LaNiO3 (LNO) thin films were prepared on Pt(111) / Ti / SiO2 / Si substrate by metal-organic decomposition (MOD) method. Pb(Zr,Ti)O3 ferroelectric thin films and their compositionally graded thin films were prepared o...LaNiO3 (LNO) thin films were prepared on Pt(111) / Ti / SiO2 / Si substrate by metal-organic decomposition (MOD) method. Pb(Zr,Ti)O3 ferroelectric thin films and their compositionally graded thin films were prepared on LNO / Pt / Ti / SiO2 /Si substrates by Sol-gel method. The composition depth profile of a typical up-graded film was determined by using a combination of Auger Electron Spectroscopy (ASE) and Ar Ion Etching. The results confirm that the processing method produces graded composition changes. XRD analysis showed that the graded thin films possessed composite structure of tetragonal and rhombohedral. The dielectric constants of Up-graded and Down-graded thin films were higher than that of each thin film unit. The dielectric constants were 277 and 269 at 10 kHz, respectively. The loss tangents were 0.019 and 0.018 at 10 kHz, respectively. The Hysteresis loops showed that the remanent polarizations of graded thin films were higher than that of each thin film unit, but the coercive fields were smaller. The remanent polarizations of Up-graded and Down-graded thin films were 30.06 and 26.96 μC·cm-2, respectively. The coercive fields were 54.14, 54.23 kV·cm-1, respectively. The pyroelectric coefficients of Up-graded and Down-graded thin films were 4.62, 2.51×10-8 C·cm-2·K-1 at room temperature, respectively. They were higher than that of each thin film unit.展开更多
Room-temperature ferromagnetism has been experimentally observed in annealed rutile TiO2 single crystals when a magnetic field is applied parallel to the sample plane.By combining X-ray absorption near the edge struct...Room-temperature ferromagnetism has been experimentally observed in annealed rutile TiO2 single crystals when a magnetic field is applied parallel to the sample plane.By combining X-ray absorption near the edge structure spectrum and positron annihilation lifetime spectroscopy,Ti^3+-V O defect complexes(or clusters) have been identified in annealed crystals at a high vacuum.We elucidate that the unpaired 3d electrons in Ti^3+ ions provide the observed room-temperature ferromagnetism.In addition,excess oxygen ions in the TiO2 lattice could induce a number of Ti vacancies which obviously increase magnetic moments.展开更多
Pb(Zr0.4Ti0.6)O3 film prepared by sol-gel spin coating on a Pt/Ti/SiO2/Si substrate is applied to ferroelectric capacitors with Pt or Ru as the top electrode. For the Pt/PZT/Pt and Ru/PZT/Pt ferroelectric capacitors...Pb(Zr0.4Ti0.6)O3 film prepared by sol-gel spin coating on a Pt/Ti/SiO2/Si substrate is applied to ferroelectric capacitors with Pt or Ru as the top electrode. For the Pt/PZT/Pt and Ru/PZT/Pt ferroelectric capacitors, although with the same ferroelectric film, different top electrode materials incur different properties of PZT capacitors, such as fatigue, leakage, remanent and saturated polarization, except the similar crystal orientations of the PZT film. After 10^10 switch cycles, the remanent polarizations of the Ru/PZT/Pt and Pt/PZT/Pt capacitors decrease to 70% and 84%, respectively. The leakage current density of the latter increases obviously at positive bias after 108 switch cycles, compared with the former. Different materials for the top electrode bring different conditions at the PZT/top electrode interface. The influence of oxygen-vacancy concentration at the PZT/electrode interface and the influence of oxides of the electrode material at the PZT/electrode interface to charge injection can explain the difference of properties of the PZT capacitors with Pt or Ru as the top electrodes.展开更多
锂离子电容器(LICs)是一种很有前途的储能装置,因为它们同时具有锂离子电池的高能量密度和超级电容器的高功率密度的特点.然而,由于锂离子电容器中阳极和阴极之间电化学反应动力学的不匹配使得探索具有快速离子扩散和电子转移通道的阳...锂离子电容器(LICs)是一种很有前途的储能装置,因为它们同时具有锂离子电池的高能量密度和超级电容器的高功率密度的特点.然而,由于锂离子电容器中阳极和阴极之间电化学反应动力学的不匹配使得探索具有快速离子扩散和电子转移通道的阳极材料面临挑战.在此,通过静电纺丝策略将具有可控末端基团的二维Ti_(3)C_(2)MXene引入一维碳纳米纤维中,形成三维导电网络.在这种Ti_(3)C_(2)MXene和碳基复合材料(称为KTi-400@CNFs)中,二维纳米片结构赋予了Ti_(3)C_(2)MXene更多Li+存储活性位点,而碳骨架则有利于提高复合材料的导电性.更值得一提的是,在Ti_(3)C_(2)MXene和碳骨架的界面上形成了Ti–O–C键.复合材料中的这种化学键为电子的快速传输和离子在层与层之间纵向的快速扩散建立了桥梁.因此,优化后的KTi-400@CNFs复合材料在电流密度为5 A g-1的情况下,500次循环后仍保持235 mA h g-1的良好容量.由KTi-400@CNFs//AC组成的锂离子电容器实现了高能量密度(114.3 W h kg-1)和高功率密度(12.8 kW kg-1).KTi-400@CNFs的这种独特结构和优异的电化学性能为二维材料制备提供了参考.展开更多
Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Fe\-\{0.2\}O\-\{3-\%δ\%\} and Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Ti\-\{0.2\}O\-\{3-\%δ\%\} oxides were synthesized by a combined EDTA\|citrate complexing method. The catalytic behavior...Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Fe\-\{0.2\}O\-\{3-\%δ\%\} and Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Ti\-\{0.2\}O\-\{3-\%δ\%\} oxides were synthesized by a combined EDTA\|citrate complexing method. The catalytic behavior of these two oxides with the perovskite structure was studied during the reaction of methane oxidation. The pre\|treatment with methane has different effect on the catalytic activities of both the oxides. The methane pre\|treatment has not resulted in the change of the catalytic activity of BSCFO owing to its excellent reversibility of the perovskite structure resulting from the excellent synergistic interaction between Co and Fe in the oxide. However, the substitution with Ti on Fe\|site in the lattice makes the methane pre\|treatment have an obvious influence on the activity of the formed BSCTO oxide.展开更多
文摘LaNiO3 (LNO) thin films were prepared on Pt(111) / Ti / SiO2 / Si substrate by metal-organic decomposition (MOD) method. Pb(Zr,Ti)O3 ferroelectric thin films and their compositionally graded thin films were prepared on LNO / Pt / Ti / SiO2 /Si substrates by Sol-gel method. The composition depth profile of a typical up-graded film was determined by using a combination of Auger Electron Spectroscopy (ASE) and Ar Ion Etching. The results confirm that the processing method produces graded composition changes. XRD analysis showed that the graded thin films possessed composite structure of tetragonal and rhombohedral. The dielectric constants of Up-graded and Down-graded thin films were higher than that of each thin film unit. The dielectric constants were 277 and 269 at 10 kHz, respectively. The loss tangents were 0.019 and 0.018 at 10 kHz, respectively. The Hysteresis loops showed that the remanent polarizations of graded thin films were higher than that of each thin film unit, but the coercive fields were smaller. The remanent polarizations of Up-graded and Down-graded thin films were 30.06 and 26.96 μC·cm-2, respectively. The coercive fields were 54.14, 54.23 kV·cm-1, respectively. The pyroelectric coefficients of Up-graded and Down-graded thin films were 4.62, 2.51×10-8 C·cm-2·K-1 at room temperature, respectively. They were higher than that of each thin film unit.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 61006066)the National Natural Science Foundation of China (Grant No. 11175191)
文摘Room-temperature ferromagnetism has been experimentally observed in annealed rutile TiO2 single crystals when a magnetic field is applied parallel to the sample plane.By combining X-ray absorption near the edge structure spectrum and positron annihilation lifetime spectroscopy,Ti^3+-V O defect complexes(or clusters) have been identified in annealed crystals at a high vacuum.We elucidate that the unpaired 3d electrons in Ti^3+ ions provide the observed room-temperature ferromagnetism.In addition,excess oxygen ions in the TiO2 lattice could induce a number of Ti vacancies which obviously increase magnetic moments.
基金Supported by the National Natural Science Foundation of China under Grant No 90407023, and the National High Technology Program of China under Grant No 2004AA404240.
文摘Pb(Zr0.4Ti0.6)O3 film prepared by sol-gel spin coating on a Pt/Ti/SiO2/Si substrate is applied to ferroelectric capacitors with Pt or Ru as the top electrode. For the Pt/PZT/Pt and Ru/PZT/Pt ferroelectric capacitors, although with the same ferroelectric film, different top electrode materials incur different properties of PZT capacitors, such as fatigue, leakage, remanent and saturated polarization, except the similar crystal orientations of the PZT film. After 10^10 switch cycles, the remanent polarizations of the Ru/PZT/Pt and Pt/PZT/Pt capacitors decrease to 70% and 84%, respectively. The leakage current density of the latter increases obviously at positive bias after 108 switch cycles, compared with the former. Different materials for the top electrode bring different conditions at the PZT/top electrode interface. The influence of oxygen-vacancy concentration at the PZT/electrode interface and the influence of oxides of the electrode material at the PZT/electrode interface to charge injection can explain the difference of properties of the PZT capacitors with Pt or Ru as the top electrodes.
基金supported by the National Natural Science Foundation of China (22005167 and 21905152)Shandong Provincial Natural Science Foundation (ZR2020QB125 and ZR2020MB045)+2 种基金China Postdoctoral Science Foundation (2021M693256, 2021T140687 and 2022M713249)Qingdao Postdoctoral Applied Research Project, Taishan Scholar Project of Shandong Province (ts20190937)the Youth Innovation Team Project for Talent Introduction and Cultivation in Universities of Shandong Province。
文摘锂离子电容器(LICs)是一种很有前途的储能装置,因为它们同时具有锂离子电池的高能量密度和超级电容器的高功率密度的特点.然而,由于锂离子电容器中阳极和阴极之间电化学反应动力学的不匹配使得探索具有快速离子扩散和电子转移通道的阳极材料面临挑战.在此,通过静电纺丝策略将具有可控末端基团的二维Ti_(3)C_(2)MXene引入一维碳纳米纤维中,形成三维导电网络.在这种Ti_(3)C_(2)MXene和碳基复合材料(称为KTi-400@CNFs)中,二维纳米片结构赋予了Ti_(3)C_(2)MXene更多Li+存储活性位点,而碳骨架则有利于提高复合材料的导电性.更值得一提的是,在Ti_(3)C_(2)MXene和碳骨架的界面上形成了Ti–O–C键.复合材料中的这种化学键为电子的快速传输和离子在层与层之间纵向的快速扩散建立了桥梁.因此,优化后的KTi-400@CNFs复合材料在电流密度为5 A g-1的情况下,500次循环后仍保持235 mA h g-1的良好容量.由KTi-400@CNFs//AC组成的锂离子电容器实现了高能量密度(114.3 W h kg-1)和高功率密度(12.8 kW kg-1).KTi-400@CNFs的这种独特结构和优异的电化学性能为二维材料制备提供了参考.
文摘Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Fe\-\{0.2\}O\-\{3-\%δ\%\} and Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Ti\-\{0.2\}O\-\{3-\%δ\%\} oxides were synthesized by a combined EDTA\|citrate complexing method. The catalytic behavior of these two oxides with the perovskite structure was studied during the reaction of methane oxidation. The pre\|treatment with methane has different effect on the catalytic activities of both the oxides. The methane pre\|treatment has not resulted in the change of the catalytic activity of BSCFO owing to its excellent reversibility of the perovskite structure resulting from the excellent synergistic interaction between Co and Fe in the oxide. However, the substitution with Ti on Fe\|site in the lattice makes the methane pre\|treatment have an obvious influence on the activity of the formed BSCTO oxide.