Granitic veins(GVs)have a significant influence on the mechanical responses of tunnels excavated in granitic strata.Distinguishing the mechanical properties of host granites(HGs),GVs and vein-granite interfaces(VGIs)i...Granitic veins(GVs)have a significant influence on the mechanical responses of tunnels excavated in granitic strata.Distinguishing the mechanical properties of host granites(HGs),GVs and vein-granite interfaces(VGIs)is critical.For this,this paper analyzed the mechanical behaviors and rupture processes of typical HG,GV,and VGI samples under uniaxial compression condition.For the rocks studied,although the linear axial stress‒strain relation can be identified and the deformation modulus can be determined,the transverse deformation developed nonlinearly with axial stress.As a result,the instantaneous Poisson’s ratio increases continuously and may even exceed 0.5,making it extremely difficult to accurately determine the Poisson’s ratio.In addition,the studied GV samples were found to be significantly brittle,indicating that large-scale GVs cannot be ignored when assessing rockburst hazards in granitic strata with brittle GVs.In terms of the rupture process,the HG and GV samples were gradually damaged by the formation of small-scale cracks and then ruptured by large cracks formed from smallscale cracks,whereas the VGI samples ruptured along large cracks with significant energy release.By examining the characteristic stress thresholds of these three granites,it is noted that the crack closure stress scc exceeds both the crack initiation stress sci and the crack damage stress scd for the HG and VGI samples.The transverse damage to a tested sample appears to be significantly greater than the axial damage,which is essentially related to the rock grain size and grain size distribution.展开更多
The Huangsha-Tieshanlong quartz-vein tungsten polymetallic ore deposit, located in the northern Pangushan-Tieshanlong tungsten ore field in eastern Ganxian-Yudu prospecting areas of the Yushan metallogenic belt, is a ...The Huangsha-Tieshanlong quartz-vein tungsten polymetallic ore deposit, located in the northern Pangushan-Tieshanlong tungsten ore field in eastern Ganxian-Yudu prospecting areas of the Yushan metallogenic belt, is a well-known tungsten deposit in southern Jiangxi province, China. SHRIMP-determined dating of zircons from the Tieshanlong granite yields ages of 168.1±2.1 Ma （n=11, MSWD-1.3）. Rhenium and osmium isotopic dating of molybdenite from the Huangsha quartz-vein tungsten deposit determined by ICP-MS yields a weighted average ages of 153-3 Ma and model ages of 150.22.1 Ma - 155.4-2.3 Ma. The age of the Huangsha tungsten deposit is 10 to 15 Ma later than the Tieshanlong granite, which shows that there might have been another early Late Jurassic magmatic activity between 150 and 160 Ma, a process which is closely related with tungsten mineralization in this area. The Tieshanlong granite, the Hnangsha tungsten deposit and the Pangushan-Tieshanlong ore field were all formed around 150-170 Ma, belonging to products of a Mesozoic second large-scale mineralization. According to the collected molybdenite Re-Os dating results in southern Jiangxi province, the timescale of the associated molybdenum mineralization is 2-6 Ma in the tungsten deposit and the timescale of independent molybdenum mineralization is 1-4 Ma, implying the complexity of tungsten mineralization. Times of molybdenum mineralization are mainly concentrated in the Yanshanian, which includes three stages of 133-135 Ma, 150-162 Ma, and 166-170 Ma, respectively. The 150-162 Ma-stage is in accordance with ages of large-scale WoSn mineralization, which is mainly molybdenum mineralization characterized by associated molybdenum mineralization with development of an even greater-intensity independent molybdenum mineralization. Independent molybdenum mineralization occurred before and after large-scale W-Sn mineralization, which indicates that favorable prospecting period for molybdenum may be in Cretaceous and early late Jurassic.展开更多
The Merguechoum fluorite-barite mineralization,located in the Eastern Meseta of Morocco,is hosted in the Late Hercynian granite.The ore consists of fine crystals of fluorite 1,massive barite 1,euhedral crystals of flu...The Merguechoum fluorite-barite mineralization,located in the Eastern Meseta of Morocco,is hosted in the Late Hercynian granite.The ore consists of fine crystals of fluorite 1,massive barite 1,euhedral crystals of fluorite 2,and barite 2 with calcite and minor quartz and sulfides.The Merguechoum ore deposits have never been investigated.This study was the first contribution that studied the genesis of fluorite and barite.The ore occurs as dissemination within granite intrusion and also fills the NE-SWtrending meter-sized fractures and faults.The values of the total Rare Earth Elements and Yttrium(REY)and the ratios of LREY/HREY,Y/Ho,Tb/Ca,and Tb/La indicate that the Merguechoum fluorite precipitated from hydrothermal fluids,likely basinal brines,which interacted with the Hercynian granite.The REY data indicate that the ore-forming fluids of the early stage have intensely interacted with the Hercynian granite compared to those of the late ore stage.The gradual decrease in the europium(Eu/Eu^(*)),yttrium(Y/Y^(*)),and cerium(Ce/Ce^(*))anomalies and a low concentration ofΣREY observed in the second ore stage compared to the first ore stage suggest an increase in p H and fO_(2)and by inference a decrease in temperature during the evolution of the hydrothermal system.This evolution could be explained by fluid mixing between the ascending basinal hydrothermal fluids and the diluted sulfate-rich meteoric water barite separates from selected samples reveal that the dissolved sulfates(SO_(4)^(2-))were derived from Permian–Triassic sulfates and/or coeval poreseawater sulfates.The proposed fluid mixing triggered the precipitation of an early-stage F-Ba assemblage followed by the second-stage F-Ba mineralization.Geologic fieldwork,REY inventories,and isotope data point to the ore genesis during the Permian–Triassic extensional tectonic activity concerning the Pangea rifting.This extensional tectonic environment is likely the driving force that mobilized a large amount of the ore-forming basinal brines along the available faults and fractures to the loci of ore deposition.展开更多
基金Additionally,the authors appreciate Dr.Zhaopeng Zhang’s assistance in conducting the experiments.This research was funded by the Science and Technology Department of Tibet(Grant No.XZ202201ZY0021G).
文摘Granitic veins(GVs)have a significant influence on the mechanical responses of tunnels excavated in granitic strata.Distinguishing the mechanical properties of host granites(HGs),GVs and vein-granite interfaces(VGIs)is critical.For this,this paper analyzed the mechanical behaviors and rupture processes of typical HG,GV,and VGI samples under uniaxial compression condition.For the rocks studied,although the linear axial stress‒strain relation can be identified and the deformation modulus can be determined,the transverse deformation developed nonlinearly with axial stress.As a result,the instantaneous Poisson’s ratio increases continuously and may even exceed 0.5,making it extremely difficult to accurately determine the Poisson’s ratio.In addition,the studied GV samples were found to be significantly brittle,indicating that large-scale GVs cannot be ignored when assessing rockburst hazards in granitic strata with brittle GVs.In terms of the rupture process,the HG and GV samples were gradually damaged by the formation of small-scale cracks and then ruptured by large cracks formed from smallscale cracks,whereas the VGI samples ruptured along large cracks with significant energy release.By examining the characteristic stress thresholds of these three granites,it is noted that the crack closure stress scc exceeds both the crack initiation stress sci and the crack damage stress scd for the HG and VGI samples.The transverse damage to a tested sample appears to be significantly greater than the axial damage,which is essentially related to the rock grain size and grain size distribution.
基金supported jointly by grants No K1 022K0901 from the Scientific Research Fund of the China Central Non-Commercial Institutegrant No 40772063 from the National Natural Science Foundation of Chinathe Programme of Excellent Young Scientists of the Ministry of Land and Resources and Geological Survey Program Grant 1212010561603-2 from the China Geological Survey
文摘The Huangsha-Tieshanlong quartz-vein tungsten polymetallic ore deposit, located in the northern Pangushan-Tieshanlong tungsten ore field in eastern Ganxian-Yudu prospecting areas of the Yushan metallogenic belt, is a well-known tungsten deposit in southern Jiangxi province, China. SHRIMP-determined dating of zircons from the Tieshanlong granite yields ages of 168.1±2.1 Ma （n=11, MSWD-1.3）. Rhenium and osmium isotopic dating of molybdenite from the Huangsha quartz-vein tungsten deposit determined by ICP-MS yields a weighted average ages of 153-3 Ma and model ages of 150.22.1 Ma - 155.4-2.3 Ma. The age of the Huangsha tungsten deposit is 10 to 15 Ma later than the Tieshanlong granite, which shows that there might have been another early Late Jurassic magmatic activity between 150 and 160 Ma, a process which is closely related with tungsten mineralization in this area. The Tieshanlong granite, the Hnangsha tungsten deposit and the Pangushan-Tieshanlong ore field were all formed around 150-170 Ma, belonging to products of a Mesozoic second large-scale mineralization. According to the collected molybdenite Re-Os dating results in southern Jiangxi province, the timescale of the associated molybdenum mineralization is 2-6 Ma in the tungsten deposit and the timescale of independent molybdenum mineralization is 1-4 Ma, implying the complexity of tungsten mineralization. Times of molybdenum mineralization are mainly concentrated in the Yanshanian, which includes three stages of 133-135 Ma, 150-162 Ma, and 166-170 Ma, respectively. The 150-162 Ma-stage is in accordance with ages of large-scale WoSn mineralization, which is mainly molybdenum mineralization characterized by associated molybdenum mineralization with development of an even greater-intensity independent molybdenum mineralization. Independent molybdenum mineralization occurred before and after large-scale W-Sn mineralization, which indicates that favorable prospecting period for molybdenum may be in Cretaceous and early late Jurassic.
文摘The Merguechoum fluorite-barite mineralization,located in the Eastern Meseta of Morocco,is hosted in the Late Hercynian granite.The ore consists of fine crystals of fluorite 1,massive barite 1,euhedral crystals of fluorite 2,and barite 2 with calcite and minor quartz and sulfides.The Merguechoum ore deposits have never been investigated.This study was the first contribution that studied the genesis of fluorite and barite.The ore occurs as dissemination within granite intrusion and also fills the NE-SWtrending meter-sized fractures and faults.The values of the total Rare Earth Elements and Yttrium(REY)and the ratios of LREY/HREY,Y/Ho,Tb/Ca,and Tb/La indicate that the Merguechoum fluorite precipitated from hydrothermal fluids,likely basinal brines,which interacted with the Hercynian granite.The REY data indicate that the ore-forming fluids of the early stage have intensely interacted with the Hercynian granite compared to those of the late ore stage.The gradual decrease in the europium(Eu/Eu^(*)),yttrium(Y/Y^(*)),and cerium(Ce/Ce^(*))anomalies and a low concentration ofΣREY observed in the second ore stage compared to the first ore stage suggest an increase in p H and fO_(2)and by inference a decrease in temperature during the evolution of the hydrothermal system.This evolution could be explained by fluid mixing between the ascending basinal hydrothermal fluids and the diluted sulfate-rich meteoric water barite separates from selected samples reveal that the dissolved sulfates(SO_(4)^(2-))were derived from Permian–Triassic sulfates and/or coeval poreseawater sulfates.The proposed fluid mixing triggered the precipitation of an early-stage F-Ba assemblage followed by the second-stage F-Ba mineralization.Geologic fieldwork,REY inventories,and isotope data point to the ore genesis during the Permian–Triassic extensional tectonic activity concerning the Pangea rifting.This extensional tectonic environment is likely the driving force that mobilized a large amount of the ore-forming basinal brines along the available faults and fractures to the loci of ore deposition.
