期刊文献+
共找到11篇文章
< 1 >
每页显示 20 50 100
从辐照过的钍中分离镤的研究 被引量:4
1
作者 方克明 杨维凡 +4 位作者 牟万统 袁双贵 李宗伟 沈水法 张学谦 《核化学与放射化学》 CAS CSCD 北大核心 1998年第3期176-182,共7页
研究了以1-苯基-3-甲基-4-苯甲酰基吡唑啉酮-5(PMBP)和三异辛胺(TIOA)为萃取剂,盐酸-氢氟酸溶液为反萃剂,从中子辐照过的钍中分离纯化镤的一个快速、有效的流程。对流程的一些主要步骤中的分离条件作了研究。... 研究了以1-苯基-3-甲基-4-苯甲酰基吡唑啉酮-5(PMBP)和三异辛胺(TIOA)为萃取剂,盐酸-氢氟酸溶液为反萃剂,从中子辐照过的钍中分离纯化镤的一个快速、有效的流程。对流程的一些主要步骤中的分离条件作了研究。以钍的裂变产物为多重示踪剂检验了该流程,得到了主要杂质元素的去污因子,给出了镤的回收率。 展开更多
关键词 PMBP tioa 分离 中子辐照 萃取剂 反萃剂
下载PDF
乳状液膜对镉(Ⅱ)的迁移行为及其分离 被引量:1
2
作者 李全民 张青芬 +1 位作者 刘奇 杨峻青 《分析化学》 SCIE EI CAS CSCD 北大核心 1997年第4期492-492,共1页
关键词 乳状液膜 液膜分离 tioa 迁移
下载PDF
可见光活性氮掺杂纳米二氧化钛研究进展 被引量:17
3
作者 曹文斌 许军娜 +2 位作者 刘文秀 孙芃 张欣 《材料工程》 EI CAS CSCD 北大核心 2015年第3期83-90,共8页
氮掺杂可拓宽TiO2的光响应范围和实现可见光响应、增强其对太阳光能的利用和提高它的光催化效率而成为该领域关注的焦点。本文综述了氮掺杂对TiO2能带结构的影响及氮掺杂纳米TiO2薄膜和粉体的制备方法等方面的研究进展,总结了该领域研... 氮掺杂可拓宽TiO2的光响应范围和实现可见光响应、增强其对太阳光能的利用和提高它的光催化效率而成为该领域关注的焦点。本文综述了氮掺杂对TiO2能带结构的影响及氮掺杂纳米TiO2薄膜和粉体的制备方法等方面的研究进展,总结了该领域研究中亟待解决的问题并对今后的发展提出了作者的思考。 展开更多
关键词 氮掺杂二氧化钛 能带结构 制备方法 可见光
下载PDF
T10A钢磨床钳口淬火开裂原因分析
4
作者 李红莉 燕样样 《热加工工艺》 CSCD 北大核心 2008年第12期98-99,共2页
采用宏观检验、微观检验、硬度测试等方法对万能工具磨床用钳口开裂原因进行分析。结果表明,淬火加热温度过高和冷却液浓度偏低是影响磨床钳口淬火开裂的主要原因,并提出了预防措施。
关键词 T10A钢 磨床钳口 淬火裂纹
下载PDF
钴钇掺杂(Ba,Sr)TiO_3基介电陶瓷的制备与性能研究
5
作者 王学荣 刘全生 万玉春 《长春理工大学学报(自然科学版)》 2012年第2期142-144,共3页
采用二次固相反应法制备Ba0.7Sr0.3TiO3介电陶瓷,研究了掺杂钴、钇离子对钛酸锶钡介电性能的影响。结果表明,陶瓷样品Y3+、Co3+的最佳掺杂浓度分别为0.04mol%和0.05mol%,最佳烧结温度为1340℃,样品的相对介电常数为4200,介电损耗(tanδ)... 采用二次固相反应法制备Ba0.7Sr0.3TiO3介电陶瓷,研究了掺杂钴、钇离子对钛酸锶钡介电性能的影响。结果表明,陶瓷样品Y3+、Co3+的最佳掺杂浓度分别为0.04mol%和0.05mol%,最佳烧结温度为1340℃,样品的相对介电常数为4200,介电损耗(tanδ)为0.005。样品的结构为四方晶系,P4mm空间群。获得了高介电常数、低损耗的Ba0.7Sr0.3TiO3介电陶瓷。 展开更多
关键词 (Ba Sr)TiO3陶瓷 介电性能 Y3+/Co3+掺杂
下载PDF
Effects of B_2O_3-SiO_2 doping on electrical properties of Ba_(0.65)Sr_(0.35)TiO_3 ceramics
6
作者 章天金 江娟 +2 位作者 张柏顺 顾豪爽 刘江华 《中国有色金属学会会刊:英文版》 CSCD 2005年第2期229-232,共4页
Ba0.65Sr0.35TiO3 ceramics doped with B2O3-SiO2 glass composition were prepared by using conventional solid-state reaction method. The effects of glass dopant on the dielectric and ferroelectric properties were investi... Ba0.65Sr0.35TiO3 ceramics doped with B2O3-SiO2 glass composition were prepared by using conventional solid-state reaction method. The effects of glass dopant on the dielectric and ferroelectric properties were investigated. The results show that the dielectric constant decreases while the dielectric loss increases after doping. And as the glass content increases the dielectric constant decreases while the dielectric loss changes slightly. From the complex impedance analysis the resistance and the relaxation time of the grain and the grain boundary can be calculated. Comparing the P—E hysteresis loop of undoped Ba0.65Sr0.35TiO3 ceramics with that of B2O3-SiO2 doped Ba0.65Sr0.35TiO3 ceramics, it can be seen that the remanent polarization decreases when the B2O3-SiO2 content is lower than 8%(molar fraction), and the coercive field increases with the increase of B2O3-SiO2 content. 展开更多
关键词 Ba0.65Sr0.35tioa陶瓷 二氧化二硼-二氧化硅 绝缘性质 铁电性质
下载PDF
针织器材用T10A钢表面化学镀镍工艺 被引量:1
7
作者 包雨威 范金辉 朱世根 《中国表面工程》 EI CAS CSCD 北大核心 2013年第6期63-69,共7页
为了在T10A钢表面得到厚度薄且孔隙率较低的化学镀镍层,运用单因素分析法,考察了施镀温度、施镀时间、硫酸镍质量浓度和次磷酸钠质量浓度对化学镀镍层厚度及孔隙率的影响,并初步得到各因素指标的适宜浓度范围。在此基础上,通过正交试验... 为了在T10A钢表面得到厚度薄且孔隙率较低的化学镀镍层,运用单因素分析法,考察了施镀温度、施镀时间、硫酸镍质量浓度和次磷酸钠质量浓度对化学镀镍层厚度及孔隙率的影响,并初步得到各因素指标的适宜浓度范围。在此基础上,通过正交试验法,确定了化学镀镍的最优工艺配方:硫酸镍25g/L,次磷酸钠25g/L,醋酸钠25g/L,辅助配位剂25g/L,光亮剂2g/L,硫脲2mg/L,pH=4.0,施镀温度70℃,施镀时间10min。正交试验的极差分析表明:在施镀温度、施镀时间、硫酸镍质量浓度和次磷酸钠质量浓度4个因素指标中,硫酸镍质量浓度对于镀层厚度、孔隙率及镀层显微硬度的影响都最大;且采用该化学镀镍配方,可获得孔隙率为12点/cm2,镀层厚度为4.1μm及镀层显微硬度为487HV0.1的镀层。 展开更多
关键词 T10A钢 化学镀镍 镀层厚度 孔隙率 正交试验
下载PDF
Separation of protactinium in the reaction of 60MeV/nucleon ^(18)O ions with natural uranium
8
作者 YANG Wei-Fan, YUAN Shuang-Gui, XIAO Yong-Hou, XU Yan-Bing, FANG Ke-Ming (Institute of Modern Physics, the Chinese Academy of Sciences, Lanzhou 730000) 《Nuclear Science and Techniques》 SCIE CAS CSCD 2002年第2期119-124,共6页
The activities of protactinium were produced by the multi-nucleontransfer reactions in bombardment of the natural uranium with 60 MeV/nucleon 1sOions. A simple, relatively fast radiochemical procedure was used for ext... The activities of protactinium were produced by the multi-nucleontransfer reactions in bombardment of the natural uranium with 60 MeV/nucleon 1sOions. A simple, relatively fast radiochemical procedure was used for extraction sep-aration of protactinium from the uranium and a variety of reaction products using1-phenyl-3-methyl-4-benzoyl-5-pyrazolone and tri-iso-octylamine as extractants. Theγ ray spectrum of the separated protactinium fractions showed that the protactiniumcould be separated from all of the main impurity elements. The decontaminationfactors of the uranium and the main reaction products produced in the reaction aregiven. 展开更多
关键词 PMBP提取 天然铀
下载PDF
一种形式化的实时协议互操作性测试方法 被引量:1
9
作者 王之梁 尹霞 景传明 《中国科学(E辑)》 CSCD 北大核心 2008年第10期1614-1635,共22页
协议互操作性测试是一种保证网络通信协议实现质量的重要技术.下一代互联网协议需要提供对实时应用的有效支持,然而已有互操作性测试相关研究中并没有考虑协议中的时间约束,现有互操作性测试技术很难应用于实时协议互操作性测试中.文中... 协议互操作性测试是一种保证网络通信协议实现质量的重要技术.下一代互联网协议需要提供对实时应用的有效支持,然而已有互操作性测试相关研究中并没有考虑协议中的时间约束,现有互操作性测试技术很难应用于实时协议互操作性测试中.文中提出了一种形式化的实时协议互操作性测试方法.首先提出了一个用于描述实时协议互操作性测试被测系统的形式化模型CMpTIOA(通信多端口时间输入输出自动机),基于该模型定义了时间互操作性关系;然后提出一种以时间互操作性关系为指导的测试生成方法,根据被测系统模型生成参数化测试行为树,在该方法中还集成了可执行性预判决机制,在一定程度上缓解了状态空间爆炸问题;最后将提出的理论和方法应用于IPv6邻居发现协议的互操作性测试中,验证了该方法的可行性. 展开更多
关键词 协议测试 互操作性测试 实时测试 测试生成 时间输入输出 自动机tioa
原文传递
A formal method to real-time protocol interoperability testing 被引量:6
10
作者 WANG ZhiLiang1,3,YIN Xia2,3 & JING ChuanMing2,3 1 Network Research Center,Tsinghua University,Beijing 100084,China 2 Department of Computer Science and Technology,Tsinghua University,Beijing 100084,China 3 Tsinghua National Laboratory for Information Science and Technology(TNList) ,Beijing 100084,China 《Science in China(Series F)》 2008年第11期1723-1744,共22页
Interoperability testing is an important technique to ensure the quality of implementations of network communication protocol. In the next generation Internet protocol, real-time applications should be supported effec... Interoperability testing is an important technique to ensure the quality of implementations of network communication protocol. In the next generation Internet protocol, real-time applications should be supported effectively. However, time constraints were not considered in the related studies of protocol interoperability testing, so existing interoperability testing methods are difficult to be applied in real-time protocol interoperability testing. In this paper, a formal method to real-time protocol interoperability testing is proposed. Firstly, a formal model CMpTIOA (communicating multi-port timed input output automata) is defined to specify the system under test (SUT) in real-time protocol interoperability testing; based on this model, timed interoperability relation is then defined. In order to check this relation, a test generation method is presented to generate a parameterized test behavior tree from SUT model; a mechanism of executability pre-determination is also integrated in the test generation method to alleviate state space explosion problem to some extent. The proposed theory and method are then applied in interoperability testing of IPv6 neighbor discovery protocol to show the feasibility of this method. 展开更多
关键词 protocol testing interoperability testing real-time testing test generation timed input output automata(tioa
原文传递
Effects of reductive annealing on insulating polycrystalline thin films of Nb-doped anatase TiO2:recovery of high conductivity 被引量:1
11
作者 Shoichiro Nakao Yasushi Hirose Tetsuya Hasegawa 《Journal of Semiconductors》 EI CAS CSCD 2016年第2期10-13,共4页
We studied the effects of reductive annealing on insulating polycrystalline thin films of anatase Nb- doped TiO2 (TNO). The insulating TNO films were intentionally fabricated by annealing conductive TNO films in oxy... We studied the effects of reductive annealing on insulating polycrystalline thin films of anatase Nb- doped TiO2 (TNO). The insulating TNO films were intentionally fabricated by annealing conductive TNO films in oxygen ambient at 400 ℃. Reduced free carrier absorption in the insulating TNO films indicated carrier com- pensation due to excess oxygen. With H2-annealing, both carrier density and Hall mobility recovered to the level of conducting TNO, demonstrating that the excess oxygen can be efficiently removed by the annealing process without introducing additional scattering centers. 展开更多
关键词 transparent conductive oxide Nb-doped tioa pulsed laser deposition
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部