The forecasting efficiency under different selected regions by Pattern Informatics Method and seismic potential estimation in the North-South Seismic Zone

In 2022,four earthquakes with M_(S)≥6.0 including the Menyuan M_(S)6.9 and Luding M_(S)6.8 earthquakes occurred in the North-South Seismic Zone(NSSZ),which demonstrated high and strong seismicity.Pattern Informatics(PI)method,as an effective long and medium term earthquake forecasting method,has been applied to the strong earthquake forecasting in Chinese mainland and results have shown the positive performance.The earthquake catalog with magnitude above M_(S)3.0 since 1970 provided by China Earthquake Networks Center was employed in this study and the Receiver Operating Characteristic(ROC)method was applied to test the forecasting efficiency of the PI method in each selected region related to the North-South Seismic Zone systematically.Based on this,we selected the area with the best ROC testing result and analyzed the evolution process of the PI hotspot map reflecting the small seismic activity pattern prior to the Menyuan M_(S)6.9 and Luding M_(S)6.8 earthquakes.A“forward”forecast for the area was carried out to assess seismic risk.The study shows the following.1)PI forecasting has higher forecasting efficiency in the selected study region where the difference of seismicity in any place of the region is smaller.2)In areas with smaller differences of seismicity,the activity pattern of small earthquakes prior to the Menyuan M_(S)6.9 and Luding M_(S)6.8 earthquakes can be obtained by analyzing the spatio-temporal evolution process of the PI hotspot map.3)The hotspot evolution in and around the southern Tazang fault in the study area is similar to that prior to the strong earthquakes,which suggests the possible seismic hazard in the future.This study could provide some ideas to the seismic hazard assessment in other regions with high seismicity,such as Japan,Californi,Turkey,and Indonesia.

A 15-year-Long catalog of seismicity in the Eastern Tennessee Seismic Zone(ETSZ)using matched filter detection

We present a detailed catalog of 13671 earthquakes in the Eastern Tennessee Seismic Zone(ETSZ)that spans January 1,2005 to July 31,2020.We apply a matched filter detection technique on over 15 years of continuous data,resulting in arguably the most complete catalog of seismicity in the ETSZ yet.The magnitudes of newly detected events are determined by computing the amplitude ratio between the detections and templates using a principal component fit.We also compute the b-value for the new catalog and comparatively relocate a subset of newly detected events using XCORLOC and hypoDD,which shows a more defined structure at depth.We find the greatest concentration along and to the east of the New York-Alabama Lineament,as defined by the magnetic anomaly,supporting the argument that this feature likely is related to the generation of seismicity in the ETSZ.We examine seismicity in the vicinity of the Watts Bar Reservoir,which is located about 5 km from the epicenter of the M_(W) 4.4 December 12,2018 Decatur,Tennessee earthquake,and find possible evidence for reservoir modulated seismicity in this region.We also examine seismicity in the entire ETSZ to search for a correlation between shallow earthquakes and seasonal hydrologic changes.Our results show limited evidence for hydrologicallydriven shallow seismicity due to seasonal groundwater levels in the ETSZ,which contradicts previous studies hypothesizing that most intraplate earthquakes are associated with the dynamics of hydrologic cycles.

Fracture network characterisation of the Balmuccia peridotite using drone-based photogrammetry,implications for active-seismic site survey for scientific drilling

The presence of discontinuities(e.g.faults,fractures,veins,layering)in crystalline rocks can be challenging for seismic interpretations because the wide range of their size,orientation,and intensity,which controls the mechanical properties of the rock and elastic wave propagation,resulting in equally varying seismic responses at different scales.The geometrical characterisation of adjacent outcrop discontinuity networks allows a better understanding of the nature of the subsurface rocks and aids seismic interpretation.In this study,we characterise the discontinuity network of the Balmuccia peridotite(BP)in the IvreaeVerbano Zone(IVZ),northwestern Italy.This geological body is the focus of the Drilling the Ivrea eVerbano zonE(DIVE),an international continental scientific drilling project,and two active seismic surveys,SEismic imaging of the Ivrea ZonE(SEIZE)and high-resolution SEIZE(Hi-SEIZE),which aim to resolve the subsurface structure of the DIVE drilling target through high-resolution seismic imaging.For fracture characterisation,we developed two drone-based digital outcrop models(DOMs)at two different resolutions(10^(-3)-10 m and 10^(-1)-10^(3)m),which allowed us to quantitatively characterise the orientation,size,and intensity of the main rock discontinuities.These properties affect the seismic velocity and consequently the interpretation of the seismic data.We found that(i)the outcropping BP discontinuity network is represented by three more sets of fractures with respect to those reported in the literature;(ii)the discontinuity sizes follow a power-law distribution,indicating similarity across scales,and(iii)discontinuity intensity is not uniformly distributed along the outcrop.Our results help to explain the seismic behaviour of the BP detected by the SEIZE survey,suggesting that the low P-wave velocities observed can be related to the discontinuity network,and provide the basic topological parameters(orientation,density,distribution,and aperture)of the fracture network unique to the BP.These,in turn,can be used for interpretation of the Hi-SEIZE seismic survey and forward modelling of the seismic response.

Detailed seismic zoning of the East Kazakhstan region in the Republic of Kazakhstan

Kazakhstan is currently drafting new construction regulations that comply with the major provisions of the Eurocodes.Such regulations are created on the basis of seismic zoning maps of various degrees of detail,developed by our Institute of Seismology using a new methodological approach for Kazakhstan.The article is about creating the first normative map of the Detailed Seismic Zoning on a probabilistic foundation for the Republic of Kazakhstan’s East Kazakhstan region.We carried out the probabilistic assessment of seismic hazard using a methodology consistent with the main provisions of Eurocode 8and updated compared with that used in developing maps of Kazakhstan’s General Seismic Zoning and seismic microzoning of Almaty.The most thorough and current data accessible for the area under consideration were combined with contemporary analytical techniques.Updates have been done to not only the databases being used but also the way seismic sources were shown,including active faults now.On a scale of 1:1000000,precise seismic zoning maps of the East Kazakhstan region were created for two probabilities of exceedance:10%and 2%in 50 years in terms of peak ground accelerations and macroseismic intensities.The obtained seismic hazard distribution is generally consistent with the General Seismic Zoning of Kazakhstan’s previous findings.However,because active faults were included and a thoroughly revised catalog was used,there are more pronounced zones of increased danger along the fault in the western part of the region.In the west of the territory,acceleration values also increased due to a more accurate consideration of seismotectonic conditions.Zoning maps are the basis for developing new state building regulations of the Republic of Kazakhstan.

Advances in seismological methods for characterizing fault zone structure

Large earthquakes frequently occur along complex fault systems.Understanding seismic rupture and long-term fault evolution requires constraining the geometric and material properties of fault zone structures.We provide a comprehensive overview of recent advancements in seismological methods used to study fault zone structures,including seismic tomography,fault zone seismic wave analysis,and seismicity analysis.Observational conditions limit our current ability to fully characterize fault zones,for example,insufficient imaging resolution to discern small-scale anomalies,incomplete capture of crucial fault zone seismic waves,and limited precision in event location accuracy.Dense seismic arrays can overcome these limitations and enable more detailed investigations of fault zone structures.Moreover,we present new insights into the structure of the Anninghe-Xiaojiang fault zone in the southeastern margin of the Qinghai-Xizang Plateau based on data collected from a dense seismic array.We found that utilizing a dense seismic array can identify small-scale features within fault zones,aiding in the interpretation of fault zone geometry and material properties.

Seismic anisotropy and upper mantle dynamics in Alaska:A review of shear wave splitting analyses

Shear wave splitting(SWS)is regarded as the most effective geophysical method to delineate mantle flow fields by detecting seismic azimuthal anisotropy in the earth's upper mantle,especially in tectonically active regions such as subduction zones.The Aleutian-Alaska subduction zone has a convergence rate of approximately 50 mm/yr,with a trench length reaching nearly 2800 km.Such a long subduction zone has led to intensive continental deformation and numerous strong earthquakes in southern and central Alaska,while northern Alaska is relatively inactive.The sharp contrast makes Alaska a favorable locale to investigate the impact of subduction on mantle dynamics.Moreover,the uniqueness of this subduction zone,including the unusual subducting type,varying slab geometry,and atypical magmatic activity and composition,has intrigued the curiosity of many geoscientists.To identify different sources of seismic anisotropy beneath the Alaska region and probe the influence of a geometrically varying subducting slab on mantle dynamics,extensive SWS analyses have been conducted in the past decades.However,the insufficient station and azimuthal coverage,especially in early studies,not only led to some conflicting results but also strongly limited the in-depth investigation of layered anisotropy and the estimation of anisotropy depth.With the completion of the Transportable Array project in Alaska,recent studies have revealed more detailed mantle structures and characteristics based on the dense station coverage and newly collected massive seismic data.In this study,we review significant regional-and continental-scale SWS studies in the Alaska region and conclude the mantle flow fields therein,to understand how a geometrically varying subducting slab alters the regional mantle dynamics.The summarized mantle flow mechanisms are believed to be conducive to the understanding of seismic anisotropy patterns in other subduction zones with a complicated tectonic setting.

Preliminary report of coseismic surface rupture(part)of Türkiye's M_(W)7.8 earthquake by remote sensing interpretation

Both M_(W) 7.8 and M_(W) 7.5 earthquakes occurred in southeastern Türkiye on February 6,2023,resulting in numerous buildings collapsing and serious casualties.Understanding the distribution of coseismic surface ruptures and secondary disasters surrounding the epicentral area is important for post-earthquake emergency and disaster assessments.High-resolution Maxar and GF-2 satellite data were used after the events to extract the location of the rupture surrounding the first epicentral area.The results show that the length of the interpreted surface rupture zone(part of)is approximately 75 km,with a coseismic sinistral dislocation of 2-3 m near the epicenter;however,this reduced to zero at the tip of the southwest section of the East Anatolia Fault Zone.Moreover,dense soil liquefaction pits were triggered along the rupture trace.These events are in the western region of the Eurasian Seismic Belt and result from the subduction and collision of the Arabian and African Plates toward the Eurasian Plate.The western region of the Chinese mainland and its adjacent areas are in the eastern section of the Eurasian Seismic Belt,where seismic activity is controlled by the collision of the Indian and Eurasian Plates.Both China and Türkiye have independent tectonic histories.

Assessing current faulting behaviors and seismic risk of the Anninghe-Zemuhe fault zone from seismicity parameters

Using the data of regional seismic network, this paper analyzes the current faulting behaviors of different segments of the Anninghe-Zemuhe fault zone, western Sichuan, and identifies the likely risky segments for potential large earthquakes. The authors map the probable asperities from the abnormally low b-value distribution, develop and employ a method for identifying current faulting behaviors of individual fault segment from the combinations of multiple seismicity parameter values, and make an effort to estimate the average recurrence intervals of character-istic earthquakes by using the parameters of magnitude-frequency relationship of the asperity segment. The result suggests that the studied fault zone contains 5 segments of different current faulting behaviors. Among them, the Mianning-Xichang segment of the Anninghe fault has been locked under high stress, its central part is probably an asperity with a relatively large scale. The Xichang-Puge segment of the Zemuhe fault displays very low seismicity under low stress. Both the locked segment and the low-seismicity segment can be outlined on the across-profile of relocated hypocenter depths. The Mianning-Xichang segment is identified to be the one with potential large earth-quake risk, for which the average recurrence interval between the latest M = 6.7 earthquake in 1952 and the next characteristic event is estimated to be 55 to 67 years, and the magnitude of the potential earthquake between 7.0 and 7.5. Also, it has been preliminarily suggested that for a certain fault segment, its faulting behaviors may change and evolve with time gradually.

Assessing current faulting behaviors and seismic risk of the Anninghe-Zemuhe fault zone from seismicity parameters

Using the data of regional seismic network, this paper analyzes the current faulting behaviors of different segments of the Anninghe-Zemuhe fault zone, western Sichuan, and identifies the likely risky segments for potential large earthquakes. The authors map the probable asperities from the abnormally low b-value distribution, develop and employ a method for identifying current faulting behaviors of individual fault segment from the combinations of multiple seismicity parameter values, and make an effort to estimate the average recurrence intervals of character-istic earthquakes by using the parameters of magnitude-frequency relationship of the asperity segment. The result suggests that the studied fault zone contains 5 segments of different current faulting behaviors. Among them, the Mianning-Xichang segment of the Anninghe fault has been locked under high stress, its central part is probably an asperity with a relatively large scale. The Xichang-Puge segment of the Zemuhe fault displays very low seismicity under low stress. Both the locked segment and the low-seismicity segment can be outlined on the across-profile of relocated hypocenter depths. The Mianning-Xichang segment is identified to be the one with potential large earth-quake risk, for which the average recurrence interval between the latest M = 6.7 earthquake in 1952 and the next characteristic event is estimated to be 55 to 67 years, and the magnitude of the potential earthquake between 7.0 and 7.5. Also, it has been preliminarily suggested that for a certain fault segment, its faulting behaviors may change and evolve with time gradually.

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts： the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –（3±1） mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.

Crustal structure beneath the Qilian Orogen Zone from multiscale seismic tomography

The Qilian Orogen Zone(QOZ), located in the north margin of the Tibetan Plateau, is the key area for understanding the deformation and dynamics process of Tibet. Numerous geological and geophysical studies have been carried out on the mechanics of the Tibetan Plateau deformation and uplift; however, the detailed structure and deformation style of the Qilian Orogen Zone have remained uncertain due to poor geophysical data coverage and limited resolution power of inversion algorithms. In this study, we analyze the P-wave velocity structure beneath the Qilian Orogen Zone, obtained by applying multi-scale seismic tomography technique to P-wave arrival time data recorded by regional seismic networks. The seismic tomography algorithm used in this study employs sparsity constraints on the wavelet representation of the velocity model via L1-norm regularization. This algorithm can deal efficiently with uneven-sampled volumes, and can obtain multi-scale images of the velocity model. Our results can be summarized as follows:(1) The crustal velocity structure is strongly inhomogeneous and consistent with the surface geological setting. Significant low-velocity anomalies exist in the crust of northeastern Tibet, and slight high-velocity anomalies exist beneath the Qaidam Basin and Alxa terrane.(2)The Qilian Orogen Zone can be divided into two main parts by the Laji Shan Faults: the northwestern part with a low-velocity feature, and the southeastern part with a high-velocity feature at the upper and middle crust.(3) Our tomographic images suggest that northwestern and southeastern Qilian Orogen Zones have undergone different tectonic processes. In the northwest Qilian Orogen Zone, the deformation and growth of the Northern Tibetan Plateau has extended to the Heli Shan and Beida Shan region by northward overthrusting at the upper crust and thickening in the lower crust. We speculate that in the southeast Qilian Orogen Zone the deformation and growth of the Northern Tibet Plateau were of strike-slip style at the upper crust; in the lower crust, the evidence suggests ductile shear extrusion style and active frontage extension to the Alxa terrane.(4) The multi-scale seismic tomography technique provides multiscale analysis and sparse constraints, which has allowed to us obtain stable, high-resolution results.

Characteristics of Late-Quaternary Activity and Seismic Risk of the Northeastern Section of the Longmenshan Fault Zone

Following the 2008 Wenchuan M8 earthquake,the seismic risk of the northeastern section of the Longmenshan fault zone and the adjacent Hanzhong basin has become an issue that receives much concern.It is facing,however,the problem of a lack of sufficient data because of little previous work in these regions.The northeastern section of the Longmenshan fault zone includes three major faults：the Qingchuan fault,Chaba-Lin＇ansi fault,and Liangshan south margin fault,with the Hanzhong basin at the northern end.This paper presents investigations of the geometry,motion nature,and activity ages of these three faults,and reveals that they are strike slip with normal faulting,with latest activity in the Late Pleistocene.It implies that this section of the Longmenshan fault zone has been in an extensional setting,probably associated with the influence of the Hanzhong basin.Through analysis of the tectonic relationship between the Longmenshan fault zone and the Hanzhong basin,this work verifies that the Qingchuan fault played an important role in the evolution of the Hanzhong basin,and further studies the evolution model of this basin.Finally,with consideration of the tectonic setting of the Longmenshan fault zone and the Hanzhong basin as well as seismicity of surrounding areas,this work suggests that this region has no tectonic conditions for great earthquakes and only potential strong events in the future.

Active source monitoring at the Wenchuan fault zone:coseismic velocity change associated with aftershock event and its implication

With the improvement of seismic observation system, more and more observations indicate that earthquakes may cause seismic velocity change. However, the amplitude and spatial distribution of the velocity variation remains a controversial issue. Recent active source monitoring carried out adjacent to Wenchuan Fault Scientific Drilling （WFSD） revealed unambiguous coseismic velocity change associated with a local M8 5.5 earthquake. Here, we carry out forward modeling using two-dimensional spectral element method to further investigate the amplitude and spatial distribution of observed velocity change. The model is well constrained by results from seismic reflection and WFSD coring. Our model strongly suggests that the observed coseismic velocity change is localized within the fault zone with width of ~ 120 m rather than dynamic strong ground shaking. And a velocity decrease of -2.0 % within the fault zone is required to fit the observed travel time delay distribution, which coincides with rock mechanical experiment and theoretical modeling.

3-D shear wave velocity structure in the shallow crust of the Tan-Lu fault zone in Lujiang,Anhui,and adjacent areas,and its tectonic implications

The Tan-Lu fault zone is a large NNE-trending fault zone in eastern China.Investigations of the structures of the fault zone and its surrounding areas have attracted much attention.In this study,we used dense-array ambient noise tomography to construct a threedimensional shear wave velocity model of shallow crust in an area about 80km×70km in Lujiang,Anhui Province,eastern China.For approximately one month we collected continuous ambient noise signals recorded by 90 short-period seismographs in the region,and obtained the short-period Rayleigh wave empirical Green's functions between stations by the cross-correlation method;we also extracted 0.5–8 s fundamental mode Rayleigh wave group velocity and phase velocity dispersion curves.Based on the direct surface wave tomography method,we jointly inverted the group velocity and phase velocity dispersion data of all paths and obtained the 3-D shear wave velocity structure in the depth range of 0–5 km.The results revealed important geological structural features of the study area.In the north region,the sedimentary center of the Hefei Basin—the southwestern part of the Chaohu Lake—shows a significant low-velocity anomaly to a depth of at least 5 km.The southwestern and southeastern regions of the array are the eastern margin of the Dabie orogenic belt and the intrusion area of Luzong volcanic rocks,respectively,and both show obvious high-speed anomalies;the sedimentary area within the Tan-Lu fault zone(about 10 km wide)shows low-velocity anomalies.However,the volcanic rock intrusion area in the fault zone is shown as high velocity.Our shallow crustal imaging results reflect the characteristics of different structures in the study area,especially the high-speed intrusive rocks in the Tan-Lu fault zone,which were probably partially derived from the magmatic activity of Luzong volcanic basin.From the Late Cretaceous to Early Tertiary,the Tan-Lu fault zone was in a period of extensional activity;the special stress environment and the fractured fault zone morphology provided conditions for magma in the Luzong volcanic basin to intrude into the Tan-Lu fault zone in the west.Our 3-D model can also provide important information for deep resource exploration and earthquake strong ground motion simulation.

Correlation Studies of Rare Earth Elements in Syntectonic Intrusions of Strike-Slip Stage along Southern Segment of Tan-Lu Fault Zone

Intrusions in the Zhangbaling uplift zone and the eastern margin of the Dabie orogenic belt belong to the syntectonic intrusions developed during the strike-slip stage in the southern segment of the Tan-Lu fault zone. However, characteristics of rare earth elements show that intrusions in the Zhangbaling uplift zone have the characteristics of mantle source type and those in the eastern margin of Dabie belt are the typical crust source type. Therefore, Au-deposits related to the intrusions in the Zhangbaling uplift zone are developed better than those in the eastern margin of the Dabieshan. The research results of the rare earth elements coincide with the studies of geophysics, tectonic setting and stable isotope. It is further indicated that the rare earth elements offer effective approach to tracing the material sources of magmatic rocks.

Geochronology and Petrogenesis of Granitoid Intrusions in the Feidong District, Southern Tan-Lu Fault Zone, China

The Feidong district is located in the southern segment of the Tan-Lu fault zone that separates the South China Block(NCB)from the North China Craton(NCC).We report zircon U-Pb geochronology and Hf isotope data,as well as whole-rock geochemistry for Xishanyi granodiorite and Jianshan granite in the Feidong district.Zircon U-Pb dating results show that the emplacement ages of the Xishanyi and Jianshan intrusions are 124±3 Ma and 130±1 Ma respectively,coeval with magmatic events linked to large-scale lithospheric thinning in eastern China.The whole-rock geochemistry of the Xishanyi and Jianshan intrusions demonstrate that they are peraluminous,high potassium calc-alkaline I-type granites with adakitic characteristics.Both intrusions underwent weak crustal assimilation during emplacement.The in situ zirconε(Hf)(t)values of the Xishanyi granodiorites range from-26.4 to-21.8,with T(DM2)model ages of 2552 to 2841 Ma.The in situ zirconε(Hf)(t)values of the Jianshan granite are from-27.5 to-23.0 with T(DM2)model ages of 2632 to 2904 Ma.The peak age of inherited zircon grains from the Xishanyi granodiorite and the Jianshan granite were^2.07 Ga and^1.94 Ga,respectively.After compared with the regional magmatism,we suggest that both the Xishanyi and Jianshan granitoid intrusions were derived from partial melting of the NCC lower crust.

Correlation between plate age and layer separation of double seismic zones

Global seismicity catalogs are sufficient for characterizing double seismic zones （DSZs） in subducting slab and facilitate to estimate layer separation without inconsistent uncertainties as local catalogs. Previous studies have shown the correlation between DSZs layer separation and plate age while correlation for those younger than -60 Ma is suspicious. The lacking of DSZs with layer separation less than 10 km further makes it difficult to precisely estimate such correlation. Thus, we incorporate eight DSZs data determined through local seismicity into globally-determined dataset and reexamine such correlation. The best fitting results show that both a linear model and a square root of plate age can mathematically fit the layer separation well. However, it is difficult to distinguish these two models when plate age is greater than -20 Ma since their difference is less than 2 km. However, if extrapolation is possible, both models should provide physical information that DSZs will not form if there is no subducting lithosphere. As a result, the DSZs cannot be produced until the oceanic lithospheric age becomes greater than 0.9 Ma in the square root model while the linear model gives a misleading result. As such the square root model demonstrates the relationship physically better than the linear one, it still needs further test in the future with more available data, nevertheless, our study might also provide evidence for the suggestion that the plate age is a primary control factor of the DSZs geometry as well as the subducting process which disregards any local tectonic stresses.

Excess and Radiogenic Argon in High-Pressure Mylonites of the Tan-Lu Fault Zone, Eastern China

Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the TanLu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.

Crust-mantle structure feature and the seismic activity of the main tectonic units in the North Tanlu fault zone

Using recent data of geoscience transaction in Northeast China, the author analyses and studies the crust-upper mantle structure feature of the North Tanlu fault zone. The result shows the crust-mantle structure are obvious difference at both sides of the North Tanlu fault zone. The fault activity and segmentation are closely related with abruptly change zone of the crust-upper mantle structure. There is a clear mirror image relationship between the big geomorphic shape and asthenosphere undulate, the former restricts tectonic stability and tectonic style of dif- ferent crustal units. The significantly strengthening seismicity of north set and south set in the North Tanlu fault zone just correspond to the low-velocity and high conductivity layer of crust-upper mantle. In the North Tanlu fault zone, the main controlling structure of the mid-strong seismic generally consists of the active fault sectors, whose crust-mantle structure is more complicated in rigidity massif.

RELATIONSHIP BETWEEN P-T CONTITIONS OF TWO PHASES OF TAN-LU STRIKE-SLIP SHEAR ZONES AND DELAMINATION OF OROGENIC BELTS ON THE EASTERN MARGIN OF THE DABIE MOUNTAINS

The Tan-Lu fault zone joins the Dabie Mountains on its eastern margin, and offsets the Dabie and Sulu orogenic belts sinistrally for about 500 kin. On the basis of calculation of temperature and pressure experienced by the two phases of the fault zone as well as the thermo-chronological information on mylonite from the earlier and later Tan-Lu fault zones on the eastern margin of the Dabie Mountains, this paper discusses the delamination history and uplifting magnitudes of the Dabie Mountains from earlier Jurassic to earlier Cretaceous. From mineral assemblages, mineral deformation and muscovite-chlorite geothermometry calculation, it is known that the temperature experienced by the two phases of Tan-Lu fault zones are between 40℃ and 450℃, and the confining pressures are between 0.25Gpa and 0.36GPa for the earlier shear zones and 0.24-0.39GPa for the late shear zones. According to the geobarometry of Si-in-phengite and by considering shear heating and tectonic over-pressure, it is concluded that the maximum formation depths for the two phases of the ductile shear zones are not more than 12 kin. Differential formation depths for the two phases of shear zones are 1-2 km at most. At about 190 Ma and 128 Ma, the Tan-Lu fault zone experienced two phases of cooling events. During this period, the eastem margin of the Dabie Mountains experienced a tectonic calm period and no uplifting. According to information from the Tan-Lu fault zone, the uplifting magnitudes of the Dabie orogenic belts are not more than 12 km during the earlier Cretaceous.