Reliability-Based Load and Resistance Factors Design for Offshore Jacket Platforms in the Bohai Bay:Calibration on Target Reliability Index

The target reliability index has been effectively used as the best solution to deal with the relationship between the structural safety and the optimal economy in any structural design. However, the target reliability index for offshore jacket platforms based on different sea areas in China has never been calibrated. This paper presents an approach for its calibration, and suggests many kinds of associated load cases. The uncertainties of loads and structural resistance are mainly in- vestigated. The target reliability index for structural components, tubular joints and piles of offshore jacket plaffortns are discussed respectively in detail. Finally, through the calibrated results from the offshore jacket platforms of QK18-1, JZ20-2, SZ36-1 and BZ28-1 in the Bohai Bay, it is proposed to adopt 2.8 as the target reliability index of offshore jacket platforms in the Bohai Bay for a 25-year design period. The results provide significant reference for the design of offshore jacket platforms.

Target reliability index for serviceability limit state of single piles

The objective is to develop an approach for the determination of the target reliability index for serviceability limit state(SLS) of single piles. This contributes to conducting the SLS reliability-based design(RBD) of piles. Based on a two-parameter,hyperbolic curve-fitting equation describing the load-settlement relation of piles, the SLS model factor is defined. Then, taking into account the uncertainties of load-settlement model, load and bearing capacity of piles, the formula for computing the SLS reliability index(βsls) is obtained using the mean value first order second moment(MVFOSM) method. Meanwhile, the limit state function for conducting the SLS reliability analysis by the Monte Carlo simulation(MCS) method is established. These two methods are finally applied to determine the SLS target reliability index. Herein, the limiting tolerable settlement(slt) is treated as a random variable. For illustration, four load test databases from South Africa are compiled again to conduct reliability analysis and present the recommended target reliability indices. The results indicate that the MVFOSM method overestimates βsls compared to that computed by the MCS method. Besides, both factor of safety(FS) and slt are key factors influencing βsls, so the combination of FS and βsls is welcome to be used for the SLS reliability analysis of piles when slt is determined. For smaller slt, pile types and soils conditions have significant influence on the SLS target reliability indices; for larger slt, slt is the major factor having influence on the SLS target reliability indices. This proves that slt is the most key parameter for the determination of the SLS target reliability index.