Growth of two-inch free-standing heteroepitaxial diamond on Ir/YSZ/Si(001)substrates via laser-patterned templates

As an ultra-wide bandgap semiconductor,diamond garners significant interest due to its exceptional physical properties^([1–3]).These superior characteristics make diamonds highly promising for applications in power electronics^([4]),deep-ultraviolet detectors^([5]),high-energy particle detectors^([6]),and quantum devices based on color centers^([7]).

Preparation of Manganese Oxide Hollow Spheres Using pH-responsive Microgels as Templates

Manganese oxide hollow spheres were prepared by a novel and facile approach using pH- responsive microgels as templates. The final products were thoroughly characterized with X-ray powder diffraction, thermogravimetric analysis, scanning electron microscopy, Fourier transform infrared, and transmission electron microscopy. The results reveal that the shell thickness of manganese oxide hollow spheres increased with the dosage of KMnO4, which implies that a controllable and feasible strategy for manganese oxide hollow spheres prepa- ration has been established. Further studies on the microgels template showed some of them had an irreversible swelling/deswelling transition due to the uneven cross-link extent. Based on the results, a probable formation mechanism for the hollow spheres was proposed.

A color based face detection system using multiple templates

A color based system using multiple templates was developed and implem ented for detecting human faces in color images. The algorithm consists of three image processing steps. The first step is human skin color statistics. Then it separates skin regions from non-skin regions. After that, it locates the fronta l human face(s) within the skin regions. In the first step, 250 skin samples from persons of different ethnicities are used to determine the color distribution o f human skin in chromatic color space in order to get a chroma chart showing lik elihoods of skin colors. This chroma chart is used to generate, from the origina l color image, a gray scale image whose gray value at a pixel shows its likelih ood of representing the skin. The algorithm uses an adaptive thresholding proces s to achieve the optimal threshold value for dividing the gray scale image into separate skin regions from non skin regions. Finally, multiple face templates ma tching is used to determine if a given skin region represents a frontal human fa ce or not. Test of the system with more than 400 color images showed that the re sulting detection rate was 83%, which is better than most color-based face dete c tion systems. The average speed for face detection is 0.8 second/image (400×300 pixels) on a Pentium 3 (800MHz) PC.

Composition Templates in English Writing of the College Entrance Examination

In recent years,more and more students relay on universal composition templates.Students believe that the"universal composition template"can cope with all kinds of English tests.How the pros and cons of writing methods seem to put things right once and for all?How’s enlightening significance to English teaching?In this paper,based on the two language acquisition theory and analyze the advantages and disadvantages of the composition template,some suggestion are given to the students to improve their English writing level.

Mass-Stiffness Templates for Cubic Structural Elements Dedicated to Professor Karl Stark Pister for his 95th birthday

1 This paper considers Lagrangian finite elements for structural dynamics constructed with cubic displacement shape functions.The method of templates is used to investigate the construction of accurate mass-stiffness pairs.This method introduces free parameters that can be adjusted to customize elements according to accuracy and rank-sufficiency criteria.One-and two-dimensional Lagrangian cubic elements with only translational degrees of freedom(DOF)carry two additional nodes on each side,herein called side nodes or SN.Although usually placed at the third-points,the SN location may be adjusted within geometric limits.The adjustment effect is studied in detail using symbolic computations for a bar element.The best SN location is taken to be that producing accurate approximation to the lowest natural frequencies of the continuum model.Optimality is investigated through Fourier analysis of the propagation of plane waves over a regular infinite lattice of bar elements.Focus is placed on the acoustic branch of the frequency-vs.-wavenumber dispersion diagram.It is found that dispersion results using the fully integrated consistent mass matrix(CMM)are independent of the SN location whereas its lowfrequency accuracy order is O(κ8),whereκis the dimensionless wave number.For the diagonally lumped mass matrix(DLMM)constructed through the HRZ scheme,two optimal SN locations are identified,both away from third-points and of accuracy order O(κ8).That with the smallest error coefficient corresponds to the Lobatto 4-point integration rule.A special linear combination of CMM and DLMM with nodes at the Lobatto points yields an accuracy of O(κ10)without any increase in the computational effort over CMM.The effect of reduced integration(RI)on both mass and stiffness matrices is also studied.It is shown that singular mass matrices can be constructed with 2-and 3-point RI rules that display the same optimal accuracy of the exactly integrated case,at the cost of introducing spurious modes.The optimal SN location in two-dimensional,bicubic,isoparametric plane stress quadrilateral elements is briefly investigated by numerical experiments.The frequency accuracy of flexural modes is found to be fairly insensitive to that position,whereas for bar-like modes it agrees with the one-dimensional results.

NEURAL REGENERATION RESEARCH TEMPLATES

INVITED ARTICLESInvited Reviews -Submit an outline for your manuscript before writing and submit the manuscript within 2 months after receiving permission from NRR editorial com- mittee.

NEURAL REGENERATION RESEARCH TEMPLATES

Invited Reviews-Submit an outline for your manuscript before writing and submit the manuscript within 2 months after receiving permission from NRR editorial committee.

3-8 Surface Plasmonic Spectroscopy Revealing the Oxidation Dynamics of Copper Nanowires Embedded in Polycarbonate Ion-track Templates

Metallic nanowires have attracted enormous attention since they open up exciting applications in the fields of electronics, plasmonics, sensors, green energy, and many more. Due to the large surface-area-to-volume ratio, however, they show enhanced chemical activity compared to their bulk counterparts and therefore are more easily susceptible to oxidization.

Synthesis and Solid Phase Extraction Performance Study of NNAL-specific Molecularly Imprinted Polymers Using Dummy Templates

Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.

Preparation of Poly(3-hydroxybutyrate) Porous Films by Microemulsion Templates Method

Porous poly(3 hydroxybutyrate)(PHB) membranes were prepared by microemulsion templates. The influence of microemulsion templates on pore size and porosity of the PHB membranes were studied. Preliminary studies showed that the pore size made by microemulsion templates were smaller and were estimated in the range of 100~500 nanometer. In this research, the ultraviolet/visible light spectrometer was applied in the investigation of H 2O/Span85 Tween60/chloroform reserve microemulsion. Surfactant content(P) and water content(R) were optimized. Furthermore, the effects of variation of P and R on the pore size and porosity of PHB films were discussed.

Japanese-Chinese Machine Translation of Japanese Determiners Based on Templates

The machine translation of Japanese sentences with determiners,like“shi­ka...nai”,“tyoutto...dakedeha”,“tada...dake”and so on,are more special and regular on sentences structure.The research collects and classifies the Japanese sentences which contain the determiners.The classification is carried out by according to the characteristics of Japanese sentences and translation habit of Chinese sentences.Through further abstraction and sim­plification,translation templates are extracted by gathering grammar rules information,studying syntax and analysis the collocation mode of sentenc­es.Those determiners express confirmed meaning,and the corresponding translation Chinese sentences have the same characteristic.By analyzing the sentence characteristics with determiners and formalizing the sentences struc­ture,the translation templates are abstracted.By investigating the structure characteristic of original sentences with translation templates,the similarity algorithm was defined.The threshold value of the similarity calculation was obtained by preliminary experiments,and the experiments of Japanese-Chi­nese translation are carried out by a small corpus.The experimental results for several kinds of Japanese sentences with determiners show the translation accuracy rate is 68.6%,template coverage rate reach 83.3%.At last,through the analysis for the translation errors,following conclusion is drawn:the results of morphological analysis are erroneous,because the error of word segmentation the part of speech tagging also are erroneous,result in the grammar structure cannot match with templates;the original sentences are long and especially complex sentences;the templates are too complicated;the similarity calculation method needs to discuss further,and so on.

Empirical study of transpedicular screw placement assisted by digital navigation templates in the thoracic spines

Objective To investigate the accuracy and feasibility of transpedicular screw placement assisted by the navigation templates in cadaveric thoracic spines.Methods Twenty thoracic cadavers specimens were randomly divided into two

Design for CNN Templates with Performance of Global Connectivity Detection

The cellular neural/nonlinear network (CNN) is a powerful tool for image and video signal processing,robotic and biological visions. This paper discusses a general method for designing template of the global connectivitydetection (GCD) CNN, which provides parameter inequalities for determining parameter intervals for implementing thecorresponding functions. The GCD CNN has stronger ability and faster rate for determining global connectivity in binarypatterns than the GCD CNN proposed by Zarandy. An example for detecting the connectivity in complex patterns isgiven.

Fabrication of Large-area 3-D Ordered Silvercoated Colloidal Crystals and Macroporous Silver Films Using Polystyrene Templates

The highly ordered silver-coated colloidal crystals arrays and macroporous silver films were derived through an electrostatics-induced adsorption effect using polystyrene(PS) as templates. Carboxyl-modified PS microspheres were prepared by emulsifier-free emulsion polymerization using methacrylic acid(MAA) as the functional monomer. PS microspheres were self-assembled into close packing colloidal crystals of facecentered cubic arrays to the substrate with vertical deposition method. These colloidal crystals were modified using dopamine(DA) to form poly-dopamine(PDA) during its oxidative polymerization. Through electrostatic interaction, the silver nanoparticles were deposited and adsorbed onto the surfaces of colloidal crystals templates by exposing [Ag(NH_3)_2]^+solution to infrared irradiation. Removal of the polymeric template by etching with methylbenzene solvent resulted in 3D ordered macroporous silver films. The structural and properties of the ordered silver-coated arrays and macroporous silver films were characterized by field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), UV-vis spectroscopy and surface-enhanced Raman spectroscopy(SERS). The results indicate that the prepared silver-coated arrays and macroporous silver films possess the features of ordered multilayer arrangement, uniformity and repeatability as well as an ideal SERS effect.

Induced growth of Fe-N_x active sites using carbon templates

Highly active Fe-N_x sites that effectively improve the performance of non-precious metal electrocatalysts for oxygen reduction reactions（ORRs） are desirable. Herein, we propose a strategy for introducing a carbon template into a melamine/Fe-salt mixture to inductively generate highly active Fe-N_x sites for ORR. Using 57 Fe M？sbauer spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction, we studied the structural composition of the Fe and N co-doped carbon catalysts.Interestingly, the results showed that this system not only converted inactive Fe and Fe-carbides into active Fe-N_4 and other Fe-nitrides, but also improved their intrinsic activities.

Comparison study of GaN films grown on porous and planar GaN templates

The GaN thick films have been grown on porous GaN template and planar metal-organic chemical vapor deposition(MOCVD)-GaN template by halide vapor phase epitaxy(HVPE). The analysis results indicated that the GaN films grown on porous and planar GaN templates under the same growth conditions have similar structural, optical, and electrical properties. But the porous GaN templates could significantly reduce the stress in the HVPE-GaN epilayer and enhance the photoluminescence(PL) intensity. The voids in the porous template were critical for the strain relaxation in the GaN films and the increase of the PL intensity. Thus, the porous GaN converted from β-Ga2O3 film as a novel promising template is suitable for the growth of stress-free GaN films.

Organic Templates for Inorganic Nanocrystal Growth

Nanocrystals provide a variety of size and shape-dependent properties with applications in a wide range of areas, gaining much attention in the past few years. However, due to the nature of the kinetic nanocrystal growth, the procedures often require strict experimental conditions and the shape and size of nanocrystals are difficult to control. In such context, organic templates, which are artificially modified or synthesized, can direct inorganic nanocrystal nucleation and growth to achieve desired shape, size and ultimately properties. In this review article, two general categories of organic templates used for making inorganic nanomaterials are discussed:biotemplates(e.g., peptide, lipid, DNA, and capsid) and block copolymer templates(e.g., block copolymer micelles, star-like block copolymer unimicelles). The goal of this review is to bridge these gaps and help foster a greater awareness of the range and applicability of different organic templating techniques within the field of nanotechnology.

HSE training matrices templates for grassroots posts in petroleum and petrochemical enterprises

This paper aims to standardize health, safety and environment（HSE） training matrices for effectively identifying training requirements and enhancing job competency of grassroots posts in petroleum and petrochemical enterprises. After an investigation into HSE training performance in petroleum and petrochemical enterprises, HSE training matrices templates for 239 grassroots posts involving 22 primary petroleum and petrochemical disciplines were developed based on the technical requirements of HSE training matrices templates and the studies of template development processes and technical methods at grassroots level. Applications of these templates in 12 companies demonstrate their effectiveness in improving HSE training and management for grassroots posts,strengthening risk control and promoting the application of HSE system and tools in grassroots units.

Tuning of the periodicity of stable self-organized metallic templates

The atomic and electronic structures of Pb bilayer/Pt（111） are investigated with two theoretical calculations. We find that the stable （2 × 2）/（3 × 3） Pb/Pt（lll） structure is a promising candidate for being used as a template with self-organized ordered Pb semi-cluster array on the first Pb monolayer. This stable structure can realize the ordered Au single-atom array around the Pb semi-clusters that can cause selective adsorption of noble atoms. The size of Pb magic number semi-cluster plays a more important role in determining the periodicity of the template than the lattice constant misfit between the substrate and the overlayer. This leads to quite a different periodicity between the two stable templates, which are （2 × 2）/（3 × 3） Pb/Pt（111） and Pb/Cu（111）. Therefore, by considering the size of the stable semi-clusters and carefully selecting different substrate materials, we can tune the density of Pb semi-clusters as the nucleation points and then tune the periodicity of the stable template.

Preparation and Magnetic Properties of Cu-Ni Core-shell Nanowires in Ion-track Templates

Cu-Ni core-shell nanowires, with an inner Cu core diameter of about 60 nm and varying Ni shell thicknesses （10, 30, 50, 60, and 80 nm）, were successfully fabricated in porous polycarbonate （PC） ion- track templates by a two-step etching and electrodeposition method. In our experiment, the thickness of Ni shell can be effectively tuned through the etching time of templates. The core-shell structure was confirmed by scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. The X-ray diffraction （XRD） pattern elucidates the co-existence of characteristic peaks for both Cu and Ni, indicating no other phases were formed during preparation. Magnetic hysteresis loops measured via vibrating sample magnetometry （VSM） revealed that Cu-Ni core-shell nanowires with thinner Ni shell exhibited obviously diamagnetic character and together with a weak ferromagnetic activity, whereas ferromagnetic behavior was primarily measured for the wires with thicker Ni shell. With increasing Ni shell thickness, the squareness and coercivity value became smaller due to the shape anisotropy and the formation of multi-domain structure.