Investigation of Nonlinear PI Multi-loop Control Strategy for Aircraft HVDC Generator System with Wound Rotor Synchronous Machine

In order to enhance the transient performance of aircraft high voltage DC(HVDC)generation system with wound rotor synchronous machine(WRSM)under a wide speed range,the nonlinear PI multi-loop control strategy is proposed in this paper.Traditional voltage control method is hard to achieve the dynamic performance requirements of the HVDC generation system under a wide speed range,so the nonlinear PI parameter adjustment,load current feedback and speed feedback are added to the voltage and excitation current double loop control.The transfer function of the HVDC generation system is derived,and the relationship between speed,load current and PI parameters is obtained.The PI parameters corresponding to the load at certain speed are used to shorten the adjusting time when the load suddenly changes.The dynamic responses in transient processes are analyzed by experiment.The results illustrate that the WRSM HVDC generator system with this method has better dynamic performance.

SMOGN,MFO,and XGBoost Based Excitation Current Prediction Model for Synchronous Machine

The power factor is the ratio between the active and apparent power,and it is available to determine the operational capability of the intended circuit or the parts.The excitation current of the synchronous motor is an essential parameter required for adjusting the power factor because it determines whether the motor is under the optimal operating status.Although the excitation current should predict with the experimental devices,such a method is unsuitable for online real-time prediction.The artificial intelligence algorithm can compensate for the defect of conventional measurement methods requiring the measuring devices and the model optimization is compared during the research process.In this article,the load current,power factor,and power factor errors available in the existing dataset are used as the input parameters for training the proposed artificial intelligence algorithms to select the optimal algorithm according to the training result,for this algorithm to have higher accuracy.The SMOGN(Synthetic Minority Over-Sampling Technique for Regression with Gaussian Noise)is selected for the research by which the data and the MFO(Moth-flame optimization algorithm)are created for the model to adjust and optimize the parameters automatically.In addition to enhancing the prediction accuracy for the excitation current,the automatic parameter adjusting method also allows the researchers not specializing in the professional algorithm to apply such application method more efficiently.The final result indicated that the prediction accuracy has reached“Mean Absolute Error(MAE)=0.0057,Root Mean Square Error(RMSE)=0.0093 andR2 score=0.9973”.Applying this method to themotor control would be much easier for the power factor adjustment in the future because it allows the motor to operate under the optimal power status to reduce energy consumption while enhancing working efficiency.

Reduction of Cogging Torque and Electromagnetic Vibration Based on Different Combination of Pole Arc Coefficient for Interior Permanent Magnet Synchronous Machine

Cogging torque and electromagnetic vibration are two important factors for evaluating permanent magnet synchronous machine(PMSM)and are key issues that must be considered and resolved in the design and manufacture of high-performance PMSM for electric vehicles.A fast and accurate magnetic field calculation model for interior permanent magnet synchronous machine(IPMSM)is proposed in this article.Based on the traditional magnetic potential permeance method,the stator cogging effect and complex boundary conditions of the IPMSM can be fully considered in this model,so as to realize the rapid calculation of equivalent magnetomotive force(MMF),air gap permeance,and other key electromagnetic properties.In this article,a 6-pole 36-slot IPMSM is taken as an example to establish its equivalent solution model,thereby the cogging torque is accurately calculated.And the validity of this model is verified by a variety of different magnetic pole structures,pole slot combinations machines,and prototype experiments.In addition,the improvement measure of the machine with different combination of pole arc coefficient is also studied based on this model.Cogging torque and electromagnetic vibration can be effectively weakened.Combined with the finite element model and multi-physics coupling model,the electromagnetic characteristics and vibration performance of this machine are comprehensively compared and analyzed.The analysis results have well verified its effectiveness.It can be extended to other structures or types of PMSM and has very important practical value and research significance.

Coupled Electromagnetic-Thermal-Fluidic Analysis of Permanent Magnet Synchronous Machines with a Modified Model

The researches on the heat generation and dissipa-tion of the permanent magnet synchronous machines(PMSMs)are integrated problems involving multidisciplinary studies of electromagnetism,thermomechanics,and computational fluid dynamics.The governing equations of the multi-physical prob-lems are coupled and hard to be solved and illustrated.The high accuracy mathematical model in the algebraically integral con-servative forms of the coupled fields is established and computed in this paper.And the equation coupling with the fluid flow and the temperature variation is modified to improve the positive definiteness and the symmetry of the global stiffness matrix.The computational burden is thus reduced by the model modification.A 20kW 4500rpm permanent magnet synchronous machine(PMSM)is taken as the prototype,and the calculation results are validated by experimental ones.

Zero-sequence Current Suppressing Strategy for Dual Three-phase Permanent Magnet Synchronous Machines Connected with Single Neutral Point

Dual three-phase permanent-magnet synchronous machines(DTP-PMSM)connected with a single neutral point provide a loop for zero-sequence current(ZSC).This paper proposes a novel space vector pulse width modulation(SVPWM)strategy to suppress the ZSC.Five vectors are selected as basic voltage vectors in one switching period.The fundamental and harmonic planes and the zero-sequence plane are taken into consideration to synthesis the reference voltage vector.To suppress the ZSC,a non-zero zero-sequence voltage(ZSV)is generated to compensate the third harmonic back-EMF.Rather than triangular carrier modulation,the sawtooth carrier modulation strategy is used to generate asymmetric PWM signals.The modulation range is investigated to explore the variation of modulation range caused by considering the zero-sequence plane.With the proposed method,the ZSC can be considerably reduced.The simulated and experimental results are presented to validate the effectiveness of the proposed modulation strategy.

Multi-objective Hierarchical Optimization of Interior Permanent Magnet Synchronous Machines Based on Rotor Surface Modification

To solve the problem of large torque ripple of interior permanent magnet synchronous motor(IPMSM),the rotor surface notch design method was used for V-type IPMSM.In order to accurately obtain the optimal parameter values to improve the torque performance of the motor,this paper takes the output torque capacity and torque ripple as the optimization objectives,and proposes a multi-objective layered optimization method based on the parameter hierarchical design combined with Taguchi method and response surface method(RSM).The conclusion can be drawn by comparing the electromagnetic performance of the motor before and after optimization,the proposed IPMSM based on the rotor surface notch design can not only improve the output torque,but also play an obvious inhibition effect on the torque ripple.

Design of an Asymmetric Rotor Pole for Wound Field Synchronous Machines

This study proposes a novel asymmetric rotor pole design for wound field synchronous machines(WFSMs),which can achieve high saliency ratio and also low torque ripple.The key point is the optimal design of the asymmetric rotor pole with the inverse-cosine-shaped(ICS)plus reverse 3rd harmonic shaping.The asymmetric rotor pole can help to improve the average output torque by enhancing the saliency ratio.The reverse 3rd harmonic shaping on the rotor pole surface is mainly used to reduce the torque ripple.To certify the effectivity of the proposed design,three-phase 54-slot/6-pole 4.7kW WFSMs with uniform air gap and with non-uniform air gap shaped by the ICS plus optimum reverse 3rd harmonic are utilized as the basic model and referenced model for comparison.For the referenced model,the optimum amplitude of reverse 3rd harmonic is preferred as 1/6.Finally,all electromagnetic characteristics of the investigated machines are predicted by the finite-element method(FEM).The highest saliency ratio and comparatively low torque ripple have been verified.

Low-frequency Oscillation Damping Control for Large-scale Power System with Simplified Virtual Synchronous Machine

This study focuses on a virtual synchronous machine(VSM) based on voltage source converters to mimic the behavior of synchronous machines(SMs) and improve the damping ratio of the power system. The VSM model is simplified according to some assumptions(neglecting the speed variation and the stator transients) to allow for the possibility of dealing with low-frequency oscillation in large-scale systems with many VSMs. Furthermore, a virtual power system stabilizer(VPSS) structure is proposed and tuned using a method based on a linearized power system dynamic model. The linear and nonlinear analyses examine the stability of two modified versions of a 16-machine power system in which, in the first case, partial classical machines are replaced by VSMs, and in the second case, all SMs are replaced by VSMs. The simulation results of the case studies validate the efficiency of the proposed control strategy.

A Survey on Fault Diagnosis and Fault Tolerant Methodologies for Permanent Magnet Synchronous Machines

This paper presents a comprehensive survey of fault diagnosis and fault tolerant approaches for permanent magnet synchronous machines(PMSM).PMSMs are prominent in the pervading usage of electric motors,for their high efficiency,great robustness,reliability and low torque inertia.In spite of their extensive appliance,they can be quite non-resilient and inadequate in operation when faults appear in motor drive apparatus such as inverters,stator windings,sensors,etc.These may lead to insulation failure,torque fluctuations,overcurrent or even system collapse.On that account,fault diagnosis and fault tolerant methods are equipped to enhance the stability and robustness in PMSMs.Progressive methodologies of PMSM fault diagnosis and tolerance are classified,discussed,reviewed and compared in this paper,beginning with mat hematical modeling of PMSM and then scrutinizing various fault conditions in PMSMs.Finally,the scope of research on the topic is highlighted.The contribution of this review is to emphasize optimistic schemes and to assist researchers with the latest trends in this field for future directions.

Adaptive control of permanent magnet synchronous machines with disturbance estimation

In this paper, an adaptive control scheme is introduced for permanent magnet synchronous machines （PMSMs） as an alternative to classical control techniques. The adaptive control strategy capitalizes on the machine＇s inverse dynamics to achieve accurate tracking by using an observer to approximate disturbance in the form of friction and load torque. The controller＇s output is then fed to a space vector pulse width modulation （SVPWM） algorithm to produce duty cycles for the inverter. The control scheme is validated through a set of simulations on an experimentally validated PMSM model. Results for different situations highlight its high speed tracking accuracy and high performance in compensating for friction and load disturbances of various magnitudes.

Improved Hybrid Method to Calculate Inductances of Permanent Magnet Synchronous Machines with Skewed Stators Based on Winding Function Theory

An improved hybrid method combining two dimensional(2D)finite element analysis(FEA)and the analytical method is put forward to calculate the stator winding inductance and synchronous inductance influenced by stator skewing technique.Based on winding function theory(WFT),the improved method proposes two factors to describe variable inductances along the stator skewing angles.Comprehensive simulations are then performed on three interior permanent magnet synchronous machines(IPMSMs),one normal and two skewed machines(half slot and one slot pitch skewing respectively).Extensive experiments are conducted on relevant prototypes with good correlation.Moreover,analysis and comparisons are made as to the influence of different skewing angles on the inductances and torque-speed curves.It is found that Ld increases and Lq decreases by skewing,leading to the reduction of the rotor saliency and maximal torque capability,but increase of the flux weakening capability.

Torque Ripple Reduction of Synchronous Reluctance Machine by Using Asymmetrical Barriers and Hybrid Magnetic Core

As there is no need of permanent magnet(PM)material and only silicon steel sheet required on the rotor,synchronous reluctance machine(SynRM)can be used for many applications and draws a great research interest.For the SynRM,the torque ripple is a big issue and a great of work could been done on reducing it.In this paper,asymmetrical magnetic flux barriers in the SynRM rotor were studied comprehensively,including angle and width of each layer and each side of the magnetic barrier.The SynRMb with asymmetrical and parallel magnetic flux barrier was found as the best way to design SynRM based on the multi-objective design optimization method.Moreover,each parameter was studied to show the design rule of the asymmetrical magnetic flux barrier.As the average torque will be reduced with the asymmetrical barrier is used,the grain-oriented silicon steel is used on stator teeth of the SynRMb(SynRMbG)was proposed and studied.The analysis results show that the proposed new method can make the SynRM have better performance.

Square-Wave Drive for Synchronous Reluctance Machine and its Torque Ripple Analysis

Synchronous reluctance machine(SynRM)can be perceived as a special type of permanent magnet synchronous machine(PMSM),and shares similar control method,i.e.the sine-wave current drive with sinusoidal phase currents.In this paper,square-wave drive,which is employed for permanent magnet brushless(BLDC)motors,is employed for the SynRM,in order to economically reduce the cost of rotor position sensor.It is revealed that the torque density and efficiency are slightly sacrificed,whereas torque ripple is deteriorated,proving the SynRM with square-wave drive still promising for the cost-sensitive application if torque ripple is not considered as a critical issue.To further investigate the additional pulsating torque under square-wave drive,mathematical model based on a-b-c phase inductance and d-q axis inductance are established,together with the time-stepping FE calculated currents.It is concluded that the harmonics in the currents tend to cause non-sinusoidal variation of the magnetic reluctance,which can be represented as additional inductance harmonics.The harmonics of the current and inductance interact with each other,thus undesirable torque ripple components are produced.

Design Methods of Transversally Laminated Synchronous Reluctance Machines

Transversally laminated synchronous reluctance machine(SynRM)are usually designed with multiple-layer flux barriers to achieve high electromagnetic performance.This paper summarizes three design methods to optimize the machine.Related implementation procedures are detailed.Besides,advantages and disadvantages of these methods are discussed.Based on these conventional techniques,a comprehensive optimization method is proposed,with which a prototype SynRM is designed.The performances of this prototype are discussed to verify the optimal design method.

Modeling and Hardware-in-the-Loop System Realization of Electric Machine Drives-A Review

This paper presents a state-of-the-art review in modeling approach of hardware in the loop simulation(HILS)realization of electric machine drives using commercial real time machines.HILS implementation using digital signal processors(DSPs)and field programmable gate array(FPGA)for electric machine drives has been investigated but those methods have drawbacks such as complexity in development and verification.Among various HILS implementation approaches,more efficient development and verification for electric machine drives can be achieved through use of commercial real time machines.As well as implementation of the HILS,accurate modeling of a control target system plays an important role.Therefore,modeling trend in electric machine drives for HILS implementation is needed to be reviewed.This paper provides a background of HILS and commercially available real time machines and characteristics of each real time machine are introduced.Also,recent trends and progress of permanent magnet synchronous machines(PMSMs)modeling are presented for providing more accurate HILS implementation approaches in this paper.

Electromechanical Transient Modeling Analysis of Large-Scale New Energy Grid Connection

The synchronous virtual machine uses inverter power to imitate the performance of the conventional synchronous machine.It also has the same inertia,damping,frequency,voltage regulation,and other external performance as the generator.It is the key technology to realize new energy grid connections’stable and reliable operation.This project studies a dynamic simulation model of an extensive new energy power system based on the virtual synchronous motor.A new energy storage method is proposed.The mathematical energy storage model is established by combining the fixed rotor model of a synchronous virtual machine with the charge-discharge power,state of charge,operation efficiency,dead zone,and inverter constraint.The rapid conversion of energy storage devices absorbs the excess instantaneous kinetic energy caused by interference.The branch transient of the critical cut set in the system can be confined to a limited area.Thus,the virtual synchronizer’s kinetic and potential energy can be efficiently converted into an instantaneous state.The simulation of power system analysis software package(PSASP)verifies the correctness of the theory and algorithm in this paper.This paper provides a theoretical basis for improving the transient stability of new energy-connected power grids.

Recent Development of Linear Machine Topologies and Applications

Linear machines(LMs)produce linear motion without any intermediate transmission mechanisms,thus the whole electromechanical system has simple structure and its efficiency is high.Because of such merits,linear machines have been studied for a long time and rapidly developed in recent years.Due to the characteristic of open structure,linear machines have more diversity than rotary machines in terms of machine topologies.Accounting for the wide applications of linear machines,e.g.Maglev train,precision machine tools,semiconductor processing device,automatic equipment,logistic transport line,ropeless lifter,compressor,etc.,this paper reviews the most applied linear machines including machine topologies,operating principle and features.In addition,the influence of end effects and the corresponding reduction methods are also summarized.Finally,several commercial applications are exemplified.

Design and Analysis of New Modular Stator Hybrid Excitation Synchronous Motor

Hybrid excitation motor is a combination of permanent magnet motor and electric excitation motor,which can flexibly adjust the air gap magnetic field.At present,the traditional silicon steel sheet core material is widely used,but this material limits the further reduction of stator iron loss.In this paper,a new type of hybrid excitation synchronous motor with modular stator structure based on amorphous alloy material is proposed.The design power is 1kW,and the speed is 3000rpm.By placing the armature winding and electric excitation winding in the stator slot,the slip ring and brush are avoided,and the reliability of the motor is improved.The rotor adopts staggered magnetic pole structure,which has strong flux adjusting ability.The core loss is greatly reduced by using amorphous alloy.Firstly,the structure and working principle of the new motor are given;Secondly,the size parameters of the motor are given,and the principle of flux adjustment is verified and analyzed by three-dimensional finite element(3D-FEM);Finally,through theoretical analysis of the influence factors of the magnetic adjustment ability and 3D-FEM finite element computation,the flux adjustment ability and the torque lifting at low speed are verified,and the advantages of the motor are verified.

Quantitative Comparison of Electromagnetic Performance of Electrical Machines for HEVs/EVs

In this paper,various types of sinusoidal-fed electrical machines,i.e.induction machines(IMs),permanent magnet(PM)machines,synchronous reluctance machines,variable flux machines,wound field machines,are comprehensively reviewed in terms of basic features,merits and demerits,and compared for HEV/EV traction applications.Their latest developments are highlighted while their electromagnetic performance are quantitatively compared based on the same specification as the Prius 2010 interior PM(IPM)machine,including the torque/power-speed characteristics,power factor,efficiency map,and drive cycle based overall efficiency.It is found that PM-assisted synchronous reluctance machines are the most promising alternatives to IPM machines with lower cost and potentially higher overall efficiency.Although IMs are cheaper and have better overload capability,they exhibit lower efficiency and power factor.Other electrical machines,such as synchronous reluctance machines,wound field machines,as well as many other newly developed machines,are currently less attractive due to lower torque density and efficiency.

Recent Development of Reluctance Machines with Different Winding Configurations,Excitation Methods,and Machine Structures

This paper reviews the performances of some newly developed reluctance machines with different winding configurations,excitation methods,stator and rotor structures,and slot/pole number combinations.Both the double layer conventional(DLC-),double layer mutually-coupled(DLMC),single layer conventional(SLC-),and single layer mutually-coupled(SLMC-),as well as fully-pitched(FP)winding configurations have been considered for both rectangular wave and sinewave excitations.Different conduction angles such as unipolar􀫚120°elec.,unipolar/bipolar􀫚180°elec.,bipolar􀫛240°elec.and bipolar􀫜360°elec.have been adopted and the most appropriate conduction angles have been obtained for the SRMs with different winding configurations.In addition,with appropriate conduction angles,the 12-slot/14-pole SRMs with modular stator structure is found to produce similar average torque,but lower torque ripple and iron loss when compared to non-modular 12-slot/8-pole SRMs.With sinewave excitation,the doubly salient synchronous reluctance machines with the DLMC winding can produce the highest average torque at high currents and achieve the highest peak efficiency as well.In order to compare with the conventional synchronous reluctance machines(SynRMs)having flux barriers inside the rotor,the appropriate rotor topologies to obtain the maximum average torque have been investigated for different winding configurations and slot/pole number combinations.Furthermore,some prototypes have been built with different winding configurations,stator structures,and slot/pole combinations to validate the predictions.