研究了模拟薄板坯连铸连轧工艺(Thin Slab Casting and Rolling)生产Ti-IF钢的析出行为。利用透射电镜分析了铸坯连续快速冷却及热连轧过程Ti-IF钢中第二相粒子的析出行为特征,将TiS,Ti4C2S2等析出粒子的尺寸、分布及数量分别与传统工...研究了模拟薄板坯连铸连轧工艺(Thin Slab Casting and Rolling)生产Ti-IF钢的析出行为。利用透射电镜分析了铸坯连续快速冷却及热连轧过程Ti-IF钢中第二相粒子的析出行为特征,将TiS,Ti4C2S2等析出粒子的尺寸、分布及数量分别与传统工艺的析出物进行了分析比较。结果表明,TSCR生产的Ti-IF钢析出物比传统工艺更为粗大,且发现有较粗大的TiC和Ti4C2S2的复合析出物。展开更多
C-Si-Mn TRIP steels were produced using the thin slab casting and rolling （TSCR） process under simulation in laboratory. The results of tensile tests show that the yield strength, tensile strength, and the total elo...C-Si-Mn TRIP steels were produced using the thin slab casting and rolling （TSCR） process under simulation in laboratory. The results of tensile tests show that the yield strength, tensile strength, and the total elongation of the experimental TRIP steels are 430 MPa, 610 MPa, and 28.4%, respectively. Optical microscopy, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM） were employed to identify the microstructures of the TRIP steels. The final microstructures consist of ferrite, bainite, and retained austenite. The results of quantitative color metallography show that the fraction of the retained austenite is about 5.8%.展开更多
The grain refinement mechanism and synergistic effect of Mn and Ti involved in the Ti-microalloying technology of thin slab casting and direct rolling （TSCR） were elucidated. Because the inevitable precipitation of ...The grain refinement mechanism and synergistic effect of Mn and Ti involved in the Ti-microalloying technology of thin slab casting and direct rolling （TSCR） were elucidated. Because the inevitable precipitation of TiN in high Ti-containing liquid steel decreases the volume fraction of TiN precipitated from austenite and the rapid coarse- ning rate leads to a large size of TiN particles, a relatively weak inhibition effect on the recrystallized grain growth was obtained compared with that in the low Ti-containing steel. However, the ferrite grain size in high Ti-containing steel can be refined by the so-called non-recrystallization rolling. The complex addition of Mn and Ti can improve the strength and toughness of strip remarkably, and the mechanisms are that Mn decreases the transformation tempera- ture, refines the ferrite grains, and enhances the formation of bainite and TiC precipitation in ferrite.展开更多
Based on the characteristics of Thin slab casting and rolling (TSCR) process,using test methods such as SEM,EDS and measuring content of inclusions, the influencing factor of controlling inclusions during producing mi...Based on the characteristics of Thin slab casting and rolling (TSCR) process,using test methods such as SEM,EDS and measuring content of inclusions, the influencing factor of controlling inclusions during producing middle and high carbon steel was studied. The technologies of electric furnace smelting, LF refining and controlling inclusions of tundish were proposed. The inclusions control level of middle and high carbon steel in which the carbon content is 0.3-1.0%, The level reached and even exceeded the level of like product producing with conventional process at home and abroad.展开更多
Steel is the important fundamental material for national economic construction. In 2005, China's total production of steel approached 1/3 of that in the world, the plate stuff occupied 1/3, around 0.1 billion tons...Steel is the important fundamental material for national economic construction. In 2005, China's total production of steel approached 1/3 of that in the world, the plate stuff occupied 1/3, around 0.1 billion tons, of this number. It held research significance and application potential in effectively saving resources, energy,展开更多
文摘研究了模拟薄板坯连铸连轧工艺(Thin Slab Casting and Rolling)生产Ti-IF钢的析出行为。利用透射电镜分析了铸坯连续快速冷却及热连轧过程Ti-IF钢中第二相粒子的析出行为特征,将TiS,Ti4C2S2等析出粒子的尺寸、分布及数量分别与传统工艺的析出物进行了分析比较。结果表明,TSCR生产的Ti-IF钢析出物比传统工艺更为粗大,且发现有较粗大的TiC和Ti4C2S2的复合析出物。
基金This work was financially supported by the National Natural Science Foundation of China (No.50334010).
文摘C-Si-Mn TRIP steels were produced using the thin slab casting and rolling （TSCR） process under simulation in laboratory. The results of tensile tests show that the yield strength, tensile strength, and the total elongation of the experimental TRIP steels are 430 MPa, 610 MPa, and 28.4%, respectively. Optical microscopy, scanning electron microscopy （SEM）, and transmission electron microscopy （TEM） were employed to identify the microstructures of the TRIP steels. The final microstructures consist of ferrite, bainite, and retained austenite. The results of quantitative color metallography show that the fraction of the retained austenite is about 5.8%.
文摘The grain refinement mechanism and synergistic effect of Mn and Ti involved in the Ti-microalloying technology of thin slab casting and direct rolling （TSCR） were elucidated. Because the inevitable precipitation of TiN in high Ti-containing liquid steel decreases the volume fraction of TiN precipitated from austenite and the rapid coarse- ning rate leads to a large size of TiN particles, a relatively weak inhibition effect on the recrystallized grain growth was obtained compared with that in the low Ti-containing steel. However, the ferrite grain size in high Ti-containing steel can be refined by the so-called non-recrystallization rolling. The complex addition of Mn and Ti can improve the strength and toughness of strip remarkably, and the mechanisms are that Mn decreases the transformation tempera- ture, refines the ferrite grains, and enhances the formation of bainite and TiC precipitation in ferrite.
文摘Based on the characteristics of Thin slab casting and rolling (TSCR) process,using test methods such as SEM,EDS and measuring content of inclusions, the influencing factor of controlling inclusions during producing middle and high carbon steel was studied. The technologies of electric furnace smelting, LF refining and controlling inclusions of tundish were proposed. The inclusions control level of middle and high carbon steel in which the carbon content is 0.3-1.0%, The level reached and even exceeded the level of like product producing with conventional process at home and abroad.
文摘Steel is the important fundamental material for national economic construction. In 2005, China's total production of steel approached 1/3 of that in the world, the plate stuff occupied 1/3, around 0.1 billion tons, of this number. It held research significance and application potential in effectively saving resources, energy,
