Effects of Light and Temperature Factors on Biomass Accumulation of Winter Wheat

[Objective] The study aimed to discuss the influence of light and temperature factors on biomass accumulation of winter wheat at each growth stage and changes in biomass of each organ. [Method] Based on the observation data from Xifeng Agrometeorological Experiment Station of Gansu Province, including phenophase and yield factors of winter wheat in 1981 -2008, biomass at three-leaves, overwintering, jointing, heading, milky maturity, and maturity stages in 1995 -2008, and meteorological data in 1995 -2008, the variation patterns of the biomass accumulation and the influence of TEP （thermal effectiveness photosynthetically active radiation） on the biomass of winter wheat at every growth stage were ana- lyzed. [Result] The biomass accumulation of winter wheat in the whole growth period presented ＂S＂ curve, with the maximum value from heading to milky maturity stage. Since 1981, TEP from heading to milky maturity stage increased with a rate of 3. 314 MJ/（m2 · a）, and the changing curves of TEP at other stages were like parable curves. TEP from turning green to jointing stage and from milky maturity to maturity stage had a higher value in the 1990s and a lower val.ue in the 1980s and early 21st century, while that from jointing to heading stage had a lower value in the 1990s but a higher value in the 1980s and early 21st century. There was a significant correlation between TEP at each growth stage and the actual yield. LAI （leaf area index） at each development stage also had a significant correlation with the utilization rate of TEP at corresponding stage. When LAI at jointing and heading stages increased by I, the utilization rate of TEP correspondingly increased by 0. 049 and 0.259 g/MJ respectively. [ Conclusion] The research could provide theoretical references for the scientific planting and management of winter wheat in future. Key words Light and temperature factors; Winter wheat; Biomass; Influence; China

Factors Affecting Transformation Temperatures in Fe-Mn-Si-Cr-Ni Shape Memory Alloy

The effects of prestrain and annealing temperature on phase transformation temperatures in Fel4Mn5Si8Cr4Ni shape memory alloy have been studied. The results showed that when the annealing temperature was 673 K, both the At and the Ms temperatures increased appreciably as the prestrain increased, the As temperature increased slightly with increasing prestrain; the resistivity difference at 303 K between the heating and cooling curve also increased with increasing prestrain, which agreed with the recovery strain. The shape memory effect in Fe-Mn-Si-Cr-Ni shape memory alloy is caused by the stress-induced γ→ε martensite transformation and its reverse transformation. When the prestrain was 10%, the Ms temperature decreased remarkably as the annealing temperature increased.

Physical, Psychological, and Social Health Impact of Temperature Rise Due to Urban Heat Island Phenomenon and Its Associated Factors

The Urban Heat Island Effect（UHI）has now become a commonly observed phenomenon worldwide.Indeed,it has become a significant environmental effect of urbanisation.In Malaysia,research results showed that UHI effects are very evident in several cities such as Kuala Lumpur and Putrajaya.UHI effect has long been observed to cause temperature of cities.

IMPROVEMENT OF REGIONAL PREDICTION OF SEA FOG ON GUANGDONG COASTLAND USING THE FACTOR OF TEMPERATURE DIFFERENCE IN THE NEAR-SURFACE LAYER

The relationship between the factor of temperature difference of the near-surface layer(T_(1000 hPa)-T_(2m))and sea fog is analyzed using the NCEP reanalysis with a horizontal resolution of l°xl°(2000 to 2011) and the station observations(2010 to 2011).The element is treated as the prediction variable factor in the GRAPES model and used to improve the regional prediction of sea fog on Guangdong coastland.(1) The relationship between this factor and the occurrence of sea fog is explicit:When the sea fog happens,the value of this factor is always large in some specific periods,and the negative value of this factor decreases significantly or turns positive,suggesting the enhancement of warm and moist advection of air flow near the surface,which favors the development of sea fog.(2) The transportation of warm and moist advection over Guangdong coastland is featured by some stages and the jumping among these states.It also gets stronger over time.Meanwhile,the northward propagation of warm and moist advection is quite consistent with the northward advancing of sea fog from south to north along the coastland of China.(3) The GRAPES model can well simulate and realize the factor of near-surface temperature difference.Besides,the accuracy of regional prediction of marine fog,the relevant threat score and Heidke skill score are all improved when the factor is involved.

Analysis on Change Characteristics of Diurnal Temperature Range in Benxi County from 1958 to 2010

Based on annual mean maximum and minimum temperatures,diurnal temperature range,precipitation,sunshine,total cloud cover and water barometric pressure data in Benxi County from 1958 to 2010,using statistical analysis,the results show that the annual and seasonal diurnal temperature ranges present significant decreasing tendencies,and the reducing tendency is the most remarkable in winter. Autumn reducing tendency is stronger than that in spring,and it is the weakest in summer. Annual and seasonal average temperatures,average maximum and minimum temperatures all present the remarkable rising trends. Rising trend of the minimum temperature is more significant than that of the maximum temperature. The monthly mean diurnal temperature range also presents reducing tendency,and the most reducing scope appear in January and February. Annual and season diurnal temperature range changes are related to sunshine,mean minimum temperature,mean maximum temperature,precipitation,total cloud cover and water barometric pressure,but various essential factors are different in each season. Annual mean temperature,annual mean minimum temperature,annual mean maximum temperature and annual diurnal temperature range all have sudden changes,but the age is inconsistent.

X-Ray and Neutron Diffraction Studies on Thermal Parameters of Thalous Bromide

Thermal parameters of TIBr were determined using both X-ray and neutron diffraction techniques. The data was analysed by Rietveld profile refinement procedure. From the neutron diffraction data, due to weak odd-order reflections, it was not possible to determine the individual thermal parameters. TheX-ray diffraction measurements yielded BT1=0.296(5) nm2 and BBr=0.162(5) nm2. The overall isotropic value, B was 0.252(7) nm2 which is in good agreement with B=0.230(8) nm2 obtained from present neutron diffraction measurements. The present values are also in good agreement with theoretical estimates obtained from the shell models.

The balance of flexibility and rigidity in the active site residues of hen egg white lysozyme

The crystallographic temperature factors （B factor） of individual atoms contain important information about the thermal motion of the atoms in a macromolecule. Previously the theory of flexibility of active site has been established based on the observation that the enzyme activity is sensitive to low concentration denaturing agents. It has been found that the loss of enzyme activity occurs well before the disruption of the three-dimensional structural scaffold of the enzyme. To test the theory of conformational flexibility of enzyme active site, crystal structures were perturbed by soaking in low concentration guanidine hydrochloride solutions. It was found that many lysozyme crystals tested could still diffract until the concentration of guanidine hydrochloride reached 3 M. It was also found that the B factors averaged over individually collected data sets were more accurate. Thus it suggested that accurate measurement of crystal temperature factors could be achieved for medium-high or even medium resolution crystals by averaging over multiple data sets. Furthermore, we found that the correctly predicted active sites included not only the more flexible residues, but also some more rigid residues. Both the flexible and the rigid residues in the active site played an important role in forming the active site residue network, covering the majority of the substrate binding residues. Therefore, this experimental prediction method may be useful for characterizing the binding site and the function of a protein, such as drug targeting.

Variation of Soil CO_2 Flux and Carbon Density in Three Apline Meadows

Three alpine meadows were chosen from the eastern margin of the Qilian Mountain：Polygonum viviparum meadow（P）,Stipa capillata grassland（S）and Rhododendron simsii shrub meadow（R）;LI-8100 A soil CO2 flux auto-monitoring system and lab analysis were applied to analyze the soil organic carbon density,dynamics of carbon flux,and their relationship with environmental factors.The results showed that different vegetations varied greatly in soil organic carbon density：R 〉 S 〉 P,and the soil carbon density reduced with the increasing depth;soil CO2flux：S 〉 P 〉 R,and sample plot P and S showed unimodal changes.The peak values appeared at 14：00-15：00 p.m.;soil CO2 flux was negatively correlated with near-ground air humidity and carbon content,positively correlated with soil temperature and near-ground air temperature,and showed no obvious correlation with soil moisture.

Analyses toward factors influencing sealing clearance of a metal rubber seal and derivation of a calculation formula

Sealing clearance is a key factor for a metal rubber seal＇s sealability. The expansion coef- ficient and expansion deformation in the radial direction of metal rubber have been obtained through a thermal expansion experiment of metal rubber. The influence of the elastic modulus to the sealing clearance has been analyzed theoretically. By combining the temperature and elasticity factors of metal rubber with the elastic mechanics theory, the calculation formula of the sealing clearance has been derived, and the values of the sealing clearance and the leakage rate in certain working conditions have been calculated. Experimental results are consistent with calculation results in a high degree. The calculation formula of the sealing clearance can explain the influences of the temperature and elastic modulus factors of metal rubber on the sealing clearance. It can pro- vide guidance for the study of sealing mechanism of metal rubber seals.

Magnetic properties and magnetic exchange interactions in Gd_(1–x)RE_x(RE=Pr,Nd) alloys

The effect of Pr,Nd addition on the magnetic properties and magnetic exchange interaction of gadolinium alloys was systematically studied.Curie temperature TC and magnetic moment of Gd（1–x）REx（RE=Pr,Nd）systems with x〈0.05 were investigated.When x〈0.05,Pr and Nd formed respectively with Gd continuous solid solution which has the crystalline structure HCP.Study on the magnetic behavior indicated that at near room temperature,the simple ferromagnetism prevailed in these two systems of alloy.The Curie temperature and magnetic moment of Gd（1–x）REx alloy decreased with RE（RE= Pr,Nd）content x increasing.The de Gennes factor of Gd（1–x）REx alloy which was associated with the exchange interaction between magnetic spin components also decreased with RE content increasing.The above results showed that the magnetic exchange interaction between magnetic atoms in gadolinium could be effectively changed by the Pr,Nd addition.