期刊文献+
共找到1,171,082篇文章
< 1 2 250 >
每页显示 20 50 100
基于ADAMS的Stewart平台运动学分析
1
作者 葛正浩 高创 +2 位作者 张晓亮 胡锋利 唐志雄 《轻工机械》 CAS 2024年第2期1-7,22,共8页
针对在Stewart 6自由度并联平台设计中,支腿的运动学及动力学参数理论计算过于复杂的问题,课题组提出了基于ADAMS的Stewart平台反解与正解相结合的分析方法。首先,通过ADAMS反解求得支腿位移参数;然后,将位移参数转换为驱动函数添加在... 针对在Stewart 6自由度并联平台设计中,支腿的运动学及动力学参数理论计算过于复杂的问题,课题组提出了基于ADAMS的Stewart平台反解与正解相结合的分析方法。首先,通过ADAMS反解求得支腿位移参数;然后,将位移参数转换为驱动函数添加在各个支腿上;接着,通过ADAMS正解求解支腿其余运动参数;最后,通过实例对比理论计算与ADAMS分析数据。结果表明:课题组提出方法求得的支腿位移与理论值之差均小于0.01 mm,支腿最大速度及最大加速度与理论值误差均小于2%,从而验证了该分析方法的合理性与科学性。该分析方法为工程中遇到的6自由度平台已知动平台驱动函数求解支腿参数的实际问题提供了一种高效的解决办法。 展开更多
关键词 STEWART平台 adams软件 运动学分析 反解 正解
下载PDF
基于Adams与Amesim的二维精密高速转台机电联合仿真分析
2
作者 杨嘉宾 胡晓兵 +3 位作者 毛业兵 陈海军 傅玉聪 王涵 《四川大学学报(自然科学版)》 CAS CSCD 北大核心 2024年第2期81-87,共7页
为解决高精度转台的位置控制精度问题,以二维精密高速转台为研究对象,使用Adams软件建立转台动力学模型进行仿真分析,以固定角度驻留效果来评价模型精度,实现了动力学仿真与分析.为进一步提高模型驻留精度,采用Amesim软件和Adams软件开... 为解决高精度转台的位置控制精度问题,以二维精密高速转台为研究对象,使用Adams软件建立转台动力学模型进行仿真分析,以固定角度驻留效果来评价模型精度,实现了动力学仿真与分析.为进一步提高模型驻留精度,采用Amesim软件和Adams软件开展了联合仿真,由Adams软件负责传动计算求解,Amesim软件进行位置控制.相较于仅使用动力学模型进行仿真,联合模型的仿真结果相对误差在60°和120°的驻留分别减小到0.13%和0.09%,从模型精度上保证了联合模型在二维精密高速转台设计或改造上的准确性.最后对传动座样机进行测试,记录样机真实驻留角度,验证了联合模型的准确性和精度. 展开更多
关键词 adams 机电联合仿真 AMESIM
下载PDF
基于ADAMS的植保机操纵稳定性分析与研究
3
作者 高伟周 周敬东 +2 位作者 周天 阮晓松 杨力 《农机化研究》 北大核心 2024年第1期35-40,共6页
为改善自走式植保机的操纵稳定性,基于动力学软件ADAMS/Car模块建立植保机多体仿真模型,对植保机在不同速度行驶工况下的转向盘角阶跃输入性能及横摆角速度响应等评价指标进行了仿真。对仿真结果进行分析和实车试验验证,结果表明:利用AD... 为改善自走式植保机的操纵稳定性,基于动力学软件ADAMS/Car模块建立植保机多体仿真模型,对植保机在不同速度行驶工况下的转向盘角阶跃输入性能及横摆角速度响应等评价指标进行了仿真。对仿真结果进行分析和实车试验验证,结果表明:利用ADAMS/Car模块能恰当地分析和评价自走式植保机的操纵稳定性能,当车速为10m/s时,自走式植保机的操纵稳定性较好,可为动力分配控制系统优化奠定基础。 展开更多
关键词 自走式植保机 adams模型 操纵稳定性
下载PDF
基于ADAMS建模的海上航行横向干货补给姿态控制优化设计
4
作者 沈佳辉 胡泽众 严梅剑 《舰船科学技术》 北大核心 2024年第6期7-12,共6页
为解决海上航行横向干货补给物资安全上接收船的关键技术,通过多刚体系统动力学建模理论进行力学分析,运用ADAMS建立高架索补给系统的动力学模型。综合考虑海况、浪向、航速、站距以及接收站位置等信息,动态模拟航行横向干货补给作业流... 为解决海上航行横向干货补给物资安全上接收船的关键技术,通过多刚体系统动力学建模理论进行力学分析,运用ADAMS建立高架索补给系统的动力学模型。综合考虑海况、浪向、航速、站距以及接收站位置等信息,动态模拟航行横向干货补给作业流程,得到危险工况下的干货接收装置匹配性分析结果。并与传统静力学简化力学模型分析对比后,优化了航行横向干货补给设计工作。 展开更多
关键词 横向干货补给 adams 作业流程 匹配性分析
下载PDF
基于ADAMS的烟叶田间运输车防侧翻机构设计与仿真试验
5
作者 钱勤智 陈献勇 +5 位作者 郑仁富 刘昊 彭宇峰 罗浩 郑文鑫 张秀玲 《福建农机》 2024年第1期15-19,共5页
烟草是重要的经济作物。针对福建丘陵烟区烟叶采收后搬运劳动强度大的问题,结合福建烟田作业环境及烟草种植农艺,设计一款烟叶田间运输车。通过对烟叶运输车防侧翻关键部件的设计与力学分析,结合ADAMS运动学仿真与实地试验,得到烟叶运... 烟草是重要的经济作物。针对福建丘陵烟区烟叶采收后搬运劳动强度大的问题,结合福建烟田作业环境及烟草种植农艺,设计一款烟叶田间运输车。通过对烟叶运输车防侧翻关键部件的设计与力学分析,结合ADAMS运动学仿真与实地试验,得到烟叶运输车有防侧翻机构时最大侧翻稳定角的理论值、仿真值和试验值分别为41.7°、41.0°、39.5°,结果表明理论力学模型与仿真模型准确可靠,验证了烟叶运输车的防侧翻机构性能。该研究对丘陵烟田烟叶运输机械的研发具有一定的借鉴参考作用。 展开更多
关键词 烟叶运输 防侧翻 adams 运动学仿真
下载PDF
基于Adams与Isight的大型车辆双叉臂前悬架尺寸参数寻优
6
作者 关瑞 任学平 董志明 《内蒙古科技大学学报》 CAS 2024年第1期71-76,共6页
在Adams/Car创建双叉臂前悬架的虚拟样机模型,并进行仿真实验;将Adams集成到Isight中,进行灵敏度分析,获取对悬架性能参数影响较大的悬架硬点坐标。以此作为设计变量,以悬架的运动学性能作为响应,拟合得到几种不同的近似模型。利用Nsga... 在Adams/Car创建双叉臂前悬架的虚拟样机模型,并进行仿真实验;将Adams集成到Isight中,进行灵敏度分析,获取对悬架性能参数影响较大的悬架硬点坐标。以此作为设计变量,以悬架的运动学性能作为响应,拟合得到几种不同的近似模型。利用Nsga-II遗传算法进行优化,得到优化的悬架尺寸参数。使得悬架运动性能得到提高。 展开更多
关键词 双叉臂前悬架 adams/CAR 仿真分析 多目标优化
下载PDF
基于ADAMS的非独立后悬架定位参数仿真与优化
7
作者 李兆明 翁建生 《汽车实用技术》 2024年第1期131-135,共5页
为了解决前束角变化规律不合理,以及主销后倾角等变动范围较大的问题,文章应用ADAMS软件建立了某款运动型多用途汽车(SUV)的非独立后悬架ADAMS/Car模型,实验过程中对双轮实施同向跳动,分析后悬架定位参数的变化因素。运用ADAMS/Insight... 为了解决前束角变化规律不合理,以及主销后倾角等变动范围较大的问题,文章应用ADAMS软件建立了某款运动型多用途汽车(SUV)的非独立后悬架ADAMS/Car模型,实验过程中对双轮实施同向跳动,分析后悬架定位参数的变化因素。运用ADAMS/Insight模块进行硬点坐标优化,设计变量选取9个对悬架参数影响最大的因子(悬架的上、下控制臂前点坐标值和横向推力杆外端坐标值),优化目标选取车轮前束角、主销后倾角等5个悬架参数,对设计变量进行灵敏度分析,得到硬点坐标优化值。优化后的非独立后悬架性能在一定程度上得到改善,进一步提高了产品质量,在工程上对非独立后悬架的优化设计具有一定的参考意义。 展开更多
关键词 adams/CAR adams/Insight 硬点坐标 定位参数 非独立后悬架
下载PDF
基于ADAMS的势能驱动车凸轮设计
8
作者 李江波 吕玉波 +2 位作者 杨烜豪 王海鹏 龚航 《机械设计》 CSCD 北大核心 2024年第2期8-14,共7页
根据第七届全国大学生工程训练综合能力竞赛的命题要求,介绍一种逆向设计凸轮的方法,采用凸轮控制齿轮齿条机构实现势能驱动车转向功能。设计势能驱动车前轮理论轨迹,对势能驱动车的传动机构和转向机构进行分析设计并确定进行。采用ADAM... 根据第七届全国大学生工程训练综合能力竞赛的命题要求,介绍一种逆向设计凸轮的方法,采用凸轮控制齿轮齿条机构实现势能驱动车转向功能。设计势能驱动车前轮理论轨迹,对势能驱动车的传动机构和转向机构进行分析设计并确定进行。采用ADAMS建立的势能驱动车转向机构模型,通过规划前轮运动轨迹计算前轮转向所需角度,反推出齿轮齿条与凸轮接触点的位置关系,间接得到理论轮廓,进而通过UG包络处理得到实际轮廓。通过实物模型的制作与运行,势能驱动车全程轨迹重合度较好,验证了此方法的合理性。 展开更多
关键词 势能驱动车 齿轮齿条 adams 凸轮
下载PDF
基于AMESim和ADAMS的柱塞泵性能联合仿真研究
9
作者 董壮壮 王兆强 +3 位作者 陆阳钧 王金铂 孙令涛 高伟 《河南科技学院学报(自然科学版)》 2024年第1期73-84,共12页
柱塞副是斜盘式轴向柱塞泵最重要的摩擦副之一.为研究柱塞所受液压力时的动力学和运动学的关系,建立了柱塞泵的联合仿真模型.以A37斜盘式轴向柱塞泵为研究对象,通过对柱塞副进行运动学分析,建立柱塞副的三维几何模型,对三维模型施加运... 柱塞副是斜盘式轴向柱塞泵最重要的摩擦副之一.为研究柱塞所受液压力时的动力学和运动学的关系,建立了柱塞泵的联合仿真模型.以A37斜盘式轴向柱塞泵为研究对象,通过对柱塞副进行运动学分析,建立柱塞副的三维几何模型,对三维模型施加运动和力学关系约束,建立ADAMS虚拟样机的物理模型,获得了柱塞的位移、速度和加速度曲线.通过AMESim建立柱塞副液压模型,对柱塞泵的动力学模型和液压模型进行联合仿真,得到液压模型计算的柱塞腔内压力分布.虚拟仿真平台验证了动力学模型的正确性,能够真实模拟柱塞的受力和运动情况,为柱塞副的设计研究奠定了基础. 展开更多
关键词 轴向柱塞泵 adams AMESIM 联合仿真
下载PDF
基于ADAMS的某型冲锋枪自动机动力学仿真和分析
10
作者 张红勇 王智伟 《计算机测量与控制》 2024年第2期234-243,共10页
为研究某型冲锋枪自动机运动规律和动力学特性,进而探究导气孔大小对自动机运动循环的影响,首先使用UG软件建立该枪自动机的三维实体模型,其次在ADAMS软件中建立虚拟样机,利用Matlab软件对内弹道和导气室压力曲线进行拟合,对该枪的单发... 为研究某型冲锋枪自动机运动规律和动力学特性,进而探究导气孔大小对自动机运动循环的影响,首先使用UG软件建立该枪自动机的三维实体模型,其次在ADAMS软件中建立虚拟样机,利用Matlab软件对内弹道和导气室压力曲线进行拟合,对该枪的单发射击进行仿真,得到了枪机和枪机框的位移速度曲线、复进簧压力曲线等动力学特性,对比仿真结果与试验数据,说明虚拟样机模型具有较高的可行性,最后仿真分析导气孔大小对自动机运动循环的影响,仿真结果表明,随着导气孔直径增大,后坐速度和后坐撞击变大,复进到位速度明显提高,复进时间显著降低,自动循环时间相对缩减,为产品优化设计提供理论参考。 展开更多
关键词 冲锋枪 自动机 动力学 虚拟样机 adams
下载PDF
基于ADAMS的多关节机械手手抓部分的运动学仿真研究
11
作者 毛龙所 李峰 +3 位作者 白东华 吕忠 华卫 张敏 《中国设备工程》 2024年第8期133-135,共3页
利用虚拟样机技术验证多关节机械手的机构设计是否正确,能否实现每分钟的抓取以及其载荷。运用Solid Edge ST5完成虚拟样机三维模型的建立,导入ADAMS中进行机械手机械系统的运动学分析。运用ADAMS对其中一个工作周期内的运动过程进行运... 利用虚拟样机技术验证多关节机械手的机构设计是否正确,能否实现每分钟的抓取以及其载荷。运用Solid Edge ST5完成虚拟样机三维模型的建立,导入ADAMS中进行机械手机械系统的运动学分析。运用ADAMS对其中一个工作周期内的运动过程进行运动学的仿真,得出其各个关节在一个工作周期的位移特性曲线以及速度加速度曲线。本文介绍了多关节机械手具体的虚拟样机几何模型的建立,以及利用ADAMA/View提供的Parasolid模型数据交换接口导入模型,在添加约束时需要关键注意的细节也有介绍。在计算机广泛普及的今天,利用三维设计以及ADAMS软件进行机械手手抓部分的运动学分析,可以大大缩短设计周期,提高设计精度,降低产品开发成本。 展开更多
关键词 虚拟样机技术 adams 多关节机械手 运动学仿真 Solid Edge ST5
下载PDF
基于Adams/ncode整车车架疲劳寿命分析
12
作者 郑凯铭 徐小彬 《内燃机与配件》 2024年第7期9-11,共3页
车架作为货车的主要承载部件,承担来自货厢与货物的载荷,同时将该载荷通过悬挂系统传递到车桥和地面,不平的地面又通过轮胎和悬挂系统将载荷反馈到车架上,导致车架受力情况非常复杂,车架的破坏形式不仅有静强度破坏,还存在疲劳破坏。通... 车架作为货车的主要承载部件,承担来自货厢与货物的载荷,同时将该载荷通过悬挂系统传递到车桥和地面,不平的地面又通过轮胎和悬挂系统将载荷反馈到车架上,导致车架受力情况非常复杂,车架的破坏形式不仅有静强度破坏,还存在疲劳破坏。通过Adams建立整车动力学模型完成悬架与车架应力点的选取,建立路面工况,输出整车载荷谱。在寿命分析软件ncode中,结合有限元软件Ansys,对整车车架进行三工况下的静力分析,在ncode导入整车载荷谱的rsp格式,输出满载工况下车架疲劳寿命云图。 展开更多
关键词 车架 载荷谱 adams ncode 寿命分析
下载PDF
Computation Tree Logic Model Checking of Multi-Agent Systems Based on Fuzzy Epistemic Interpreted Systems
13
作者 Xia Li Zhanyou Ma +3 位作者 Zhibao Mian Ziyuan Liu Ruiqi Huang Nana He 《Computers, Materials & Continua》 SCIE EI 2024年第3期4129-4152,共24页
Model checking is an automated formal verification method to verify whether epistemic multi-agent systems adhere to property specifications.Although there is an extensive literature on qualitative properties such as s... Model checking is an automated formal verification method to verify whether epistemic multi-agent systems adhere to property specifications.Although there is an extensive literature on qualitative properties such as safety and liveness,there is still a lack of quantitative and uncertain property verifications for these systems.In uncertain environments,agents must make judicious decisions based on subjective epistemic.To verify epistemic and measurable properties in multi-agent systems,this paper extends fuzzy computation tree logic by introducing epistemic modalities and proposing a new Fuzzy Computation Tree Logic of Knowledge(FCTLK).We represent fuzzy multi-agent systems as distributed knowledge bases with fuzzy epistemic interpreted systems.In addition,we provide a transformation algorithm from fuzzy epistemic interpreted systems to fuzzy Kripke structures,as well as transformation rules from FCTLK formulas to Fuzzy Computation Tree Logic(FCTL)formulas.Accordingly,we transform the FCTLK model checking problem into the FCTL model checking.This enables the verification of FCTLK formulas by using the fuzzy model checking algorithm of FCTL without additional computational overheads.Finally,we present correctness proofs and complexity analyses of the proposed algorithms.Additionally,we further illustrate the practical application of our approach through an example of a train control system. 展开更多
关键词 Model checking multi-agent systems fuzzy epistemic interpreted systems fuzzy computation tree logic transformation algorithm
下载PDF
Conventional Geothermal Systems and Unconventional Geothermal Developments: An Overview
14
作者 Maryam Khodayar Sveinbjörn Björnsson 《Open Journal of Geology》 CAS 2024年第2期196-246,共51页
This paper provides an overview of conventional geothermal systems and unconventional geothermal developments as a common reference is needed for discussions between energy professionals. Conventional geothermal syste... This paper provides an overview of conventional geothermal systems and unconventional geothermal developments as a common reference is needed for discussions between energy professionals. Conventional geothermal systems have the heat, permeability and fluid, requiring only drilling down to °C, normal heat flow or decaying radiogenic granite as heat sources, and used in district heating. Medium-temperature (MT) 100°C - 190°C, and high-temperature (HT) 190°C - 374°C resources are mostly at plate boundaries, with volcanic intrusive heat source, used mostly for electricity generation. Single well capacities are °C - 500°C) and a range of depths (1 m to 20 Km), but lack permeability or fluid, thus requiring stimulations for heat extraction by conduction. HVAC is 1 - 2 m deep and shallow geothermal down to 500 m in wells, both capturing °C, with °C are either advanced by geothermal developers at <7 Km depth (Enhanced Geothermal Systems (EGS), drilling below brittle-ductile transition zones and under geothermal fields), or by the Oil & Gas industry (Advanced Geothermal Systems, heat recovery from hydrocarbon wells or reservoirs, Superhot Rock Geothermal, and millimeter-wave drilling down to 20 Km). Their primary aim is electricity generation, relying on closed-loops, but EGS uses fractures for heat exchange with earthquake risks during fracking. Unconventional approaches could be everywhere, with shallow geothermal already functional. The deeper and hotter unconventional alternatives are still experimental, overcoming costs and technological challenges to become fully commercial. Meanwhile, the conventional geothermal resources remain the most proven opportunities for investments and development. 展开更多
关键词 Conventional Geothermal systems Unconventional Geothermal Developments Shallow and Deep Closed-Loops Enhanced Geothermal systems Supercritical and Millimeter-Wave Drilling
下载PDF
基于ADAMS的六关节工业机器人模态仿真分析研究
15
作者 孔令超 钟成堡 王长恺 《机械制造与自动化》 2024年第2期182-187,共6页
针对工业机器人的动态特性,以六关节工业机器人为研究对象,应用有限元软件NASTRAN和多体动力学软件ADAMS搭建刚柔耦合模型,引入关节柔性,对其进行整机模态仿真分析方法的研究,采用试验模态分析法进行了模态测试。通过对比仿真和试验得到... 针对工业机器人的动态特性,以六关节工业机器人为研究对象,应用有限元软件NASTRAN和多体动力学软件ADAMS搭建刚柔耦合模型,引入关节柔性,对其进行整机模态仿真分析方法的研究,采用试验模态分析法进行了模态测试。通过对比仿真和试验得到前10阶固有频率和振型,其固有频率仿真相对误差控制在10%以内,振型基本保持一致,从而验证了六关节工业机器人整机模态仿真分析方法的准确性。进一步分析研究关节和关节臂刚性对机器人整机模态的影响规律,为整机刚柔耦合动力学分析、结构动态特性分析、结构优化设计和改进提供了一定的参考意义。 展开更多
关键词 工业机器人 关节柔性 刚柔耦合 模态分析 adams 刚性
下载PDF
Numerical simulation for the initial state of avalanche in polydisperse particle systems
16
作者 韩韧 李亭 +2 位作者 迟志鹏 杨晖 李然 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第2期405-412,共8页
Numerical simulation is employed to investigate the initial state of avalanche in polydisperse particle systems.Nucleation and propagation processes are illustrated for pentadisperse and triadisperse particle systems,... Numerical simulation is employed to investigate the initial state of avalanche in polydisperse particle systems.Nucleation and propagation processes are illustrated for pentadisperse and triadisperse particle systems,respectively.In these processes,particles involved in the avalanche grow slowly in the early stage and explosively in the later stage,which is clearly different from the continuous and steady growth trend in the monodisperse system.By examining the avalanche propagation,the number growth of particles involved in the avalanche and the slope of the number growth,the initial state can be divided into three stages:T1(nucleation stage),T2(propagation stage),T3(overall avalanche stage).We focus on the characteristics of the avalanche in the T2 stage,and find that propagation distances increase almost linearly in both axial and radial directions in polydisperse systems.We also consider the distribution characteristics of the average coordination number and average velocity for the moving particles.The results support that the polydisperse particle systems are more stable in the T2 stage. 展开更多
关键词 AVALANCHE initial state polydisperse particle systems PROPAGATION
下载PDF
Enhancing Security and Privacy in Distributed Face Recognition Systems through Blockchain and GAN Technologies
17
作者 Muhammad Ahmad Nawaz Ul Ghani Kun She +4 位作者 Muhammad Arslan Rauf Shumaila Khan Javed Ali Khan Eman Abdullah Aldakheel Doaa Sami Khafaga 《Computers, Materials & Continua》 SCIE EI 2024年第5期2609-2623,共15页
The use of privacy-enhanced facial recognition has increased in response to growing concerns about data securityand privacy in the digital age. This trend is spurred by rising demand for face recognition technology in... The use of privacy-enhanced facial recognition has increased in response to growing concerns about data securityand privacy in the digital age. This trend is spurred by rising demand for face recognition technology in a varietyof industries, including access control, law enforcement, surveillance, and internet communication. However,the growing usage of face recognition technology has created serious concerns about data monitoring and userprivacy preferences, especially in context-aware systems. In response to these problems, this study provides a novelframework that integrates sophisticated approaches such as Generative Adversarial Networks (GANs), Blockchain,and distributed computing to solve privacy concerns while maintaining exact face recognition. The framework’spainstaking design and execution strive to strike a compromise between precise face recognition and protectingpersonal data integrity in an increasingly interconnected environment. Using cutting-edge tools like Dlib for faceanalysis,Ray Cluster for distributed computing, and Blockchain for decentralized identity verification, the proposedsystem provides scalable and secure facial analysis while protecting user privacy. The study’s contributions includethe creation of a sustainable and scalable solution for privacy-aware face recognition, the implementation of flexibleprivacy computing approaches based on Blockchain networks, and the demonstration of higher performanceover previous methods. Specifically, the proposed StyleGAN model has an outstanding accuracy rate of 93.84%while processing high-resolution images from the CelebA-HQ dataset, beating other evaluated models such asProgressive GAN 90.27%, CycleGAN 89.80%, and MGAN 80.80%. With improvements in accuracy, speed, andprivacy protection, the framework has great promise for practical use in a variety of fields that need face recognitiontechnology. This study paves the way for future research in privacy-enhanced face recognition systems, emphasizingthe significance of using cutting-edge technology to meet rising privacy issues in digital identity. 展开更多
关键词 Facial recognition privacy protection blockchain GAN distributed systems
下载PDF
Analysis and Design of Time-Delay Impulsive Systems Subject to Actuator Saturation
18
作者 Chenhong Zhu Xiuping Han Xiaodi Li 《IEEE/CAA Journal of Automatica Sinica》 SCIE EI CSCD 2024年第1期196-204,共9页
This paper investigates the exponential stability and performance analysis of nonlinear time-delay impulsive systems subject to actuator saturation. When continuous dynamics is unstable, under some conditions, it is s... This paper investigates the exponential stability and performance analysis of nonlinear time-delay impulsive systems subject to actuator saturation. When continuous dynamics is unstable, under some conditions, it is shown that the system can be stabilized by a class of saturated delayed-impulses regardless of the length of input delays. Conversely, when the system is originally stable, it is shown that under some conditions, the system is robust with respect to sufficient small delayed-impulses. Moreover, the design problem of the controller with the goal of obtaining a maximized estimate of the domain of attraction is formulated via a convex optimization problem. Three examples are provided to demonstrate the validity of the main results. 展开更多
关键词 Delayed impulses impulsive control impulsive disturbance nonlinear systems SATURATION
下载PDF
Observer-based dynamic event-triggered control for distributed parameter systems over mobile sensor-plus-actuator networks
19
作者 穆文英 庄波 邱芳 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第4期237-243,共7页
We develop a policy of observer-based dynamic event-triggered state feedback control for distributed parameter systems over a mobile sensor-plus-actuator network.It is assumed that the mobile sensing devices that prov... We develop a policy of observer-based dynamic event-triggered state feedback control for distributed parameter systems over a mobile sensor-plus-actuator network.It is assumed that the mobile sensing devices that provide spatially averaged state measurements can be used to improve state estimation in the network.For the purpose of decreasing the update frequency of controller and unnecessary sampled data transmission, an efficient dynamic event-triggered control policy is constructed.In an event-triggered system, when an error signal exceeds a specified time-varying threshold, it indicates the occurrence of a typical event.The global asymptotic stability of the event-triggered closed-loop system and the boundedness of the minimum inter-event time can be guaranteed.Based on the linear quadratic optimal regulator, the actuator selects the optimal displacement only when an event occurs.A simulation example is finally used to verify that the effectiveness of such a control strategy can enhance the system performance. 展开更多
关键词 distributed parameter systems event-triggered control mobile sensors mobile actuators
下载PDF
Designing Proportional-Integral Consensus Protocols for Second-Order Multi-Agent Systems Using Delayed and Memorized State Information
20
作者 Honghai Wang Qing-Long Han 《IEEE/CAA Journal of Automatica Sinica》 SCIE EI CSCD 2024年第4期878-892,共15页
This paper is concerned with consensus of a secondorder linear time-invariant multi-agent system in the situation that there exists a communication delay among the agents in the network.A proportional-integral consens... This paper is concerned with consensus of a secondorder linear time-invariant multi-agent system in the situation that there exists a communication delay among the agents in the network.A proportional-integral consensus protocol is designed by using delayed and memorized state information.Under the proportional-integral consensus protocol,the consensus problem of the multi-agent system is transformed into the problem of asymptotic stability of the corresponding linear time-invariant time-delay system.Note that the location of the eigenvalues of the corresponding characteristic function of the linear time-invariant time-delay system not only determines the stability of the system,but also plays a critical role in the dynamic performance of the system.In this paper,based on recent results on the distribution of roots of quasi-polynomials,several necessary conditions for Hurwitz stability for a class of quasi-polynomials are first derived.Then allowable regions of consensus protocol parameters are estimated.Some necessary and sufficient conditions for determining effective protocol parameters are provided.The designed protocol can achieve consensus and improve the dynamic performance of the second-order multi-agent system.Moreover,the effects of delays on consensus of systems of harmonic oscillators/double integrators under proportional-integral consensus protocols are investigated.Furthermore,some results on proportional-integral consensus are derived for a class of high-order linear time-invariant multi-agent systems. 展开更多
关键词 Consensus protocol Hurwitz stability multi-agent systems quasi-polynomials time delay
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部