TEM Analysis on YBCO Composited Superconducting Tapes

The microstructures of the YBCO composited superconducting tapes with different J_c were analysed by TEM.The relationship between microstructure and J_c of the tapes is discussed in detail.It is demonstrated that J_c value of the tapes increases significantly with the decrease in the width of grain boundary,increase of the twin density and the reducing of the amount of precipitates at grain boundary.At grain boundary of the tapes,howev- er,small amount of non-superconducting phases can-not be avoided.For the fabrication of high J_c YBCO com- posited tapes,it is very important to improve the microstructure of the superconductor perfectly.

Experimental and numerical analyses of magnesium alloy hot workability

Due to their hexagonal crystal structure,magnesium alloys have relatively low workability at room temperature.In this study,the hot workability behavior of cast-extruded AZ31B magnesium alloy is studied through hot compression testing,numerical modeling and microstructural analyses.Hot deformation tests are performed at temperatures of 250℃ to 400℃ under strain rates of 0.01 to 1.0 s^(−1).Transmission electron microscopy is used to reveal the presence of dynamic recrystallization(DRX),dynamic recovery(DRY),cracks and shear bands.To predict plastic instabilities during hot compression tests of AZ31B magnesium alloy,the authors use Johnson–Cook damage model in a 3D finite element simulation.The optimal hot workability of magnesium alloy is found at a temperature(T)of 400℃ and strain rate(ε)of 0.01 s^(−1).Stability is found at a lower strain rate,and instability is found at a higher strain rate.

Computer Simulation of Carbide Transformation in Die Steel for Plastic

Thermo-Calc software package (TCP+DICTRA) was used to simulate the carbide transformation process in die steel for plastic. Combined with TEM analysis, the calculated result confirms that the carbide in equilibrium state is M_7C_3 carbide. The dissolution of M_7C_3 carbide in steel is predicted by DICTRA program. It was shown that the temperature remarkably affects the dissolution process of M_7C_3 carbide, but the influence of alloy elements such as manganese and molybdenum can be neglected in this steel.

Pilot-Scale Production of Lyophilized Inactivated Rabies Vaccine Candidate in Vero Cells under Fully Animal Component-Free Conditions Using Microcarrier Technology and Laboratory Animal Trials

The upstream process was carried out in an animal component-free medium on Cytodex 1 microcarriers. Recombinant trypsin is a non-animal derived protease used as an alternative to animal-derived trypsin. To inactivate recombinant trypsin, a soybean trypsin inhibitor (STI) should be added to the medium. A protocol was first tested in T-flasks and then passaged to 500 mL and 3 L spinner flasks. Cell detachment was completed in 10 - 12 min, and 0.4 g/L STI was added to a 3L spinner, and cells were transferred into a 30 L stirred tank bioreactor. On day 5, the cell density had reached its maximum (around 1.8 × 106 cells/mL). At an MOI of 0.3 with serum-free medium conditions, cell infection yielded a maximal rabies virus titer of 1.82 × 107 FFU/mL at 5 days. All cell culture conditions and virus growth kinetics in serum-free media were investigated. In conclusion, Vero cells were grown on Cytodex 1 with serum-free media and a high amount of rabies virus was obtained. A mouse challenge was used to determine the immune response to an inactivated rabies virus vaccine candidate. Also, we evaluated inactive rabies vaccine candidate safety, and immunogenicity in mice, sheep, horses, and cattle. We found that no horses, sheep, or cattle who were given vaccine IM at 3.2 IU/dose exhibited any clinical sign of disease and all developed high VNA titers (up to 10.03 IU/mL) by 3 - 4 WPI. After the accelerated stability studies, the lyophilized inactivated rabies vaccine candidate showed enough antigenic potency (2.6 IU/mL) in the mouse challenge test. Also, 18-month long-term stability studies showed enough immune response (1.93 IU/mL) on day 14. The activity of the vaccine candidate showed a good immune response and safety criteria that meet WHO requirements. This is the first pilot-scale mammalian cell-based viral rabies vaccine production study in Türkiye that used microcarriers.

Induced structural modifications in ZnS nanowires via physical state of catalyst:Highlights of 15R crystal phase

Peculiar and unique growth mechanisms involved in semiconductor nanowires(NWs)pave the way to the achievement of new crystallographic phases and remarkable material properties,and hence,studying polytypism in semiconductor NWs arouses a strong interest for the next generation of electronic and photonic applications.In this context,the growth of ZnS nanowires has been investigated,as bulk ZnS compound exhibits numerous unstable polytypes at high temperatures,but their stable occurrence is highly anticipated in a nanowire due to its special quasi-dimensional shape and growth modes.In this work,the idea is to provide a change in the growth mechanism via the physical state of catalyst droplet(liquid or solid)and hence,study the induced structural modifications in ZnS nanowires.The HRTEM images of VLS(via liquid alloyed catalyst)grown ZnS NWs show periodic stacking faults,which is precisely identified as a stacking sequence of cubic or hexagonal individual planes leading to an astonishing 15R crystal polymorph.This crystallographic phase is observed for the first time in nanowires.Contrastingly,NWs grown with VSS(via solid catalyst)show crystal polytypes of zinc blende and wurtzite.We calculate and discuss the role of cohesive energies in the formation of such ZnS polytypes.Further,we present the selection rules for the crystallization of such 15R structure in NWs and discuss the involved VLS and VSS growth mechanisms leading to the formation of different crystal phases.