Prospects of Using Low-Code in the Creation of Automated Systems

Ever-changing market conditions and a rapidly changing IT landscape call for fast and cheap ways to meet software demands. In order to tackle these problems, low-code development platforms (LCDPs) have emerged. These platforms are designed with the idea to limit recurring traditional hand-coding and programming. This article provides a theoretical overview of low-code solutions. The advantages and disadvantages of using LCDP in the creation of automated systems are considered. In conclusion, a conclusion is formulated about the prospects of using low-code technology.

The Present Situation of Chattel Guarantee System and Its Improvements—Taking the Angle of American Uniform Commercial Code(UCC)

Although there are appropriate stipulations for the chattel guarantees in the law of China, this guarantee system could not adapt to the request of economy's development because of the following reasons: the scope of chattel guarantees is narrow according to relevant stipulations; the transaction cost of the chattel is high; mortgage registration of chattel is in a mess; lack of efficiently executive guarantee system, etc. To counter the problems existing in the present Chinese chattel guarantee system, in this article, the author proposed some corresponding suggestions and countermeasures, hoping to perfect the chattel guarantee system in China.

SRDAAR－QNPP：a computer code system for the real－time dose assessment of an accident release for Qinshan Nuclear Power Plant

The paper presents a computer code system 'SRDAAR- QNPP' for the real-time dose as-sessment of an accident release for Qinshan Nuclear Power Plant. It includes three parts:thereal-time data acquisition system, assessment computer. and the assessment operating code system. InSRDAAR-QNPP, the wind field of the surface and the lower levels are determined hourly by using amass consistent three-dimension diasnosis model with the topographic following coordinate system.A Lagrangin Puff model under changing meteorological condition is adopted for atmosphericdispersion, the correction for dry and wet depositions. physical decay and partial plume penetrationof the top inversion and the deviation of plume axis caused by complex terrain have been taken in-to account. The calculation domain areas include three square grid areas with the sideline 10 km, 40krn and 160 km and a grid interval 0.5 km, 2.0 km, 8.0 km respectively. Three exposure pathwaysare taken into account:the external exposure from immersion cloud and passing puff, the internalexposure from inhalation and the external exposure from contaminated ground. This system is ableto provide the results of concentration and dose distributions within 10 minutes after the data havebeen inputed.

The development and verification of thermal-hydraulic code on passive residual heat removal system of Chinese advanced PWR

The technology of passive safety is the current trend among safety systems in nuclear power plant. Pas- sive residual heat removal system (PRHRS), a major part of passive safety systems of Chinese advanced PWR, is a novel design with three-fold natural circulation. On the basis of reasonable physics and mathematics models, MI- TAP-PRHRS code was developed to analyze steady and transient characteristics of the PRHRS. The calculation and analysis show that the code simulates steady characteristics of the PRHRS very well, and it is able to simulate tran- sient characteristics of all startup modes of the PRHRS. However, the quantitative description is poor during the ini- tial stages of the transition process when water hammer occurs.

Efficient Numerical Optimization Algorithm Based on New Real-Coded Genetic Algorithm, AREX + JGG, and Application to the Inverse Problem in Systems Biology

In Systems Biology, system identification, which infers regulatory network in genetic system and metabolic pathways using experimentally observed time-course data, is one of the hottest issues. The efficient numerical optimization algorithm to estimate more than 100 real-coded parameters should be developed for this purpose. New real-coded genetic algorithm (RCGA), the combination of AREX (adaptive real-coded ensemble crossover) with JGG (just generation gap), have applied to the inference of genetic interactions involving more than 100 parameters related to the interactions with using experimentally observed time-course data. Compared with conventional RCGA, the combination of UNDX (unimodal normal distribution crossover) with MGG (minimal generation gap), new algorithm has shown the superiority with improving early convergence in the first stage of search and suppressing evolutionary stagnation in the last stage of search.

Integrated management system of agro-fishery products based on QR-code

Recently,both the importance and awareness relating to food safety relating to agrochemicals,chemical fertilizers,the pollution of ecosystem and unwholesome foods are growing rapidly.For the same reason,the purchaser's curiosity increases to know about the production process which can be accomplished by production traceability system.The traceability system can store and superintend the specific attribute information about products regarding the productive centre,producer and production finish data.The products undergo various circulation processes and they are being managed by individually constructed traceability system.Thus,it is difficult for the producer and the consumer to guarantee the safety from transpirable issues about the falsification of production traceability because the traceability information can be re-produced by forging through various ways.So in this paper,we proposed a system for integrated management of agro-fishery products based on quick response code(QR-code)for forgery prevention which may help to solve these issues.The proposed system makes QR-code using production information provided by producer.And then it is provided to the distributor and the consumer through integrated service model using the QR-code.Therefore,this system make sure to provide the same production traceability about the products to the distributor and the consumer and always keeps both updated with the same information.

CCOC：An Optimizing Compiling System for Concurrent C Supporting Inter－process Code Analysis and Optimization

At present, there are some static code analyses and optimizations that can be applied to Concurrent C programs to improve their performance or verify their logical correctness. These analyses and optimizations are inter-process. In order to make their implementation easy, we propose a new method to construct an optimizing compiling system CCOC for Concurrent C. CCOC supports inter-process code analysis and optimization to Concurrent C programs and does not affect the system's portability and separate compilation of source programs. We also discuss some implementation details of CCOC briefly.

Design of concatenated turbo-SPC coded space-time systems

Multiple antenna wireless systems can provide larger channel capacity and enable spatial diversity to combat fading. In this paper we conduct an investigation into the design of coded space-time system obtained by serially concatenating channel code module and space-time code module with an interleaver in between. As an example, the system is constructed by employing low decoding complexity turbo-SPC （single parity check） code as outer module and linear complex field space-time code as inner module, which achieves full diversity and lossless equivalent channel capacity. Simulation results prove that our designed system performs well and it only loses 0.8 dB from multiple-input multiple-output （MIMO） capacity at BER = 10^-5 in the case of information bit length 6048. Compared with turbo code-based systems, it also has lower error floor.

A NEW DECODER OF SYNCHRONOUS OPTICAL CODE DIVISION MULTIPLE ACCESS SYSTEMS USING SEGMENTED CORRELATION

A new segmented correlating decoder of synchronous optical CDMA using modified prime sequence codes is proposed. The performance of the proposed system is analyzed under the assumption of Poisson shot noise model for the receiver photodetector. The decoder technique is shown to be more effective to improve the bit error probability performance than the method using an optical hard-limiter.

Locally Minimum Storage Regenerating Codes in Distributed Cloud Storage Systems

In distributed cloud storage systems, inevitably there exist multiple node failures at the same time. The existing methods of regenerating codes, including minimum storage regenerating(MSR) codes and minimum bandwidth regenerating(MBR) codes, are mainly to repair one single or several failed nodes, unable to meet the repair need of distributed cloud storage systems. In this paper, we present locally minimum storage regenerating(LMSR) codes to recover multiple failed nodes at the same time. Specifically, the nodes in distributed cloud storage systems are divided into multiple local groups, and in each local group(4, 2) or(5, 3) MSR codes are constructed. Moreover, the grouping method of storage nodes and the repairing process of failed nodes in local groups are studied. Theoretical analysis shows that LMSR codes can achieve the same storage overhead as MSR codes. Furthermore, we verify by means of simulation that, compared with MSR codes, LMSR codes can reduce the repair bandwidth and disk I/O overhead effectively.

建行信用卡系统全栈国产化改造研究

信用卡业务是业务逻辑最复杂的银行业务之一,其对可用性、可靠性、处理性能要求较高。从技术发展角度来看,多技术栈融合的新型IT架构,符合云计算资源池化的趋势。从业务角度来看,为满足不同的业务需求,同样存在多技术栈融合架构的诉求。然而,多计算架构并非简单实现一个全新的技术栈即可,需要解决架构改造与设计、系统验证、兼容性以及故障切换等一系列问题。面对上述挑战,该文面向金融IT系统高并发、高性能以及高可用需求,介绍了建行面向金融行业的高性能、高可用和高安全可靠的x86、ARM双平台混合架构系统中的设计与思考。通过一系列的代码迁移、应用迁移以及系统垂直优化技术,实现高性能、高可用和高安全的诉求,并在建行得到了大规模、长时间的真实系统验证。

CRC校验码软件生成技术原理分析

循环冗余校验(Cyclic Redundancy Check,CRC)具有检错能力强,运算简单,易于直接用硬件数字电路实现的特点。在完善CRC校验码生成原理模型的基础上,研究了信息系统传输带CRC校验码数据包的一般过程,提出了三种计算数据包CRC校验码的技术方法,在ADI公司DSP软件集成开发仿真测试环境中,设计了一组嵌入式程序,生成了符合ITU组织CRC16 ITU-T V.41标准的CRC校验码码表,分析并总结了CRC校验码码表元素的工程含义和应用方法,研究了两种计算数据包CRC校验码工程实现方法的技术特点,并验证了它们的正确性、一致性和有效性。

Criticality Search of an Accelerator Driven System Using the ANET Code

One of the most important safety parameters taken into consideration during the design and actual operation of a nuclear reactor is its control rods adjustment to reach criticality. Concerning the conventional nuclear systems, the specification of their rods’ position through the utilization of neutronics codes, deterministic or stochastic, is considered nowadays trivial. However, innovative nuclear reactor concepts such as the Accelerator Driven Systems require sophisticated simulation capabilities of the stochastic neutronics codes since they combine high energy physics, for the spallation-produced neutrons, with classical nuclear technology. ANET (Advanced Neutronics with Evolution and Thermal hydraulic feedback) is an under development stochastic neutronics code, able to cover the broad neutron energy spectrum involved in ADS systems and therefore capable of simulating conventional and hybrid nuclear reactors and calculating important reactor parameters. In this work, ANETS’s reliability to calculate the effective multiplication factor for three core configurations containing control rods of the Kyoto University Critical Assembly, an operating ADS, is examined. The ANET results successfully compare with results produced by well-established stochastic codes such as MCNP6.1.

A Solution Based on Modeling and Code Generation for Embedded Control System

With the development of computer technology, embedded control system plays an important role in modern industry. For the embedded system, traditional development methods are time-consuming and system is not easy to maintain. Domain-specific modeling provides a solution for the problems. In this paper, we proposed development architecture for embedded control systems based on MIC. GME is used to construct meta-model and application model, model in-terpreter interprets model and stores model information in xml format document. The final cross-platform codes are automatically generated by different templates and xml format document. This development method can reduce time and cost in the lifecycle of system development.

基于FR-Sdaso程序对FFTF LOFWOS Test#13基准例题的热工水力分析

FFTF LOFWOS Test#13是美国FFTF钠冷回路式快堆进行的无保护失流试验,目的是为了证明反应堆的固有安全特性。本文采用中国原子能科学研究院自主开发的FR-Sdaso程序参加了IAEA策划发起的基于该试验的基准例题项目。利用FR-Sdaso程序将一回路主泵转速、二回路流量和空气热交换器出口钠温作为边界条件,建立了FFTF基准例题模拟模型。计算结果与FFTF LOFWOS Test#13试验结果对比分析表明,FR-Sdaso程序能较好地预测无保护失流事故后反应堆功率以及一、二回路温度和流量的瞬态变化,自然循环阶段反应堆衰变功率计算值与试验值的最大相对偏差为−7.1%,一回路3个环路自然循环流量与初始稳态值的最大相对偏差为0.65%。对于第2排和第6排PIOTA组件,由于模拟中未考虑瞬态过程中堆芯功率分布变化和组件之间的传热,出口温度的计算值较试验测量值最大偏高25.5℃,计算结果更保守。FR-Sdaso程序对FFTF LOFWOS Test#13基准例题的分析初步验证了程序堆芯和一、二回路热工水力模型的正确性。

宪法视野下的婚检制度变革与完善——基于《民法典》第1053条告知义务的履行

《民法典》第1053条对禁婚疾病传统作出重大调整,成为新时代背景下婚检制度设计的重要法律依据。在婚姻宪法保护框架下,“婚姻自由—私人告知—自愿婚检”的传统思路忽略了比“婚姻自由保护”更为根本的“婚姻传统功能保护”。婚姻的公共性及解决相关司法实践难题的客观需要,使得婚检融入履行环节成为可能。从《宪法》到《民法典》再到《婚姻登记条例》,民法典时代婚检制度设计应沿循“婚姻保护—法定告知—弱强制婚检”设计思路,采取“程序强制+形式审查”模式,即当事人于婚前相互告知专业健康检查结论,婚姻登记机关仅要求当事人填写知晓声明并进行必要口头提示而不对告知内容及其真实性进行实质审查。

党的组织法规法典的规范体系:应然定位、法规构成与立规限度

规范体系的边界划分是编纂党的组织法规法典首先要明确的问题。党的组织法规法典的规范体系可以从党的选举类、组织类、象征标志类和组织工作类法规进行定位,宜选择“中法典”的编纂思路,对党的选举类、组织类和组织工作类法规进行法典化。党的组织法规与其他领域党内法规的调整范围划分是法典规范体系的外在限定,决定着法典规范体系的内容取舍,为此需要厘清党的组织法规与其他领域法规的界限。党的组织法规法典规范体系的立规限度应以法规是否频繁变动、调整领域是否具有局限性、是否具有试行期限、是否属于细密配套性法规、是否在适用主体上具有特定性及适用空间领域具有特定性等为标准进行考量,在此基础上合理界定法典规范体系的立规限度,最终形成边界清晰、规范内容完整和内外协调的党的组织法规法典。

农产品追溯码编码研究

追溯是当今国内外用于保障农产品质量安全的有效手段之一,农产品追溯码的设计及应用是实现质量安全追溯的技术基础。对我国部分省市的农产品质量安全追溯系统所应用的追溯码进行调研,在深入研究国际物品编码组织(GS1)技术体系的基础上,从编码、数据结构和载体表示等方面详细阐述农产品追溯码的规则,为开展农产品质量安全追溯工作提供参考。

Efficient Early Termination Strategy for LDPC Codes in GPS Systems

By exploiting the structural features of L1C messages,a novel Early Termination( ET) strategy is proposed to speed up the decoding of low-density parity-check( LDPC) codes in the GPS system. The proposed strategy is based on the cyclic redundancy check( CRC) of the messages in the subframes 2 and 3. The simulation results show that average number of iterations of the proposed strategy is less than that of the standard ET strategy,with nearly no degradation in decoding performance. Besides,the proposed ET strategy can be efficiently implemented in a sequential or parallel manner. Thus,the proposed ET strategy is attractive for practical purposes.