Abstraction of Small Signal Equivalent Circuit Parameters of Enhancement-Mode InGaP/AlGaAs/InGaAs PHEMT

An extraction method of the component parameter values of an enhancement-mode InGaP/AIGaAs/In-GaAs PHEMT small signal equivalent circuit is presented,and these component parameter values are extracted by using the EEHEMT1 model of IC-CAP software. The extraction results are verified by ADS software,and the DC I-V curves and S parameters simulated by ADS are basically accordant with those of the test results. These results indicate that the EEHEMT1 model can be used for extracting the component parameters of an enhancement-mode PHEMT.

Equivalent circuit with complex physical constants and equivalent-parameters-expressed dissipation factors of piezoelectric materials

The equivalent circuit with complex physical constants for a piezoelectric ceramic in thickness mode is established. In the equivalent circuit, electric components （equivalent circuit parameters） are connected to real and imaginary parts of complex physical coefficients of piezoelectric materials. Based on definitions of dissipation factors, three of them （dielectric, elastic and piezoelectric dissipation factors） are represented by equivalent circuit parameters. Since the equivalent circuit parameters are detectable, the dissipation factors can be easily obtained. In the experiments, the temperature and the stress responses of the three dissipation factors are measured.

UNFOLDING OF MULTIPARAMETER EQUIVARIANT BIFURCATION PROBLEMS WITH TWO GROUPS OF STATE VARIABLES UNDER LEFT-RIGHT EQUIVALENT GROUP

Based on the left_right equivalent relation of smooth map_germs in singularity theory, the unfoldings of multiparameter equivariant bifurcation problems with respect to left_right equivalence are discussed. The state variables of such an equivariant bifurcation problem were divided into two groups, in which the first can vary independently, while the others depend on the first in the varying process. By applying related methods and techniques in the unfolding theory of smooth map_germs, the necessary and sufficient condition for an unfolding of a multiparameter equivariant bifurcation problem with two groups of state variables to be versal is obtained.

An equivalent target plate damage probability calculation mathematics model and damage evaluation method

Aiming at the requirement of damage testing and evaluation of equivalent target plate based on the explosion of intelligent ammunition, this paper proposes a novel method for damage testing and evaluation method of circumferential equivalent target plate. Leveraging the dispersion characteristics parameters of fragment, we establish a calculation model of the fragment power situation and the damage calculation model under the condition of fragment ultimate penetration equivalent target plate. The damage model of equivalent target plate involves the fragment dispersion density, the local perforation damage criterion, the tearing damage model, and the damage probability. We use the camera to obtain the image of the equivalent target plate with fragment perforation, and research the algorithm of fragment distribution position recognition and fragment perforation area calculation method on the equivalent target plate by image processing technology. Based on the obtained parameters of the breakdown position and perforation area of fragments on equivalent target plate, we apply to damage calculation model of equivalent target plate, and calculate the damage probability of each equivalent target plate, and use the combined probabilistic damage calculation method to obtain the damage evaluation results of the circumferential equivalent target plate in an intelligent ammunition explosion experiment. Through an experimental testing, we verify the feasibility and rationality of the proposed damage evaluation method by comparison, the calculation results can reflect the actual damage effect of the equivalent target plate.

The statistical observation localized equivalent-weights particle filter in a simple nonlinear model

This paper presents an improved approach based on the equivalent-weights particle filter(EWPF)that uses the proposal density to effectively improve the traditional particle filter.The proposed approach uses historical data to calculate statistical observations instead of the future observations used in the EWPF’s proposal density and draws on the localization scheme used in the localized PF(LPF)to construct the localized EWPF.The new approach is called the statistical observation localized EWPF(LEWPF-Sobs);it uses statistical observations that are better adapted to the requirements of real-time assimilation and the localization function is used to calculate weights to reduce the effect of missing observations on the weights.This approach not only retains the advantages of the EWPF,but also improves the assimilation quality when using sparse observations.Numerical experiments performed with the Lorenz 96 model show that the statistical observation EWPF is better than the EWPF and EAKF when the model uses standard distribution observations.Comparisons of the statistical observation localized EWPF and LPF reveal the advantages of the new method,with fewer particles giving better results.In particular,the new improved filter performs better than the traditional algorithms when the observation network contains densely spaced measurements associated with model state nonlinearities.

An efficient approach for the equivalent linearization of frame structures with plastic hinges under nonstationary seismic excitations

An efficient approach is proposed for the equivalent linearization of frame structures with plastic hinges under nonstationary seismic excitations.The concentrated plastic hinges,described by the Bouc-Wen model,are assumed to occur at the two ends of a linear-elastic beam element.The auxiliary differential equations governing the plastic rotational displacements and their corresponding hysteretic displacements are replaced with linearized differential equations.Then,the two sets of equations of motion for the original nonlinear system can be reduced to an expanded-order equivalent linearized equation of motion for equivalent linear systems.To solve the equation of motion for equivalent linear systems,the nonstationary random vibration analysis is carried out based on the explicit time-domain method with high efficiency.Finally,the proposed treatment method for initial values of equivalent parameters is investigated in conjunction with parallel computing technology,which provides a new way of obtaining the equivalent linear systems at different time instants.Based on the explicit time-domain method,the key responses of interest of the converged equivalent linear system can be calculated through dimension reduction analysis with high efficiency.Numerical examples indicate that the proposed approach has high computational efficiency,and shows good applicability to weak nonlinear and medium-intensity nonlinear systems.

Equivalent-resistance based on the analysis of inductor-disconnected discharge behavior for intrinsic safety Buck converters

An Equivalent-Resistance based Analysis Method (ERAM) was proposed, which can convert the Inductor-Disconnected Discharge (IDD) behavior of the Intrinsically Safe Buck Converter (ISBC) into that of an Equivalent Simple-Inductive-Circuit (ESIC). According to the inductor disconnected equivalent circuit corresponding to the most dan- gerous operating case of the converter,the arc discharge time and the variation of out- put-voltage during the IDD were deduced based on the simple current linear attenuation model.According to the energy equivalence,the equivalent inductor-current of the ESIC was obtained.It is pointed out that although the inductor-current of the Buck converter is much lower than that of the published ignition curve,ignition still occurs and the ignition ability is strengthened with increase of the output capacitance.The proposed analyzing method is verified by the experiment results on IEC standard spark ignition apparatus.

Cost-Effective Monitoring of the Fuel Air Equivalence-Ratio with a Lambda Sensor and a Microcontroller in a Downdraft Biomass Gasifier

The operation of biomass treatment devices such as gasifiers is based on the control of key parameters that play an important role in product formation. These include: temperature, excess oxygen, relative humidity and biomass composition. This work focuses on excess oxygen and temperature. Unfortunately, flue gas oxygen analyzers are expensive and not accessible to small industries. However, the equivalence ratio is linked to excess oxygen and has the advantage of not depending on biomass composition. This study therefore focuses on the design and development of a device for controlling this equivalence ratio by measuring oxygen concentration using a self-propelled Lambda probe, and a system for monitoring this equivalence ratio using an Arduino Uno 3 microcontroller. The temperature is recorded with an accuracy of ±1.5°C. For a heating time of 10 minutes, the response time to temperature change is around 3 seconds, which is sufficient for the device to function properly. This simple device is an efficient and cost-effective means of checking the equivalence ratio.

Generalized-Extended-State-Observer and Equivalent-Input-Disturbance Methods for Active Disturbance Rejection: Deep Observation and Comparison

Active disturbance-rejection methods are effective in estimating and rejecting disturbances in both transient and steady-state responses.This paper presents a deep observation on and a comparison between two of those methods:the generalized extended-state observer(GESO)and the equivalent input disturbance(EID)from assumptions,system configurations,stability conditions,system design,disturbance-rejection performance,and extensibility.A time-domain index is introduced to assess the disturbance-rejection performance.A detailed observation of disturbance-suppression mechanisms reveals the superiority of the EID approach over the GESO method.A comparison between these two methods shows that assumptions on disturbances are more practical and the adjustment of disturbance-rejection performance is easier for the EID approach than for the GESO method.

Flutter Analysis of Aircraft Wing Using Equivalent-Plate Models with Orthogonal Polynomials

A method of equivalent simplification,using equivalent-plate models(EPMs),is developed.It is to achieve goals of rapid modeling and effective analysis in structural dynamics and flutter analysis of complex wing structures.It is on the assumption that the wing structures discussed are composed of skin,beams and ribs,and the different plate units(such as skin,beam web,rib web)are not distinguished in modeling,which is to avoid the complex pre-processing and make it more generalized.Taking the effect of transverse shear deformation into consideration,the equivalence is based on the first-order shear deformation theory,and it can import the model files of MSC/NASTRAN and process the information to accomplish the equivalent modeling.The Ritz method is applied with the Legendre polynomials,which is used to define the geometry,structure and displacements of the wing.Particularly,the selection of Legendre polynomials as trial functions brings good accuracy to the modeling and can avoid the ill-conditions.This is in contrast to the EPM method based on the classical plate theory.Through vibration and flutter analysis,the results obtained by using EPM agree well with those obtained by the finite element method,which indicates the accuracy and effectiveness in vibration and flutter analysis of the EPM method.

Effect of gas bubble on cell voltage oscillations based on equivalent circuit simulation in aluminum electrolysis cell

A method to investigate the effect of gas bubble on cell voltage oscillations was established. The whole aluminum electrolysis cell was treated as a resistance circuit, and the dynamic simulation of the cell equivalent circuit was modeled with Matlab/Simulink simulation software. The time-series signals of cell voltage and anode current were obtained under different bubble conditions, and analyzed by spectral and statistical analysis methods. The simulation results show that higher bubble release frequency has a significant effect on the cell voltage oscillations. When the bubble coverage of one anode block exceeds 80%, the cell voltage may exceed its normal fluctuation amplitude. The simulation also proves that the anode effect detected by computer in actual production is mainly the whole cell anode effect.

Equivalent Circuit Analysis of an RF Integrated Inductor with Ferrite Thin-Film

An equivalent circuit for a novel RF integrated inductor with ferrite thin-film is derived. The enhancement of the magnetic ferrite thin-film on the inductance （L） and quality factor （Q） of the inductor is analyzed. Circuit element parameters are extracted from RF measurements. Compared with the reference air-core inductor without magnetic film, L and Q of the ferrite thin-film inductor are 17% and 40% higher at 2GHz,respectively. Both the equivalent circuit analysis and test results demonstrate significant enhancement of the performance of RF integration inductors by ferrite thin-film integration.

Small-Signal Equivalent Circuit Modeling of a Photodetector Chip

A small-signal equivalent circuit model and the ted. The equivalent lumped circuit, which takes the main extraction techniques for photodetector chips are presen- factors that limit a photodetector＇s RF performance into consideration,is first determined based on the device＇s physical structure. The photodetector＇s S parameters are then on-wafer measured, and the measured raw data are processed with further calibration. A genetic algorithm is used to fit the measured data, thereby allowing us to calculate each parameter value of the model. Experimental resuits show that the modeled parameters are well matched to the measurements in a frequency range from 130MHz to 20GHz, and the proposed method is proved feasible. This model can give an exact description of the photodetector chip＇s high frequency performance,which enables an effective circuit-level prediction for photodetector and optoelectronic integrated circuits.

New text classification algorithm based on interdependence and equivalent radius

To improve the traditional classifying methods, such as vector space model （VSM）-based methods with highly complicated computation and poor scalability, a new classifying method （ called IER） is presented based on two new concepts： interdependence and equivalent radius. In IER, the attribute is selected according to the value of interdependence, and the classifying rule is based on equivalent radius and center of gravity. The algorithm analysis shows that IER is good at classifying a large number of samples with higher scalability and lower computation complexity. After several experiments in classifying Chinese texts, the conclusion is drawn that IER outperforms k-nearest neighbor （kNN） and classifcation based on the center of classes （CCC） methods, so IER can be used online to automatically classify a large number of samples while keeping higher precision and recall.

Lumped Equivalent Circuit of Planar Spiral Inductor for CMOS RFIC Application

A lumped π-type equivalent circuit of planar spiral inductor for CMOS RFIC application is developed by the domain decomposition method for conformal modules （DDM-CM）. Closed form expressions of lumped parameters for a square spiral inductor on a Si-SiO2 substrate are obtained and verified with the previously published experimental results.

车辆主动悬架自适应变论域T-S模糊控制研究

针对传统变论域模糊控制存在过度依赖专家经验、伸缩因子参数不能自适应调整的问题,提出一种车辆主动悬架自适应变论域T-S模糊控制策略,从而提高车辆的行驶平顺性。结合神经网络和T-S模糊推理建立基于自适应神经模糊推理的一阶T-S模糊控制器,利用神经网络的自学习特性产生完善的模糊规则,进而在传统函数型伸缩因子的基础上,将系统误差和误差变化率作为动态参数引入伸缩因子中,实现伸缩因子参数的自适应调整,解决了传统函数型伸缩因子因参数确定难度大导致控制效果差的问题。通过随机工况下的仿真分析和基于相似理论的缩尺实验,对所提出算法的有效性和工况自适应性进行了验证。结果表明,所提出的自适应变论域T-S模糊控制策略具有较强的工况适应性,在不同车速、路面激励下均可有效提高车辆的平顺性并保证轮胎接地安全性。

基于T-S模糊故障树的驱动电机冷却系统可靠性分析

车用驱动电机液压冷却系统存在故障机理不确定等问题。本文应用模糊数描述其故障概率和故障程度,建立驱动电机冷却系统的T-S模糊故障树模型,计算系统模糊可能性,分析各部件的概率重要度和关键重要度,找出影响系统可靠性的关键部件。

A Generic Calculation Model for Aircraft Single-hit Vulnerability Assessment Based on Equivalent Target

Aircraft single-hit vulnerability/survivability is usually expressed as the probability of kill or the vulnerable area in case of being given a random threat （e.g. a fragment） hit on the aircraft. In this paper, introducing the ＂equivalent target method＂ in lethality field into the aircraft vulnerability assessment, a generic vulnerability calculation model is proposed. In order for a good representation of reality, the model considers the threat change of state-of-motion during the threat penetrating into the components successively. Application shows that the proposed generic model has solved the Pk/h （probability of kill given by a hit on the component） calculation problem in aircraft vulnerability assessment, and is easier to be computerized than other commonly used models.

Equivalent Currents on an Anisotropic Material Backed by a Metal Surface and Their Relation

Based on a first-order state-vector differential equation representation of Maxwell's equations, an analytical formulation is derived for the equivalent currents on an anisotropic material backed by a metal surface, and the relation between two currents is also considered. These expressions are degenerated into the common forms for some simple cases. This effort will provide the theoretical preparation for the approximate calculation of electromagnetic scattering from a conducting object coated by an anisotropic material.

Rock burst risk evaluation based on equivalent surrounding rock strength

On-site investigations consistently show that the rock burst inherent to coal seams varies greatly with coal seam thickness.In this study,impact factors related to coal seam thickness and surrounding rock strength were analyzed and a corresponding rock burst risk assessment method was constructed.The model reflects the influence of coal seam thickness on the stress distribution of surrounding rock at the roadway.Based on the roadway excavation range,a stress distribution model of surrounding roadway rock is established and the influence of coal seam thickness on rock burst risk is analyzed accordingly.The proposed rock burst risk assessment method is based on the equivalent surrounding rock strength and coal seam bursting liability.The proposed method was tested in a 3500 mining area to find that it yields rock burst risk assessment results as per coal seam thickness that are in accordance with real-world conditions.The results presented here suggest that coal seam thickness is a crucial factor in effective rock burst risk assessment.