Combined with the technological characteristics of thin slab continuous rolling process （TSCR）, dynamic recrystallization of an extremely coarse austenite of low carbon steel is studied by Thermecmaster-Z hot simula...Combined with the technological characteristics of thin slab continuous rolling process （TSCR）, dynamic recrystallization of an extremely coarse austenite of low carbon steel is studied by Thermecmaster-Z hot simulator. By the analysis of true stress-strain curves and the observation of microstructures at different deformation stages, the critical stress and critical strain are determined under different deformation conditions. The effect of Z parameter on dynamic recrystallization of coarse austenite is studied. The microstructure evolution in real production is also discussed.展开更多
Based on load-oriented manufacturing control theory,different combining modes and slab storage calculation method for continuous casting and hot rolling were discussed.The buffer capacity index of continuous casting-r...Based on load-oriented manufacturing control theory,different combining modes and slab storage calculation method for continuous casting and hot rolling were discussed.The buffer capacity index of continuous casting-rolling was introduced,and the reasonable slab storage under different combining modes was calculated with buffer capacity index of 120.00 hfor CCR,79.20 hfor HCR,19.68 hfor DHCR and 3.84 hfor DR.Thin slab is 1.20 h,and the strip is zero.Theory gist was provided for steel enterprise to decrease storage.展开更多
研究了模拟薄板坯连铸连轧工艺(Thin Slab Casting and Rolling)生产Ti-IF钢的析出行为。利用透射电镜分析了铸坯连续快速冷却及热连轧过程Ti-IF钢中第二相粒子的析出行为特征,将TiS,Ti4C2S2等析出粒子的尺寸、分布及数量分别与传统工...研究了模拟薄板坯连铸连轧工艺(Thin Slab Casting and Rolling)生产Ti-IF钢的析出行为。利用透射电镜分析了铸坯连续快速冷却及热连轧过程Ti-IF钢中第二相粒子的析出行为特征,将TiS,Ti4C2S2等析出粒子的尺寸、分布及数量分别与传统工艺的析出物进行了分析比较。结果表明,TSCR生产的Ti-IF钢析出物比传统工艺更为粗大,且发现有较粗大的TiC和Ti4C2S2的复合析出物。展开更多
Based on load-oriented manufacturing control theory, different combining modes and slab storage calculation method for continuous casting and hot rolling were discussed. The buffer capacity index of continuous casting...Based on load-oriented manufacturing control theory, different combining modes and slab storage calculation method for continuous casting and hot rolling were discussed. The buffer capacity index of continuous casting-rolling was introduced, and the reasonable slab storage under different combining modes was calculated with buffer capacity index of 120.00 h for CCR, 79.20 h for HCR, 19.68 h for DHCR and 3.84 h for DR. Thin slab is 1.20 h, and the strip is zero. Theory gist was provided for steel enterprise to decrease storage.展开更多
The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stir...The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stirring. The transient electromagnetic field distribution and the induced electromagnetic force were numerically described. The effects of stirring current, stirring frequency, and different stirrer configurations on the electromagnetically driven flow field in the strand were investigated and the optimization of the stirring parameters was discussed by performing a relative comparison of numerical results. Results show that the in-roller type strand electromagnetic stirrer （S- EMS） pair generates the fluctuating magnetic fields, penetrating through the cast slab and periodically parallel shift- ing along the slab wide face w!th time evolution. The transient induced electromagnetic forces travels toward the magnetic flux shifting direction, Different stirring parameters （i. e. current and frequency） and stirrer configurations affect the stirring strength and the flow rbcirculation pattern in the strand, which are closely related to metallurgical performances of the stirrers. There is an optimum frequency to obtain the maximum stirring. The present model pro vides a relatively theoretical insight into the in-roll type strand electromagnetic stirring system for best operating.展开更多
Fe-3Si steel strip was produced by thin slab casting and rolling （TSCR） process in the laboratory. The microstructure and texture of hot rolled strip by different total reduction and rolling schedules were observed ...Fe-3Si steel strip was produced by thin slab casting and rolling （TSCR） process in the laboratory. The microstructure and texture of hot rolled strip by different total reduction and rolling schedules were observed through EBSD technique and X-ray diffraction method. The rule of texture density for the a,ε and γ fibers was analyzed. When the total reduction was increased from 82.9% to 97.1%, the gradient of microstrueture and texture for A steel surface layer and center layer was found, {001}〈110〉 texture had higher intensity, and {001}〈110〉texture was changed to { 110 } 〈 001 〉 and { 112 } 〈 111 〉. The texture distribution with different reduction schedules for B steel was basically similar, but the Goss texture orientation density and volume fraction for B steel were higher, the hot rolling reduction schedule of C1 was effective for the formation of Goss texture. The research work was useful theoretical basis and reference data to develop electrical steel by thin slab continuous casting and direct rolling technology.展开更多
The hot rolled strip of Fe-3Si steel was experimentally produced by thin slab casting and rolling（TSCR） process in the laboratory.The texture evolution rule was investigated during hot rolling and cold rolling.The t...The hot rolled strip of Fe-3Si steel was experimentally produced by thin slab casting and rolling（TSCR） process in the laboratory.The texture evolution rule was investigated during hot rolling and cold rolling.The texture distribution of cold rolled strips with four kinds of cold rolling reduction schedules was observed through X-ray diffraction method,and the orientation density variation of 1/16 layer,1/8 layer,1/4 layer,and 1/2 layer in thickness was analyzed.The cold rolled texture of steel A with four kinds of cold rolling reduction schedules was mainly composed of α and γ fibers.Cold rolling reduction ratio of 70% was more beneficial for obtaining more γ fibers.The γ fiber texture orientation density of {111}01-1 and {111}1-1-2 was the largest on the 1/8 layer and 1/4 layer and the least on the 1/16 layer and 1/2 layer for steel B.The texture orientation density of {001}-{223}11-0 in the α fibers for steel C was increased,but the texture orientation density of {332}-{110}11-0 was low.展开更多
Based on the characteristics of Thin slab casting and rolling (TSCR) process,using test methods such as SEM,EDS and measuring content of inclusions, the influencing factor of controlling inclusions during producing mi...Based on the characteristics of Thin slab casting and rolling (TSCR) process,using test methods such as SEM,EDS and measuring content of inclusions, the influencing factor of controlling inclusions during producing middle and high carbon steel was studied. The technologies of electric furnace smelting, LF refining and controlling inclusions of tundish were proposed. The inclusions control level of middle and high carbon steel in which the carbon content is 0.3-1.0%, The level reached and even exceeded the level of like product producing with conventional process at home and abroad.展开更多
文摘Combined with the technological characteristics of thin slab continuous rolling process （TSCR）, dynamic recrystallization of an extremely coarse austenite of low carbon steel is studied by Thermecmaster-Z hot simulator. By the analysis of true stress-strain curves and the observation of microstructures at different deformation stages, the critical stress and critical strain are determined under different deformation conditions. The effect of Z parameter on dynamic recrystallization of coarse austenite is studied. The microstructure evolution in real production is also discussed.
文摘Based on load-oriented manufacturing control theory,different combining modes and slab storage calculation method for continuous casting and hot rolling were discussed.The buffer capacity index of continuous casting-rolling was introduced,and the reasonable slab storage under different combining modes was calculated with buffer capacity index of 120.00 hfor CCR,79.20 hfor HCR,19.68 hfor DHCR and 3.84 hfor DR.Thin slab is 1.20 h,and the strip is zero.Theory gist was provided for steel enterprise to decrease storage.
文摘研究了模拟薄板坯连铸连轧工艺(Thin Slab Casting and Rolling)生产Ti-IF钢的析出行为。利用透射电镜分析了铸坯连续快速冷却及热连轧过程Ti-IF钢中第二相粒子的析出行为特征,将TiS,Ti4C2S2等析出粒子的尺寸、分布及数量分别与传统工艺的析出物进行了分析比较。结果表明,TSCR生产的Ti-IF钢析出物比传统工艺更为粗大,且发现有较粗大的TiC和Ti4C2S2的复合析出物。
基金Item Sponsored by National Natural Science Foundation of China(50175095)
文摘Based on load-oriented manufacturing control theory, different combining modes and slab storage calculation method for continuous casting and hot rolling were discussed. The buffer capacity index of continuous casting-rolling was introduced, and the reasonable slab storage under different combining modes was calculated with buffer capacity index of 120.00 h for CCR, 79.20 h for HCR, 19.68 h for DHCR and 3.84 h for DR. Thin slab is 1.20 h, and the strip is zero. Theory gist was provided for steel enterprise to decrease storage.
文摘The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stirring. The transient electromagnetic field distribution and the induced electromagnetic force were numerically described. The effects of stirring current, stirring frequency, and different stirrer configurations on the electromagnetically driven flow field in the strand were investigated and the optimization of the stirring parameters was discussed by performing a relative comparison of numerical results. Results show that the in-roller type strand electromagnetic stirrer （S- EMS） pair generates the fluctuating magnetic fields, penetrating through the cast slab and periodically parallel shift- ing along the slab wide face w!th time evolution. The transient induced electromagnetic forces travels toward the magnetic flux shifting direction, Different stirring parameters （i. e. current and frequency） and stirrer configurations affect the stirring strength and the flow rbcirculation pattern in the strand, which are closely related to metallurgical performances of the stirrers. There is an optimum frequency to obtain the maximum stirring. The present model pro vides a relatively theoretical insight into the in-roll type strand electromagnetic stirring system for best operating.
基金Item Sponsored by National Natural Science Foundation of China(50534020)
文摘Fe-3Si steel strip was produced by thin slab casting and rolling （TSCR） process in the laboratory. The microstructure and texture of hot rolled strip by different total reduction and rolling schedules were observed through EBSD technique and X-ray diffraction method. The rule of texture density for the a,ε and γ fibers was analyzed. When the total reduction was increased from 82.9% to 97.1%, the gradient of microstrueture and texture for A steel surface layer and center layer was found, {001}〈110〉 texture had higher intensity, and {001}〈110〉texture was changed to { 110 } 〈 001 〉 and { 112 } 〈 111 〉. The texture distribution with different reduction schedules for B steel was basically similar, but the Goss texture orientation density and volume fraction for B steel were higher, the hot rolling reduction schedule of C1 was effective for the formation of Goss texture. The research work was useful theoretical basis and reference data to develop electrical steel by thin slab continuous casting and direct rolling technology.
基金Item Sponsored by National Natural Science Foundation of China(50534020)
文摘The hot rolled strip of Fe-3Si steel was experimentally produced by thin slab casting and rolling（TSCR） process in the laboratory.The texture evolution rule was investigated during hot rolling and cold rolling.The texture distribution of cold rolled strips with four kinds of cold rolling reduction schedules was observed through X-ray diffraction method,and the orientation density variation of 1/16 layer,1/8 layer,1/4 layer,and 1/2 layer in thickness was analyzed.The cold rolled texture of steel A with four kinds of cold rolling reduction schedules was mainly composed of α and γ fibers.Cold rolling reduction ratio of 70% was more beneficial for obtaining more γ fibers.The γ fiber texture orientation density of {111}01-1 and {111}1-1-2 was the largest on the 1/8 layer and 1/4 layer and the least on the 1/16 layer and 1/2 layer for steel B.The texture orientation density of {001}-{223}11-0 in the α fibers for steel C was increased,but the texture orientation density of {332}-{110}11-0 was low.
文摘Based on the characteristics of Thin slab casting and rolling (TSCR) process,using test methods such as SEM,EDS and measuring content of inclusions, the influencing factor of controlling inclusions during producing middle and high carbon steel was studied. The technologies of electric furnace smelting, LF refining and controlling inclusions of tundish were proposed. The inclusions control level of middle and high carbon steel in which the carbon content is 0.3-1.0%, The level reached and even exceeded the level of like product producing with conventional process at home and abroad.
