Thermodynamics in a quantum corrected Reissner-Nordstr?m-AdS black hole and its GUP-corrections

We calculate the thermodynamic quantities in the quantum corrected Reissner-Nordstr?m-AdS(RN-AdS)black hole,and examine their quantum corrections.By analyzing the mass and heat capacity,we give the critical state and the remnant state,respectively,and discuss their consistency.Then,we investigate the quantum tunneling from the event horizon of massless scalar particle by using the null geodesic method,and charged massive boson W^(±)and fermions by using the Hamilton-Jacob method.It is shown that the same Hawking temperature can be obtained from these tunneling processes of different particles and methods.Next,by using the generalized uncertainty principle(GUP),we study the quantum corrections to the tunneling and the temperature.Then the logarithmic correction to the black hole entropy is obtained.

High-order corrections to the radiation-free dynamics of an electron in the strongly radiation-dominated regime

A system of reduced equations is proposed for electron motion in the strongly radiation-dominated regime for an arbitrary electromagnetic field configuration.The approach developed here is used to analyze various scenarios of electron dynamics in this regime:motion in rotating electric and magnetic fields and longitudinal acceleration in a plane wave and in a plasma wakefield.The results obtained show that this approach is able to describe features of electron dynamics that are essential in certain scenarios,but cannot be captured in the framework of the original radiation-free approximation[Samsonov et al.,Phys.Rev.A 98,053858(2018)and A.Gonoskov and M.Marklund,Phys.Plasmas 25,093109(2018)].The results are verified by numerical integration of the nonreduced equations of motion with account taken of radiation reaction in both semiclassical and fully quantum cases.

Adaptation analysis and fusion correction method of CMIP6 precipitation simulation data on the Qinghai-Tibetan Plateau

In order to obtain more accurate precipitation data and better simulate the precipitation on the Tibetan Plateau,the simulation capability of 14 Coupled Model Intercomparison Project Phase 6(CMIP6)models of historical precipitation(1982-2014)on the Qinghai-Tibetan Plateau was evaluated in this study.Results indicate that all models exhibit an overestimation of precipitation through the analysis of the Taylor index,temporal and spatial statistical parameters.To correct the overestimation,a fusion correction method combining the Backpropagation Neural Network Correction(BP)and Quantum Mapping(QM)correction,named BQ method,was proposed.With this method,the historical precipitation of each model was corrected in space and time,respectively.The correction results were then analyzed in time,space,and analysis of variance(ANOVA)with those corrected by the BP and QM methods,respectively.Finally,the fusion correction method results for each model were compared with the Climatic Research Unit(CRU)data for significance analysis to obtain the trends of precipitation increase and decrease for each model.The results show that the IPSL-CM6A-LR model is relatively good in simulating historical precipitation on the Qinghai-Tibetan Plateau(R=0.7,RSME=0.15)among the uncorrected data.In terms of time,the total precipitation corrected by the fusion method has the same interannual trend and the closest precipitation values to the CRU data;In terms of space,the annual average precipitation corrected by the fusion method has the smallest difference with the CRU data,and the total historical annual average precipitation is not significantly different from the CRU data,which is better than BP and QM.Therefore,the correction effect of the fusion method on the historical precipitation of each model is better than that of the QM and BP methods.The precipitation in the central and northeastern parts of the plateau shows a significant increasing trend.The correlation coefficients between monthly precipitation and site-detected precipitation for all models after BQ correction exceed 0.8.

Correction: Surface Patterning of Metal ZincElectrode with an In-Region Zincophilic Interfacefor High-Rate and Long-Cycle-Life Zinc MetalAnode

Correction to:Nano-Micro Letters(2024)16:112 https://doi.org/10.1007/s40820-024-01327-2 In the supplementary information the following corrections have been carried out:1.Institute of Energy and Climate Research,Materials Synthesis and Processing,Forschungszentrum Jülich GmbH,52425 Jülich,Germany.Corrected:Institute of Energy and Climate Research:Materials Synthesis and Processing(IEK-1),Forschungszentrum Jülich GmbH,52425 Jülich,Germany.

Correction to:Error Calculation of Large-Amplitude Internal Solitary Waves Within the Pycnocline Introduced by the Strong Stratification Approximation

In the original publication the third author name is published incorrectly as“Hayatdavoodi Masoud”.The correct author name should be read as“Masoud Hayatdavoodi”.The correct author name is available in this correction.

Using WGM2012 to Compute Gravity Anomaly Corrections of Leveling Observations in China

Gravity Anomaly Correction(GAC)is a very important term in leveling data processing.In most cases,it is troublesome for field surveyors to measure gravity when leveling.In this paper,based on the complete Bouguer Gravity Anomaly(BGA)map of WGM2012,the feasibility of replacing in-situ gravity surveying in China is investigated.For leveling application,that is to evaluate the accuracy of WGM2012 in China.Because WGM2012 is organized with a standard rectangle grid,two interpolation methods,bilinear interpolating and Inverse Distance Weighted(IDW)interpolating,are proposed.Four sample areas in China,i.e.,Hanzhong,Chengdu,Linzhi and Shantou,are selected to evaluate the systems bias and precision of WGM2012.Numerical results show the average system bias of WGM2012 BGA in west China is about-100.1 mGal(1 mGal=10^(-5) m/s^(2))and the standard deviation is about 30.7 mGal.Tests in Shantou indicate the system bias in plain areas is about-130.4 mGal and standard deviation is about 6.8 mGal.All these experiments means the accuracy of WGM2012 is limited in high mountain areas of western China,but in plain areas,such as Shantou,WGM2012 BGA map is quite good for most leveling applications after calibrating the system bias.

Corrective-Net:面向多标签文本分类的标签关联学习模块

在目前的多标签文本分类任务中,主要面临以下2个问题:(1)侧重文本表示学习,对标签之间的关联信息建模不充分;(2)尽管使用了标签关联信息来改善多标签分类任务,但对标签关联的建模过于依赖人工预定义的外部知识,而外部知识的获取成本高昂,限制了其实际应用。针对以上问题,提出了一种面向多标签文本分类的标签关联学习模块Corrective-Net。该模块可以在不依赖外部知识的前提下,自动学习数据中的标签关联信息;同时,它还可以利用标签关联信息,对基础分类模块的初始预测结果进行修正,使得最终预测兼顾语义信息和标签关联信息,以获得更精准的多标签预测结果。在AAPD和SO数据集上的大量实验表明,Corrective-Net具有通用性和有效性,通过分析标签修正对各个标签性能的影响,得到了显式的标签关联信息,并进行了可视化。

The application of the strip-shaped cymba conchae orthosis in the nonsurgical correction of complex auricular deformity

Objective: This study aims to evaluate the efficacy and safety of using a strip-shaped cymba conchae orthosis for the nonsurgical correction of complex auricular deformities. Methods: Clinical data were collected from 2020 to 2021 for 6 patients who underwent correction using a stripshaped cymba conchae orthosis. The indications, corrective effects, and complications associated with use of the orthosis were analyzed. Results: There were four indications for treatment: cryptotia with helix adhesion;cryptotia with grade I microtia;cryptotia with excessive helix thickness;and auricular deformity beyond the treatment time window(≥6 months). Excellent corrective effects were observed in all 6 patients. Complications occurred in one patient, who recovered after symptomatic treatment. Conclusion: The use of a strip-shaped cymba conchae orthosis alone or combined with a U-shaped helix orthosis presents a feasible approach for correcting complex auricular deformities or deformities beyond the treatment time window in pediatric patients.

Methodology for local correction of the heights of global geoid models to improve the accuracy of GNSS leveling

At present,one of the methods used to determine the height of points on the Earth’s surface is Global Navigation Satellite System(GNSS)leveling.It is possible to determine the orthometric or normal height by this method only if there is a geoid or quasi-geoid height model available.This paper proposes the methodology for local correction of the heights of high-order global geoid models such as EGM08,EIGEN-6C4,GECO,and XGM2019e_2159.This methodology was tested in different areas of the research field,covering various relief forms.The dependence of the change in corrected height accuracy on the input data was analyzed,and the correction was also conducted for model heights in three tidal systems:"tide free","mean tide",and"zero tide".The results show that the heights of EIGEN-6C4 model can be corrected with an accuracy of up to 1 cm for flat and foothill terrains with the dimensionality of 1°×1°,2°×2°,and 3°×3°.The EGM08 model presents an almost identical result.The EIGEN-6C4 model is best suited for mountainous relief and provides an accuracy of 1.5 cm on the 1°×1°area.The height correction accuracy of GECO and XGM2019e_2159 models is slightly poor,which has fuzziness in terms of numerical fluctuation.

Automatic Miscalibration Detection and Correction of LiDAR and Camera Using Motion Cues

This paper aims to develop an automatic miscalibration detection and correction framework to maintain accurate calibration of LiDAR and camera for autonomous vehicle after the sensor drift.First,a monitoring algorithm that can continuously detect the miscalibration in each frame is designed,leveraging the rotational motion each individual sensor observes.Then,as sensor drift occurs,the projection constraints between visual feature points and LiDAR 3-D points are used to compute the scaled camera motion,which is further utilized to align the drifted LiDAR scan with the camera image.Finally,the proposed method is sufficiently compared with two representative approaches in the online experiments with varying levels of random drift,then the method is further extended to the offline calibration experiment and is demonstrated by a comparison with two existing benchmark methods.

Assessing the Performance of a Dynamical Downscaling Simulation Driven by a Bias-Corrected CMIP6 Dataset for Asian Climate

In this study,we aim to assess dynamical downscaling simulations by utilizing a novel bias-corrected global climate model(GCM)data to drive a regional climate model(RCM)over the Asia-western North Pacific region.Three simulations were conducted with a 25-km grid spacing for the period 1980–2014.The first simulation(WRF_ERA5)was driven by the European Centre for Medium-Range Weather Forecasts Reanalysis 5(ERA5)dataset and served as the validation dataset.The original GCM dataset(MPI-ESM1-2-HR model)was used to drive the second simulation(WRF_GCM),while the third simulation(WRF_GCMbc)was driven by the bias-corrected GCM dataset.The bias-corrected GCM data has an ERA5-based mean and interannual variance and long-term trends derived from the ensemble mean of 18 CMIP6 models.Results demonstrate that the WRF_GCMbc significantly reduced the root-mean-square errors(RMSEs)of the climatological mean of downscaled variables,including temperature,precipitation,snow,wind,relative humidity,and planetary boundary layer height by 50%–90%compared to the WRF_GCM.Similarly,the RMSEs of interannual-tointerdecadal variances of downscaled variables were reduced by 30%–60%.Furthermore,the WRF_GCMbc better captured the annual cycle of the monsoon circulation and intraseasonal and day-to-day variabilities.The leading empirical orthogonal function(EOF)shows a monopole precipitation mode in the WRF_GCM.In contrast,the WRF_GCMbc successfully reproduced the observed tri-pole mode of summer precipitation over eastern China.This improvement could be attributed to a better-simulated location of the western North Pacific subtropical high in the WRF_GCMbc after GCM bias correction.

Do They Pose a Danger:Evaluation of the Recidivism Characteristics in China’s Community Corrections?

The modern criminal justice system includes community corrections,which play a preventive role in lowering recidivism among offenders.However,some offenders continue to commit crimes during community corrections.This research focuses on community corrections in Chinese community policing practice,particularly offender recidivism.The study collected a total of 500 questionnaires from offenders in the provincial administrative regions of northern China,which included first offense status,psychological status,and recidivism behavior.The study found that most recidivists are usually arrested for“drunk driving”,which may be related to their ability to exercise self-restraint,and that alcohol may contribute to their deviant behavior.Another important finding relates to young recidivists,who may have difficulty securing employment during community corrections and thus use crime again to gain income.In general,this study explores the offender population in Chinese community corrections practice and discusses the factors within it that influence offender recidivism.This may support law enforcement agencies in further evaluating the effectiveness of community corrections,and may provide new information for understanding community corrections in China.

Balancing act:The dilemma of rapid hyperglycemia correction in diabetes management

The global diabetes surge poses a critical public health challenge,emphasizing the need for effective glycemic control.However,rapid correction of chronic hyperglycemia can unexpectedly trigger microvascular complications,necessitating a reevaluation of the speed and intensity of glycemic correction.Theories suggest swift blood sugar reductions may cause inflammation,oxidative stress,and neurovascular changes,resulting in complications.Healthcare providers should cautiously approach aggressive glycemic control,especially in long-standing,poorly controlled diabetes.Preventing and managing these complications requires a personalized,comprehensive approach with education,monitoring,and interdisciplinary care.Diabetes management must balance short and longterm goals,prioritizing overall well-being.This editorial underscores the need for a personalized,nuanced approach,focusing on equilibrium between glycemic control and avoiding overcorrection.

Chord length sampling correction analysis for dispersion fuel in Monte Carlo simulation

Dispersion fuels,knowned for their excellent safety performance,are widely used in advanced reactors,such as hightemperature gas-cooled reactors.Compared with deterministic methods,the Monte Carlo method has more advantages in the geometric modeling of stochastic media.The explicit modeling method has high computational accuracy and high computational cost.The chord length sampling(CLS)method can improve computational efficiency by sampling the chord length during neutron transport using the matrix chord length?s probability density function.This study shows that the excluded-volume effect in realistic stochastic media can introduce certain deviations into the CLS.A chord length correction approach is proposed to obtain the chord length correction factor by developing the Particle code based on equivalent transmission probability.Through numerical analysis against reference solutions from explicit modeling in the RMC code,it was demonstrated that CLS with the proposed correction method provides good accuracy for addressing the excludedvolume effect in realistic infinite stochastic media.

Single Photon Detection Technology in Underwater Wireless Optical Communication:Modulation Modes and Error Correction Coding Analysis

This study explores the application of single photon detection(SPD)technology in underwater wireless optical communication(UWOC)and analyzes the influence of different modulation modes and error correction coding types on communication performance.The study investigates the impact of on-off keying(OOK)and 2-pulse-position modulation(2-PPM)on the bit error rate(BER)in single-channel intensity and polarization multiplexing.Furthermore,it compares the error correction performance of low-density parity check(LDPC)and Reed-Solomon(RS)codes across different error correction coding types.The effects of unscattered photon ratio and depolarization ratio on BER are also verified.Finally,a UWOC system based on SPD is constructed,achieving 14.58 Mbps with polarization OOK multiplexing modulation and 4.37 Mbps with polarization 2-PPM multiplexing modulation using LDPC code error correction.

Atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering correction

In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detector following atmospheric transmission.To quantitatively analyze the effects of different satellite detection altitudes,burst heights,and transmission angles on the physical processes of X-ray transport and energy fluence,we developed an atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering correction.The proposed method is an improvement over the traditional analytical method that only computes direct-transmission X-rays.The traditional analytical method exhibits a maximum relative error of 67.79% compared with the Monte Carlo method.Our improved method reduces this error to within 10% under the same conditions,even reaching 1% in certain scenarios.Moreover,its computation time is 48,000 times faster than that of the Monte Carlo method.These results have important theoretical significance and engineering application value for designing satellite-borne nuclear detonation pulsed X-ray detectors,inverting nuclear detonation source terms,and assessing ionospheric effects.

采用B1-corrected variable-flip-angle(VFA)的定量动态增强MRI在乳腺良恶性病变的研究`

目的探讨采用B1-corrected VFA技术的定量动态增强(Dynamic Contrast Enhancement,DCE)MRI在乳腺良恶性鉴别诊断中的价值。方法前瞻性研究本院63例乳腺疾病患者,行3.0 T DCE-MR检查,结合B1-corrected VFA技术获得T1值,在此基础上计算出DCE-MRI定量参数:容量转移常数(Ktrans)、速率常数(Kep)和血管外细胞外间隙容积比(Ve),对乳腺恶性、良性及正常腺体组获得的定量参数行Kruskal-Wallis检验;最后绘制ROC(receiver operating characteristic curve,ROC)曲线。结果恶性肿瘤组Ktrans、Kep、Ve中位数(最小值最大值)分别为0.010(0.0010.118)min-1、0.145(0.0020.863)min-1、0.058(0.0020.611);良性病变组Ktrans、Kep、Ve中位数为0.238(0.0090.740)min-1、0.365(0.0201.012)min-1、0.517(01810.923);正常腺体组Ktrans、Kep、Ve中位数为0.812(0.1212.352)min-1、1.147(0.3282.363)min-1、0.712(0.4041.183)。Kruskal-Wallis检验显示三组间Ktrans、Kep、Ve P<0.05,均有统计学意义;良恶性组间、恶性与正常组间的Ktrans、Kep、Ve差异有统计学意义,而良性和正常组之间的Ve值无统计学意义。三者AUC分别为0.875、0.957、0.707,三者判断乳腺良恶性变的Ktrans、Kep、Ve敏感度分别为93.8%、97.9%、45.8%;特异度分别为66.7%、86.73%、86.7%。结论结合B1-corrected VFA序列测量的3.0T DCE-MRI参数Ktrans、Kep、Ve可以反映乳腺良恶性病变的血流灌注特征,可用于乳腺病变良恶性的鉴别诊断。

A Multi-Objective Optimization for Locating Maintenance Stations and Operator Dispatching of Corrective Maintenance

In this study,we introduce a novel multi-objective optimization model tailored for modern manufacturing,aiming to mitigate the cost impacts of operational disruptions through optimized corrective maintenance.Central to our approach is the strategic placement of maintenance stations and the efficient allocation of personnel,addressing a crucial gap in the integration of maintenance personnel dispatching and station selection.Our model uniquely combines the spatial distribution of machinery with the expertise of operators to achieve a harmonious balance between maintenance efficiency and cost-effectiveness.The core of our methodology is the NSGA Ⅲ+Dispatch,an advanced adaptation of the Non-Dominated Sorting Genetic Algorithm Ⅲ(NSGA-Ⅲ),meticulously designed for the selection of maintenance stations and effective operator dispatching.This method integrates a comprehensive coding process,crossover operator,and mutation operator to efficiently manage multiple objectives.Rigorous empirical testing,including a detailed analysis from a Taiwan Residents electronic equipment manufacturer,validated the effectiveness of our approach across various scenarios of machine failure frequencies and operator configurations.The findings reveal that the proposed model significantly outperforms current practices by reducing response times by up to 23%in low-frequency and 28.23%in high-frequency machine failure scenarios,leading to notable improvements in efficiency and cost reduction.Additionally,it demonstrates significant improvements in oper-ational efficiency,particularly in selective high-frequency failure contexts,while ensuring substantial manpower cost savings without compromising on operational effectiveness.This research significantly advances maintenance strategies in production environments,providing the manufacturing industry with practical,optimized solutions for diverse machine malfunction situations.Furthermore,the methodologies and principles developed in this study have potential applications in various other sectors,including healthcare,transportation,and energy,where maintenance efficiency and resource optimization are equally critical.

Research on aiming methods for small sample size shooting tests of two-dimensional trajectory correction fuse

The longitudinal dispersion of the projectile in shooting tests of two-dimensional trajectory corrections fused with fixed canards is extremely large that it sometimes exceeds the correction ability of the correction fuse actuator.The impact point easily deviates from the target,and thus the correction result cannot be readily evaluated.However,the cost of shooting tests is considerably high to conduct many tests for data collection.To address this issue,this study proposes an aiming method for shooting tests based on small sample size.The proposed method uses the Bootstrap method to expand the test data;repeatedly iterates and corrects the position of the simulated theoretical impact points through an improved compatibility test method;and dynamically adjusts the weight of the prior distribution of simulation results based on Kullback-Leibler divergence,which to some extent avoids the real data being"submerged"by the simulation data and achieves the fusion Bayesian estimation of the dispersion center.The experimental results show that when the simulation accuracy is sufficiently high,the proposed method yields a smaller mean-square deviation in estimating the dispersion center and higher shooting accuracy than those of the three comparison methods,which is more conducive to reflecting the effect of the control algorithm and facilitating test personnel to iterate their proposed structures and algorithms.;in addition,this study provides a knowledge base for further comprehensive studies in the future.

Positron Emission Tomography Lung Image Respiratory Motion Correcting with Equivariant Transformer

In addressing the challenge of motion artifacts in Positron Emission Tomography (PET) lung scans, our studyintroduces the Triple Equivariant Motion Transformer (TEMT), an innovative, unsupervised, deep-learningbasedframework for efficient respiratory motion correction in PET imaging. Unlike traditional techniques,which segment PET data into bins throughout a respiratory cycle and often face issues such as inefficiency andoveremphasis on certain artifacts, TEMT employs Convolutional Neural Networks (CNNs) for effective featureextraction and motion decomposition.TEMT’s unique approach involves transforming motion sequences into Liegroup domains to highlight fundamental motion patterns, coupled with employing competitive weighting forprecise target deformation field generation. Our empirical evaluations confirm TEMT’s superior performancein handling diverse PET lung datasets compared to existing image registration networks. Experimental resultsdemonstrate that TEMT achieved Dice indices of 91.40%, 85.41%, 79.78%, and 72.16% on simulated geometricphantom data, lung voxel phantom data, cardiopulmonary voxel phantom data, and clinical data, respectively. Tofacilitate further research and practical application, the TEMT framework, along with its implementation detailsand part of the simulation data, is made publicly accessible at https://github.com/yehaowei/temt.