Tb0.29（Dy1–xPrx）0.71Fe1.97 （x=0, 0.1, 0.2 and 0.3） alloys prepared by the directional solidification method were treated at 1073, 1123, 1173, 1223 and 1273 K for 4 h for homogenization, respectively. The magnetos...Tb0.29（Dy1–xPrx）0.71Fe1.97 （x=0, 0.1, 0.2 and 0.3） alloys prepared by the directional solidification method were treated at 1073, 1123, 1173, 1223 and 1273 K for 4 h for homogenization, respectively. The magnetostriction, micro-morphology and composition distribution were studied by the standard resistance strain gauge technique, optical microscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy （SEM-EDS）. The results indicated that heat treatment could make the microstructure of alloys homogeneous effectively and improve the magnetostriction significantly. The optimum temperature was 1223 K. Compared to the as-cast ones, the increase amplitudes of magnetostriction of the corresponding samples were 39.5%, 64.9%, 95.3% and 50.8% when x=0, 0.1, 0.2 and 0.3, respectively at the compressive stress of 2 MPa and a magnetic field of 80 kA/m. The compressive stress could also improve the magnetostriction. However, further Pr element addition and over high heat treatment temperature would lead to the excessive decomposition of PrFe2 and destroy the homogeneity, resulting in the decline of magnetostriction of alloys.展开更多
基金supported by National Natural Science Foundation of China(11047150)the financial support from the Science and Technological Program for Dongguan's Higher Education,Science and Research,and Health Care Institutions(2011108102025)the Research Programs of Dongguan University of Technology(2010ZQ02,2010ZQ03 and 2010ZQ06)
文摘Tb0.29（Dy1–xPrx）0.71Fe1.97 （x=0, 0.1, 0.2 and 0.3） alloys prepared by the directional solidification method were treated at 1073, 1123, 1173, 1223 and 1273 K for 4 h for homogenization, respectively. The magnetostriction, micro-morphology and composition distribution were studied by the standard resistance strain gauge technique, optical microscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy （SEM-EDS）. The results indicated that heat treatment could make the microstructure of alloys homogeneous effectively and improve the magnetostriction significantly. The optimum temperature was 1223 K. Compared to the as-cast ones, the increase amplitudes of magnetostriction of the corresponding samples were 39.5%, 64.9%, 95.3% and 50.8% when x=0, 0.1, 0.2 and 0.3, respectively at the compressive stress of 2 MPa and a magnetic field of 80 kA/m. The compressive stress could also improve the magnetostriction. However, further Pr element addition and over high heat treatment temperature would lead to the excessive decomposition of PrFe2 and destroy the homogeneity, resulting in the decline of magnetostriction of alloys.
