A wideband CMOS variable gain low noise amplifier（VGLNA） based on a single-to-differential（S2D） stage and resistive attenuator is presented for TV tuner applications.Detailed analysis of input matching,noise figur...A wideband CMOS variable gain low noise amplifier（VGLNA） based on a single-to-differential（S2D） stage and resistive attenuator is presented for TV tuner applications.Detailed analysis of input matching,noise figure（NF） and linearity for S2D is given.A highly linear passive resistive attenuator is proposed to provide 6 dB attenuation and input matching for each gain stage.The chip was fabricated by a 0.18μm 1P6M CMOS process, and the measurements show that the VGLNA covers a gain range over 36.4 dB and achieves a maximum gain of 21.3 dB,a minimum NF of 3.0 dB,an IIP3 of 0.9 dBm and an IIP2 of 26.3 dBm at high gain mode with a power consumption less than 10 mA from a 1.8 V supply.展开更多
This paper presents a channel-select filter that employs an active-RC bi-quad structure for TV-tuner application. A design method to optimize the IIP3 of the bi-quad is developed. Multi-band selection and gain adjustm...This paper presents a channel-select filter that employs an active-RC bi-quad structure for TV-tuner application. A design method to optimize the IIP3 of the bi-quad is developed. Multi-band selection and gain adjustment are implemented using switching resistors in the resistor array and capacitors in the capacitor array. Q-factor degradation is compensated by a tuning segmented resistor. A feed-forward OTA with high gain and low third-order distortion is applied in the bi-quad to maximize linearity performance and minimize area by avoiding extra compensation capacitor use. An RC tuning circuit and DC offset cancellation circuit are designed to overcome the process variation and DC offset, respectively. The experimental results yield an in-band IIP3 of more than 31 dBm at 0 dB gain, a 54 dB gain range with 6 dB gain step, and a continuous frequency tuning range from 0.25 to 4 MHz. The in-band ripple is less than 1.4 dB at high gain mode, while the gain error and frequency tuning error are no more than 3.4% and 5%, respectively. The design, which is fabricated in a 0.18 μm CMOS process, consumes 12.6 mW power at a 1.8 V supply and occupies 1.28 mm2.展开更多
基金Project supported by the National Science Funding of China(No.60876019)the National S&T Major Project of China(No.2009ZX0131- 002-003-02)+2 种基金the Shanghai Rising-Star Program,China(No.09QA 1400300)the National Scientists and Engineers Service for Enterprise Program,China(No.2009GJC00046)the ASIC State-Key Laboratory Funding,China(No.09MS007)
文摘A wideband CMOS variable gain low noise amplifier（VGLNA） based on a single-to-differential（S2D） stage and resistive attenuator is presented for TV tuner applications.Detailed analysis of input matching,noise figure（NF） and linearity for S2D is given.A highly linear passive resistive attenuator is proposed to provide 6 dB attenuation and input matching for each gain stage.The chip was fabricated by a 0.18μm 1P6M CMOS process, and the measurements show that the VGLNA covers a gain range over 36.4 dB and achieves a maximum gain of 21.3 dB,a minimum NF of 3.0 dB,an IIP3 of 0.9 dBm and an IIP2 of 26.3 dBm at high gain mode with a power consumption less than 10 mA from a 1.8 V supply.
文摘This paper presents a channel-select filter that employs an active-RC bi-quad structure for TV-tuner application. A design method to optimize the IIP3 of the bi-quad is developed. Multi-band selection and gain adjustment are implemented using switching resistors in the resistor array and capacitors in the capacitor array. Q-factor degradation is compensated by a tuning segmented resistor. A feed-forward OTA with high gain and low third-order distortion is applied in the bi-quad to maximize linearity performance and minimize area by avoiding extra compensation capacitor use. An RC tuning circuit and DC offset cancellation circuit are designed to overcome the process variation and DC offset, respectively. The experimental results yield an in-band IIP3 of more than 31 dBm at 0 dB gain, a 54 dB gain range with 6 dB gain step, and a continuous frequency tuning range from 0.25 to 4 MHz. The in-band ripple is less than 1.4 dB at high gain mode, while the gain error and frequency tuning error are no more than 3.4% and 5%, respectively. The design, which is fabricated in a 0.18 μm CMOS process, consumes 12.6 mW power at a 1.8 V supply and occupies 1.28 mm2.
