In the domain of perovskite solar cells(PSCs),the imperative to reconcile impressive photovoltaic performance with lead-related issue and environmental stability has driven innovative solutions.This study pioneers an ...In the domain of perovskite solar cells(PSCs),the imperative to reconcile impressive photovoltaic performance with lead-related issue and environmental stability has driven innovative solutions.This study pioneers an approach that not only rectifies lead leakage but also places paramount importance on the attainment of rigorous interfacial passivation.Crown ethers,notably benzo-18-crown-6-ether(B18C6),were strategically integrated at the perovskite-hole transport material interface.Crown ethers exhibit a dual role:efficiently sequestering and immobilizing Pb^(2+)ions through host-guest complexation and simultaneously establishing a robust interfacial passivation layer.Selected crown ether candidates,guided by density functional theory(DFT)calculations,demonstrated proficiency in binding Pb2+ions and optimizing interfacial energetics.Photovoltaic devices incorporating these materials achieved exceptional power conversion efficiency(PCE),notably 21.7%for B18C6,underscoring their efficacy in lead binding and interfacial passivation.Analytical techniques,including time-of-flight secondary ion mass spectrometry(ToF-SIMS),ultraviolet photoelectron spectroscopy(UPS),time-resolved photoluminescence(TRPL),and transient absorption spectroscopy(TAS),unequivocally affirmed Pb^(2+)ion capture and suppression of non-radiative recombination.Notably,these PSCs maintained efficiency even after enduring 300 h of exposure to 85%relative humidity.This research underscores the transformative potential of crown ethers,simultaneously addressing lead binding and stringent interfacial passivation for sustainable PSCs poised to commercialize and advance renewable energy applications.展开更多
This paper introduces a new method of calculating crown projection area(CPA),the area of level ground covered by a vertical projection of a tree crown from measured crown radii through numerical interpolation and inte...This paper introduces a new method of calculating crown projection area(CPA),the area of level ground covered by a vertical projection of a tree crown from measured crown radii through numerical interpolation and integration.This novel method and other four existing methods of calculating CPA were compared using detailed crown radius measurements from 30 tall trees of Eucalyptus pilularis variable in crown size,shape,and asymmetry.The four existing methods included the polygonal approach and three ways of calculating CPA as the area of a circle using the arithmetic,geometric and quadratic mean radius.Comparisons were made across a sequence of eight non-consecutive numbers(from 2 to 16)of measured crown radii for each tree over the range of crown asymmetry of the 30 trees through generalized linear models and multiple comparisons of means.The sequence covered the range of the number of crown radii measured for calculating the CPA of a tree in the literature.A crown asymmetry index within the unit interval was calculated for each tree to serve as a normative measure.With a slight overestimation of 2.2%on average and an overall mean error size of 7.9%across the numbers of crown radii that were compared,our new method was the least biased and most accurate.Calculating CPA as a circle using the quadratic mean crown radius was the second best,which had an average overestimation of 4.5%and overall mean error size of 8.8%.These two methods remained by and large unbiased as crown asymmetry increased,while the other three methods showed larger bias of underestimation.For the conventional method of using the arithmetic mean crown radius to calculate CPA as a circle,bias correction factors were developed as a function of crown asymmetry index to delineate the increasing magnitude of bias associated with greater degrees of crown asymmetry.This study reveals and demonstrates such relationships between the accuracy of CPA calculations and crown asymmetry and will help increase awareness among researchers and practitioners on the existence of bias in their CPA calculations and for the need to use an unbiased method in the future.Our new method is recommended for calculating CPA where at least four crown radius measurements per tree are available because that is the minimum number required for its use.展开更多
Background In Central Europe,forests are increasingly affected by various disturbances,resulting in an increasing gap formation in the canopy.In order to support goal-oriented management,more knowledge is required abo...Background In Central Europe,forests are increasingly affected by various disturbances,resulting in an increasing gap formation in the canopy.In order to support goal-oriented management,more knowledge is required about the acclimation of the crown and its effects on the basal area growth of trees at the edge of a gap.Methods This work compared trees'growth and crown structure at the edge of a transient gap,with a gap size of more than 80m^(2),with trees in the stand that were at least 30m away from the gap.A total of 249 European beeches(Fagus sylvatica L.),Norway spruces(Picea abies L.Karst),Scots pines(Pinus sylvestris L.),oaks(Quercus spp.;Quercus petraea(Matt.)Liebl.,Quercus robur L.),and silver firs(Abies alba Mill.)were examined on long-term experimental plots in southern Germany.Various crown measures were developed and calculated using high-resolution terrestrial laser scanning(TLiDAR)to capture the three-dimensional crown structures.Growth responses to edge conditions were measured based on tree rings.Using linear mixed models,we predict the basal area increment of edge trees relative to trees in the stand under wet and dry soil moisture conditions after the gap formation.Results We identified i)species-specific acclimation of the crown of edge trees after the gap formation,ii)under wet soil moisture conditions a growth increase of 25%–45%for beech,pine,and oak edge trees and growth losses of 5%–60%for spruce and fir and iii)coniferous tree species benefited from the edge position regarding their basal area increment under dry soil moisture conditions and deciduous tree species grew regardless of the soil moisture conditions at the edge of a gap.Conclusion Gaps have a species-specific effect on the habitus and growth of edge trees and can have both positive and negative impacts on silviculture.展开更多
Eucalyptus forests are grown in many parts of the world for their commercial value and use in construction projects. Density management becomes im- portant as a means to attain the management goals in these forests. C...Eucalyptus forests are grown in many parts of the world for their commercial value and use in construction projects. Density management becomes im- portant as a means to attain the management goals in these forests. Changes in canopy and tree crown structure were quantified for Eucalyptus urophylla x E. grandis forests at different ages to determine when canopy closure occurs and the onset of competition begins. Site index was developed for these forests to determine whether site quality affects the canopy structure. Site index had little effect in the forests sampled, with the forest canopy on the better sites becoming slightly more elongated. Based upon crown projection ratio and crown diameter： dbh （diameter at breast height） ratio, it appears that crown closure occurs by age 4 years in these forests. The age at which this occurs was also checked and verified with the evaluation of relative spacing, RS （the ratio of the mean distance between trees to the average dominant height of the stand）. The RS value displayed a rapid decline until age 4 years, and then became relatively flat through age 21 years. The rapid height growth during the first 3 years with no change in density accounted for this rapid decrease. By age 4 years, reductions in the number of trees due to mortality began to have more of an influence on this value, resulting in a more gradual de- cline. The implications for management are discussed.展开更多
The compound [｛Pt4(en)4(NHCOtBu)4｝｛Tl(18-crown-6)｝2](PF6)6 has been synthesized by a simple one-potmulticomponent reaction. Its structure was determined by X-ray single crystal diffraction analysis. The cation oft...The compound [｛Pt4(en)4(NHCOtBu)4｝｛Tl(18-crown-6)｝2](PF6)6 has been synthesized by a simple one-potmulticomponent reaction. Its structure was determined by X-ray single crystal diffraction analysis. The cation ofthe compound consists of one linearly arranged [Pt4(en)4(NHCOtBu)4]4+ chain and two [Tl(18-crown-6)]+ ions located atthe two ends of the platinum chain. The complex crystallizes in a triclinic P1 with a=1.060 5(1), b=1.252 3(1), c=2.015(2) nm, α=107.430(2)°, β=91.032(2)°, γ=101.910(2)°, V=2.489 6(4) nm3, Z=2, R1=0.074 4, wR2(I>2σ(I))=0.2225, S=1.062. CCDC: 294083.展开更多
Objective] The study was aimed to improve the yield and quality of cashew. [Method] Through the comparative analysis, the survival rate, new germi-nation and yield characteristics of the cutting stems with different h...Objective] The study was aimed to improve the yield and quality of cashew. [Method] Through the comparative analysis, the survival rate, new germi-nation and yield characteristics of the cutting stems with different heights by stem grafting and bark grafting. [Result] The best cutting stem height of cashew should be in 100-150 cm, when the number of new germinated shoots was 85.5-87.7. Stem grafting could significantly improve the survival rate of the shooting branch （92.7%）, growth condition of which was better than that of bark grafting, and it also had no clip cortex. The yield of stem grafting was significantly higher than that of bark grafting, and it could reach up to 18.1 kg/plant in 4 years. The branches from stem grafting had significantly better ability in resisting the wind damage than those from bark grafting. [Conclusion] The study provided references for the crown grafting of cashew planting in China.展开更多
The program of the plate crown optimal prediction applied in the plate mill of Wuhan Iron and Steel(Group) Co. Ltd. is described. Optimal prediction is programmed in ALPHA 4000. The original profile, wear, expansion ...The program of the plate crown optimal prediction applied in the plate mill of Wuhan Iron and Steel(Group) Co. Ltd. is described. Optimal prediction is programmed in ALPHA 4000. The original profile, wear, expansion and deformation of work rolls are introduced into the program. The plate crown is controlled by the original profile of work rolls and the draft whose objective is the optimal plate crown. The run schedule is also optimized through the optimal prediction of the plate crown.展开更多
A flexible and adaptable design method for the tooth crown is presented based on the direct manipulation of free-form deformation （FFD）. The correct shape of the tooth crown can be obtained by adding, modifying, and...A flexible and adaptable design method for the tooth crown is presented based on the direct manipulation of free-form deformation （FFD）. The correct shape of the tooth crown can be obtained by adding, modifying, and deleting constraint points or load points based on stretching and compressing operation. Finally, an example is given to illustrate the method to be efficient.展开更多
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2021R1F1A1047203)financially supported by the Ministry of Trade,Industry and Energy(MOTIE)and Korea Institute for Advancement of Technology(KIAT)through the International Cooperative R&D program(P0026100)+1 种基金the NRF grant funded by the Korea government(MSIT)(2021R1I1A1A01061036)financial support from the NRF grant funded by the Korea government(MSIT)(RS-2023-00213920)。
文摘In the domain of perovskite solar cells(PSCs),the imperative to reconcile impressive photovoltaic performance with lead-related issue and environmental stability has driven innovative solutions.This study pioneers an approach that not only rectifies lead leakage but also places paramount importance on the attainment of rigorous interfacial passivation.Crown ethers,notably benzo-18-crown-6-ether(B18C6),were strategically integrated at the perovskite-hole transport material interface.Crown ethers exhibit a dual role:efficiently sequestering and immobilizing Pb^(2+)ions through host-guest complexation and simultaneously establishing a robust interfacial passivation layer.Selected crown ether candidates,guided by density functional theory(DFT)calculations,demonstrated proficiency in binding Pb2+ions and optimizing interfacial energetics.Photovoltaic devices incorporating these materials achieved exceptional power conversion efficiency(PCE),notably 21.7%for B18C6,underscoring their efficacy in lead binding and interfacial passivation.Analytical techniques,including time-of-flight secondary ion mass spectrometry(ToF-SIMS),ultraviolet photoelectron spectroscopy(UPS),time-resolved photoluminescence(TRPL),and transient absorption spectroscopy(TAS),unequivocally affirmed Pb^(2+)ion capture and suppression of non-radiative recombination.Notably,these PSCs maintained efficiency even after enduring 300 h of exposure to 85%relative humidity.This research underscores the transformative potential of crown ethers,simultaneously addressing lead binding and stringent interfacial passivation for sustainable PSCs poised to commercialize and advance renewable energy applications.
基金supported by the Natural Science Foundation of China (32071758)the Fundamental Research Funds for the Central Universities of China (No. 2572020BA01)
文摘This paper introduces a new method of calculating crown projection area(CPA),the area of level ground covered by a vertical projection of a tree crown from measured crown radii through numerical interpolation and integration.This novel method and other four existing methods of calculating CPA were compared using detailed crown radius measurements from 30 tall trees of Eucalyptus pilularis variable in crown size,shape,and asymmetry.The four existing methods included the polygonal approach and three ways of calculating CPA as the area of a circle using the arithmetic,geometric and quadratic mean radius.Comparisons were made across a sequence of eight non-consecutive numbers(from 2 to 16)of measured crown radii for each tree over the range of crown asymmetry of the 30 trees through generalized linear models and multiple comparisons of means.The sequence covered the range of the number of crown radii measured for calculating the CPA of a tree in the literature.A crown asymmetry index within the unit interval was calculated for each tree to serve as a normative measure.With a slight overestimation of 2.2%on average and an overall mean error size of 7.9%across the numbers of crown radii that were compared,our new method was the least biased and most accurate.Calculating CPA as a circle using the quadratic mean crown radius was the second best,which had an average overestimation of 4.5%and overall mean error size of 8.8%.These two methods remained by and large unbiased as crown asymmetry increased,while the other three methods showed larger bias of underestimation.For the conventional method of using the arithmetic mean crown radius to calculate CPA as a circle,bias correction factors were developed as a function of crown asymmetry index to delineate the increasing magnitude of bias associated with greater degrees of crown asymmetry.This study reveals and demonstrates such relationships between the accuracy of CPA calculations and crown asymmetry and will help increase awareness among researchers and practitioners on the existence of bias in their CPA calculations and for the need to use an unbiased method in the future.Our new method is recommended for calculating CPA where at least four crown radius measurements per tree are available because that is the minimum number required for its use.
基金funded by the Bavarian Ministry of Nutrition,Agriculture and Forestry through the projects“Acclimation of Forest Trees”(grant#kliffw006)“Maintenance and Monitoring of long term experiments”(W007,grant#Gz:7831-1/874).
文摘Background In Central Europe,forests are increasingly affected by various disturbances,resulting in an increasing gap formation in the canopy.In order to support goal-oriented management,more knowledge is required about the acclimation of the crown and its effects on the basal area growth of trees at the edge of a gap.Methods This work compared trees'growth and crown structure at the edge of a transient gap,with a gap size of more than 80m^(2),with trees in the stand that were at least 30m away from the gap.A total of 249 European beeches(Fagus sylvatica L.),Norway spruces(Picea abies L.Karst),Scots pines(Pinus sylvestris L.),oaks(Quercus spp.;Quercus petraea(Matt.)Liebl.,Quercus robur L.),and silver firs(Abies alba Mill.)were examined on long-term experimental plots in southern Germany.Various crown measures were developed and calculated using high-resolution terrestrial laser scanning(TLiDAR)to capture the three-dimensional crown structures.Growth responses to edge conditions were measured based on tree rings.Using linear mixed models,we predict the basal area increment of edge trees relative to trees in the stand under wet and dry soil moisture conditions after the gap formation.Results We identified i)species-specific acclimation of the crown of edge trees after the gap formation,ii)under wet soil moisture conditions a growth increase of 25%–45%for beech,pine,and oak edge trees and growth losses of 5%–60%for spruce and fir and iii)coniferous tree species benefited from the edge position regarding their basal area increment under dry soil moisture conditions and deciduous tree species grew regardless of the soil moisture conditions at the edge of a gap.Conclusion Gaps have a species-specific effect on the habitus and growth of edge trees and can have both positive and negative impacts on silviculture.
基金Supported by Undergraduate Research Abroad Program,Ohio State University,USA(11731-011000)~~
文摘Eucalyptus forests are grown in many parts of the world for their commercial value and use in construction projects. Density management becomes im- portant as a means to attain the management goals in these forests. Changes in canopy and tree crown structure were quantified for Eucalyptus urophylla x E. grandis forests at different ages to determine when canopy closure occurs and the onset of competition begins. Site index was developed for these forests to determine whether site quality affects the canopy structure. Site index had little effect in the forests sampled, with the forest canopy on the better sites becoming slightly more elongated. Based upon crown projection ratio and crown diameter： dbh （diameter at breast height） ratio, it appears that crown closure occurs by age 4 years in these forests. The age at which this occurs was also checked and verified with the evaluation of relative spacing, RS （the ratio of the mean distance between trees to the average dominant height of the stand）. The RS value displayed a rapid decline until age 4 years, and then became relatively flat through age 21 years. The rapid height growth during the first 3 years with no change in density accounted for this rapid decrease. By age 4 years, reductions in the number of trees due to mortality began to have more of an influence on this value, resulting in a more gradual de- cline. The implications for management are discussed.
文摘The compound [｛Pt4(en)4(NHCOtBu)4｝｛Tl(18-crown-6)｝2](PF6)6 has been synthesized by a simple one-potmulticomponent reaction. Its structure was determined by X-ray single crystal diffraction analysis. The cation ofthe compound consists of one linearly arranged [Pt4(en)4(NHCOtBu)4]4+ chain and two [Tl(18-crown-6)]+ ions located atthe two ends of the platinum chain. The complex crystallizes in a triclinic P1 with a=1.060 5(1), b=1.252 3(1), c=2.015(2) nm, α=107.430(2)°, β=91.032(2)°, γ=101.910(2)°, V=2.489 6(4) nm3, Z=2, R1=0.074 4, wR2(I>2σ(I))=0.2225, S=1.062. CCDC: 294083.
基金Supported by the National Nonprofit Institute Research Grant of CATAS-TCGRI(163003201503316300320140322016+1 种基金pzsfyl-201613)the Ministry of Agriculture Tropical Crop Germplasm Resources Protection(16RZZY-101)~~
文摘Objective] The study was aimed to improve the yield and quality of cashew. [Method] Through the comparative analysis, the survival rate, new germi-nation and yield characteristics of the cutting stems with different heights by stem grafting and bark grafting. [Result] The best cutting stem height of cashew should be in 100-150 cm, when the number of new germinated shoots was 85.5-87.7. Stem grafting could significantly improve the survival rate of the shooting branch （92.7%）, growth condition of which was better than that of bark grafting, and it also had no clip cortex. The yield of stem grafting was significantly higher than that of bark grafting, and it could reach up to 18.1 kg/plant in 4 years. The branches from stem grafting had significantly better ability in resisting the wind damage than those from bark grafting. [Conclusion] The study provided references for the crown grafting of cashew planting in China.
文摘The program of the plate crown optimal prediction applied in the plate mill of Wuhan Iron and Steel(Group) Co. Ltd. is described. Optimal prediction is programmed in ALPHA 4000. The original profile, wear, expansion and deformation of work rolls are introduced into the program. The plate crown is controlled by the original profile of work rolls and the draft whose objective is the optimal plate crown. The run schedule is also optimized through the optimal prediction of the plate crown.
文摘A flexible and adaptable design method for the tooth crown is presented based on the direct manipulation of free-form deformation （FFD）. The correct shape of the tooth crown can be obtained by adding, modifying, and deleting constraint points or load points based on stretching and compressing operation. Finally, an example is given to illustrate the method to be efficient.
