By using a ray method, a physical model that the backscattering of a tube is simplilied into reflection of a plane wave on layered media is suggested and reconstruction formulas of the parameters of a metallic tube co...By using a ray method, a physical model that the backscattering of a tube is simplilied into reflection of a plane wave on layered media is suggested and reconstruction formulas of the parameters of a metallic tube covered with sound-absorbing materials under the conditions of high frequency, fard field and thin tube are given. The internal and external radii of an aluminium tube filled by water or air and thickness of the covered material are reconstructed by using computer simulation and experimellts. The theoretical tesults obtained by this method are supported by experiments.展开更多
In a non-free field,the existence of disturbing sources would destroy the free-field condition required by near-field acoustic holography,and confuse the identification of target source due to the scattering effect ca...In a non-free field,the existence of disturbing sources would destroy the free-field condition required by near-field acoustic holography,and confuse the identification of target source due to the scattering effect caused by disturbing sound falling on the target source.To totally remove the influence of disturbing source,a method for recovering and reconstructing the target sound field in a non-free field was proposed based on the equivalent source method and the pressure-velocity measurement.In the proposed method,the sound field separation technique was firstly used to separate the mixed sound field into the outgoing field coming from the target source and the incoming field coming from the disturbing source.Then the scattered component contained in the outgoing field was calculated by using the disturbing sound and the surface impedance of the target source.Finally,the sound field radiated by the target source in a free field was obtained by subtracting the scattered component from the outgoing field and was further used to reconstruct the sound field of the target source.The proposed method was numerically and experimentally testified and the results of both the simulation and the experiment demonstrated the validity of the proposed method.展开更多
文摘By using a ray method, a physical model that the backscattering of a tube is simplilied into reflection of a plane wave on layered media is suggested and reconstruction formulas of the parameters of a metallic tube covered with sound-absorbing materials under the conditions of high frequency, fard field and thin tube are given. The internal and external radii of an aluminium tube filled by water or air and thickness of the covered material are reconstructed by using computer simulation and experimellts. The theoretical tesults obtained by this method are supported by experiments.
基金supported by the National Natural Science Foundation of China(51605274)the Young College Teachers Program of Shanghai Education Committee(ZZGCD15115)+1 种基金the Innovation Program of Shanghai Municipal Education Commission(14YZ137)the Postdoctoral Research Project of Jiangxi Province(2014ky20)
文摘In a non-free field,the existence of disturbing sources would destroy the free-field condition required by near-field acoustic holography,and confuse the identification of target source due to the scattering effect caused by disturbing sound falling on the target source.To totally remove the influence of disturbing source,a method for recovering and reconstructing the target sound field in a non-free field was proposed based on the equivalent source method and the pressure-velocity measurement.In the proposed method,the sound field separation technique was firstly used to separate the mixed sound field into the outgoing field coming from the target source and the incoming field coming from the disturbing source.Then the scattered component contained in the outgoing field was calculated by using the disturbing sound and the surface impedance of the target source.Finally,the sound field radiated by the target source in a free field was obtained by subtracting the scattered component from the outgoing field and was further used to reconstruct the sound field of the target source.The proposed method was numerically and experimentally testified and the results of both the simulation and the experiment demonstrated the validity of the proposed method.
