期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
伊朗TABNAK气田低压裂缝性地层泡沫钻井液技术 被引量:8
1
作者 刘德胜 陈星元 +3 位作者 陈光 王奎才 申威 苑旭波 《钻井液与完井液》 CAS 北大核心 2003年第3期1-3,共3页
伊朗TABNAK气田地层岩性以灰岩和白云岩为主,石膏夹层较多;碳酸盐岩地层裂缝发育,连通性好,漏失严重;海平面以上是干层,无孔隙压力,海平面以下至井深2450 m是盐水层。长城钻井公司采用了空气-泡沫钻井流体,即:空气粉尘、雾化空气、稳定... 伊朗TABNAK气田地层岩性以灰岩和白云岩为主,石膏夹层较多;碳酸盐岩地层裂缝发育,连通性好,漏失严重;海平面以上是干层,无孔隙压力,海平面以下至井深2450 m是盐水层。长城钻井公司采用了空气-泡沫钻井流体,即:空气粉尘、雾化空气、稳定泡沫钻井液和硬胶泡沫钻井液。通过实验,优选出发泡体积大、稳定时间长、抗盐抗钙能力强和耐温性能好的发泡剂和稳定泡沫液及硬胶泡沫液配方。现场应用表明,空气-泡沫钻井流体密度低;钻速快,平均机械钻速是常规钻井液的3~5倍;携砂性好,井眼清洁;能顺利穿过严重漏失地层。其中,空气粉尘用于干层钻进,速度快,无钻井液材料消耗,但必须有足够的空气排量;雾化空气适用于出水量较小的水层,但需要的空气排量更大,而且对钻具腐蚀太严重;泡沫钻井液适用于低压干层和水层,需要的空气排量较小,钻速快,抗盐钙和携砂能力强。 展开更多
关键词 伊朗 tabnak气田 低压裂缝性地层 泡沫钻井液 井眼净化 井漏
下载PDF
空气钻井在TABNAK气田的合理应用 被引量:10
2
作者 刘德胜 赵曙光 《石油钻采工艺》 CAS CSCD 北大核心 2003年第1期18-20,共3页
空气泡沫钻井 ,因其钻速快 ,防漏效果好 ,具有常规钻井液不可比拟的优越性。空气粉尘钻井在干硬地层机械钻速达到 16 .2 4m/h。雾化钻井在出水量较小时 ,钻速为 13.16m/h ,当地层出水较多 ,空气压力较高时 ,其钻井速度为 6 .5 2m/h ,与... 空气泡沫钻井 ,因其钻速快 ,防漏效果好 ,具有常规钻井液不可比拟的优越性。空气粉尘钻井在干硬地层机械钻速达到 16 .2 4m/h。雾化钻井在出水量较小时 ,钻速为 13.16m/h ,当地层出水较多 ,空气压力较高时 ,其钻井速度为 6 .5 2m/h ,与泡沫钻井速度 (5 .2 3~ 6 .6 3m/h)相当。但泡沫钻井腐蚀钻具轻微 ,而雾化钻井腐蚀钻具严重。因此 ,必须根据地层情况选择合适的钻井液 ,既要提高机械钻速 ,又要保护钻具 ,提高综合经济效益。 展开更多
关键词 空气钻井 tabnak气田 雾化钻井 钻井速度 腐蚀 钻井液
下载PDF
TABNAK气田严重漏失气层随钻堵漏钻井液技术 被引量:5
3
作者 刘德胜 申威 +1 位作者 苑旭波 白振宇 《钻井液与完井液》 CAS 北大核心 2004年第5期22-26,共5页
TABNAK气田碳酸盐岩地层气层压力低 ,仅为 0 .86~ 0 .91MPa/ 10 0m ,裂缝发育 ,钻井过程中极易发生漏失和井喷。分别采用了LCM段塞堵漏、水泥浆堵漏和LCM随钻堵漏措施。经TBK气田 17口井钻井实践表明 ,TBK气田灰岩地层裂缝很窄 ,LCM段... TABNAK气田碳酸盐岩地层气层压力低 ,仅为 0 .86~ 0 .91MPa/ 10 0m ,裂缝发育 ,钻井过程中极易发生漏失和井喷。分别采用了LCM段塞堵漏、水泥浆堵漏和LCM随钻堵漏措施。经TBK气田 17口井钻井实践表明 ,TBK气田灰岩地层裂缝很窄 ,LCM段塞堵漏很容易封住裂缝 ,但有效期很短 ,当裂缝表面的LCM被冲掉后 ,或新地层再次出现裂缝时 ,井漏现象继续发生 ;水泥浆堵漏有效期短 ,堵漏时间长 ,成本高 ;而LCM随钻堵漏钻井液 ,配制简单 ,即漏即堵 ,效果好 ,成本低 ,既节省时间 ,又节省材料 ,可满足TBK气田的钻井施工要求。 展开更多
关键词 随钻 tabnak气田 钻井液技术 气层 堵漏 水泥浆 井漏 碳酸盐岩地层 地层裂缝 漏失
下载PDF
Folding Style Analysis of the Tabnak Sweet Gas Field, Zagros, Iran 被引量:3
4
作者 Marzieh Badrkhani Zahra Maleki Mehran Arian 《Open Journal of Geology》 2016年第8期971-981,共11页
The Zagros fold-thrust belt in Iran is home to one of the enormous petroleum producing reservoirs in the word. The Tabnak gas field in this belt is one of the enormous sweet gas fields that discovered on the land. Thi... The Zagros fold-thrust belt in Iran is home to one of the enormous petroleum producing reservoirs in the word. The Tabnak gas field in this belt is one of the enormous sweet gas fields that discovered on the land. This anticlinal structure is located in the Coastal Fars sub-basin and is bounded from North by the Varavi gas field, from South by the Kuh-e Madar anticline, from East by Assaluyeh gas field and from West by Kuh-e Dehnow anticline. Its length is about 80 km and width is about 15 km. This structure is asymmetric anticline and is located with irregular near the Assaluyeh gas field. The Tabnak gas field is deepest structure between anticlines in the Coastal Fars area. This gas field has a special place for accommodating the enormous Hydrocarbon resources and for this reason, it is very important for Iran country. In this structure, the Dashtak, Kangan and upper Dalan Formations have Hydrocarbon. Analysis and description of fold style elements are essential for structural studies. Based on this case, the comparison of the fold styles and folding mechanism is possible. The main aim in this research is the analysis of the fold style elements of the Tabnak anticline for determining the folding pattern and tectonic regime on this structure. This case has very important for Hydrocarbon exploration between gas fields in the Fars area. In this research, we used the Tectonics FP software, Global Mapper software and geological maps and reports of Iranian National Oil Company. In addition, we used common classification of fold for indicating folding mechanism of the Tabnak anticlinal structure. Based on analysis of the fold style elements, the Tabnak anticlinal structure has variation in fold style. This structure has three different fold styles in different parts. The changes of fold axis, axial plane characteristics and fold classification confirmed several fold styles in different parts of the Tabnak anticline. These changes are observed specially in B-B', F-F' and G-G' sections of this anticline. It seems that these parts have been suffered more deformation in the study anticline. In addition, based on interlimb and folding angle, fold type is close type in all of parts. The close type required more accuracy, because the close type may be ensigns of complication regime. In the study area, G-G' and F-F' section of the Tabnak gas field probable show folding style changes have been affected by Gavbandy Paleo-high. 展开更多
关键词 tabnak Anticline Costal Fars Folding Style Gavbandi Paleo-High
下载PDF
伊朗TABNAK区块的钻井与固井技术 被引量:5
5
作者 王德坤 申威 +1 位作者 刘川生 陈光 《天然气工业》 EI CAS CSCD 北大核心 2007年第3期63-65,共3页
伊朗TABNAK区块地层含泥页岩、盐水、石膏且层间压力系数变化大,钻井中常出现页岩垮塌、井漏、缩径等井下复杂情况,固井中易出现水泥浆返高不足、注替效率极低等。针对钻井及固井难题,采用先进的钻井工艺、合理的钻井介质,并结合优化钻... 伊朗TABNAK区块地层含泥页岩、盐水、石膏且层间压力系数变化大,钻井中常出现页岩垮塌、井漏、缩径等井下复杂情况,固井中易出现水泥浆返高不足、注替效率极低等。针对钻井及固井难题,采用先进的钻井工艺、合理的钻井介质,并结合优化钻具组合和钻头选型等钻井技术措施,成功地解决了钻进中遇到的严重井漏、缩径、井涌等复杂情况,实现了安全快速钻进。通过优化水泥浆体系,采用合理简便的固井工艺技术,成功地解决了大尺寸井眼、低压漏失井的固井难题,提高了固井质量优质率。所介绍的TABNAK区块采用的钻井和固井技术,对类似地层情况的其他区块钻井和固井工作具有一定的指导作用。 展开更多
关键词 TANAK区块 钻井 井漏 钻头选型 固井 注水泥
下载PDF
GWDC's Application of Air Drilling in Tabnak Field,Iran Makes Great Success Story
6
《China Oil & Gas》 CAS 2004年第4期40-41,共2页
At the end of 2001, Great Wall Drilling Company Ltd started to execute the drilling service contract in Tabnak gas field, Southern Iran. This is a turnkey contract awarded by INOC and the basic contract work amount is... At the end of 2001, Great Wall Drilling Company Ltd started to execute the drilling service contract in Tabnak gas field, Southern Iran. This is a turnkey contract awarded by INOC and the basic contract work amount is to drill 19 wells and service 2 existing wells with a total estimated footage of 68400m. 展开更多
关键词 伊朗 长城钻井公司 油井 tabnak油田 空气钻井技术 钻井工程
下载PDF
气基流体钻井转换技术研究 被引量:2
7
作者 陈若铭 刘伟 +2 位作者 屈志伟 王坚 王开华 《石油钻采工艺》 CAS CSCD 北大核心 2010年第B11期58-62,共5页
气基流体钻井方式主要包括纯气体钻井、雾化钻井、泡沫钻井及充气泥浆钻井等,各钻井方式气液流量、气液比例相差较大,环空流态迥异,对地层的适应性,钻遇复杂事态时的应对措施及处理效果是不同的。在理论分析的基础上,结合大量实践,对气... 气基流体钻井方式主要包括纯气体钻井、雾化钻井、泡沫钻井及充气泥浆钻井等,各钻井方式气液流量、气液比例相差较大,环空流态迥异,对地层的适应性,钻遇复杂事态时的应对措施及处理效果是不同的。在理论分析的基础上,结合大量实践,对气基流体钻遇复杂情况时的钻井转换技术进行了系统剖析,形成了解决现场实际问题的工艺措施和方法。对伊朗TABNAK-3井气基流体钻井转换技术进行了介绍,为同类施工提供借鉴。 展开更多
关键词 气基流体钻井 钻井方式转换 伊朗tabnak-3井
下载PDF
气基流体钻井转换工艺研究
8
作者 陈若铭 刘伟 +2 位作者 屈志伟 王坚 王开华 《新疆石油天然气》 CAS 2010年第4期15-20,共6页
气基流体钻井方式主要包括纯气体钻井、雾化钻井、泡沫钻井及充气泥浆钻井等,各钻井方式气液流量、气液比例相差较大,环空流态迥异,对地层的适应性,钻遇复杂事态时的应对措施及处理效果是不同的。本论文在理论分析的基础上,结合大量实践... 气基流体钻井方式主要包括纯气体钻井、雾化钻井、泡沫钻井及充气泥浆钻井等,各钻井方式气液流量、气液比例相差较大,环空流态迥异,对地层的适应性,钻遇复杂事态时的应对措施及处理效果是不同的。本论文在理论分析的基础上,结合大量实践,对气基流体钻遇复杂情况时的钻井转换技术进行了系统剖析,形成了切实有效的解决现场实际问题的工艺措施和方法。另外,论文还对伊朗TABNAK-3井气基流体钻井转换技术进行了介绍。 展开更多
关键词 气基流体钻井 钻井方式转换 伊朗tabnak-3井
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部