Accurate prediction of stem diameter is an important prerequisite of forest management.In this study,an appropriate stem taper function was developed for upper stem diameter estimation of white birch(Betula platyphyll...Accurate prediction of stem diameter is an important prerequisite of forest management.In this study,an appropriate stem taper function was developed for upper stem diameter estimation of white birch(Betula platyphylla Sukaczev)in ten sub-regions of the Daxing’an Mountains,northeast China.Three commonly used taper functions were assessed using a diameter and height dataset comprising 1344 trees.A first-order continuous-time error structure accounted for the inherent autocorrelation.The segmented model of Max and Burkhart(For Sci 22:283–289,1976.https://doi.org/10.1093/fores tscie nce/22.3.283)and the variable exponent taper function of Kozak(For Chron 80:507–515,2004.https://doi.org/10.5558/tfc80507-4)described the data accurately.Owing to its lower multicollinearity,the Max and Burkhart(1976)model is recommended for diameter estimation at specific heights along the stem for the ten sub-regions.After comparison,the Max and Burkhart(1976)model was refitted using nonlinear mixed-effects techniques.Mixed-effects models would be used only when additional upper stem diameter measurements are available for calibration.Differences in region-specific taper functions were indicated by the method of the non-linear extra sum of squares.Therefore,the particular taper function should be adjusted accordingly for each sub-region in the Daxing’an Mountains.展开更多
In this paper the semi-analytical analyses of the flexible cantilever tapered functionally graded beam under combined inclined end loading and intermediate loading are studied.In order to derive the fully non-linear e...In this paper the semi-analytical analyses of the flexible cantilever tapered functionally graded beam under combined inclined end loading and intermediate loading are studied.In order to derive the fully non-linear equations governing the non-linear deformation,a curvilinear coordinate system is introduced.A general non-linear second order differential equation that governs the shape of a deflected beam is derived based on the geometric nonlinearities,infinitesimal local displacements and local rotation concepts with remarkable physical properties of functionally graded materials.The solutions obtained from semi-analytical methods are numerically compared with the existing elliptic integral solution for the case of a flexible uniform cantilever functionally graded beam.The effects of taper ratio,inclined end load angle and material property gradient on large deflection of the beam are evaluated.The Adomian decomposition method will be useful toward the design of tapered functionally graded compliant mechanisms driven by smart actuators.展开更多
The hybrid-mode dispersion equation of the metal-grating periodic slow-wave structure for a rectangular Cerenkov maser is derived by using the Borgnis function and field-matching methods.An equivalent-circuit model fo...The hybrid-mode dispersion equation of the metal-grating periodic slow-wave structure for a rectangular Cerenkov maser is derived by using the Borgnis function and field-matching methods.An equivalent-circuit model for the taper of the groove depth that matches the smooth waveguide to the metal-grating structure is proposed.By using the equivalentcircuit method,as well as the Ansoft high frequency structure simulator（HFSS） code,an appropriate electromagnetic mode for beam-wave interaction is selected and the equivalent-circuit analysis on the taper is given.The calculated results show that a cumulative reflection coefficient of 0.025 for the beam-wave interaction structure at a working frequency of 78.1 GHz can be reached by designing the exponential taper with a TE z10 rectangular waveguide mode as the input and the desired TE x10 mode as the output.It is worth pointing out that by using the equivalent-circuit method,the complex field-matching problems from the traditional field-theory method for taper design can be avoided,so the taper analysis process is markedly simplified.展开更多
Fourier modal method incorporating staircase approximation is used to study tapered crossed subwavelength gratings in this paper. Three intuitive formulations of eigenvalue functions originating from the prototype are...Fourier modal method incorporating staircase approximation is used to study tapered crossed subwavelength gratings in this paper. Three intuitive formulations of eigenvalue functions originating from the prototype are presented, and their convergences are compared through numerical calculation. One of them is found to be suitable in modeling the diffraction efficiency of the circular tapered crossed subwavelength gratings without high absorption, and staircase approximation is further proven valid for non-highly-absorptive tapered gratings. This approach is used to simulate the ＂moth-eye＂ antireflection surface on silicon, and the numerical result agrees well with the experimental one.展开更多
The travel time and amplitude of ground-penetrating radar （GPR） waves are closely related to medium parameters such as water content, porosity, and dielectric permittivity. However, conventional estimation methods, ...The travel time and amplitude of ground-penetrating radar （GPR） waves are closely related to medium parameters such as water content, porosity, and dielectric permittivity. However, conventional estimation methods, which are mostly based on wave velocity, are not suitable for real complex media because of limited resolution. Impedance inversion uses the reflection coefficient of radar waves to directly calculate GPR impedance and other parameters of subsurface media. We construct a 3D multiscale stochastic medium model and use the mixed Gaussian and exponential autocorrelation function to describe the distribution of parameters in real subsurface media. We introduce an elliptical Gaussian function to describe local random anomalies. The tapering function is also introduced to reduce calculation errors caused by the numerical simulation of discrete grids. We derive the impedance inversion workflow and test the calculation precision in complex media. Finally, we use impedance inversion to process GPR field data in a polluted site in Mongolia. The inversion results were constrained using borehole data and validated by resistivity data.展开更多
Estimating individual tree volume is one of the essential building blocks in forest growth and yield models. Ecologically based taper equations provide accurate vol- ume predictions and allow classification by mer- ch...Estimating individual tree volume is one of the essential building blocks in forest growth and yield models. Ecologically based taper equations provide accurate vol- ume predictions and allow classification by mer- chantable sizes, assisting in sustainable forest management. In the present study, ecoregion-based compatible volume systems for brutian pine and black pine in the three ecoregions of southern Turkey were developed. Several well-known taper functions were evaluated. A second- order continuous-time autoregressive error structure was used to correct the inherent autocorrelation in the hierar- chical data, allowing the model to be applied to irregularly spaced and unbalanced data. The compatible segmented model of Fang et al. （For Sci 46：1-12, 2000） best described the experimental data. It is therefore recommended for estimating diameter at a specific height, height to a specific diameter, merchantable volume, and total volume for the three ecoregions and two species analyzed. The nonlinearextra sum of squares method indicated differences in ecoregion and tree-specific taper functions. A different taper function should therefore be used for each pine spe- cies and ecoregion in southern Turkey. Using ecoregion- specific taper equations allows making more robust esti- mations and, therefore, will enhance the accuracy of diameter at different heights and volume predictions.展开更多
The taper functions of Kozak （1988）, Bi （2000） and Fang et al. （2000） were comparatively analyzed in the present paper to develop a system for calculating the merchantable volume of oaks in the northwestern regi...The taper functions of Kozak （1988）, Bi （2000） and Fang et al. （2000） were comparatively analyzed in the present paper to develop a system for calculating the merchantable volume of oaks in the northwestern region of the state of Chihuahua （Mexico）. Taper data corresponding to 298 trees were collected in mixed and uneven-aged pine-oak stands located throughout the study area, and covering the cxisting range of ages, stand densities and sites. Results show that the compatible segmented model developed by Fang et al. （2000） best described the experimental data and is therefore recommended for estimating tree diameter at a specific height, height to a specific diameter, merchantable volume, and total volume for oaks. The equation developed in this study is a fundamental tool for use in forest surveys in the study region and is simple enough to ensure its operational implementation. The results of the statistical analysis show that the equation can be recommended for other regions, although some local adaptations may be needed.展开更多
基金fi nancially supported by the National Natural Science Foundation of China(31570624)Applied Technology Research and Development Plan Project of Heilongjiang Province(GA19C006)Fundamental Research Funds for Central Universities(2572019CP15).
文摘Accurate prediction of stem diameter is an important prerequisite of forest management.In this study,an appropriate stem taper function was developed for upper stem diameter estimation of white birch(Betula platyphylla Sukaczev)in ten sub-regions of the Daxing’an Mountains,northeast China.Three commonly used taper functions were assessed using a diameter and height dataset comprising 1344 trees.A first-order continuous-time error structure accounted for the inherent autocorrelation.The segmented model of Max and Burkhart(For Sci 22:283–289,1976.https://doi.org/10.1093/fores tscie nce/22.3.283)and the variable exponent taper function of Kozak(For Chron 80:507–515,2004.https://doi.org/10.5558/tfc80507-4)described the data accurately.Owing to its lower multicollinearity,the Max and Burkhart(1976)model is recommended for diameter estimation at specific heights along the stem for the ten sub-regions.After comparison,the Max and Burkhart(1976)model was refitted using nonlinear mixed-effects techniques.Mixed-effects models would be used only when additional upper stem diameter measurements are available for calibration.Differences in region-specific taper functions were indicated by the method of the non-linear extra sum of squares.Therefore,the particular taper function should be adjusted accordingly for each sub-region in the Daxing’an Mountains.
文摘In this paper the semi-analytical analyses of the flexible cantilever tapered functionally graded beam under combined inclined end loading and intermediate loading are studied.In order to derive the fully non-linear equations governing the non-linear deformation,a curvilinear coordinate system is introduced.A general non-linear second order differential equation that governs the shape of a deflected beam is derived based on the geometric nonlinearities,infinitesimal local displacements and local rotation concepts with remarkable physical properties of functionally graded materials.The solutions obtained from semi-analytical methods are numerically compared with the existing elliptic integral solution for the case of a flexible uniform cantilever functionally graded beam.The effects of taper ratio,inclined end load angle and material property gradient on large deflection of the beam are evaluated.The Adomian decomposition method will be useful toward the design of tapered functionally graded compliant mechanisms driven by smart actuators.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60801031)
文摘The hybrid-mode dispersion equation of the metal-grating periodic slow-wave structure for a rectangular Cerenkov maser is derived by using the Borgnis function and field-matching methods.An equivalent-circuit model for the taper of the groove depth that matches the smooth waveguide to the metal-grating structure is proposed.By using the equivalentcircuit method,as well as the Ansoft high frequency structure simulator（HFSS） code,an appropriate electromagnetic mode for beam-wave interaction is selected and the equivalent-circuit analysis on the taper is given.The calculated results show that a cumulative reflection coefficient of 0.025 for the beam-wave interaction structure at a working frequency of 78.1 GHz can be reached by designing the exponential taper with a TE z10 rectangular waveguide mode as the input and the desired TE x10 mode as the output.It is worth pointing out that by using the equivalent-circuit method,the complex field-matching problems from the traditional field-theory method for taper design can be avoided,so the taper analysis process is markedly simplified.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60636030)
文摘Fourier modal method incorporating staircase approximation is used to study tapered crossed subwavelength gratings in this paper. Three intuitive formulations of eigenvalue functions originating from the prototype are presented, and their convergences are compared through numerical calculation. One of them is found to be suitable in modeling the diffraction efficiency of the circular tapered crossed subwavelength gratings without high absorption, and staircase approximation is further proven valid for non-highly-absorptive tapered gratings. This approach is used to simulate the ＂moth-eye＂ antireflection surface on silicon, and the numerical result agrees well with the experimental one.
基金supported by the Doctoral Fund Project of the Ministry of Education(No.20130061110060 class tutors)the Post-Doctoral Fund Project(No.2015M571366)+1 种基金the National Natural Science Foundation of China(No.41174097)US DoD ARO Project"Advanced Mathematical Algorithm"(No.W911NF-11-2-0046)
文摘The travel time and amplitude of ground-penetrating radar （GPR） waves are closely related to medium parameters such as water content, porosity, and dielectric permittivity. However, conventional estimation methods, which are mostly based on wave velocity, are not suitable for real complex media because of limited resolution. Impedance inversion uses the reflection coefficient of radar waves to directly calculate GPR impedance and other parameters of subsurface media. We construct a 3D multiscale stochastic medium model and use the mixed Gaussian and exponential autocorrelation function to describe the distribution of parameters in real subsurface media. We introduce an elliptical Gaussian function to describe local random anomalies. The tapering function is also introduced to reduce calculation errors caused by the numerical simulation of discrete grids. We derive the impedance inversion workflow and test the calculation precision in complex media. Finally, we use impedance inversion to process GPR field data in a polluted site in Mongolia. The inversion results were constrained using borehole data and validated by resistivity data.
基金financially supported by the Scientific and Technological Research Council of Turkey(Project No:109 O 714)
文摘Estimating individual tree volume is one of the essential building blocks in forest growth and yield models. Ecologically based taper equations provide accurate vol- ume predictions and allow classification by mer- chantable sizes, assisting in sustainable forest management. In the present study, ecoregion-based compatible volume systems for brutian pine and black pine in the three ecoregions of southern Turkey were developed. Several well-known taper functions were evaluated. A second- order continuous-time autoregressive error structure was used to correct the inherent autocorrelation in the hierar- chical data, allowing the model to be applied to irregularly spaced and unbalanced data. The compatible segmented model of Fang et al. （For Sci 46：1-12, 2000） best described the experimental data. It is therefore recommended for estimating diameter at a specific height, height to a specific diameter, merchantable volume, and total volume for the three ecoregions and two species analyzed. The nonlinearextra sum of squares method indicated differences in ecoregion and tree-specific taper functions. A different taper function should therefore be used for each pine spe- cies and ecoregion in southern Turkey. Using ecoregion- specific taper equations allows making more robust esti- mations and, therefore, will enhance the accuracy of diameter at different heights and volume predictions.
基金supported by El Fondo de Cooperación Internacional en Cienciay Tecnología entre la UE-México (project: 92739)
文摘The taper functions of Kozak （1988）, Bi （2000） and Fang et al. （2000） were comparatively analyzed in the present paper to develop a system for calculating the merchantable volume of oaks in the northwestern region of the state of Chihuahua （Mexico）. Taper data corresponding to 298 trees were collected in mixed and uneven-aged pine-oak stands located throughout the study area, and covering the cxisting range of ages, stand densities and sites. Results show that the compatible segmented model developed by Fang et al. （2000） best described the experimental data and is therefore recommended for estimating tree diameter at a specific height, height to a specific diameter, merchantable volume, and total volume for oaks. The equation developed in this study is a fundamental tool for use in forest surveys in the study region and is simple enough to ensure its operational implementation. The results of the statistical analysis show that the equation can be recommended for other regions, although some local adaptations may be needed.
