Robust pre-specified time synchronization of chaotic systems by employing time-varying switching surfaces in the sliding mode control scheme

In the conventional chaos synchronization methods, the time at which two chaotic systems are synchronized, is usually unknown and depends on initial conditions. In this work based on Lyapunov stability theory a sliding mode controller with time-varying switching surfaces is proposed to achieve chaos synchronization at a pre-specified time for the first time. The proposed controller is able to synchronize chaotic systems precisely at any time when we want. Moreover, by choosing the time-varying switching surfaces in a way that the reaching phase is eliminated, the synchronization becomes robust to uncertainties and exogenous disturbances. Simulation results are presented to show the effectiveness of the proposed method of stabilizing and synchronizing chaotic systems with complete robustness to uncertainty and disturbances exactly at a pre-specified time.

A 3.3 kV 4H-SiC split gate MOSFET with a central implant region for superior trade-off between static and switching performance

A split gate MOSFET(SG-MOSFET)is widely known for reducing the reverse transfer capacitance(C_(RSS)).In a 3.3 kV class,the SG-MOSFET does not provide reliable operation due to the high gate oxide electric field.In addition to the poor static performance,the SG-MOSFET has issues such as the punch through and drain-induced barrier lowering(DIBL)caused by the high gate oxide electric field.As such,a 3.3 kV 4 H-SiC split gate MOSFET with a grounded central implant region(SG-CIMOSFET)is proposed to resolve these issues and for achieving a superior trade-off between the static and switching performance.The SG-CIMOSFET has a significantly low on-resistance(R_(ON))and maximum gate oxide field(E_(OX))due to the central implant region.A grounded central implant region significantly reduces the C_(RSS)and gate drain charge(Q_(GD))by partially screening the gate-to-drain capacitive coupling.Compared to a planar MOSFET,the SG MOSFET,central implant MOSFET(CIMOSFET),the SGCIMOSFET improve the R_(ON)×Q_(GD)by 83.7%,72.4%and 44.5%,respectively.The results show that the device features not only the smallest switching energy loss but also the fastest switching time.

H_-/H_∞ fault detection filter design for interval time-varying delays switched systems

The problem of the robust fault detection filter design for time-varying delays switched systems is considered in the framework of mixed H-/H∞. Firstly, the weighted H∞ performance index is utilized as the robustness performance, and the H- index is used as the sensitivity performance for obtaining the robust fault detection filter. Then a novel multiple Lyapunov-Krasovskii function is proposed for deriving sufficient existence conditions of the robust fault detection filter based on the average dwell time technique. By introducing slack matrix variable, the coupling between the Lyapunov matrix and system matrix is removed, and the conservatism of results is reduced. Based on the robust fault detection filter, residual is generated and evaluated for detecting faults. In addition, the results of this paper are dependent on time delays,and represented in the form of linear matrix inequalities. Finally,the simulation example verifies the effectiveness of the proposed method.

High-speed 2 × 2 silicon-based electro-optic switch with nanosecond switch time

A 2 × 2 electro-optic switch is experimentally demonstrated using the optical structure of a Mach-Zehnder interferometer （MZI） based on a submicron rib waveguide and the electrical structure of a PIN diode on silicon-on-insulator （SOI）. The switch behaviour is achieved through the plasma dispersion effect of silicon. The device has a modulation arm of 1 mm in length and cross-section of 400 nm×340 nm. The measurement results show that the switch has a VπLπ figure of merit of 0.145 V.cm and the extinction ratios of two output ports and cross talk are 40 dB, 28 dB and -28 dB, respectively. A 3 dB modulation bandwidth of 90 MHz and a switch time of 6.8 ns for the rise edge and 2.7 ns for the fall edge are also demonstrated.

Polarization fatigue in poly(vinylidene fluoride (78%)-trifluoroethylene (22%)) ferroelectric thin films:a pulse train study

This paper investigates the influences of polarization fatigue on remanent polarization and switching time by pulse train measurements in ferroelectric poly（vinylidene fluoride （78%） and trifluoroethylene （22%）） thin films. Fatigue was carried out by a series of bipolar switching pulses with constant pulse width （on-time） and various interval times between pulses （off-time）. The experimental observations indicated that the off-time period showed no obvious influence on fatigue rate and the switching time increased with the increase of fatigue cycles. The origination of these phenomena was discussed according to the charge injection model.

Experiments and SPICE simulations of double MgO-based perpendicular magnetic tunnel junction

We investigate properties of perpendicular anisotropy magnetic tunnel junctions(pMTJs) with a stack structure MgO/CoFeB/Ta/CoFeB/MgO as the free layer(or recording layer),and obtain the necessary device parameters from the tunneling magnetoresistance(TMR) vs.field loops and current-driven magnetization switching experiments.Based on the experimental results and device parameters,we further estimate current-driven switching performance of pMTJ including switching time and power,and their dependence on perpendicular magnetic anisotropy and damping constant of the free layer by SPICE-based circuit simulations.Our results show that the pMTJ cells exhibit a less than 1 ns switching time and write energies <1.4 pJ;meanwhile the lower perpendicular magnetic anisotropy(PMA) and damping constant can further reduce the switching time at the studied range of damping constant α <0.1.Additionally,our results demonstrate that the pMTJs with the thermal stability factor■73 can be easily transformed into spin-torque nano-oscillators from magnetic memory as microwave sources or detectors for telecommunication devices.

Cooperative interception with fast multiple model adaptive estimation

For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang-bang evasive maneuver with a random switching time.Combined Fast multiple model adaptive estimation(Fast MMAE)algorithm,the cooperative guidance law takes detection configuration affecting the accuracy of interception into consideration.Introduced the detection error model related to the line-of-sight(LOS)separation angle of two interceptors,an optimal cooperative guidance law solving the optimization problem is designed to modulate the LOS separation angle to reduce the estimation error and improve the interception performance.Due to the uncertainty of the target bang-bang maneuver switching time and the effective fitting of its multi-modal motion,Fast MMAE is introduced to identify its maneuver switching time and estimate the acceleration of the target to track and intercept the target accurately.The designed cooperative optimal guidance law with Fast MMAE has better estimation ability and interception performance than the traditional guidance law and estimation method via Monte Carlo simulation.

Plant Cultivation Device in Intelligent Agricultural Greenhouse

This paper mainly introduces the design and research of plant cultivation device in intelligent agricultural greenhouse.The device can automatically ventilate and control the temperature when the carbon dioxide content is insufficient.At the same time,the light color can be selected according to the plant properties,and the light and dark time can be controlled to provide a suitable growth environment for plants,which makes up for the shortcomings of the existing ordinary greenhouse.With China's strong support for agriculture,automatic agriculture is developing rapidly,and has a broad market prospect.

Particle swarm optimization for time-optimal control design

Abstract：control law for both linear and nonlinear systems. By introducing a penalty function, the method can be mod- ified to deal with systems with constraints. Compared with existing computational methods, the proposed method can be implemented in a straightforward manner. The convergent solutions can be achieved by selecting suitable PSO parameters regardless of the initial guess of the switching times. A double integrator and a third-order nonlinear system are used tO demonstrate the effectiveness and robustness of the proposed method. The method is applied to obtain the time-optimal control law for a high performance linear motion positioning system. The results show the practicality of the proposed algorithm.

TIME AND POLING HISTORY DEPENDENT ENERGY STORAGE AND DISCHARGE BEHAVIORS IN POLY(VINYLIDENE FLUORIDE-CO-HEXAFLUOROPROPYLENE) RANDOM COPOLYMERS

We studied cycle time （0.01-10 s with triangular input waves） and poling history （continuous versus fresh poling） dependent electric energy storage and discharge behaviors in poly（vinylidene fluoride-co-hexafluoropropylene） [P（VDF- HFP）] films using the electric displacement -- the electric field （D-E） hysteresis loop measurements. Since the permanent dipoles in PVDF are orientational in nature, it is generally considered that both charging and discharging processes should be time and poling history dependent. Intriguingly, our experimental results showed that the charging process depended heavily on the cycle time and the prior poling history, and thus the D-E hysteresis loops had different shapes accordingly. However, the discharged energy density did not change no matter how the D-E loop shape varied due to different measurements. This experimental result could be explained in terms of reversible and irreversible polarizations. The reversible polarization could be charged and discharged fairly quickly （〈 5 ms for each process）, while the irreversible polarization depended heavily on the poling time and the prior poling history. This study suggests that it is only meaningful to compare the discharged energy density for PVDF and its copolymer films when different cycle times and poling histories are used.

Performance analysis of STT-RAM with cross shaped free layer using Heusler alloys

We have investigated the performance of a spin transfer torque random access memory （STT-RAM） cell with a cross shaped Heusler compound based free layer using micromagnetic simulations. We have designed a free layer using a Cobalt based Heusler compound. Simulation results clearly show that the switching time from one state to the other state has been reduced, also it has been found that the critical switching current density （to switch the magnetization of the free layer of the STT RAM cell） is reduced.

Energy enhancement and efficient route selection mechanism using H-SWIPT for multi-hop IoT networks

Simultaneous wireless information and power transfer(SWIPT)is recently emerging as one of the vital solutions to prolong the lifetime of energy constrained wireless sensor nodes.However,current works on SWIPT considered only the immediate past-hop node’s RF signal as a source of energy harvesting in multi-hop Internet of things(IoT)networks.In case of weak radio frequency(RF)signal,the amount of harvested energy does not support for continuous communication.Hence,in this paper a new energy harvesting mechanism is proposed which considers multiple sources(MS)such as(1)sink broadcasting energy,(2)co-channel interference,(3)neighbor nodes’RF signal,and(4)immediate past-hop node’s RF signal for energy harvesting.Towards such prospect,a new SWIPT architecture is proposed called hybrid SWIPT(H-SWIPT)by integrating time switching(TS)and power splitting(PS)architectures.Furthermore,an efficient route selection mechanism is introduced to minimize the total energy consumption of the path based on an energy cost metric.To validate the proposed mechanism,simulation experiments are conducted and obtained the superiority of H-SWIPT compared with existing methods in terms of average harvested energy.Further,the effectiveness of proposed method performance is investigated through energy cost at different node density and barrier rates.