Parameter Design of Current Double Closed Loop for T-Type Three-Level Grid-Connected Inverter

To reduce current harmonics caused by switching frequency,T-type grid-connected inverter topology with LCL filter is adopted.In view of the disadvantages of the slow response speed of the traditional current control and the failure to eliminate the influence of the LCL filter on the grid-connected current by using current PI control alone,a current double closed loop PI current tracking control is proposed.Through the theoretical analysis of the grid-connected inverter control principle,the grid-connected inverter control model is designed,and the transfer functionmodel of each control link is deduced,and the current loop PI regulator is designed at last.The simulation results show that the control strategy is feasible.

Laparoscopic pancreatic duct incision and stone removal and T-type tube drainage for pancreatic duct stone: A case report and review of literature

To study a more micro-invasive procedure for patients having pancreatic duct stones(PDS).Till now,there has been no report of laparoscopic pancreatic duct incision and stone removal and T-type tube drainage for PDS in the English literature.An 82-year-old man suffered from subxiphoid pain associated with a dilated pancreatic duct(7 mm)containing one stone,but without a mass in the head of the pancreas.Laparoscopic pancreatic duct incision,stone removal,and T-type tube drainage were successfully performed without intraoperative or postoperative complications.An uneventful operation was performed with laparoscopically completed procedures in 160 min.The intraoperative loss of blood was around 50 mL.After patient a discharge on day 11,complete relief from the subxiphoid pain was reported at a follow-up visit 15 mo later.Laparoscopic pancreatic duct incision with stone removal and T-type tube drainage is applicable in carefully selected patients and can be effectively and safely used for the treatment of the abdominal pain of chronic pancreatitis.

Resistance Characteristics of Hydraulic Oil through Isodiametric T-type Duct with Sharp Corners

Rational determination and reduction of local energy loss of oil flow at pipe junctions are of important significance to improve hydraulic pipeline＇s work efficiency, especially for complex hydraulic pipeline connected by isodiametric T-type ducts with sharp comers to get combined and divided flow. From this point of view, the formulae of resistance loss for combined flow and divided flow through isodiametric T-type duct with sharp comers as well as the correlations of resistance loss coefficients in the branches of the duct are derived using energy method. On this basis, resistance characteristics of hydraulic oil in the duct are obtained by numerical simulation of different flow modes, which are commonly applied in hydraulic pipelines, using computational fluid dynamics （CFD） method, and the reasons for the resistance loss are analyzed based on the pressure change mechanism in the flow field. A part of simulation results was validated with the reference data. The research shows that for combined flows the resistance loss of symmetrical is lower than that of unsymmetrical to obtain low speed in common branch, but to gain high speed is quite the contrary, for divided flows, the symmetrical is always a reasonable choice to reduce resistance loss. These conclusions can be applied to optimize the design of hydraulic pipeline.

Locking compression plate+T-type steel plate for postoperative weight bearing and functional recovery in complex tibial plateau fractures

Complex tibial plateau fractures can seriously affect quality of life and physical and mental health of patients.The anatomical relationship between the proximal tibial bone and soft tissue is complex,resulting in different types of tibial plateau fractures.Violent trauma can lead to displaced fracture,serious soft tissue injury,and potentially,dislocation of the knee joint.Therefore,tibial plateau fractures are extremely unstable.AIM To assess the use of locking compression plate(LCP)+T-type steel plate for postoperative weight bearing and functional recovery of complex tibial plateau fractures.METHODS Ninety-seven patients with complex tibial plateau fractures who underwent surgery at our hospital were selected for retrospective study.Forty-nine patients had been treated with LCP+T-type steel plate limited internal fixation(study group),and 48 patients with bilateral ordinary steel plate support(control group).The operation process index,postoperative rehabilitation related index,Rasmussen score of the knee joint,tibial plateau varus angle(TPA),tibial plateau retroversion angle(PA),and surgical complications of the two groups were compared.RESULTS The operation time and intraoperative bone graft volume in the study group were lower than those in the control group(P<0.05).There were no significant differences in surgical bleeding,anterior external incision length,postoperative drainage,hospital stay duration,and fracture healing time between the groups(P>0.05).There was no significant difference in the TPA and PA angle between the groups immediately and 18 mo after surgery(P>0.05).At 12 mo after surgery,the Rasmussen scale score was higher in the study group than in the control group(P<0.05).There was no significant difference in the Rasmussen scale score at 18 mo after surgery,and the radiology score at 12 and 18 mo after surgery,between the two groups(P>0.05).The postoperative complication rate in the study group(3.77%)was lower than that in the control group(15.09%;P<0.05).CONCLUSION LCP+T-type steel plate internal fixation has advantages in terms of minimizing trauma and enabling early postoperative functional exercise,promoting functional recovery and lower limb weight-bearing,and reducing postoperative complications.

Inhibitory actions of mibefradil on steroidogenesis in mouse Leydig cells： involvement of Ca^2＋ entry via the T-type Ca^2＋ channel

Intracellular cAMP and Ca^2＋ are involved in the regulation of steroidogenic activity in Leydig cells, which coordinate responses to luteinizing hormone （LH） and human ehorionic gonadotropin （hCG）. However, the identification of Ca^2＋ entry implicated in Leydig cell steroidogenesis is not well defined. The objective of this study was to identify the type of Ca^2＋ channel that affects Leydig cell steroidogenesis. In vitro steroidogenesis in the freshly dissociated Leydig cells of mice was induced by hCG incubation. The effects of mibefradil （a putative T-type Ca^2＋ channel blocker） on steroidogenesis were assessed using reverse transcription （RT）-polymerase chain reaction analysis for the steroidogenic acute regulatory protein （STAR） mRNA expression and testosterone production using radioimmunoassay. In the presence of 1.0 mmol L-1 extracellular Ca^2＋, hCG at 1 to 100 IU noticeably elevated both StAR mRNA level and testosterone secretion （P 〈 0.05）, and the stimulatory effects of hCG were markedly diminished by mibefradil in a dose-dependent manner （P 〈 0.05）. Moreover; the hCG-induced increase in testosterone production was completely removed when external Ca^2＋ was omitted, implying that Ca entry is needed for hCG-induced steroidogenesis. Furthermore, a patch-clamp study revealed the presence of mibefradil-sensitive Ca^24- currents seen at a concentration range that nearly paralleled those inhibiting steroidogenesis. Collectively, Our data provide evidence that hCG-stimulated steroidogenesis is mediated at least in part by Ca^2＋ entry carried out by the T-type Ca^2＋ channel in the Leydig cells of mice.

Ultra wideband CMOS digital T-type attenuator with low phase errors

A proposed inductive-phase-compensation ultra wideband CMOS digital T-type attenuator design based on an analysis of minimising phase errors is presented in this letter.In a standard CMOS technology,the proposed attenuator is analytically demonstrated to have low phase errors due to the inductive-phase-compensation network.A design equation is inferred and a wide-band 4dB attenuation bit digital attenuator with low phase errors is designed as a test vehicle for the proposed approach.

Actuating mechanism and design of a T-type linear ultrasonic motor

To take advantage of merits of higher output-power and efficiency of bolt-clamped transducer,a T-type linear ultrasonic motor was proposed in this paper.The proposed motor contained a horizontal transducer and a vertical transducer.The horizontal transducer included two exponential shape horns,and the vertical transducer contained one exponential shape horn.And the horns intersected at tip ends where a driving foot was located.The longitudinal vibrations of transducers were excited by the stretching vibration of PZT ceramics.Longitudinal vibrations were superimposed in the motor and generated elliptical trajectory at the driving foot.The actuating mechanism of the proposed motor was analyzed.The two working modals of the motor were gained with FEM.The resonant frequencies of two working modals were degenerated by adjusting the structural parameters.The motion trajectory of nodes on the driving foot was gained by transient analysis.The vibration amplitude of node on the driving foot indicates that the proposed motor has potential good output characteristics.The results verify the feasibility of the proposed design and provide instructions for the development of the new ultrasonic motor.

Design and Implementation of a Three-Phase Active T-Type NPC Inverter for Low-Voltage Microgrids

This paper presents the design and implementation of a 3 kVA three-phase active T-type neutral-point clamped (NPC) inverter with GaN power devices for low-voltage microgrids. The designed inverter is used in a battery-based energy system (BESS) for power conversion optimization in applications to low-voltage microgrids. A modular design method has been developed for the design and implementation of the AT-NPC inverter. Experimental verification has been carried out based on a 3-kW three-phase T-Type NPC grid-connected inverter. FPGA based digital control technique has been developed for the current control of the three-level three-phase grid inverter. A maximum efficiency of 98.49% has been achieved within a load range from 50% to 75%.

T-type calcium channel expression in cultured human neuroblastoma cells

Human neuroblastoma cells （SH-SY5Y） have similar structures and functions as neural cells and have been frequently used for cell culture studies of neural cell functions.Previous studies have revealed L-and N-type calcium channels in SH-SY5Y cells.However,the distribution of the low-voltage activated calcium channel （namely called T-type calcium channel,including Cav3.1,Cav3.2,and Cav3.3） in SH-SY5Y cells remains poorly understood.The present study detected mRNA and protein expres-sion of the T-type calcium channel （Cav3.1,Cav3.2,and Cav3.3） in cultured SH-SY5Y cells using real-time polymerase chain reaction （PCR） and western blot analysis.Results revealed mRNA and protein expression from all three T-type calcium channel subtypes in SH-SY5Y cells.Moreover,Cav3.1 was the predominant T-type calcium channel subtype in SH-SY5Y cells.

The numerical simulation of Pacific Ocean circulation with five-level model

A five-level oceanic primitive equation model has been developed. This model is integrated numerically with annual mean wind stress and heat flux at sea surface for 30 a. The ocean circulations tend to quasi-stability. The simulated results show that the computed annual mean currents and sea surface temperature agree well with the observations.

Effect of Phase Modulation on Electromagnetically Induced Grating in a Five-Level M-Type Atomic System

We theoretically investigate the phenomena of electromagnetically induced grating in an M-type five-level atomic system. It is found that a weak field can be effectively diffracted into high-order directions using a standing wave coupling field, and different depths of the phase modulation can disperse the diffraction light into different orders. When the phase modulation depth is approximated to the orders of π, 2π and 3π, the first-, second- and third-order diffraction intensity reach the maximum, respectively. Thus we can take advantage of the phase modulation to control the probe light dispersing into the required high orders.

Macrophage migration inhibitory factor decreased T-type Ca^(2+) channel current through activating Src

Aims T-type Ca2+ current(ICaT)plays an important role in the pathogenesis of atrial fibrillation（AF）.The present study sought to investigate the role of Macrophage migration inhibitory factor（MIF）,a pleiotropic cytokine,in the regulation of T-type Ca2+ channel in atrium myocytes.Methods We used whole-cell voltage-clamp technique and biochemical assays to study the regulation and expression of ICa,T in mouse atrium myocytes（HL-1 cells）.Results Serum MIF concentrations was slightly increased in patients with AF compared to sinus rhythm（SR） controls.In cultured HL-1 cells, significant amounts of MIF were produced in response to hydrogen peroxide（H2O2）,but not AngiotensinⅡ（AngⅡ）. Mouse recombinant MIF（rMIF）（20 or 40 nM,24 h） suppressed peak ICa,T by-38%and-60%in a concentration-dependent manner,impaired the voltage-dependent activation of ICa,T,and down-regulated of TCC alG mRNA.Src inhibitors genistein and PPl significantly enhanced ICaT.The depression of ICa,T induced by rMIF could be reversed by genistein and PP1.Conclusions MIFis involved in the pathogenesis of AF,probably by decreasing ICa,T through impairment of the channel function and activation of c-Src kinases in atrium myocytes.

A combined pig model to determine the net absorption of volatile fatty acids in the large intestine under different levels of crude fiber

Background:This study aimed to develop a combined model to quantify the net absorption of volatile fatty acids(VFA)in the large intestine(LI)of pigs.Methods:Fifteen female growing pigs(Duroc×Large White×Landrace)were ranked by body weight(30±2.1 kg)on day 0 and assigned to one of three treatments,namely the basal diet containing different crude fiber(CF)levels(LCF:3.0%CF,MCF:4.5%CF,and HCF:6.0%CF).The pigs were implanted with the terminal ileum fistula and the cannulation of the ileal mesenteric vein(IMV),portal vein(PV),and left femoral artery(LFA)from days 6 to 7.[13 C]-Labeled VFA and P-aminohippuric acid were constantly perfused into the terminal ileum fistula and the cannulation of the IMV(day 15),respectively.Blood samples were collected from the PV and the LFA during perfusion(5 h),and LI samples were collected.Results:The net flux of[12 C]-acetic acid in the PV was greater for LCF versus MCF(p=0.045),but no difference was observed in the net flux of[12 C]-propionic acid(p=0.505)and[12 C]-butyric acid(p=0.35)in the PV among treatments.The deposition of[12 C]-acetic acid in the LI was greater for LCF versus MCF(p=0.014),whereas the deposition of[12 C]-propionic acid(p=0.007)and[12 C]-butyric acid(p=0.037)in the LI was greater for LCF versus HCF.Conclusions:In conclusion,this pig model was found conducive to study the net absorption of VFAs in the LI,and LCF had more net absorption of VFAs in the LI than MCF and HCF.

多电平变换器的一种参考电压矢量自校正策略

对于多电平变换器而言,常见的电路拓扑结构有二极管箝位型、飞跨电容型、级联H桥型和T型等,这些拓扑都有着较多的开关状态、控制目标和非线性问题,使得PWM调制的参考电压矢量指令出现偏差。本文首先从T型三电平变换器开始,在矢量空间中,总结死区时电压矢量偏差的计算规律,根据相应电压矢量的位置和幅值,得出了一种参考电压矢量指令的自适应校正方法。接着以四电平二极管箝位拓扑和T型五电平拓扑为例,对这一方法的应用进行分析。该方法可抑制器件的死区效应,并解决传统PWM脉冲整形时所出现的脉冲损失或饱和问题。本文通过设定电压误差与开关状态的关系函数,进一步得出这一方法的广义校正通式,实现了参考电压矢量指令的改良。实验结果验证了算法的有效性。

T型H桥级联多电平变换器的改进型脉宽调制策略

针对T型H桥级联变换器的拓扑结构及其调制策略进行分析和研究,提出了基于载波移相脉宽调制(CPS-PWM)的改进型调制策略。以单极倍频CPS-PWM所得的虚拟五电平波形作为T型H桥的输出目标,结合T型H桥变换器输出不同电平时的开关模式,遵循"改变最少个数开关管状态来实现输出电平改变"原则,逆向推导T型H桥变换器的PWM信号,并在此基础上给出基于T型H桥单元级联多电平变换器的调制策略。搭建了基于T型H桥级联的单相静止同步补偿器(STATCOM)样机,分析了T型H桥上、下电容均压策略,最后通过仿真和实验结果验证所提调制策略以及电容均压策略的正确性和可行性。

新型Z源T型五电平逆变器及其调制策略

针对传统二极管中点钳位三电平与五电平逆变器需要大量钳位二极管、结构复杂、可靠性差、二极管开关损耗较大,以及传统Z源两电平逆变器电容电压应力较高、升压能力不足、功率较低等问题。首先,提出了一种T型五电平逆变器拓扑,该拓扑省去了大量钳位二极管,结构简单,开关损耗小,功率等级高;其次,结合Z源网络与该T型五电平拓扑,得到一种新型Z源T型五电平逆变器拓扑,与传统Z源逆变器相比,在相同的电压增益下,该新型逆变器有效降低了开关器件电压与电容电压;再次,将Z源网络中的电感用升压单元代替,进一步增强了其升压能力;最后,设计了该新型逆变器的同向载波调制策略。仿真实验证明了所提拓扑的正确性与调制策略的有效性。

论面向21世纪大学生成才之要诀

“人才，干部是世界上所有宝贵的资本中最宝贵最有决定意义的资本。”①人才问题，是关系到一个国家民族的强弱兴衰，关系到一项事业进退成败的重大问题。治国安邦靠人才，经济腾飞靠人才，成就事业更要靠人才，古今中外莫不如此。在我国，春秋战国时期的秦国后来居上，统...

An Efficient Fuzzy Logic Fault Detection and Identification Method of Photovoltaic Inverters

Fuzzy logic control(FLC)systems have found wide utilization in several industrial applications.This paper proposes a fuzzy logic-based fault detection and identification method for open-circuit switch fault in grid-tied photovoltaic(PV)inverters.Large installations and ambitious plans have been recently achieved for PV systems as clean and renewable power generation sources due to their improved environmental impacts and availability everywhere.Power converters represent the main parts for the grid integration of PV systems.However,PV power converters contain several power switches that construct their circuits.The power switches in PV systems are highly subjected to high stresses due to the continuously varying operating conditions.Moreover,the grid-tied systems represent nonlinear systems and the system model parameters are changing continuously.Consequently,the grid-tied PV systems have a nonlinear factor and the fault detection and identification(FDI)methods based on using mathematical models become more complex.The proposed fuzzy logic-based FDI(FL-FDI)method is based on employing the fuzzy logic concept for detecting and identifying the location of various switch faults.The proposed FL-FDI method is designed and extracted from the analysis and comparison of the various measured voltage/current components for the control purposes.Therefore,the proposed FL-FDI method does not require additional components or measurement circuits.Additionally,the proposed method can detect the faulty condition and also identify the location of the faulty switch for replacement and maintenance purposes.The proposed method can detect the faulty condition within only a single fundamental line period without the need for additional sensors and/or performing complex calculations or precise models.The proposed FL-FDI method is tested on the widely used T-type PV inverter system,wherein there are twelve different switches and the FDI process represents a challenging task.The results shows the superior and accurate performance of the proposed FL-FDI method.

Prying Force Calculation and Design Method for T-shaped Tensile Connector with High Strength Bolt

In order to establish the design method for T-shaped tensile connector with high strength bolt,the theoretical analysis is carried out. Firstly,it analyzes the performance of the connector and establishes prying force calculation model. Based on the model,prying force equation and function between bolt prying force and flange thickness is derived,and the min and max thickness requirement of flange plate under a certain tension load is then obtained. Finally,two simplified design methods of the connector are proposed,which are bolt pulling capacity method and flange plate bending capacity method.

Calcium channels and iron uptake into the heart

Iron overload can lead to iron deposits in many tissues,particularly in the heart.It has also been shown to be associated with elevated oxidative stress in tissues.Elevated cardiac iron deposits can lead to iron overload cardiomyopathy,a condition which provokes mortality due to heart failure in iron-overloaded patients.Currently,the mechanism of iron uptake into cardiomyocytes is still not clearly understood.Growing evidence suggests L-type Ca2+channels(LTCCs)as a possible pathway for ferrous iron(Fe2+)uptake into cardiomyocytes under iron overload conditions.Nevertheless,controversy still exists since some findings on pharmacological interventions and those using different cell types do not support LTCC’s role as a portal for iron uptake in cardiac cells.Recently,T-type Ca2+channels (TTCC)have been shown to play an important role in the diseased heart.Although TTCC and iron uptake in cardiomyocytes has not been investigated greatly,a recent finding indicated that TTCC could be an important portal in thalassemic hearts.In this review,comprehensive findings collected from previous studies as well as a discussion of the controversy regarding iron uptake mechanisms into cardiomyocytes via calcium channels are presented with the hope that understanding the cellular iron uptake mechanism in cardiomyocytes will lead to improved treatment and prevention strategies,particularly in iron-overloaded patients.