UV-curable hyperbranched polyurethane acrylate-polyurethane diacrylate/SiO2 dispersion(HBPUA-PUDA/SiO2) was prepared with isophorone diisocyanate(IPDI),hyperbranched polyester Boltorn H20(H20),hydroxy-ethyl acrylate(H...UV-curable hyperbranched polyurethane acrylate-polyurethane diacrylate/SiO2 dispersion(HBPUA-PUDA/SiO2) was prepared with isophorone diisocyanate(IPDI),hyperbranched polyester Boltorn H20(H20),hydroxy-ethyl acrylate(HEA),polyethyleneglycol(PEG-200) and nano-SiO2.The UV curing kinetics of the films was investigated by FTIR.The results show that the curing speed of the films increases with the adding of nano-SiO2 and decreases with the adding of PUDA due to the slower chain movement.The thermal stability of the HBPUA-PUDA/SiO2 films was studied by using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy(TGA/FTIR).The results show that all films exhibit two degradation stages located at about 320 and 440 °C corresponding to the degradation for hard segments of urethane-acrylate and the degradation for soft segment and polyester core.In addition,the results from the analysis of TGA/FTIR also indicate that the decomposition temperature of HBPUA-PUDA/SiO2 film is 15 °C higher than that obtained for pure polymer.The degradation mechanism was proposed according to TGA/FTIR results.展开更多
Three thermal analytical techniques such as differential scanning calorimetry(DSC), thermal gravimetric analysis(TGA) using five heating rates, and DSC-Fourier Transform Infrared(DSCFTIR) microspectroscopy using one h...Three thermal analytical techniques such as differential scanning calorimetry(DSC), thermal gravimetric analysis(TGA) using five heating rates, and DSC-Fourier Transform Infrared(DSCFTIR) microspectroscopy using one heating rate, were used to determine the thermal characteristics and the dehydration process of aspartame(APM) hemihydrate in the solid state.The intramolecular cyclization process of APM anhydrate was also examined. One exothermic and four endothermic peaks were observed in the DSC thermogram of APM hemihydrate,in which the exothermic peak was due to the crystallization of some amorphous APM caused by dehydration process from hemihydrate to anhydride. While four endothermic peaks were corresponded to the evaporation of absorbed water, the dehydration of hemihydrate, the diketopiperazines(DKP) formation via intramolecular cyclization, and the melting of DKP, respectively. The weight loss measured in TGA curve of APM hemihydrate was associated with these endothermic peaks in the DSC thermogram. According to the Flynn–Wall–Ozawa(FWO)model, the activation energy of dehydration process within 100–150 °C was about 218 ± 11 kJ/mol determined by TGA technique. Both the dehydration and DKP formation processes for solid-state APM hemihydrate were markedly evidenced from the thermal-responsive changes in several specific FTIR bands by a single-step DSC-FTIR microspectroscopy.展开更多
文摘UV-curable hyperbranched polyurethane acrylate-polyurethane diacrylate/SiO2 dispersion(HBPUA-PUDA/SiO2) was prepared with isophorone diisocyanate(IPDI),hyperbranched polyester Boltorn H20(H20),hydroxy-ethyl acrylate(HEA),polyethyleneglycol(PEG-200) and nano-SiO2.The UV curing kinetics of the films was investigated by FTIR.The results show that the curing speed of the films increases with the adding of nano-SiO2 and decreases with the adding of PUDA due to the slower chain movement.The thermal stability of the HBPUA-PUDA/SiO2 films was studied by using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy(TGA/FTIR).The results show that all films exhibit two degradation stages located at about 320 and 440 °C corresponding to the degradation for hard segments of urethane-acrylate and the degradation for soft segment and polyester core.In addition,the results from the analysis of TGA/FTIR also indicate that the decomposition temperature of HBPUA-PUDA/SiO2 film is 15 °C higher than that obtained for pure polymer.The degradation mechanism was proposed according to TGA/FTIR results.
文摘Three thermal analytical techniques such as differential scanning calorimetry(DSC), thermal gravimetric analysis(TGA) using five heating rates, and DSC-Fourier Transform Infrared(DSCFTIR) microspectroscopy using one heating rate, were used to determine the thermal characteristics and the dehydration process of aspartame(APM) hemihydrate in the solid state.The intramolecular cyclization process of APM anhydrate was also examined. One exothermic and four endothermic peaks were observed in the DSC thermogram of APM hemihydrate,in which the exothermic peak was due to the crystallization of some amorphous APM caused by dehydration process from hemihydrate to anhydride. While four endothermic peaks were corresponded to the evaporation of absorbed water, the dehydration of hemihydrate, the diketopiperazines(DKP) formation via intramolecular cyclization, and the melting of DKP, respectively. The weight loss measured in TGA curve of APM hemihydrate was associated with these endothermic peaks in the DSC thermogram. According to the Flynn–Wall–Ozawa(FWO)model, the activation energy of dehydration process within 100–150 °C was about 218 ± 11 kJ/mol determined by TGA technique. Both the dehydration and DKP formation processes for solid-state APM hemihydrate were markedly evidenced from the thermal-responsive changes in several specific FTIR bands by a single-step DSC-FTIR microspectroscopy.
