Positive corona burst pulses are an unstable pulse mode.They appear in a small range of the onset stage,and their current pulses result from the collective movement of charged species.This paper focused on the connect...Positive corona burst pulses are an unstable pulse mode.They appear in a small range of the onset stage,and their current pulses result from the collective movement of charged species.This paper focused on the connections between these pulses and the collective movement of charged species.The movement of species is divided into four parts with respect to time:the(1)initial growth of species,(2)formation and development of the streamer region and negative ion sheath,(3)dead time(the time interval between the pulses),and(4)rapid re-growth of species.The movement of the species in the four parts and the correspondence with the current pulse were analyzed.The numerical results indicated the following:the rapid rising of the species matched the rising edge of the pulses,the streamer region,and negative ion sheath appeared in the falling edge of the primary pulse,and the rapid re-growth of species matched the re-ignition of the pulses.The results were in qualitative agreement with deductions and experimental observations in the literature.展开更多
Suppression of stress and crack generation during picosecond laser processing in transparent brittle materials such as glass was successfully demonstrated by a picosecond laser pulse with temporal energy modulation.Th...Suppression of stress and crack generation during picosecond laser processing in transparent brittle materials such as glass was successfully demonstrated by a picosecond laser pulse with temporal energy modulation.The origin of deterioration in processing accuracy could be interpreted in terms of the discontinuous movement of plasma in the vicinity of the focus.To reveal the effectiveness of the temporal energy modulation for smootli machining,such plasma motion was simulated by the fiidtc-d ifference time-domain method.F urt her more,photoinduced birefringence was observed using a high-speed polarization camera.展开更多
Thomson scattering (TS), as a popular and reliable diagnostic technique, has successfully measured electron temperatures and electron number densities of plasmas for many years. However, conventional TS techniques usi...Thomson scattering (TS), as a popular and reliable diagnostic technique, has successfully measured electron temperatures and electron number densities of plasmas for many years. However, conventional TS techniques using Nd:YAG lasers operate only at tens of hertz. Here, we present the development of a high-repetition-rate TS instrument based on a high-speed, pulse-burst laser system to greatly increase the temporal resolution of measurements. Successful instrument prototype testing was carried out by collecting TS light from laboratory helium and argon plasmas at 10 kHz. Calibration of the instrument detection sensitivity using nitrogen/ oxygen rotational Raman scattering signal is also presented. Quantitative electron number densities and electron temperatures of the plasma were acquired at 10 kHz, for stable plasma discharges as, respectively,~0.9 eV and ~5.37×10^21 m^-3 for the argon plasma, and ~1 eV and ~6.5×10^21 m^-3 for the helium plasma.展开更多
Bursts of GHz repetition rate pulses involve more ablation mechanisms than single femtosecond pulses.Efficient ablation by GHz laser pulses is a multi-step process,consisting of a first thermal incubation phase,follow...Bursts of GHz repetition rate pulses involve more ablation mechanisms than single femtosecond pulses.Efficient ablation by GHz laser pulses is a multi-step process,consisting of a first thermal incubation phase,followed by a highly efficient ablation phase.GHz ablation therefore combines thermal and non-thermal ablation mechanisms.With an optimal choice of the burst duration,the ablation efficiency can be highly enhanced.Long bursts,comprising tens of pulses to hundreds of pulses,are needed to take full advantage of the increase in ablation efficiency.展开更多
A cascade glow discharge in atmospheric helium was excited by a microsecond voltage pulse and a pulse-modulated radio frequency(RF) voltage, in which the discharge ignition dynamics of the RF discharge burst was inves...A cascade glow discharge in atmospheric helium was excited by a microsecond voltage pulse and a pulse-modulated radio frequency(RF) voltage, in which the discharge ignition dynamics of the RF discharge burst was investigated experimentally. The spatio-temporal evolution of the discharge, the ignition time and optical emission intensities of plasma species of the RF discharge burst were investigated under different time intervals between the pulsed voltage and RF voltage in the experiment. The results show that by increasing the time interval between the pulsed discharge and RF discharge burst from 5 μs to 20 μs, the ignition time of the RF discharge burst is increased from 1.6 μs to 2.0 μs, and the discharge spatial profile of RF discharge in the ignition phase changes from a double-hump shape to a bell-shape. The light emission intensity at 706 nm and 777 nm at different time intervals indicates that the RF discharge burst ignition of the depends on the number of residual plasma species generated in the pulsed discharges.展开更多
基金supported by National Natural Science Foundation of China(No.51907145)。
文摘Positive corona burst pulses are an unstable pulse mode.They appear in a small range of the onset stage,and their current pulses result from the collective movement of charged species.This paper focused on the connections between these pulses and the collective movement of charged species.The movement of species is divided into four parts with respect to time:the(1)initial growth of species,(2)formation and development of the streamer region and negative ion sheath,(3)dead time(the time interval between the pulses),and(4)rapid re-growth of species.The movement of the species in the four parts and the correspondence with the current pulse were analyzed.The numerical results indicated the following:the rapid rising of the species matched the rising edge of the pulses,the streamer region,and negative ion sheath appeared in the falling edge of the primary pulse,and the rapid re-growth of species matched the re-ignition of the pulses.The results were in qualitative agreement with deductions and experimental observations in the literature.
文摘Suppression of stress and crack generation during picosecond laser processing in transparent brittle materials such as glass was successfully demonstrated by a picosecond laser pulse with temporal energy modulation.The origin of deterioration in processing accuracy could be interpreted in terms of the discontinuous movement of plasma in the vicinity of the focus.To reveal the effectiveness of the temporal energy modulation for smootli machining,such plasma motion was simulated by the fiidtc-d ifference time-domain method.F urt her more,photoinduced birefringence was observed using a high-speed polarization camera.
基金supported by the US Department of Energy’s STTR program under Grant No.DE-SC0018672(Program Manager:Dr Matthew Lanctot)
文摘Thomson scattering (TS), as a popular and reliable diagnostic technique, has successfully measured electron temperatures and electron number densities of plasmas for many years. However, conventional TS techniques using Nd:YAG lasers operate only at tens of hertz. Here, we present the development of a high-repetition-rate TS instrument based on a high-speed, pulse-burst laser system to greatly increase the temporal resolution of measurements. Successful instrument prototype testing was carried out by collecting TS light from laboratory helium and argon plasmas at 10 kHz. Calibration of the instrument detection sensitivity using nitrogen/ oxygen rotational Raman scattering signal is also presented. Quantitative electron number densities and electron temperatures of the plasma were acquired at 10 kHz, for stable plasma discharges as, respectively,~0.9 eV and ~5.37×10^21 m^-3 for the argon plasma, and ~1 eV and ~6.5×10^21 m^-3 for the helium plasma.
文摘Bursts of GHz repetition rate pulses involve more ablation mechanisms than single femtosecond pulses.Efficient ablation by GHz laser pulses is a multi-step process,consisting of a first thermal incubation phase,followed by a highly efficient ablation phase.GHz ablation therefore combines thermal and non-thermal ablation mechanisms.With an optimal choice of the burst duration,the ablation efficiency can be highly enhanced.Long bursts,comprising tens of pulses to hundreds of pulses,are needed to take full advantage of the increase in ablation efficiency.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11875104 and 12175036)。
文摘A cascade glow discharge in atmospheric helium was excited by a microsecond voltage pulse and a pulse-modulated radio frequency(RF) voltage, in which the discharge ignition dynamics of the RF discharge burst was investigated experimentally. The spatio-temporal evolution of the discharge, the ignition time and optical emission intensities of plasma species of the RF discharge burst were investigated under different time intervals between the pulsed voltage and RF voltage in the experiment. The results show that by increasing the time interval between the pulsed discharge and RF discharge burst from 5 μs to 20 μs, the ignition time of the RF discharge burst is increased from 1.6 μs to 2.0 μs, and the discharge spatial profile of RF discharge in the ignition phase changes from a double-hump shape to a bell-shape. The light emission intensity at 706 nm and 777 nm at different time intervals indicates that the RF discharge burst ignition of the depends on the number of residual plasma species generated in the pulsed discharges.