This paper introduces the principle of space vector pulse width modulation （SVPWM）, and discusses a method for implementing the SVPWM based on MATLAB/SIMULINK, as well as modeling of AC servo system with permanent m...This paper introduces the principle of space vector pulse width modulation （SVPWM）, and discusses a method for implementing the SVPWM based on MATLAB/SIMULINK, as well as modeling of AC servo system with permanent magnet synchronous motor （PMSM）. Simulation results show that the model is effective, and the method provides a frame of reference for software and hardware designs which can be applied in high temperature superconducting （HTS） flywheel energy storage system （FESS） and linear motor （LM）.展开更多
In wind power generation system the grid-connected inverter is an important section for energy conversion and transmission, of which the performance has a direct influence on the entire wind power generation system. T...In wind power generation system the grid-connected inverter is an important section for energy conversion and transmission, of which the performance has a direct influence on the entire wind power generation system. The mathematical model of the grid-connected inverter is deduced firstly. Then, the space vector pulse width modulation （SVPWM） is analyzed. The power factor can be controlled close to unity, leading or lagging, which is realized based on H-type current controller and grid voltage vector-oriented control. The control strategy is verified by the simulation and experimental results with a good sinusoidal current, a small harmonic component and a fast dynamic response.展开更多
In this paper, the feasibility of embedding the direct torque control （DTC） of an induction machine into field programmable gate arrays （FPGA） is investigated. DTC of an induction machine is simulated in a MATLAB/...In this paper, the feasibility of embedding the direct torque control （DTC） of an induction machine into field programmable gate arrays （FPGA） is investigated. DTC of an induction machine is simulated in a MATLAB/Simulink environment using a Xilinx system generator. The resulting design has a flexible and modular structure where the designer can customize the hardware blocks by changing the number of inputs, outputs, and algorithm when it is compared to the designs implemented using classical microcontrollers and digital signal processors. With its flexibility, other control algorithms can easily be programmed and embedded into the FPGA. The above system has been implemented on Xilinx Spartan 3A DSP FPGA controller. Simulation and experimentation have been performed to prove the validity of the proposed methodology.展开更多
基金This workis supported by the Chinese High Technology Development Plan Projectunder Grant No. 2007AA03Z208.
文摘This paper introduces the principle of space vector pulse width modulation （SVPWM）, and discusses a method for implementing the SVPWM based on MATLAB/SIMULINK, as well as modeling of AC servo system with permanent magnet synchronous motor （PMSM）. Simulation results show that the model is effective, and the method provides a frame of reference for software and hardware designs which can be applied in high temperature superconducting （HTS） flywheel energy storage system （FESS） and linear motor （LM）.
基金supported by Delta Power Electronic Science and Education Development in 2007 (Grant No.DRES2007002)
文摘In wind power generation system the grid-connected inverter is an important section for energy conversion and transmission, of which the performance has a direct influence on the entire wind power generation system. The mathematical model of the grid-connected inverter is deduced firstly. Then, the space vector pulse width modulation （SVPWM） is analyzed. The power factor can be controlled close to unity, leading or lagging, which is realized based on H-type current controller and grid voltage vector-oriented control. The control strategy is verified by the simulation and experimental results with a good sinusoidal current, a small harmonic component and a fast dynamic response.
文摘In this paper, the feasibility of embedding the direct torque control （DTC） of an induction machine into field programmable gate arrays （FPGA） is investigated. DTC of an induction machine is simulated in a MATLAB/Simulink environment using a Xilinx system generator. The resulting design has a flexible and modular structure where the designer can customize the hardware blocks by changing the number of inputs, outputs, and algorithm when it is compared to the designs implemented using classical microcontrollers and digital signal processors. With its flexibility, other control algorithms can easily be programmed and embedded into the FPGA. The above system has been implemented on Xilinx Spartan 3A DSP FPGA controller. Simulation and experimentation have been performed to prove the validity of the proposed methodology.
