不同工况和应用场景下CAES-CFP三联产系统特性分析

To meet the goal of worldwide decarbonization,the transformation process toward clean and green energy structures has accelerated.In this context,coal-fired power plant(CFPP)and large-scale energy storage represented by compressed air energy storage(CAES)technology,are tasked with increasing renewable resource accommodation and maintaining the power system security.To achieve this,this paper proposes the concept of a CFPP-CAES combined cycle and a trigenerative system based on that.Considering the working conditions of the CFPP,thermal characteristics of three typical operation modes were studied and some general regularities were identified.The results of various potential integration schemes discussion indicated that extracting water from low-temperature points in the feedwater system to cool pressurized air and simultaneously increase the backwater temperature is beneficial for improving performance.In addition,preheating the pressurized air before the air expanders via lowgrade water in the feedwater system as much as possible and reducing extracted steam contribute to increasing the efficiency.With the optimal integration scheme,2.85 tonnes of coal can be saved per cycle and the round-trip efficiency can be increased by 2.24%.Through the cogeneration of heat and power,the system efficiency can reach 77.5%.In addition,the contribution degree of the three compression heat utilization methods to the performance improvement ranked from high to low,is preheating the feedwater before the boiler,supplying heat,and flowing into the CFPP feedwater system.In the cooling energy generation mode,the system efficiency can be increased to over 69%.Regardless of the operation mode,the benefit produced by integration is further enhanced when the CFPP operates at higher operating conditions because the coupling points parameters are changed.In addition,the dynamic payback period can be shortened by 11.33 years and the internal rate of return increases by 5.20%under a typical application scenario.Regarding the effect of different application scenarios in terms of economics,investing in the proposed system is more appropriate in regions with multiple energy demands,especially heating demand.These results demonstrate the technical advantages of the proposed system and provide guiding principles for its design,operation,and project investment.

Classification and technical target of water electrolysis for hydrogen production

Continuous efforts are underway to reduce carbon emissions worldwide in response to global climate change.Water electrolysis technology,in conjunction with renewable energy,is considered the most feasible hydrogen production technology based on the viable possibility of large-scale hydrogen production and the zero-carbon-emission nature of the process.However,for hydrogen produced via water electrolysis systems to be utilized in various fields in practice,the unit cost of hydrogen production must be reduced to$1/kg H_(2).To achieve this unit cost,technical targets for water electrolysis have been suggested regarding components in the system.In this paper,the types of water electrolysis systems and the limitations of water electrolysis system components are explained.We suggest guideline with recent trend for achieving this technical target and insights for the potential utilization of water electrolysis technology.

Technical efficiency of cocoa farms at varying elevation levels in Davao City, Philippines: implications to sustainable upland farming systems

Elevation is one of many components that influence agriculture, and this in turn affects the level of both inputs and outputs of farmers. This article focuses on the productivity and technical efficiency of 100 cocoa farms using cross-sectional data from areas ranging from 190 to 1021 m above sea level which were classified as low, medium, and high elevation in Davao City, considered as the chocolate capital of the Philippines. Using stochastic frontier analysis, the results showed that the cost of inputs per ha and the number of cocoa trees per ha significantly increase yield. Farms at high elevations were less technically efficient, as this entails lower temperatures and increased rainfall, and cocoa farming in those areas and conditions can be more challenging, especially with changes in farming practices, terrain, and distance to markets. Other significant variables were age of cocoa farms, married farmers, and age of the farmers. Older farms may be more developed, farmers who are married benefit from their spouses being able to readily contribute as farm labor, and lastly, older farmers' inefficiency may likely stem from nonadaptation of newer farming practices. With an average technical efficiency of 0.61, 0.63, and 0.26 in low, medium, and high elevation areas, respectively, farmers therefore have an incentive to improve farm practices and consider topographical variations found in high elevation areas. Recommendations for the improvement of technical efficiency of cocoa farms are better connectivity to markets, enhancing farm practices, and continuation and improvement of government programs on cocoa with an added emphasis on research. For farmers in high elevation areas, mitigating solutions such as sustainable agriculture practices and ecolabelling are key to improving efficiency and minimizing the potential negative impact on upland farming systems. Moreover, such adaptation measures may also contribute to sustainability of cocoa farming in high elevation areas.

Can whole steps of grain production be outsourced? Empirical analysis based on the three provinces of Jiangsu,Jilin,and Sichuan in China

Certain outsourcing services for agricultural management in China,such as pest control in grain production,have experienced prolonged sluggishness,contrasting with the relatively high level of outsourcing services observed in harvesting,land preparation,and sowing.This study examines the feasibility of implementing whole-step outsourcing in grain production by conducting a case study of rice and maize production in Jiangsu,Jilin,and Sichuan provinces in China.The provision of outsourcing services hinges on two essential conditions:technological advancements fostering specialized production and economies of scale,coupled with a market size sufficient to realize the aforementioned potential economies of scale.The results showed that outsourcing pest control or harvesting services had varying economies of scale.The outsourcing services in pest control were less common than in harvesting services,and their marginal growth space of the economies of scale with technological change was also smaller.Determined by the operational characteristics of pest control itself,the market scale of its professional services is small.Therefore,achieving the whole-step outsourcing of grain production necessitates not only technological innovation but also effective policy interventions to overcome the constraints of market scale.Such interventions include(1)optimizing crop layouts between planning regions and reducing land fragmentation and(2)supplying timely and effective inter-regional agricultural information for service providers aided by information technology.

Construction of a nomogram model to predict technical difficulty in performing laparoscopic sphincter-preserving radical resection for rectal cancer

BACKGROUND Colorectal surgeons are well aware that performing surgery for rectal cancer becomes more challenging in obese patients with narrow and deep pelvic cavities.Therefore,it is essential for colorectal surgeons to have a comprehensive understanding of pelvic structure prior to surgery and anticipate potential surgical difficulties.AIM To evaluate predictive parameters for technical challenges encountered during laparoscopic radical sphincter-preserving surgery for rectal cancer.METHODS We retrospectively gathered data from 162 consecutive patients who underwent laparoscopic radical sphincterpreserving surgery for rectal cancer.Three-dimensional reconstruction of pelvic bone and soft tissue parameters was conducted using computed tomography(CT)scans.Operative difficulty was categorized as either high or low,and multivariate logistic regression analysis was employed to identify predictors of operative difficulty,ultimately creating a nomogram.RESULTS Out of 162 patients,21(13.0%)were classified in the high surgical difficulty group,while 141(87.0%)were in the low surgical difficulty group.Multivariate logistic regression analysis showed that the surgical approach using laparoscopic intersphincteric dissection,intraoperative preventive ostomy,and the sacrococcygeal distance were independent risk factors for highly difficult laparoscopic radical sphincter-sparing surgery for rectal cancer(P<0.05).Conversely,the anterior-posterior diameter of pelvic inlet/sacrococcygeal distance was identified as a protective factor(P<0.05).A nomogram was subsequently constructed,demonstrating good predictive accuracy(C-index=0.834).CONCLUSION The surgical approach,intraoperative preventive ostomy,the sacrococcygeal distance,and the anterior-posterior diameter of pelvic inlet/sacrococcygeal distance could help to predict the difficulty of laparoscopic radical sphincter-preserving surgery.

Colorectal cancer screening:The value of early detection and modern challenges

The screening of colorectal cancer(CRC)is pivotal for both the prevention and treatment of this disease,significantly improving early-stage tumor detection rates.This advancement not only boosts survival rates and quality of life for patients but also reduces the costs associated with treatment.However,the adoption of CRC screening methods faces numerous challenges,including the technical limitations of both noninvasive and invasive methods in terms of sensitivity and specificity.Moreover,socioeconomic factors such as regional disparities,economic conditions,and varying levels of awareness affect screening uptake.The coronavirus disease 2019 pandemic further intensified these challenges,leading to reduced screening participation and increased waiting periods.Additionally,the growing prevalence of early-onset CRC necessitates innovative screening approaches.In response,research into new methodologies,including artificial intelligence-based systems,aims to improve the precision and accessibility of screening.Proactive measures by governments and health organizations to enhance CRC screening efforts are underway,including increased advocacy,improved service delivery,and international cooperation.The role of technological innovation and global health collaboration in advancing CRC screening is undeniable.Technologies such as artificial intelligence and gene sequencing are set to revolutionize CRC screening,making a significant impact on the fight against this disease.Given the rise in early-onset CRC,it is crucial for screening strategies to continually evolve,ensuring their effectiveness and applicability.

Adhesion of Technical Lignin-Based Non-Isocyanate Polyurethane Adhesives for Wood Bonding

Lignin is the most abundant aromatic natural polymer,and receiving great attention in replacing various petro-leum-based polymers.The aim of this study is to investigate the feasibility of technical lignin as a polyol for the synthesis of non-isocyanate polyurethane(NIPU)adhesives to substitute current polyurethane(PU)adhesives that have been synthesized with toxic isocyanate and polyols.Crude hardwood kraft lignin(C-HKL)was extracted from black liquor from a pulp mill followed by acetone fractionation to obtain acetone soluble-HKL(AS-HKL).Then,C-HKL,AS-HKL,and softwood sodium lignosulfonate(LS)were used for the synthesis of technical lignin-based NIPU adhesives through carbonation and polyamination and silane as a cross-linker.Their adhesion per-formance was determined for plywood.FTIR spectra showed the formation of urethane bonds and the reaction between lignin and silane.The NIPU adhesives prepared with C-HKL showed the highest adhesion strength among the three lignin-based NIPU adhesives.As the silane addition level increased,the adhesion strength of NIPU adhesives increased whereas formaldehyde emission decreased for all NIPU adhesives prepared.These results indicate that NIPU adhesives based on technical kraft lignin have a great potential as polyol for the synth-esis of bio-based NIPU adhesives for wood bonding.

Performance in the Fundamentals of Laparoscopic Surgery: Does it reflect global rating scales in the Objective Structured Assessment of Technical Skills in porcine laparoscopic surgery?

Objective:To correlate the utility of the Fundamentals of Laparoscopic Surgery(FLS)manual skills program with the Objective Structured Assessment of Technical Skills(OSATS)global rating scale in evaluating operative performance.Methods:The Asian Urological Surgery Training and Educational Group(AUSTEG)Laparoscopic Upper Tract Surgery Course implemented and validated the FLS program for its usage in laparoscopic surgical training.Delegates’basic laparoscopic skills were assessed using three different training models(peg transfer,precision cutting,and intra-corporeal suturing).They also performed live porcine laparoscopic surgery at the same workshop.Live surgery skills were assessed by blinded faculty using the OSATS rating scale.Results:From March 2016 to March 2019,a total of 81 certified urologists participated in the course,with a median of 5 years of post-residency experience.Although differences in task time did not reach statistical significance,those with more surgical experience were visibly faster at completing the peg transfer and intra-corporeal suturing FLS tasks.However,they took longer to complete the precision cutting task than participants with less experience.Overall OSATS scores correlated weakly with all three FLS tasks(peg transfer time:r=0.331,r^(2)=0.110;precision cutting time:r=0.240,r^(2)=0.058;suturing with intracorporeal knot time:r=0.451,r^(2)=0.203).Conclusion:FLS task parameters did not correlate strongly with OSATS globing rating scale performance.Although FLS task models demonstrated strong validity,it is important to assimilate the inconsistencies when benchmarking technical proficiency against real-life operative competence,as evaluated by FLS and OSATS,respectively.

Research progress and development of deep and ultra-deep drilling fluid technology

The research progress of deep and ultra-deep drilling fluid technology systematically reviewed,the key problems existing are analyzed,and the future development direction is proposed.In view of the high temperature,high pressure and high stress,fracture development,wellbore instability,drilling fluid lost circulation and other problems faced in the process of deep and ultra-deep complex oil and gas drilling,scholars have developed deep and ultra-deep high-temperature and high-salt resistant water-based drilling fluid technology,high-temperature resistant oil-based/synthetic drilling fluid technology,drilling fluid technology for reservoir protection and drilling fluid lost circulation control technology.However,there are still some key problems such as insufficient resistance to high temperature,high pressure and high stress,wellbore instability and serious lost circulation.Therefore,the development direction of deep and ultra-deep drilling fluid technology in the future is proposed:(1)The technology of high-temperature and high-salt resistant water-based drilling fluid should focus on improving high temperature stability,improving rheological properties,strengthening filtration control and improving compatibility with formation.(2)The technology of oil-based/synthetic drilling fluid resistant to high temperature should further study in the aspects of easily degradable environmental protection additives with low toxicity such as high temperature stabilizer,rheological regulator and related supporting technologies.(3)The drilling fluid technology for reservoir protection should be devoted to the development of new high-performance additives and materials,and further improve the real-time monitoring technology by introducing advanced sensor networks and artificial intelligence algorithms.(4)The lost circulation control of drilling fluid should pay more attention to the integration and application of intelligent technology,the research and application of high-performance plugging materials,the exploration of diversified plugging techniques and methods,and the improvement of environmental protection and production safety awareness.

Potential evaluation of saline aquifers for the geological storage of carbon dioxide: A case study of saline aquifers in the Qian-5 member in northeastern Ordos Basin

The well-developed coal electricity generation and coal chemical industries have led to huge carbon dioxide(CO_(2))emissions in the northeastern Ordos Basin.The geological storage of CO_(2) in saline aquifers is an effective backup way to achieve carbon neutrality.In this case,the potential of saline aquifers for CO_(2) storage serves as a critical basis for subsequent geological storage project.This study calculated the technical control capacities of CO_(2) of the saline aquifers in the fifth member of the Shiqianfeng Formation(the Qian-5 member)based on the statistical analysis of the logging and the drilling and core data from more than 200 wells in the northeastern Ordos Basin,as well as the sedimentary facies,formation lithology,and saline aquifer development patterns of the Qian-5 member.The results show that(1)the reservoirs of saline aquifers in the Qian-5 member,which comprise distributary channel sand bodies of deltaic plains,feature low porosities and permeabilities;(2)The study area hosts three NNE-directed saline aquifer zones,where saline aquifers generally have a single-layer thickness of 3‒8 m and a cumulative thickness of 8‒24 m;(3)The saline aquifers of the Qian-5 member have a total technical control capacity of CO_(2) of 119.25×10^(6) t.With the largest scale and the highest technical control capacity(accounting for 61%of the total technical control capacity),the Jinjie-Yulin saline aquifer zone is an important prospect area for the geological storage of CO_(2) in the saline aquifers of the Qian-5 member in the study area.

Analysis of the Impact of Technical Trade Barriers on the Export of Toys-Based on Analysis of Zhejiang,China

Technical barriers to trade,as a non-tariff barrier,have an increasing impact on the international market.As a major province in toy exports,Zhejiang Province’s toy export trade is therefore greatly hindered.This article aims to explore the impact of technical trade barriers on toy exports in Zhejiang Province and analyze countermeasures.Through literature review and some empirical analysis,it is found that technical trade barriers have greatly promoted the development of Zhejiang’s toy industry;however,they have also subjected it to impacts and pressures such as cost and technology.In response to the impact of technical trade barriers on toy exports,this article proposes corresponding countermeasures to avoid such barriers:firstly,establish a quality management system that complies with export product regulations to ensure that the products produced can meet international requirements and standards;secondly,reduce dependence on overseas markets;then enhance one’s own technology,and strengthen product innovation,in order to enhance the international competitiveness of the product and oneself;in addition,we should also explore diversified markets and expand the sales channels and coverage of our products.

Flashover Probability of Wind Turbine Blade and Impact of Strong Electromagnetic Pulse from Lightning Strikes on Wind Turbine Safety

This paper systematically studies the flashover probability of wind turbine blade lightning arrester and the impact of strong electromagnetic pulses on the local and surrounding wind turbines during lightning strikes.The research results indicate that the flashover probability of direct lightning strikes by the wind turbine blade lightning arrester is almost negligible,and the strong electromagnetic pulse of wind turbine blade during lightning strikes has a serious impact on the electronic equipment of the machine,while the impact on the surrounding wind turbine is relatively small.At the same time,the calculation formula for the reflection of lightning current on the carbon brush between the wind turbine hub and the engine compartment during the flashing of the wind turbine blades is provided,and the calculation method for calculating the spatial gradient distribution of electromagnetic field intensity using Biot-Savart Law theorem is applied.The limitations of using wind turbine blades for lightning protection are pointed out,and a technical route for achieving wind turbine lightning safety is proposed,which can be used as a reference for wind turbine lightning protection technicians.

Analysis of Technical Intelligence of Tumor Cell Therapy Based on Patent Map

Objective To analyze the technical information in the field of tumor cell therapy in China,and to provide reference for identifying technical trends and predicting technical opportunities.Methods Based on the patent data in the field of tumor cell therapy in China,the patent map method was used to construct a scientific technical information analysis model.Then,the technical status of new drug research and development in this field was explored to identify technical opportunities.Results and Conclusion Studies have found that China’s tumor immunotherapy is in the growth stage.The technical innovation regions are mainly distributed in the east and innovative entities are enterprises.Technology hotspots are concentrated in areas such as A61P35,C12N5,and the patented technical efficacy is high.Besides,the technical research and development opportunities identified are closely related to the background in this field.To better promote the development of the industry,enterprises and research institutions should strengthen cooperation in technological innovation Meanwhile,they should pay attention to technical efficacy analysis to identify more technical opportunities,thereby effectively guiding innovation strategic decisions.

ISO Certification and Technical Efficiency in the Banking Sector:An Evidence from WAEMU’s Countries Using the DEA Method

In the view of the international organization of standardization,the introduction of ISO standards is typical of quality management systems oriented towards strengthening the efficiency of enterprises.Business banks are not excluded from this requirement.The current study aims to evaluate the effect of ISO certification on the technical performance of WAEMU banks.Using BCEAO data(2020),the DEA model and Tobit estimates show that ISO certification has no effect on the efficiency scores of the banks in the sample.It is therefore appropriate for these banks to work on improving their business climate.

A Review of Artificial Waterfalls in Gardens

When artificial waterfalls are built in gardens,leaves from trees or vegetation often fall into the water storage pool and block the pipelines,requiring regular cleaning of pipelines.This not only increases the manpower needed for maintenance but also disrupts the use of the waterfalls.Therefore,it is necessary to design a new type of artificial waterfall that is suitable for gardens.The waterfall should incorporate features that make cleaning easier,including filter plates and water funnels to prevent clogging caused by fallen leaves and debris.

Study of The Technical Index of Online Learning Behavior Analysis of Nursing Majors on The Superstar Platform Based on The Kirkpatrick Evaluation Model

Objective:To analyze the technical indexes of students’online learning behavior analysis based on Kirkman’s evaluation model,sort out the basic indexes of online learning behavior,and extract scientific and efficient evaluation indexes of online learning effect through statistical analysis.Methods:The online learning behavior data of Physiology of nursing students from 2021-2023 and the first semester of 22 nursing classes(3 and 4)were collected and analyzed.The preset learning behavior indexes were analyzed by multi-dimensional analysis and a correlation analysis was conducted between the indexes and the final examination scores to screen for the dominant important indexes for online learning effect evaluation.Results:The study found that the demand for online learning of nursing students from 2021-2023 increased and the effect was statistically significant.Compared with the stage assessment results,the online learning effect was statistically significant.Conclusion:The main indicators for evaluating and classifying online learning behaviors were summarized.These two indicators can help teachers predict which part of students need learning intervention,optimize the teaching process,and help students improve their learning behavior and academic performance.

A Study on the Impact of Cheerleading on the Psychological Health of Female College Students

This study investigates the effects of technical cheerleading and dance cheerleading on the psychological health of female college students by utilizing the Symptom Checklist-90(SCL-90),the Comprehensive Diagnostic Scale for Interpersonal Relationships,and the Social Adaptability Diagnostic Scale.The findings indicate the following:(1)Technical cheerleading has a highly significant impact on sensitivity in interpersonal relationships,paranoia,and psychoticism,and a significant effect on anxiety and hostility;dance cheerleading has a highly significant effect on paranoia;(2)Both technical and dance cheerleading have minimal impact on the overall score distribution of interpersonal relationships among female college students,but the dimensions of their effects differ;(3)The impact of technical cheerleading on the social adaptability of female college students is more pronounced than that of dance cheerleading.

The Application of Reinforcement Theory in the Review Stage of English Teaching and Learning in Chinese Higher Vocational and Technical Colleges

Reinforcement theory is a behavioral psychology theory proposed by Skinner,which has been widely applied in various fields such as management and education.Positive reinforcement and negative reinforcement are the two types of reinforcement.By adopting these two different reinforcement methods appropriately,human behavior can develop in a positive direction.In the review stage of English teaching and learning in Chinese higher vocational and technical colleges,the use of different reinforcement methods based on various classes,individuals,conditions,and environments can effectively promote or change the behavior of teachers and students,thereby improving the effectiveness of the review.

Analysis of the Gravity-1 Sea Launch System and Technical Features

Sea launch has the characteristics of flexible launching points, high landing area safety, and good economy. In recent years, it has become one of the important launch methods. Since 2019, China has carried out a total of 11 successful sea launches. The Gravity-1(YL-1) sea launch system consists of a launch vehicle system and a sea launch platform. The sea launch program includes roll on/roll off boarding, sea mooring, sea maneuvering, anchoring and positioning, system testing, and formal launch. Through the maiden flight of YL-1, the design and manufacturing technology of large tonnage dedicated launch ship, launch vehicle vertical transfer and roll on/roll off boarding technology, anti-shake technology for sea launch, simple inflatable flexible insulation protective cover technology, and remote wireless measurement and control technology have been fully verified.

A Review of the Research on the Influencing Factors of Enterprise Key Core Technology Breakthrough

The breakthrough of key core technology is a theoretical and practical strategic issue to realize the rise of the country.This paper analyzes the concept of key core technology and its breakthrough and analyzes its characteristics.Based on the perspective of participants,this paper summarizes the influencing factors of key core technology breakthroughs in enterprises:internal and external enterprises,universities and scientific research institutions,and government.This paper expands the relevant research on key core technology breakthroughs and provides inspiration for enterprises to carry out key core technology research and breakthrough practices.