The melt-spun SmFe_(12)B_x(x = 0, 0.50, 0.75,1.00, 1.25 and 1.50) ribbons were prepared at 40 m·s^(-1),and their structure and magnetic properties were studied by powder X-ray diffraction(XRD), vibrating sample m...The melt-spun SmFe_(12)B_x(x = 0, 0.50, 0.75,1.00, 1.25 and 1.50) ribbons were prepared at 40 m·s^(-1),and their structure and magnetic properties were studied by powder X-ray diffraction(XRD), vibrating sample magnetometer(VSM) and transmission electron microscopy(TEM). XRD results indicate that SmFe_(12)B_x alloys with 0.50 ≤ x ≤ 1.00 are composed of single-phase TbCu_7-type structure. Moreover, it is found that the boron addition can inhibit the emergence of soft magnetic phase a-Fe and result in the increase in the axial ratio c/a. After annealing at 650 ℃ for 0.5 h, the metastable phase TbCu_7 initially decomposes into the stable phase Sm_2Fe_(14)B(Nd_2Fe_(14)B-type) and a-Fe. The value of magnetic moment per Fe atom increases slightly from 1.75 uB for boron-free sample to 1.80 uB for the x = 0.75 sample and then decreases again.In addition, the best magnetic properties of maximum energy product [(BH)_(max)] of 14.56 kJ·m^(-3), coercivity(H_(cj))of 172.6 kA·m^(-1) and remanence(B_r) of 0.45 T are obtained for the SmFe_(12)B_(1.00) alloy. Based on transmission electron microscopy(TEM) results, the average size of grains is around 197 nm for B-free sample and decreases to 95 nm for x = 1.00 sample, indicating that the addition of boron can refine grains.展开更多
Bulk nanocrystalline SmCo6Fe sintered magnet was prepared by Spark Plasma Sintering technique (SPS). XRD patterns show that the magnet exhibits a stable TbCu7 structure. TEM observation indicates that the microstructu...Bulk nanocrystalline SmCo6Fe sintered magnet was prepared by Spark Plasma Sintering technique (SPS). XRD patterns show that the magnet exhibits a stable TbCu7 structure. TEM observation indicates that the microstructure of the magnet is composed of SmCo6Fe single phase grains with an average grain size of 30 nm. Magnetic measurement shows that under 9 T magnetic field, the coercivity of the magnet reaches 1.12 T; the saturation magnetization and the remanence are 1.13 and 0.67 T, respectively. The magnet has a (BH)max of 75.6 kJ·cm-3.展开更多
In this study,molten salt was used as a solvent for calcium(Ca)to let a reduction-diffusion(R-D)reaction occur below the melting point of Ca(1115 K),which is the lower limit temperature of the co nventional RD process...In this study,molten salt was used as a solvent for calcium(Ca)to let a reduction-diffusion(R-D)reaction occur below the melting point of Ca(1115 K),which is the lower limit temperature of the co nventional RD process.When the R-D reaction is conducted below 923 K with LiCl molten salt,submicron-sized TbCu_(7)-type Sm-Fe powder is formed.The c/a ratio of the powder estimated by a synchrotron X-ray diffraction pattern is 0.8456,which is consistent with the Sm_(0.67)Fe_(5.667)(SmFe_(8.5))phase.An electron backscatter diffraction analysis reveals that single-crystalline TbCu_(7)-type SmFe_(8.5) powder was synthesized for the first time.展开更多
基金financially supported by the National Natural Science Foundation of China (No. 51401028)
文摘The melt-spun SmFe_(12)B_x(x = 0, 0.50, 0.75,1.00, 1.25 and 1.50) ribbons were prepared at 40 m·s^(-1),and their structure and magnetic properties were studied by powder X-ray diffraction(XRD), vibrating sample magnetometer(VSM) and transmission electron microscopy(TEM). XRD results indicate that SmFe_(12)B_x alloys with 0.50 ≤ x ≤ 1.00 are composed of single-phase TbCu_7-type structure. Moreover, it is found that the boron addition can inhibit the emergence of soft magnetic phase a-Fe and result in the increase in the axial ratio c/a. After annealing at 650 ℃ for 0.5 h, the metastable phase TbCu_7 initially decomposes into the stable phase Sm_2Fe_(14)B(Nd_2Fe_(14)B-type) and a-Fe. The value of magnetic moment per Fe atom increases slightly from 1.75 uB for boron-free sample to 1.80 uB for the x = 0.75 sample and then decreases again.In addition, the best magnetic properties of maximum energy product [(BH)_(max)] of 14.56 kJ·m^(-3), coercivity(H_(cj))of 172.6 kA·m^(-1) and remanence(B_r) of 0.45 T are obtained for the SmFe_(12)B_(1.00) alloy. Based on transmission electron microscopy(TEM) results, the average size of grains is around 197 nm for B-free sample and decreases to 95 nm for x = 1.00 sample, indicating that the addition of boron can refine grains.
基金the National Natural Science Funding (50201001)Beijing Natural Science Foundation (2041001)National High Technology Research and Development Program of China (2007AA03Z458)
文摘Bulk nanocrystalline SmCo6Fe sintered magnet was prepared by Spark Plasma Sintering technique (SPS). XRD patterns show that the magnet exhibits a stable TbCu7 structure. TEM observation indicates that the microstructure of the magnet is composed of SmCo6Fe single phase grains with an average grain size of 30 nm. Magnetic measurement shows that under 9 T magnetic field, the coercivity of the magnet reaches 1.12 T; the saturation magnetization and the remanence are 1.13 and 0.67 T, respectively. The magnet has a (BH)max of 75.6 kJ·cm-3.
基金Project supported by JSPS KAKENHI(16K18230,18K13986,20K05072)。
文摘In this study,molten salt was used as a solvent for calcium(Ca)to let a reduction-diffusion(R-D)reaction occur below the melting point of Ca(1115 K),which is the lower limit temperature of the co nventional RD process.When the R-D reaction is conducted below 923 K with LiCl molten salt,submicron-sized TbCu_(7)-type Sm-Fe powder is formed.The c/a ratio of the powder estimated by a synchrotron X-ray diffraction pattern is 0.8456,which is consistent with the Sm_(0.67)Fe_(5.667)(SmFe_(8.5))phase.An electron backscatter diffraction analysis reveals that single-crystalline TbCu_(7)-type SmFe_(8.5) powder was synthesized for the first time.