields of automotive and aerospace.They undergo extensive cutting or machining while making products out of them.Dry cutting,a sustainable machining method,causes more friction and adhesion at the tool-chip interface.One of the promising solutions to this problem is cutting tool surface texturing,which can reduce tool wear and friction in dry cutting and improve machining performance.This paper aims to investigate the impact of dimple textures(made on the flank face of cutting inserts)on tool wear and chip morphology in the dry machining of AZ31B magnesium alloy.The results show that the cutting speed was the most significant factor affecting tool flank wear,followed by feed rate and cutting depth.The tool wear mechanism was examined using scanning electron microscope(SEM)images and energy dispersive X-ray spectroscopy(EDS)analysis reports,which showed that at low cutting speed,the main wear mechanism was abrasion,while at high speed,it was adhesion.The chips are discontinuous at low cutting speeds,while continuous at high cutting speeds.The dimple textured flank face cutting tools facilitate the dry machining of AZ31B magnesium alloy and contribute to ecological benefits.
基金founded by Jiangsu Agricultural Science and Technology Innovation Fund(CX(20)3179)Dongminghuanghetan Ecological Agriculture Co.,Ltd(204032897)+1 种基金partially funded funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no.861976,project SUSINCHAINthe German Federal Ministry of Education and Research(BMBF),in the frame of FACCE-SURPLUS/FACCE-JPI project UpWaste,grant number 031B0934A。
文摘In response to the rapid increase in world population and subsequent demands for food,edible insects represent an alternative food source for humans that is rich in proteins,amino acids and minerals.Entomophagy is a tradition in many countries including China and Thailand,and edible insects have attracted a lot of attention in Western World due to their suitable nutrient composition,high mineral content(e.g.,Fe,Zn,Ca,Mg)and potential use as a supplement in human diet.In this study,we surveyed mineral content in seven insect orders and 67 species of mass produced and wild-harvested edible insects.The total content of essential elements in edible insects was very high in Tenebrio molitor,Bombyx mori,and Zonocerus variegatus.The heavy metal content(summarized for eight species)was below the maximum limit allowed for safe consumption.Sustainable supply of minerals derived from insect biomass is complicated due to the high variations of mineral content in insects and the potential of its change due to processing.
基金The authors wish to acknowledge the Ministry of Higher Education,Malaysia for financial support via the Transdisciplinary Research Grant Scheme Project(Grant No.TRGS/1/2020/UPM/02/7).
文摘Rice has a huge impact on socio-economic growth,and ensuring its sustainability and optimal utilization is vital.This review provides an insight into the role of smart farming in enhancing rice productivity.The applications of smart farming in rice production including yield estimation,smart irrigation systems,monitoring disease and growth,and predicting rice quality and classifications are highlighted.The challenges of smart farming in sustainable rice production to enhance the understanding of researchers,policymakers,and stakeholders are discussed.Numerous efforts have been exerted to combat the issues in rice production in order to promote rice sector development.The effective implementation of smart farming in rice production has been facilitated by various technical advancements,particularly the integration of the Internet of Things and artificial intelligence.The future prospects of smart farming in transforming existing rice production practices are also elucidated.Through the utilization of smart farming,the rice industry can attain sustainable and resilient production systems that could mitigate environmental impact and safeguard food security.Thus,the rice industry holds a bright future in transforming current rice production practices into a new outlook in rice smart farming development.
文摘The global shift toward next-generation energy systems is propelled by the urgent need to combat climate change and the dwindling supply of fossil fuels.This review explores the intricate challenges and opportunities for transitioning to sustainable renewable energy sources such as solar,wind,and hydrogen.This transition economically challenges traditional energy sectors while fostering new industries,promoting job growth,and sustainable economic development.The transition to renewable energy demands social equity,ensuring universal access to affordable energy,and considering community impact.The environmental benefits include a significant reduction in greenhouse gas emissions and a lesser ecological footprint.This study highlights the rapid growth of the global wind power market,which is projected to increase from$112.23 billion in 2022 to$278.43 billion by 2030,with a compound annual growth rate of 13.67%.In addition,the demand for hydrogen is expected to increase,significantly impacting the market with potential cost reductions and making it a critical renewable energy source owing to its affordability and zero emissions.By 2028,renewables are predicted to account for 42%of global electricity generation,with significant contributions from wind and solar photovoltaic(PV)technology,particularly in China,the European Union,the United States,and India.These developments signify a global commitment to diversifying energy sources,reducing emissions,and moving toward cleaner and more sustainable energy solutions.This review offers stakeholders the insights required to smoothly transition to sustainable energy,setting the stage for a resilient future.
文摘The proposed study focuses on the critical issue of corrosion,which leads to significant economic losses and safety risks worldwide.A key area of emphasis is the accuracy of corrosion detection methods.While recent studies have made progress,a common challenge is the low accuracy of existing detection models.These models often struggle to reliably identify corrosion tendencies,which are crucial for minimizing industrial risks and optimizing resource use.The proposed study introduces an innovative approach that significantly improves the accuracy of corrosion detection using a convolutional neural network(CNN),as well as two pretrained models,namely YOLOv8 and EfficientNetB0.By leveraging advanced technologies and methodologies,we have achieved high accuracies in identifying and managing the hazards associated with corrosion across various industrial settings.This advancement not only supports the overarching goals of enhancing safety and efficiency,but also sets a new benchmark for future research in the field.The results demonstrate a significant improvement in the ability to detect and mitigate corrosion-related concerns,providing a more accurate and comprehensive solution for industries facing these challenges.Both CNN and EfficientNetB0 exhibited 100%accuracy,precision,recall,and F1-score,followed by YOLOv8 with respective metrics of 95%,100%,90%,and 94.74%.Our approach outperformed state-of-the-art with similar datasets and methodologies.
基金supported by the National Natural Science Foundation of China(Grant No.42361144859)Beijing Nova Pro-gram(Grant No.20220484163)Beijing Normal University Tang Scholar.
文摘Understanding stakeholders’differences in perceptions of ecosystem services(ES)is crucial for guiding ecolog-ical conservation and planning.However,the variations of ES perception amongst different types of residents in urbanizing areas along an urban-rural gradient are still poorly understood.Combining a questionnaire-based survey,redundancy analysis,and statistical tests,we delineated the urban-rural gradient according to local res-idents’socio-economic characteristics,and investigated the differences in local residents’perceptions of ES and potential factors affecting them in the Guanting Reservoir basin,a rapidly urbanizing basin in China.The results showed that residents living in urban-rural transitional areas attached great importance to provisioning services of providing food and domestic water,regulating services of carbon sequestration and air purification,and cul-tural services of providing education and training,which were 0.7%-13.1%,0.7%-9.1%and 2.5%-21.2%higher than that of residents in other areas,respectively.Age and occupation were major factors affecting residents’perceptions.In terms of land-use types that deliver ES,the difference in perceptions of ES delivered by grassland was the greatest amongst residents.Our results support recommendations for policymakers to take into account the stakeholders’diverse perceptions,thus promoting residents’sense of gain on ES.
基金The study was reviewed and approved by the Ethics Committee of Shanghai Tongren Hospital(Approval Number:Tongren Lun Audit 2022-075-01).
文摘BACKGROUND More and more evidence-based practices are emerging,but researchers mostly focus on short-term effects,resulting in evidence-based practices not being applied in the clinic in the long term.In this study,we took the evidence-based practice of perioperative airway management in elderly fracture patients as an example and adopted a descriptive phenomenological approach to understand the influencing factors of its sustainability to provide a reference basis for promoting the continuity of evidence-based practice in the clinic.AIM To explore factors influencing the persistence of evidence-based practice in perioperative airway management in elderly patients with fractures.METHODS This study was qualitative research.Nine nurses who implemented evidencebased practice in the orthopedic ward of a tertiary comprehensive hospital in Shanghai from September 2023 to October 2023 were selected using purposive sampling as research subjects.Semi-structured interviews were conducted with them,and the data were analyzed using the Colaizzi phenomenological analysis method based on the three dimensions and ten factors of the NHS sustainability model.RESULTS Three main themes and ten subthemes were identified:Process aspects(benefits to patients,benefits to nurses,lack of follow-up,complex processes);staff aspects(insufficient human resources,inadequate training and education,lack of leadership support);and organizational environment aspects(inadequate infrastructure,poor patient compliance,poor doctor cooperation).CONCLUSION Human resources,training and education,leadership support,infrastructure,and patient-physician collaboration are important factors influencing the sustainability of evidence-based practice for perioperative airway management in older patients with fractures.
基金supported by the National Natural Science Foundation of China (71991484,42271471,72088101,and 41830645)Danish Agency for Higher Education and Science (International Network Project,0192-00056B)the Fundamental Research Funds for the Central Universities (Peking University).
文摘The patterns of material accumulation in buildings and infrastructure accompanied by rapid urbanization offer an important,yet hitherto largely missing stock perspective for facilitating urban system engineering and informing urban resources,waste,and climate strategies.However,our existing knowledge on the patterns of built environment stocks across and particularly within cities is limited,largely owing to the lack of sufficient high spatial resolution data.This study leveraged multi-source big geodata,machine learning,and bottom-up stock accounting to characterize the built environment stocks of 50 cities in China at 500 m fine-grained levels.The per capita built environment stock of many cities(261 tonnes per capita on average)is close to that in western cities,despite considerable disparities across cities owing to their varying socioeconomic,geomorphology,and urban form characteristics.This is mainly owing to the construction boom and the building and infrastructure-driven economy of China in the past decades.China’s urban expansion tends to be more“vertical”(with high-rise buildings)than“horizontal”(with expanded road networks).It trades skylines for space,and reflects a concentration-dispersion-concentration pathway for spatialized built environment stocks development within cities in China.These results shed light on future urbanization in developing cities,inform spatial planning,and support circular and low-carbon transitions in cities.
基金The support of the S?o Paulo State University (UNESP)。
文摘In crop plants, various environmental stresses affect the balance of carbon, nitrogen, and phosphorus(C:N:P), leading to biochemical and physiological alterations and reductions in yield. Silicon(Si) is a beneficial element that alleviates plant stress. Most studies involving silicon have focused on physiological responses, such as improvements in photosynthetic processes, water use efficiency, and antioxidant defense systems. But recent research suggests that stressed plants facing either limited or excessive resources(water, light, nutrients, and toxic elements), strategically employ Si to maintain C:N:P homeostasis, thereby minimizing biomass losses. Understanding the role of Si in mitigating the impact of abiotic stresses on plants by regulating C:N:P homeostasis holds great potential for advancing sustainable agricultural practices in crop production. This review presents recent advances in characterizing the influence of environmental stresses on C:N:P homeostasis, as well as the role of Si in preserving C:N:P equilibrium and attenuating biological damage associated with abiotic stress. It underscores the beneficial effects of Si in sustaining C:N:P homeostasis and increasing yield via improved nutritional efficiency and stress mitigation.
基金supported by the King Fahd University of Pe-troleum and Minerals[Grant No.KU201004]Khalifa University[Grant No.KU-KFUPM-2020-28]H2FC2303 DSR Project of KFUPM.
文摘High-density brines have been recognized beneficial for oilfield applications,with various key areas such as drilling,completion and formation evaluation.High-density brines can play a critical role in the development and production of oil and gas reservoirs during the primary,secondary,and tertiary recovery phases.High-density brines can enhance the mobility and recovery of the oil in the reservoir by controlling the density and viscosity.However,a less attention has been given to the application of high-density brine in the area of reservoir development.This review is shedding light on a concise overview of reservoir development stages in association with the recovery mechanisms.In addition,most possible applications of high-density fluids have also been reviewed in the field of the reservoir development.In summary,this review state that high-density brines can be used to stimulate reservoirs by hydraulic fracturing during the primary recovery phase.However,the risk of increased interfacial tension,which relies on the density difference of two fluids,can trap more residual oil relative to conventional water flooding.In addition,high-density brines are effective in decreasing the mobility ratio and facilitating favorable displacement during polymer flooding.However,they can be least effective in alkaline flooding due to the high IFT related to large density differences.Thus,it is suggested to consider the utilization of sustainable high-density brines by taking into account effective factors in petroleum engineering aspects such as stimulation,secondary recovery and polymer flooding.
文摘Several actions from both the environmental and human viewpoints have already been made to meet the sustainability goals targeted at food systems.Still,new place-based ideas to improve sustainability are needed.Agroecological symbiosis(AES),a novel food system model,is an example of a suggested system-level change to attain sustainability targets;it is a symbiosis of food production and processing using renewable energy that uses its own feedstock.AES has already been found advantageous from the ecological and biophysical viewpoints,but a regional economic evaluation of the model is still lacking.Thus,the aim of our paper is to assess the regional economic impact of a possible systemic change in the food system using the network of agroecological symbiosis(NAES)as an example.We applied scenarios representing different ways of moving towards envisioned NAES models in Mäntsälä,Finland,and a computable general equilibrium model to evaluate the regional economic impact.According to our results,both regional economy and employment would increase,and the regional production base would diversify with NAES implementation applied to the region,but the extent of the benefits varies between scenarios.The scenario that includes change in both public and private food demand,production of bioenergy and utilization of by-products would cause the largest impacts.However,realizing NAES requires investments that may influence the actual implementation of such models.Nonetheless,a change towards NAES can promote an economically and spatially just transition to sustainability,as NAES seems to be economically most beneficial for rural areas.
基金funding from the European Union Next-GenerationEU(PIANO NAZIONALE DI RIPRESA E RESILIENZA(PNRR)-MISSIONE 4 COMPONENTE 2,INVESTIMENTO 1.4-D.D.103217/06/2022,CN00000022).
文摘Steep-slope cropland plays a vital role in food production,economic development,ecosystem diversity,and Eu-ropean cultural heritage.However,these systems are susceptible to extreme weather events.The 2022 summer drought significantly impacted European agriculture,but the specific effects on steep-slope crops remain uncer-tain.Clarifying this is essential for comprehending similar future events and for implementing effective water management strategies to ensure the sustainability of steep-slope agriculture and associated ecosystem services.This study quantitatively analyzes the spatial distribution of twelve major European steep-slope(>12%)crops and assesses agricultural drought severity during the 2022 events using open-access spatial data.The satellite-based Vegetation Health Index(VHI)is utilized to identify critical hotspots.Results show that olive grove is the most widespread crop in steep slope agriculture(34%of total area),followed by wheat(24%),maize(16%),and vineyard(11%).Almost half of the steep-slope agriculture in Europe suffered drought during summer 2022.Vineyards were hardest affected at 79%,primarily in northern Portugal,northern Spain,southern France,and central Italy.Sunflowers followed at 62%,mainly in Spain,central Italy,southern France,and northern Roma-nia.Olive groves ranked third at 59%,with the most impact in northern Portugal,southern and central Spain,and southern Italy.Maize was also significantly affected at 54%.In this paper,we therefore highlight the need to increase steep-slope agriculture resilience by improving water management and promoting sustainable land practices.