Solid oxide fuel cell is attracting more attention in recent years for its lower pollution emission and high energy convert efficiency. La0.9Sr0.1Ga0.8Mg0.2O3-δis a new kind of electrolyte for intermediate temperatur...Solid oxide fuel cell is attracting more attention in recent years for its lower pollution emission and high energy convert efficiency. La0.9Sr0.1Ga0.8Mg0.2O3-δis a new kind of electrolyte for intermediate temperature SOFC. In this paper, La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM) was prepared by solid state reaction method and formed by tape casting process to make a planar electrolyte. The appropriate amount of the dispersive was obtained by viscosity test. The densities of sintered samples increase with the increasing sintering temperature. It was found that the relative density of electrolyte can approach the value of 95 % by the isostatic pressing treatment of the green tape. The average thermal expansion coefficient of the LSGM is 11 .4×10-6 /℃at temperature range (200 ~ 1200℃). Measurements of the current-voltage and power-current characteristics of the Hi-Air cell show that the open-circuit voltage is 1.067 V at 800℃, peak current density is 0.56 A·cm -2 and the maximum power output is 0.147 W·cm -2.展开更多
A cone-shaped gadolinium doped ceria（Ce0.9Gd0.1O1.95,GDC） electrolyte cylinder with a thin wall was fabricated using slip cast-ing technique.The diameter of the larger open end of the cone-shaped cylinder was 0.85 c...A cone-shaped gadolinium doped ceria（Ce0.9Gd0.1O1.95,GDC） electrolyte cylinder with a thin wall was fabricated using slip cast-ing technique.The diameter of the larger open end of the cone-shaped cylinder was 0.85 cm,the length was 1.0 cm,and the thickness of the wall was 0.026 cm after sintering.Both the electrolyte and electrode powders were fabricated by using a glycine-nitrate process.A single solid oxide fuel cell（SOFC） was prepared with the cone-shaped electrolyte,NiO-GDC（70：30 wt.%） anode and Sm0.5Sr0.5CoO3（SSC） cathode.Its electrochemical performance（I-V curve） and electrochemical impedance spectroscopy（EIS） were studied with humidified hydrogen as the fuel and air as the oxidant.The maximum output power density was about 300 ？mW/cm2 at 700 oC.The EIS results showed that the dominant loss of the SOFC was from the ohmic resistance of the electrolyte.展开更多
基金Project supported by the National Natural Science Foundation of China (90510006)
文摘Solid oxide fuel cell is attracting more attention in recent years for its lower pollution emission and high energy convert efficiency. La0.9Sr0.1Ga0.8Mg0.2O3-δis a new kind of electrolyte for intermediate temperature SOFC. In this paper, La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM) was prepared by solid state reaction method and formed by tape casting process to make a planar electrolyte. The appropriate amount of the dispersive was obtained by viscosity test. The densities of sintered samples increase with the increasing sintering temperature. It was found that the relative density of electrolyte can approach the value of 95 % by the isostatic pressing treatment of the green tape. The average thermal expansion coefficient of the LSGM is 11 .4×10-6 /℃at temperature range (200 ~ 1200℃). Measurements of the current-voltage and power-current characteristics of the Hi-Air cell show that the open-circuit voltage is 1.067 V at 800℃, peak current density is 0.56 A·cm -2 and the maximum power output is 0.147 W·cm -2.
基金Project supported by the National "863" Program of China (2007AA05Z136)the National Natural Science Foundation of China (51172113)+1 种基金the Taishan Scholar Overseas Distinguished Professorship Program from the Shandong Province Government,the Shandong Natural Science Foundation for Distinguished Young Scholars (JQ201118)the Research Foundation for Talented Scholars of Qingdao University of Science and Technology (400-0022374)
文摘A cone-shaped gadolinium doped ceria（Ce0.9Gd0.1O1.95,GDC） electrolyte cylinder with a thin wall was fabricated using slip cast-ing technique.The diameter of the larger open end of the cone-shaped cylinder was 0.85 cm,the length was 1.0 cm,and the thickness of the wall was 0.026 cm after sintering.Both the electrolyte and electrode powders were fabricated by using a glycine-nitrate process.A single solid oxide fuel cell（SOFC） was prepared with the cone-shaped electrolyte,NiO-GDC（70：30 wt.%） anode and Sm0.5Sr0.5CoO3（SSC） cathode.Its electrochemical performance（I-V curve） and electrochemical impedance spectroscopy（EIS） were studied with humidified hydrogen as the fuel and air as the oxidant.The maximum output power density was about 300 ？mW/cm2 at 700 oC.The EIS results showed that the dominant loss of the SOFC was from the ohmic resistance of the electrolyte.
