Simulation study of the performance of the Very Large Area gamma-ray Space Telescope

The Very Large Area gamma-ray Space Telescope(VLAST)is a mission concept proposed to detect gamma-ray photons through both Compton scattering and electron–positron pair production mechanisms,thus enabling the detection of photons with energies ranging from MeV to TeV.This project aims to conduct a comprehensive survey of the gamma-ray sky from a low-Earth orbit using an anti-coincidence detector,a tracker detector that also serves as a low-energy calorimeter,and a high-energy imaging calorimeter.We developed a Monte Carlo simulation application of the detector using the GEANT4 toolkit to evaluate the instrument performance,including the effective area,angular resolution,and energy resolution,and explored specific optimizations of the detector configuration.Our simulation-based analysis indicates that the current design of the VLAST is physically feasible,with an acceptance above 10 m^(2)sr which is four times larger than that of the Fermi-LAT,an energy resolution better than 2%at 10 GeV,and an angular resolution better than 0.2◦at 10 GeV.The VLAST project promises to make significant contributions to the field of gamma-ray astronomy and enhance our understanding of the cosmos.

The Tianma 65 m radio telescope antenna

The Tianma 65 m radio telescope(TMRT)at Shanghai is a fully steerable single-dish radio telescope in China,operating at centimeter to millimeter wavelengths(1.25 GHz to 50 GHz).This paper presents details on the main specifications,design,performance analysis,testing,and construction of the telescope antenna.The measured total efficiency is better than 50%over the whole elevation angle range,first sidelobe levels are less than−20 dB,antenna system noise temperatures are less than 70 K at 30°elevation angle,and pointing accuracy is less than 3″.The measured and calculated results are in good agreement,verifying the effectiveness of the design and analysis.

The Jiao Tong University Spectroscopic Telescope Project

The Jiao Tong University Spectroscopic Telescope(JUST)is a 4.4-meter f/6.0 segmented-mirror telescope dedicated to spectroscopic observations.The JUST primary mirror is composed of 18 hexagonal segments,each with a diameter of 1.1 m.JUST provides two Nasmyth platforms for placing science instruments.One Nasmyth focus fits a field of view of 10′and the other has an extended field of view of 1.2°with correction optics.A tertiary mirror is used to switch between the two Nasmyth foci.JUST will be installed at a site at Lenghu in Qinghai Province,China,and will conduct spectroscopic observations with three types of instruments to explore the dark universe,trace the dynamic universe,and search for exoplanets:(1)a multi-fiber(2000 fibers)medium-resolution spectrometer(R=4000-5000)to spectroscopically map galaxies and large-scale structure;(2)an integral field unit(IFU)array of 500 optical fibers and/or a long-slit spectrograph dedicated to fast follow-ups of transient sources for multi-messenger astronomy;(3)a high-resolution spectrometer(R~100000)designed to identify Jupiter analogs and Earth-like planets,with the capability to characterize the atmospheres of hot exoplanets.

Design and application of an autonomous Master Control System for a multi-layer magnetic and helioseismic telescope

With the growing significance of space weather forecasting,multi-layer magnetic and helioseismic telescopes are emerging as a key area of research.However,owing to the diverse operational processes and sophisticated hardware configurations of these devices,there is an urgent need for efficient autonomous observation capabilities.An autonomous Master Control System(MCS)can ensure efficient performance,data consistency,and stability,and the prototype presented here adopts a microservices architecture,breaking down the hardware into multiple subsystems and converting their functions into individual services.A central decision-making system leads the operations,supported by three auxiliary systems and three device control systems.Through inter-subsystem service calls,it achieves rapid imaging and spectroscopic monitoring.To verify system stability and observation efficiency,the system was tested on the Solar Full-disk Multi-layer Magnetograph.Experimental results verify this system can operate automatically for 4 consecutive months,acquire photospheric vector magnetic and Doppler velocity fields within a 15-minute interval,and measure chromospheric longitudinal magnetic and Doppler velocity fields in under 180 s.This ensures consistent and stable solar monitoring and serves as a practical methodological benchmark for the development of similar devices.

Basic Survey Scheduling for the Wide Field Survey Telescope(WFST)

Aiming at improving the survey efficiency of the Wide Field Survey Telescope, we have developed a basic scheduling strategy that takes into account the telescope characteristics, observing conditions, and weather conditions at the Lenghu site. The sky area is divided into rectangular regions, referred to as “tiles,” with a size of2°. 577 × 2°. 634 slightly smaller than the focal area of the mosaic CCDs. These tiles are continuously filled in annulars parallel to the equator. The brightness of the sky background, which varies with the moon phase and distance from the moon, plays a significant role in determining the accessible survey fields. Approximately 50connected tiles are grouped into one block for observation. To optimize the survey schedule, we perform simulations by taking into account the length of exposures, data readout, telescope slewing, and all relevant observing conditions. We utilize the Greedy Algorithm for scheduling optimization. Additionally, we propose a dedicated dithering pattern to cover the gaps between CCDs and the four corners of the mosaic CCD array, which are located outside of the 3° field of view. This dithering pattern helps to achieve relatively uniform exposure maps for the final survey outputs.

The Velocity Aberration Effect of the CSST Main Survey Camera

In this study,we conducted simulations to find the geometric aberrations expected for images taken by the Main Survey Camera of the Chinese Space Station Telescope(CSST)due to its motion.As anticipated by previous work,our findings indicate that the geometric distortion of light impacts the focal plane's apparent scale,with a more pronounced influence as the size of the focal plane increases.Our models suggest that the effect consistently influences the pixel scale in both the vertical and parallel directions.The apparent scale variation follows a sinusoidal distribution throughout one orbital period.Simulations reveal that the effect is particularly pronounced in the center of the Galaxy and gradually diminishes along the direction of ecliptic latitude.At low ecliptic latitudes,the total aberration leads to about a 0.94 pixel offset(a 20 minute exposure)and a 0.26 pixel offset(a 300 s exposure)at the edge of the field of view.Appropriate processings for the geometric effect during the CSST pre-and post-observation phases are presented.

Design and assembly of a nested imaging X-ray telescope for the Hot Universe Baryon Surveyor mission

The Hot Universe Baryon Surveyor (HUBS) mission will carry a nested X-ray telescope capable of observing an energy range from 0.5 keV to 2 keV to study hot baryon evolution. In this paper, we report the latest progress in the design and construction of nested X-ray telescopes which were designed to use a three-stage conic-approximation type assembly to simplify the manufacturing process. The mirror substrate is made using the thermal glass slumping method, with mirrors characterized by a root-mean-square roughness of 0.3 nm, with expected high reflectivity and good thermal stability. We also discuss methods of telescope construction and conduct a deformation analysis of the manufactured mirror. The in situ measurement system program is developed to guide the telescope assembly process.

Design and construction of charged-particle telescope array for study of exotic nuclear clustering structure

The exploration of exotic shapes and properties of atomic nuclei,e.g.,αcluster and toroidal shape,is a fascinating field in nuclear physics.To study the decay of these nuclei,a novel detector aimed at detecting multipleα-particle events was designed and constructed.The detector comprises two layers of double-sided silicon strip detectors(DSSD)and a cesium iodide scintillator array coupled with silicon photomultipliers array as light sensors,which has the advantages of their small size,fast response,and large dynamic range.DSSDs coupled with cesium iodide crystal arrays are used to distinguish multipleαhits.The detector array has a compact and integrated design that can be adapted to different experimental conditions.The detector array was simulated using Geant4,and the excitation energy spectra of someα-clustering nuclei were reconstructed to demonstrate the performance.The simulation results show that the detector array has excellent angular and energy resolutions,enabling effective reconstruction of the nuclear excited state by multipleαparticle events.This detector offers a new and powerful tool for nuclear physics experiments and has the potential to discover interesting physical phenomena related to exotic nuclear structures and their decay mechanisms.

The Tianma 65 m Radio Telescope Special Issue

Dear Readers:Large radio telescopes are important infrastructure for deep space navigation,astrophysics,astrometry,and other fields.Building a large radio telescope requires overcoming a series of technical challenges such as high-precision pointing,high reception efficiency,low-temperature wide-band reception,a complex and flexible control system,comprehensive performance testing,and gravity deformation correction techniques.Shanghai Astronomical Observatory,CAS,in collaboration with multiple research institutions,has implemented multiple key technologies and built the Tianma 65 m radio telescope(TMRT),with advanced performance and complete functionality.The overall performance has reached an international advanced level,greatly enhancing the orbital determination capability of China's lunar exploration satellites and deep space probes,and the telescope has demonstrated international VLBI observation and radio astronomy observation research capabilities.The six papers in this special issue introduce the research and development technology and experience of the TMRT from multiple aspects.The papers provide reference value for the research and application of subsequent radio telescopes.

Design and Cryogenic Performance of a Hexapod Platform for a Large Ground-based Wide Field Survey Telescope

The thermal gradient is an important factor that causes degradation to the image quality of telescopes. In order to ensure the accurate alignment of the primary focus unit and the primary mirror, the hexapod platform(as a corrector) is investigated in this paper. First, a ground-based telescope with 2.5 m aperture and 3.5 deg field of view is described. The telescope is under construction, and it is expected to be finished in 2023. Second, the hexapod platform with flexure hinges utilized to adjust the primary focus unit is proposed, which is applied as a corrector.Then, the inverse kinematics of the platform is established and an open-loop control system is built based on it.Finally, the cryogenic performance test for the hexapod platform is performed. The experimental results show that the resolution and repeatability of the translation for the hexapod platform can be achieved at the micrometer level.The resolution and repeatability of the rotation can be achieved at the arc-second level. Therefore, the cryogenic performance of the hexapod platform can meet the optical imaging requirements of the wide-field ground-based telescope. The kinematic analysis and cryogenic performance tests in the paper provide a technical reference for the precise alignment of the primary focus unit and the primary mirror, which can improve the imaging quality of the telescope.

Disturbance Observer-based Pointing Control of Leighton Chajnantor Telescope

Leighton Chajnantor Telescope(LCT), i.e., the former Caltech Submillimeter Observatory telescope, will be refurbished at the new site in Chajnantor Plateau, Chile in 2023. The environment of LCT will change significantly after its relocation, and the telescope will be exposed to large wind disturbances directly because its enclosure will be completely open during observation. The wind disturbance is expected to be a challenge for LCT's pointing control since the existing control method cannot reject this disturbance very well. Therefore, it is very necessary to develop a new pointing control method with good capability of disturbance rejection. In this research, a disturbance observer—based composite position controller(DOB-CPC) is designed, in which an H∞feedback controller is employed to compress the disturbance, and a feedforward linear quadratic regulator is employed to compensate the disturbance precisely based on the estimated disturbance signal. Moreover, a controller switching policy is adopted, which applies the proportional controller to the transient process to achieve a quick response and applies the DOB-CPC to the steady state to achieve a small position error. Numerical experiments are conducted to verify the good performance of the proposed pointing controller(i.e., DOB-CPC) for rejecting the disturbance acting on LCT.

Analysis of optical axis deviation caused by structural stiffness in equatorial telescopes

The impact of structural stiffness on optical axis deviation poses a significant challenge in the design of equatorial telescope structures.A comprehensive analysis during the design process can reduce the reliance of a telescope on advanced control technologies,thereby improving its economic feasibility.Although full-system finite element analyses are reliable,they are encumbered by significant time requirements and limitations in covering all possible telescope orientations.Therefore,we propose an efficient and comprehensive analytical method to evaluate the optical axis deviation of equatorial telescopes across a full range of angles.To address the challenge of ensuring that the analysis covers all possible positions of an equatorial telescope,based on a model from SiTian project,we analyze the optical axis deviations caused by the fork arm at 25 different angles and then use fitting methods to obtain results for all angles.Based on the analysis results of the optical axis deviation caused by the stiffness of the optical tube in the horizontal position,we derive the results for the tube at any position using geometric relationships.Finally,we calculate the coupling factors and combine these impacts.Furthermore,we identify six discrete feature points to reflect possible telescope orientations and conduct comprehensive finite element analyses.The results are in alignment with those acquired through a comprehensive computational approach.

The Tianma 65 m radio telescope at Shanghai

The Shanghai Tianma 65 m radio telescope(TMRT)is a large,fully rotatable radio telescope with multiple scientific purposes.The main body of the telescope and four low-frequency receiving systems,including L,C,and S/X bands,were completed between 2008 and 2012.From 2013 to 2017,four high-frequency receiving systems,including Ku,K,Ka,and Q bands,were constructed and their performance was comprehensively tested.There are three main innovations.(1)A fully movable large radio telescope system with advanced performance and complete functions has been built.(2)An advanced,reliable main reflector adjustment system has been completed,overcoming gravity deformation and creating a large antenna with a main reflective surface accuracy of 0.28 mm(root mean square)for any elevation.(3)Five innovative technologies have been developed to achieve high-precision pointing in any direction within 3″.The TMRT has made a crucial contribution to the orbital measurement and positioning of China’s lunar and deep space probes.Significantly enhancing China's ability to participate in international VLBI observations and radio astronomy,this has facilitated a series of achievements in observational radio astronomical research,in areas such as VLBI,spectral lines,and pulsars.

Prospects of the Multi-channel Photometric Survey Telescope in the Cosmological Application of Type Ia Supernovae

The Multi-channel Photometric Survey Telescope(Mephisto)is a real-time,three-color photometric system designed to capture the color evolution of stars and transients accurately.This telescope system can be crucial in cosmological distance measurements of low-redshift(low-z,z■0.1)Type Ia supernovae(SNe Ia).To optimize the capabilities of this instrument,we perform a comprehensive simulation study before its official operation is scheduled to start.By considering the impact of atmospheric extinction,weather conditions,and the lunar phase at the observing site involving the instrumental features,we simulate light curves of SNe Ia obtained by Mephisto.The best strategy in the case of SN Ia cosmology is to take the image at an exposure time of 130 s with a cadence of 3 days.In this condition,Mephisto can obtain hundreds of high-quality SNe Ia to achieve a distance measurement better than 4.5%.Given the on-time spectral classification and monitoring of the Lijiang 2.4 m Telescope at the same observatory,Mephisto,in the whole operation,can significantly enrich the well-calibrated sample of supernovae at low-z and improve the calibration accuracy of high-z SNe Ia.

Surface shape detection methods for large radio telescopes

The surface accuracy of a radio telescope is directly related to its operational efficiency and detection sensitivity.This is crucial under high-frequency observation conditions,where surface shape errors need to be controlled to within 1/16 of the working wavelength.In addition,the primary reflector of large radio telescopes is subject to dynamic deformation,caused by factors such as gravity and thermal effects.This paper presents a method for detecting the surface shape of radio telescopes using radio interferometry techniques combined with active reflector adjustment technology.This enables accurate assessment and correction of surface errors,ensuring the electrical performance of the radio telescope.This study investigates the practical applications of high-precision measurement techniques,such as microwave holography,out-of-focus holography,and wavefront distortion methods at the Tianma 65 m radio telescope(TMRT).Furthermore,the study presents the construction method of gravity models at different elevation angles and demonstrates the efficacy of the active reflector model.The results of the measurements indicate that the application of these methods to the TMRT has led to a notable enhancement of the accuracy of the primary reflector and a substantial improvement in efficiency in the Q-band.Through a process of iterative measurements and adjustments,the surface shape error is ultimately reduced to 0.28 mm root mean square(RMS).

A high-contrast imaging coronagraph for segmented-mirror large aperture telescopes using a spatial light modulator

The primary mirrors of current and future large telescopes always employ a segmented mirror configuration.The small but non-negligible gaps between neighboring segments cause additional diffraction,which restricts the performance of high-contrast coronagraph.To solve this problem,we propose a coronagraph system based on a single liquid crystal spatial light modulator(SLM).This spatial light modulator is used for amplitude apodization,and its feasibility and potential performance are demonstrated using a laboratory setup using the stochastic parallel gradient descent(SPGD)algorithm to control the spatial light modulator,which is based on point spread function(PSF)sensing and evaluation and optimized for maximum contrast in the discovery working area as a merit function.The system delivers a contrast in the order of 10−6,and shows excellent potential to be used in current and future large aperture telescopes,both on the ground and in space.

Are James Webb Space Telescope Observations Consistent with Warm Dark Matter?

We compare observed with predicted distributions of galaxy stellar masses M* and galaxy rest-frame ultra-violet luminosities per unit bandwidth LUV, in the redshift range z=2 to 13. The comparison is presented as a function of the comoving warm dark matter free-streaming cut-off wavenumber kfs. For this comparison the theory is a minimal extension of the Press-Schechter formalism with only two parameters: the star formation efficiency, and a proportionality factor between the star formation rate per galaxy and LUV. These two parameters are fixed to their values obtained prior to the James Webb Space Telescope (JWST) data. The purpose of this comparison is to identify if, and where, detailed astrophysical evolution is needed to account for the new JWST observations.

Integrated Test System for Large-aperture Telescopes Based on Astrophotonics Interconnections

This study aims to improve the integrated testing of large-aperture telescopes to clarify the fundamental principles of an integrated testing system based on astrophotonics.Our demonstration and analyses focused on element-position sensing and modulation based on spatial near-geometric beams,high-throughput step-difference measurements based on channel spectroscopy,distributed broadband-transmittance testing,and standard spectral tests based on near-field energy regulation.Comprehensive analyses and experiments were conducted to confirm the feasibility of the proposed system in the integrated testing process of large-aperture telescopes.The results demonstrated that the angular resolution of the light rays exceeded 5arcsec,which satisfies the requirements for component-position detection in future large-aperture telescopes.The measurement resolution of the wavefront tilt was better than 0.45μrad.Based on the channel spectral method—which combined a high signal-to-noise ratio and high sensitivity,along with continuous-spectral digital segmentation and narrowband-spectral physical segmentation—a resolution of 0.050μm and a range of 50μm were obtained.After calibration,the measurement resolution of the pupil deviation improved to exceed 4%accuracy,and the transmission measurements achieved a consistency of over 2%accuracy.Regarding fringe-broadband interferometry measurements,the system maintained high stability,ensuring its operation within the coherence length,and robustly detected the energy without unwrapping the phase.The use of a projector for calibrating broadband-spectrum measurements led to a reduction in contrast from 0.8142 to 0.6038,which further validates the system's applicability in the integrated testing process of large-aperture telescopes.This study greatly enhanced the observational capabilities of large-aperture telescopes while reducing the integrated system's volume,weight,and power consumption.

deepCR宇宙线识别方法在CSST巡天数据处理中的可用性及稳定性定量评价研究

deepCR宇宙线识别方法是哈勃空间望远镜(Hubble Space Telescope,HST)剔除宇宙线的有效方法,但这一方法是否可以满足中国空间站望远镜(China Space Station Telescope,CSST)的要求,始终缺乏科学的定量分析。采用哈勃望远镜的真实观测数据,对deepCR宇宙线识别方法进行了深入分析,对其稳定性和可用性进行了实测研究。结果表明,deepCR在天空背景区域识别宇宙线的灵敏度较高,但越靠近星像中心,deepCR识别宇宙线的灵敏度越低。分析了宇宙线密度和测光精度的关系,发现当宇宙线密度达到9%时,几乎100%的星受到宇宙线的污染;当宇宙线密度达到14%时,对于不同轮廓面积的星,存在20%~50%的异常测光结果。实验结果表明,deepCR宇宙线识别模型稳定性相对较好,一次建模后可以在较长时间内应用。但在高精度测光等应用场景仍面临着一系列问题,需要有针对性的解决方案。

基于兴隆观测基地80厘米望远镜的CSST无缝光谱地面测试

我国预计2025年发射的巡天空间望远镜(Chinese Space Station Telescope,CSST),主要用于开展大规模的多色成像与无缝光谱巡天工作。发射前需要利用地基望远镜对空间望远镜的光学成像系统、探测器,以及设备长时间运行稳定性进行地面测试。设计了兴隆观测基地80 cm望远镜的无缝光谱地面测试,利用A型恒星、B型恒星和沃尔夫拉叶星HD4004的强吸收和发射线特征,拟合色散方程,并发现色散方程具有空间分布特征。对HR3173的53条数据的零级谱位置信息及色散方程系数进行了二次曲面拟合,并利用该曲面对HR3173零级像位置范围内的HR718数据进行了波长定标,得到的CCD上8×13 pixels范围内的平均视向速度精度为51 km/s。