Nd^3＋： Gd3Ga5O12（Nd ： GGG） nanopowder for transparent laser ceramics was synthesized using sol-gel method. XRD, SEM, and fluorescence spectrum were used to study the properties of Nd^3＋ ：Gd3Ga5O12 nanopowder. X...Nd^3＋： Gd3Ga5O12（Nd ： GGG） nanopowder for transparent laser ceramics was synthesized using sol-gel method. XRD, SEM, and fluorescence spectrum were used to study the properties of Nd^3＋ ：Gd3Ga5O12 nanopowder. XRD patterns of samples show that it has a cubic structure. Meanwhile, pure Nd：GGG crystals were obtained at 1000 ℃ for 12 h. SEM photographs show that dispersed, uniform, ball-like Nd：GGG nanopowder is obtained. Both XRD and SEM results show that the crystallization degree and the grain size increase with the increase in calcining temperature. Analysis of fluorescence spectrum shows that fluorescence emission occurs at 1062.7 nm, which is the result of Nd^3＋ （^4F3/2→^4I11/2） transition. Homogenous Nd ： GGG nanopewder with a small grain size synthesized using the sol-gel method is favorable for sintering the transparent ceramic, which proves that the nanopewder obtained is suitable as a precursor for preparing GGG transparent ceramics.展开更多
实现高发光效率、高亮度和良好的热稳定性是固态照明的迫切要求。因此,用于高功率发光二极管或激光二极管(LED/LD)的高性能荧光转换材料具有重要的研究意义。在这项工作中,通过将Lu^(3+)离子引入YAG∶Ce荧光陶瓷中方法作为有效策略来改...实现高发光效率、高亮度和良好的热稳定性是固态照明的迫切要求。因此,用于高功率发光二极管或激光二极管(LED/LD)的高性能荧光转换材料具有重要的研究意义。在这项工作中,通过将Lu^(3+)离子引入YAG∶Ce荧光陶瓷中方法作为有效策略来改善YAG∶Ce荧光材料的发光性能。采用固相反应和真空烧结法制Article ID:1000-7032(2023)06-0964^(-1)1收稿日期:2022^(-1)2-31;修订日期:2023-01-30基金项目:中国科学院战略性先导科技专项(XDA22010301)Supported by The Strategic Priority Research Program of The Chinese Academy of Sciences(XDA22010301)第6 HUANG Xinyou期,et al.:LuYAG∶Ce Transparent Ceramic Phosphors for High-brightness Solid-state…备了不同Lu^(3+)含量的(Lu,Y)_(3)Al_(5)O_(12)∶Ce荧光陶瓷(LuYAG∶Ce荧光陶瓷)。随着Lu^(3+)含量的增加,LuYAG∶Ce荧光陶瓷中的Y^(3+)位点被Lu^(3+)位点取代,Ce^(3+)的发射峰呈现从573 nm到563 nm的蓝移现象。当Lu^(3+)含量为60%时,通过将LuYAG∶Ce荧光陶瓷与蓝光LED组合,其发光强度达到最大值,流明效率达到114 lm∙W^(-1)。使用450 nm激光源与LuYAG∶Ce荧光陶瓷构建了透射模式下的激光驱动照明装置。随着功率密度从2.2 W·mm^(-2)增加到39 W·mm^(-2),Lu^(3+)含量为60%的荧光陶瓷光通量从128 lm增加到1874 lm,且没有发光饱和的迹象,最佳发光效率达到128 lm·W^(-1)。因此,LuYAG∶Ce荧光陶瓷有望成为高功率LED/LD照明的潜在荧光转换材料。展开更多
针对高码率低轨卫星测控的需求,给出了一种新型三轴12 m X/Ka频段天线的设计思路,通过优化反射面结构型式、材料选择、力学分析、减轻重量,提高天线反射体的精度;进行天线座架驱动链路设计和刚度设计,提高天线系统的谐振频率;通过优化...针对高码率低轨卫星测控的需求,给出了一种新型三轴12 m X/Ka频段天线的设计思路,通过优化反射面结构型式、材料选择、力学分析、减轻重量,提高天线反射体的精度;进行天线座架驱动链路设计和刚度设计,提高天线系统的谐振频率;通过优化伺服控制与伺服选型设计,提高伺服跟踪控制性能。基于Nastran/Patran有限元软件,对多种工况下的天线承载结构进行了刚度分析、强度分析、面型精度分析与结构固有频率等分析,结果表明典型仰角下的天线主面精度、承载能力及谐振频率均满足要求。依据有限元分析结果,采用高精度碳纤维天线反射体、高刚度A-E-T三轴天线座架、大动态伺服控制的设计方案,合理设计了12 m反射面天线的整体结构形式以及连接形式,并进行了天线实物的加工。所设计加工的12 m反射面天线满足高精度、高刚度、过顶跟踪的性能指标要求,对中大口径天线的设计具有一定的参考意义。展开更多
Rare earth ion-doped Y_(3)Al_(5)O_(12)(YAG)-based transparent ceramics have been used as important laser gain media for a long time,yet the doping concentration of active ions is limited due to concentration quenching...Rare earth ion-doped Y_(3)Al_(5)O_(12)(YAG)-based transparent ceramics have been used as important laser gain media for a long time,yet the doping concentration of active ions is limited due to concentration quenching,wherein the inflexion concentration quenching of Nd^(3+)is recognized as 1.0 at%.In this work,YAG-Al_(2)O_(3) nanocrystalline transparent ceramics with a concentration of Nd^(3+)(O-5.0 at%)were fabricated via amorphous crystallization,and the crystal structure evolution,morphology,and optical properties were systematically investigated by differential scanning calorimetry(DSC),X-ray powder diffraction(XRD),transmission electron microscopy(TEM),magnetic resonation(MAS),nuclear magnetic resonation(NMR),and fluorescence spectroscopy.The doping of Nd^(3+)can promote the transition of Al[5]and Al[6]to Al[14],indicating improvements in the ability of the amorphous material to form Nd^(3+):Y_(2)O_(3)-Al_(2)O_(3) vitrified beads,and 1.5 at%Nd^(3+):YAG-Al_(2)O_(3) nanocrystalline transparent ceramics can be obtained by crystallization at 1050℃ with a matrix composed of YAG and concomitant δ-Al_(2)O_(3) and θ-Al_(2)O_(3).The nanocrystalline transparent ceramics show an internal transmitance of 89.56%at 1064 nm,and the strongest emission peak corresponds to the energy transfer from 4F_(3/2) to 4l_(11/2) of Nd^(3+)with a fluorescence lifetime of 231μs when pumped by an 808 nm laser.Specifically,spectral broadening begins to occur,indicating the onset of concentration quenching,when the concentration of Nd^(3+)exceeds 1.5 at%,substantially higher than the 1.0 at% observed in YAG ceramics.YAG-Al_(2)O_(3) nanocrystalline transparent ceramics obtained by amorphous crystalization can be utilized as the matrix to increase the inflexion point of doping concentration quenching of Nd^(3+),and this material may have great potential as a laser gain medium.展开更多
Compared with Y_(3)Al_(5)O_(12):Ce^(3+),Y3MgAl3SiO12:Ce^(3+)(YMASG:Ce^(3+))reveals great potential for highpower white lighting with red-shift spectrum.Herein,YMASG:Ce^(3+)transparent ceramics were explored to be synt...Compared with Y_(3)Al_(5)O_(12):Ce^(3+),Y3MgAl3SiO12:Ce^(3+)(YMASG:Ce^(3+))reveals great potential for highpower white lighting with red-shift spectrum.Herein,YMASG:Ce^(3+)transparent ceramics were explored to be synthesized in the air following hot isostatic pressure(HIP)treatment to obtain tunable and optimized optical properties.Then phase purity,microstructure,transmittance,and photoluminescence of YMASG:Ce^(3+)ceramics were investigated.The emission peak of YMASG:Ce^(3+)transparent ceramic can be tuned from 573 to 592 nm with the variation of Ce^(3+)doping concentration.It should be noted that this YMASG:0.2 at%Ce^(3+)transparent ceramic with emission peak at 579 nm under 450 nm excitation exhibits the highest internal/external quantum efficiency(72%/65%).The white LED device using YMASG:0.2 at%Ce^(3+)transparent ceramic with a 0.4 mm thickness demonstrates a luminous efficiency(LE)of 106 lm/W,correlated color temperature of 3158 K,and color coordinate(0.3933,0.3265).Thermal stability can be significantly imporoved by the incorporation of Lu^(3+)in YMASG transparent ceramic,and the Y3-yLuyMgAl3SiO12:0.2 at/Ce^(3+)(y=0-2.5)transparent ceramics were fabricated.The highest thermal stability(88%@150℃of the integrated emission intensity at 25℃)can be achieved wheny=2.5.The maximum LE of 154 Im/W can be obtained from Y_(0.5)Lu_(2.5)MgAl_(3)SiO_(12):0.2 at%Ce^(3+)transparent ceramic.These results indicate that YMASG:Ce^(3+)transparent ceramics with optimized properties can be regarded as an encouraging candidate for highpower white lighting.展开更多
基金Project supported bythe Nature Science Foundation of Jilin Province (20000516)
文摘Nd^3＋： Gd3Ga5O12（Nd ： GGG） nanopowder for transparent laser ceramics was synthesized using sol-gel method. XRD, SEM, and fluorescence spectrum were used to study the properties of Nd^3＋ ：Gd3Ga5O12 nanopowder. XRD patterns of samples show that it has a cubic structure. Meanwhile, pure Nd：GGG crystals were obtained at 1000 ℃ for 12 h. SEM photographs show that dispersed, uniform, ball-like Nd：GGG nanopowder is obtained. Both XRD and SEM results show that the crystallization degree and the grain size increase with the increase in calcining temperature. Analysis of fluorescence spectrum shows that fluorescence emission occurs at 1062.7 nm, which is the result of Nd^3＋ （^4F3/2→^4I11/2） transition. Homogenous Nd ： GGG nanopewder with a small grain size synthesized using the sol-gel method is favorable for sintering the transparent ceramic, which proves that the nanopewder obtained is suitable as a precursor for preparing GGG transparent ceramics.
文摘实现高发光效率、高亮度和良好的热稳定性是固态照明的迫切要求。因此,用于高功率发光二极管或激光二极管(LED/LD)的高性能荧光转换材料具有重要的研究意义。在这项工作中,通过将Lu^(3+)离子引入YAG∶Ce荧光陶瓷中方法作为有效策略来改善YAG∶Ce荧光材料的发光性能。采用固相反应和真空烧结法制Article ID:1000-7032(2023)06-0964^(-1)1收稿日期:2022^(-1)2-31;修订日期:2023-01-30基金项目:中国科学院战略性先导科技专项(XDA22010301)Supported by The Strategic Priority Research Program of The Chinese Academy of Sciences(XDA22010301)第6 HUANG Xinyou期,et al.:LuYAG∶Ce Transparent Ceramic Phosphors for High-brightness Solid-state…备了不同Lu^(3+)含量的(Lu,Y)_(3)Al_(5)O_(12)∶Ce荧光陶瓷(LuYAG∶Ce荧光陶瓷)。随着Lu^(3+)含量的增加,LuYAG∶Ce荧光陶瓷中的Y^(3+)位点被Lu^(3+)位点取代,Ce^(3+)的发射峰呈现从573 nm到563 nm的蓝移现象。当Lu^(3+)含量为60%时,通过将LuYAG∶Ce荧光陶瓷与蓝光LED组合,其发光强度达到最大值,流明效率达到114 lm∙W^(-1)。使用450 nm激光源与LuYAG∶Ce荧光陶瓷构建了透射模式下的激光驱动照明装置。随着功率密度从2.2 W·mm^(-2)增加到39 W·mm^(-2),Lu^(3+)含量为60%的荧光陶瓷光通量从128 lm增加到1874 lm,且没有发光饱和的迹象,最佳发光效率达到128 lm·W^(-1)。因此,LuYAG∶Ce荧光陶瓷有望成为高功率LED/LD照明的潜在荧光转换材料。
文摘针对高码率低轨卫星测控的需求,给出了一种新型三轴12 m X/Ka频段天线的设计思路,通过优化反射面结构型式、材料选择、力学分析、减轻重量,提高天线反射体的精度;进行天线座架驱动链路设计和刚度设计,提高天线系统的谐振频率;通过优化伺服控制与伺服选型设计,提高伺服跟踪控制性能。基于Nastran/Patran有限元软件,对多种工况下的天线承载结构进行了刚度分析、强度分析、面型精度分析与结构固有频率等分析,结果表明典型仰角下的天线主面精度、承载能力及谐振频率均满足要求。依据有限元分析结果,采用高精度碳纤维天线反射体、高刚度A-E-T三轴天线座架、大动态伺服控制的设计方案,合理设计了12 m反射面天线的整体结构形式以及连接形式,并进行了天线实物的加工。所设计加工的12 m反射面天线满足高精度、高刚度、过顶跟踪的性能指标要求,对中大口径天线的设计具有一定的参考意义。
基金This work was financially supported by the National Natural Science Foundation of China(No.51972018).
文摘Rare earth ion-doped Y_(3)Al_(5)O_(12)(YAG)-based transparent ceramics have been used as important laser gain media for a long time,yet the doping concentration of active ions is limited due to concentration quenching,wherein the inflexion concentration quenching of Nd^(3+)is recognized as 1.0 at%.In this work,YAG-Al_(2)O_(3) nanocrystalline transparent ceramics with a concentration of Nd^(3+)(O-5.0 at%)were fabricated via amorphous crystallization,and the crystal structure evolution,morphology,and optical properties were systematically investigated by differential scanning calorimetry(DSC),X-ray powder diffraction(XRD),transmission electron microscopy(TEM),magnetic resonation(MAS),nuclear magnetic resonation(NMR),and fluorescence spectroscopy.The doping of Nd^(3+)can promote the transition of Al[5]and Al[6]to Al[14],indicating improvements in the ability of the amorphous material to form Nd^(3+):Y_(2)O_(3)-Al_(2)O_(3) vitrified beads,and 1.5 at%Nd^(3+):YAG-Al_(2)O_(3) nanocrystalline transparent ceramics can be obtained by crystallization at 1050℃ with a matrix composed of YAG and concomitant δ-Al_(2)O_(3) and θ-Al_(2)O_(3).The nanocrystalline transparent ceramics show an internal transmitance of 89.56%at 1064 nm,and the strongest emission peak corresponds to the energy transfer from 4F_(3/2) to 4l_(11/2) of Nd^(3+)with a fluorescence lifetime of 231μs when pumped by an 808 nm laser.Specifically,spectral broadening begins to occur,indicating the onset of concentration quenching,when the concentration of Nd^(3+)exceeds 1.5 at%,substantially higher than the 1.0 at% observed in YAG ceramics.YAG-Al_(2)O_(3) nanocrystalline transparent ceramics obtained by amorphous crystalization can be utilized as the matrix to increase the inflexion point of doping concentration quenching of Nd^(3+),and this material may have great potential as a laser gain medium.
基金supported by the National Natural Science Foundation of China(51972304,51971208)Beijing Municipal Science and Technology Project(Z191100004819002)The Project of Scientific Experiment on Chinese Manned Space Station,China。
文摘Compared with Y_(3)Al_(5)O_(12):Ce^(3+),Y3MgAl3SiO12:Ce^(3+)(YMASG:Ce^(3+))reveals great potential for highpower white lighting with red-shift spectrum.Herein,YMASG:Ce^(3+)transparent ceramics were explored to be synthesized in the air following hot isostatic pressure(HIP)treatment to obtain tunable and optimized optical properties.Then phase purity,microstructure,transmittance,and photoluminescence of YMASG:Ce^(3+)ceramics were investigated.The emission peak of YMASG:Ce^(3+)transparent ceramic can be tuned from 573 to 592 nm with the variation of Ce^(3+)doping concentration.It should be noted that this YMASG:0.2 at%Ce^(3+)transparent ceramic with emission peak at 579 nm under 450 nm excitation exhibits the highest internal/external quantum efficiency(72%/65%).The white LED device using YMASG:0.2 at%Ce^(3+)transparent ceramic with a 0.4 mm thickness demonstrates a luminous efficiency(LE)of 106 lm/W,correlated color temperature of 3158 K,and color coordinate(0.3933,0.3265).Thermal stability can be significantly imporoved by the incorporation of Lu^(3+)in YMASG transparent ceramic,and the Y3-yLuyMgAl3SiO12:0.2 at/Ce^(3+)(y=0-2.5)transparent ceramics were fabricated.The highest thermal stability(88%@150℃of the integrated emission intensity at 25℃)can be achieved wheny=2.5.The maximum LE of 154 Im/W can be obtained from Y_(0.5)Lu_(2.5)MgAl_(3)SiO_(12):0.2 at%Ce^(3+)transparent ceramic.These results indicate that YMASG:Ce^(3+)transparent ceramics with optimized properties can be regarded as an encouraging candidate for highpower white lighting.
