Spalling characteristics of high-temperature treated granitic rock at different strain rates

The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with different temperatures and strain rates.A series of dynamic spalling tests with different impact velocities were conducted on thermally treated granite at different temperatures.The dynamic spalling strengths of granite with different temperatures and strain rates were determined.A model was proposed to correlate the dynamic spalling strength of granite,high temperature and strain rate.The results show that the spalling strength of granite decreases with increasing temperature.Moreover,the spalling strength of granite with a higher strain rate is larger than that with a lower strain rate.The proposed model can describe the relationship among dynamic spalling strength of granite,high temperature and strain rate.

Prediction of three-dimensional ocean temperature in the South China Sea based on time series gridded data and a dynamic spatiotemporal graph neural network

Ocean temperature is an important physical variable in marine ecosystems,and ocean temperature prediction is an important research objective in ocean-related fields.Currently,one of the commonly used methods for ocean temperature prediction is based on data-driven,but research on this method is mostly limited to the sea surface,with few studies on the prediction of internal ocean temperature.Existing graph neural network-based methods usually use predefined graphs or learned static graphs,which cannot capture the dynamic associations among data.In this study,we propose a novel dynamic spatiotemporal graph neural network(DSTGN)to predict threedimensional ocean temperature(3D-OT),which combines static graph learning and dynamic graph learning to automatically mine two unknown dependencies between sequences based on the original 3D-OT data without prior knowledge.Temporal and spatial dependencies in the time series were then captured using temporal and graph convolutions.We also integrated dynamic graph learning,static graph learning,graph convolution,and temporal convolution into an end-to-end framework for 3D-OT prediction using time-series grid data.In this study,we conducted prediction experiments using high-resolution 3D-OT from the Copernicus global ocean physical reanalysis,with data covering the vertical variation of temperature from the sea surface to 1000 m below the sea surface.We compared five mainstream models that are commonly used for ocean temperature prediction,and the results showed that the method achieved the best prediction results at all prediction scales.

Temperature influences of the recoil characteristics for aluminum honeycomb buffer in the tether-net launcher

Fluctuations in outer space's temperature would affect the spacecraft's regular operation.This paper aims to study the temperature influences of the aluminum honeycomb buffer in the tether-net launcher.Firstly,a buffer structure was designed to attenuate the pyroshock generated by the pyrotechnic device.Secondly,the mechanical properties of aluminum honeycomb at different temperatures were obtained through quasi-static compression experiments.Then,the internal ballistic responses of the launcher were gained by the closed bomb tests and the equivalent classical interior ballistic model.Finally,the recoil performance of the launcher with aluminum honeycomb buffer at different temperatures was studied.It is revealed that the aluminum honeycomb crushing force gradually decreases with the temperature increases.The peak pressure,burning rate coefficient and velocity increase while the peak time decreases with the temperature increase for the interior ballistics.For the launcher recoil responses,the average launch recoil decreases if the aluminum honeycomb doesn't enter the dense stage.The impact acceleration,projectile velocity and displacement increase as the temperature increase.The paper spotlights the temperature's influence on the recoil characteristics of the aluminum honeycomb buffer,which provides a new idea for buffering technology of pyrotechnic devices in a complex space environment.

Behavior Characteristics of Asphalt Components during the Process of Nano-cracks Temperature Self-healing

In order to investigate the behavior characteristics of asphalt components during the process of nano-cracks temperature self-healing(NTS),molecular simulation technology was used to simulate the temperature self-healing of asphalt.Based on the determination of asphalts(virgin asphalt and aged asphalt),the proportional changes of asphalt components were confirmed.The distribution characteristics of asphalt components were obtained by marking different components in the process of NTS.At the same time,the rationality of the micro simulation findings was confirmed by asphalt performance tests and infrared spectroscopy results.The results show that different asphalt components have different behavior characteristics in the process of NTS.The content of asphaltene and resin plays a key role in the process of NTS,while saturation and aromatics play an active role in the temperature self-healing before and after aging.The NTS is the result of the comprehensive action of different components,and the self-healing efficiency is proportional to the relative molecular mass.The effect of aging on the NTS is also realized by changing the proportion of asphalt components.

Expression Characteristics of AaHsp90 Gene in Antheraea assamensis under Different Temperature and Starvation Stress

[Objectives]To investigate the effects of different temperature and starvation stress on the expression of AaHsp90 and reveal the molecular mechanism of adaptation to environment in Antheraea assama.[Methods]Taking the normal feeding group at 26℃as the control,the expression change of AaHsp90 was detected by real-time PCR in midgut,fat body and hemlymph after high temperature stress at 38℃,low temperature stress at 4℃and starvation stress separately for different time on the third day of the fifth larvae.[Results]The expression of AaHsp90 in midgut,fat body and hemlymph of Antheraea assama were increased obviously at first and then decreased sharply with the prolongation of treatment time at 38℃.There has a certain inhibitory effect on the expression of AaHsp90 in midgut,fat body and hemolymph after treatment with 4℃for different time.After treatment with starvation,the AaHsp90 expression were increased at 12 and 18 h and decreased sharply at 24 h in midgut,fat body and hemolymph of A.assama.[Conclusions]Comprehensive analysis showed that high temperature and starvation stress can induce the expression of AaHsp90,while low temperature stress mainly suppressed its expression.It was suggested that the AaHsp90 protein may play an important role in the process of adaptation to high temperature and starvation stress in A.assama.

Analysis on Climatic Characteristics of High Temperature Weather in Longdong Region

Using meteorological data from 8 national basic meteorological observation stations in Qingyang City of Longdong region from 1972 to 2021,the causes and change characteristics of high-temperature weather were analyzed,and targeted countermeasures and suggestions were proposed for residents' production,life,and energy security supply affected by high-temperature weather.The results showed that①affected by global warming,the annual average temperature,annual average maximum temperature,annual extreme maximum temperature,days of daily maximum temperature≥30℃,and days of daily maximum temperature≥35℃in Longdong region were all showing an upward trend;②due to the different terrain and soil properties of the underlying surface,the increase in high temperature weather varied in different regions.Due to the influence of desert and hilly terrain,the frequency and days of high temperature occurrence were relatively high in the central and northern parts of Qingyang City.Due to the climate regulation of the Ziwuling Mountains,the days of high temperature in the central and southern parts was significantly less than that in the central and northern parts;③if the warm high pressure ridge on the Qinghai-Tibet Plateau developed strongly in summer,the temperature of the closed warm center reached 0-4℃on the 500 hPa of high-altitude weather map.If the warm air mass developed eastward,it often led to sustained high temperature weather in Longdong region;④when the El Nino phenomenon occurred,the subtropical high in the western Pacific developed strongly in summer,with a center located northward,which was stable,with little movement.It was dry,sunny,hot,and rainless in Longdong region,and the high temperature weather was more significant than that in normal years.

Characteristic Analysis of the Temperature Variation in Baoji City in Past 52 Years

The characteristics of the temperature variation in Baoji City were analyzed with the temperature data from 1952 to 2003.The results showed that the value of annual average temperature and seasonal average temperature wavily rose before 1980 and obviously ascended after 1980.During the period of last 52 years,there was a process of ascent-descent-ascent in summer seasonal temperature variation.While in autumn and winter,the temperature decreased at first and then increased.The steady ascent of the temperature in summer season had a great contribution to the increment of its average temperature.The type of the variation trend in the average temperature in Baoji in recent 52 years was verified according to the results.

1.3μm AlInGaAs Strained Single Quantum Well Laser Diodes with High Characteristic Temperature of 200K

A high characteristic temperature （T0） of 200K from a 1.3μm AlInGaAs/AlInAs single-quantum-well laser diode with the asymmetric waveguide layer structure under CW operation at 20 to 80℃ was obtained,which is the best result reported in the laser diodes （LDs） of the same active materials structure and emitting wave- length. AllnGaAs as an active layer,therefore,is very promising for the fabrication of long-wavelength LDs with excellent high-temperature performance. It is found that the asymmetric waveguide layer structure can decrease optical absorption and improve the high-temperature performance and catastrophic optical damage threshold of LDs.

Dielectric properties and temperature increase characteristics of zinc oxide dust from fuming furnace

Cavity perturbation method was used to determine the dielectric properties （ε′,ε″, and tanδ） of zinc oxide dust in different apparent densities. The process was conducted to study the microwave-absorption properties of zinc oxide dust and the feasibility of microwave roasting zinc oxide dust to remove fluorine and chlorine. The dielectric constant, dielectric loss, and loss tangent were proportional to the apparent density of zinc oxide dust. The effects of sample mass and microwave power on the temperature increase characteristics under the microwave field were also studied. The results show that the apparent heating rate of the zinc oxide dust increases with the increase in microwave roasting power and decreases with the increase in the sample mass. The temperature of the samples reaches approximately 800 ＆#176;C after microwave treatment for 8 min, which indicates that the zinc oxide dust has strong microwave-absorption ability.

The Evolutionary Characteristics of the Temperature in Typical Counties in Southwest China——Taking Meitan County in Guizhou Province as an Example

Based on the method of linear trending,analysis was made upon the daily temperature statistics of Meitan County from 1951 to 2009,and the results showed that the temperature in general was on the rise.With 1980 as the turning point,it was on the decline before while later the temperature increased quickly.Among these figures,the variation rates of annual average temperature,annual maximum temperature,and annual minimum temperature are 0.11 ℃/10 a,0.08 ℃/10 a,and 0.36 ℃/10 a.The variation rates of average temperature in spring,summer,fall and winter are respectively 0.12 ℃/10 a,0.07 ℃/10 a,0.12 ℃/10 a,and 0.13 ℃/10 a.Morlet wavelet was adopted to analyze the periodicity of temperature change which has periods of different scales.But since 2000,during different time scales most of the areas have been in the period of temperature rises.Besides,certain rule exists in the periodicity of maximum temperature and minimum temperature.Before 1970s,they had opposite changing rules,and the alteration of the peak value occurred.However,in the late 1980s,they had similar changing rules,and their peak values appeared at the same time.It means that against the background of global warming,the reaction of temperature evolution in Meitan County is quite remarkable.

Research on Air Temperature Variation Characteristics and Trend in Tacheng Prefecture in Xinjiang during 1954-2008

[Objective] The aim was to analyze the changes characteristics of temperature in Tacheng.[Method] By dint of monthly average temperature from 1955 to 2008 in four typical meteorology station,Tacheng,Hebukesai’er,Tuoli and Wusu,the temperature multi-temporal scale characteristics and changes trend in future in Tacheng were expounded by small wave analysis and climate trend coefficient method.[Result] The average temperature in so many years in Tacheng was 5.88 ℃.The annual changes of temperature were relatively stable.The coefficient of changes were between 0.130-0.265.The extreme value was between 1.73-3.79;the sequence distribution of temperature showed plat peak form and the annual average temperature was divergence.The temperature in Tacheng had 5-year,9-year and 14-year period.It was in cold period in 1970 when average temperature was only 3.77 ℃.The 1980s was the warmest age in recent 54 years,reaching 8.10℃.In recent 90s,and comparing with 80s,temperature in Tacheng was decreasing,but still higher than that in 70s.It was forecasted that the temperature in future would increase.The annual average temperature in each area and the average temperature in each season in Tacheng increased significantly,with a range of 1.15-2.05 ℃/10 a.The smallest temperature increase speed in summer was 0.16-0.45 ℃/10 a.The annual average temperature changes speed was 0.40-0.78 ℃/10 a.[Conclusion] The temperature changes in Tacheng had positive corresponding trend toward the climate warming.

High Temperature Characteristics of 3C-SiC/SiHeterojunctionDiodes Grown by LPCVD

The high temperature (300 ～480K) characteristics of the n-3C-SiC/p-Si heterojunction diodes (HJD) fabr icated by low-pressure chemical vapor deposition on Si (100) substrates are inv estigated.The obtained diode with best rectifying properties has 1.8×104 of ratio at room temperature,and slightly rectifying characteristics with 3.1 of rectification ratio is measured at 480K of an ambient temperature .220V of reverse breakdown voltage is acquired at 300K.Capacitance-voltage char acteristics show that the abrupt junction model is applicable to the SiC/Si HJD structure and the built-in voltage is 0.75V.An ingenious equation is employed to perfectly simulate and explain the forward current density-voltage data meas ured at various temperatures.The 3C-SiC/Si HJD represents a promising approach for the fabrication of high quality heterojunction devices such as SiC-emitter heterojunction bipolar transistors.

Temperature Characteristics of Bilayer Thin-Film Devices Under Organic Interface Limited Current Conduction

Temperature characteristics are important for the performance of organic thin film devices. On the basis of the hopping theory of Miller-Abrahams,an analytical model of charge transport for bilayer organic devices under the organicorganic interface limited current conduction is developed. The dependence of current, field,and carrier distribution in bilayer organic devices with the structure of ＂injection electrode/Layer Ⅰ/Layer Ⅱ/collection electrode＂ on temperature are numerically analyzed. We conclude that, for a given applied voltage, when temperature is raised, the voltage of LayerⅠ will increase,and the field will be higher. Meanwhile, the voltage of Layer Ⅲ will decrease, the field will become weaker accordingly,and the current of the device will increase.

Rice canopy temperature is affected by nitrogen fertilizer

Canopy temperature strongly influences crop yield formation and is closely related to plant physiological traits.However, the effects of nitrogen treatment on canopy temperature and rice growth have yet to be comprehensively examined. We conducted a two-year field experiment with three rice varieties(HD-5, NJ-9108, and YJ-805) and three nitrogen treatments(zero-N control(CK), 200 kg ha~(–1)(MN), and 300 kg ha~(–1)(HN)). We measured canopy temperature using a drone equipped with a high-precision camera at the six stages of the growth period. Generally,canopy temperature was significantly higher for CK than for MN and HN during the tillering, jointing, booting, and heading stages. The temperature was not significantly different among the nitrogen treatments between the milky and waxy stages. The canopy temperature of different rice varieties was found to follow the order: HD-5>NJ-9108>YJ-805, but the difference was not significant. The canopy temperature of rice was mainly related to plant traits, such as shoot fresh weight(correlation coefficient r=–0.895), plant water content(–0.912), net photosynthesis(–0.84), stomatal conductance(–0.91), transpiration rate(–0.90), and leaf stomatal area(–0.83). A structural equation model(SEM) showed that nitrogen fertilizer was an important factor affecting the rice canopy temperature.Our study revealed:(1) A suite of plant traits was associated with the nitrogen effects on canopy temperature,(2) the heading stage was the best time to observe rice canopy temperature, and(3) at that stage, canopy temperature was negatively correlated with rice yield, panicle number, and grain number per panicle. This study suggests that canopy temperature can be a convenient and accurate indicator of rice growth and yield prediction.

Characteristics and distribution of microstructures in high pressure die cast alloys with X-ray microtomography:A review

Al and Mg alloy high pressure die castings(HPDC)are increasingly used in automotive industries.The microstructures in the castings have decisive effect on the casting mechanical properties,in which the microstructure characteristics are fundamental for the investigation of the microstructure-property relation.During the past decade,the microstructure characteristics of HPDC Al and Mg alloys,especially micro-pores andα-Fe,have been investigated from two-dimensional(2D)to threedimensional with X-ray micro-computed tomography(μ-CT).This paper provides an overview of the current understanding regarding the 3D characteristics and formation mechanisms of microstructures in HPDC alloys,their spatial distributions,and the impact on mechanical properties.Additionally,it outlines future research directions for the formation and control of heterogeneous microstructures in HPDC alloys.

Effect of High Temperature on Outcrossing Characteristics at the Fertility Sensitive Period of Photo-thermo Sensitive Genic Male Sterile (PTGMS) Rice Lines

Four sterile lines （Peiai64S, Y58S, Guangzhan 63-2S and H638S） and the restoring line R527 were used as materials. Five temperature gradients （24, 27, 30, 33 and 36 ℃ in artificial climate chamber） and the natural temperature （as control） were treated to the four sterile lines for 6 d in the fertility sensitive period of heading to flowering stage, respectively, to study the effects of temperature on physiological biochemical characteristics of young panicles and outcrossing characteristics. The results showed that the percentages of exerted stigma of Peiai 64S and Y58S were the highest at 27 ℃, which were 86.81% and 86.06%, respectively, while the percentages of exerted stigma of Guangzhan 63-2S and H638S were the highest at 24 ℃, which were 76.24% and 81.76%, respectively; the stigma viability of Peiai 64S, Y58S, Guangzhan 63-2S and H638S were the best at 24 ℃, which were 1.96, 2.12, 1.74 and 1.94, respectively; the outcrossing rates of Peiai 64S, Guangzhan 63-2S and H638S were the highest at 24 ℃, which were 58.87%, 54.22% and 50.50%, respectively, while the outcrossing rate of Y58S was the highest at 27 ℃, which was 58.96%; and the contents of peroxidase （POD） of the four sterile lines increased significantly at 33 ℃ compared with the control, while the contents of malondialdehyde （MDA） and proline increased significantly at 36 ℃ compared with the control. There were differences in temperature sensitivity between the male sterile lines, and the 24 ℃ treatment during the sensitive period was the best for the fertility sensitive period of Peiai 64S, while 27 ℃ was the best temperature for Y58S, Gangzhan 63-2S and H638S.

Flowering Characteristics of Japonica Rice Male Sterile Lines Adaptive to High Temperature and Summer Drought

[Objective] This study was conducted to screen japonica rice male sterile lines with good flowering characteristics under high temperature and summer drought. [Method] The flowering habits of 23 japonica male sterile lines, such as flowering peak, single-panicle flowering duration, single-plant flowering duration, en- closed glume rate, glume-opening angle, the distance between glumes, stigma exer- tion rate and sigma vitality, were compared with II-32A as a control under above weather condition. [Result] The flowering characteristics had significant difference a- mong the tested rice lines. Compared with the control, three japonica rice male ster- ile lines 35478A, 35489A and 35502A had better flowering traits, such as earlier flowering peak, longer single-panicle flowering duration, longer single-plant flowering duration, lower rate of enclosed glumes, larger glume angle and larger distance be- tween glumes. 35478A performed its flowering peak from 10：00-11：00 am, 1.5 h earlier than the control; 35489A exhibited higher stigma exertion rate, up to 76.23%; and 35502A had higher stigma vitality, up to 84.68%, which kept longer time than that of the CK. [Conclusion] The results will provide high-quality resources for the breeding of new japonica rice varieties with high-yield and high-temperature toler- ance.

Effects of temperature and precipitation on drought trends in Xinjiang, China

The characteristics of drought in Xinjiang Uygur Autonomous Region(Xinjiang),China have changed due to changes in the spatiotemporal patterns of temperature and precipitation,however,the effects of temperature and precipitation—the two most important factors influencing drought—have not yet been thoroughly explored in this region.In this study,we first calculated the standard precipitation evapotranspiration index(SPEI)in Xinjiang from 1980 to 2020 based on the monthly precipitation and monthly average temperature.Then the spatiotemporal characteristics of temperature,precipitation,and drought in Xinjiang from 1980 to 2020 were analyzed using the Theil-Sen median trend analysis method and Mann-Kendall test.A series of SPEI-based scenario-setting experiments by combining the observed and detrended climatic factors were utilized to quantify the effects of individual climatic factor(i.e.,temperature and precipitation).The results revealed that both temperature and precipitation had experienced increasing trends at most meteorological stations in Xinjiang from 1980 to 2020,especially the spring temperature and winter precipitation.Due to the influence of temperature,trends of intensifying drought have been observed at spring,summer,autumn,and annual scales.In addition,the drought trends in southern Xinjiang were more notable than those in northern Xinjiang.From 1980 to 2020,temperature trends exacerbated drought trends,but precipitation trends alleviated drought trends in Xinjiang.Most meteorological stations in Xinjiang exhibited temperature-dominated drought trend except in winter;in winter,most stations exhibited precipitation-dominated wetting trend.The findings of this study highlight the importance of the impact of temperature on drought in Xinjiang and deepen the understanding of the factors influencing drought.

Numerical Analysis of Explosion Characteristics of Vent Gas From 18650 LiFePO_(4) Batteries With Different States of Charge

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries.Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles,thereby promoting the application and development of lithium-ion batteries.Based on this understanding and combined with previous research on gas production from lithium-ion batteries,this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of charge(SOCs).The explosion limit of mixed gases affected by carbon dioxide inert gas is calculated through the“elimination”method,and the Chemkin-Pro software is used to numerically simulate the laminar flame speed and adiabatic flame temperature of the battery vent gas.And the concentration of free radicals and sensitivity coefficients of major elementary reactions in the system are analyzed to comprehensively evaluate the combustion explosion hazard of battery vent gas.The study found that the 100%SOC battery has the lowest explosion limit of the vent gas.The inhibitory elementary reaction sensitivity coefficient in the reaction system is lower and the concentration of free radicals is higher.Therefore,it has the maximum laminar flame speed and adiabatic flame temperature.The combustion and explosion hazard of battery vent gas increases with the increase of SOC,and the risk of explosion is the greatest and most harmful when SOC reaches 100%.However,the related hazards decrease to varying degrees with overcharging of the battery.This article provides a feasible method for analyzing the combustion mechanism of vent gas from lithium-ion batteries,revealing the impact of SOC on the hazardousness of battery vent gas.It provides references for the safety of storage and transportation of lithium-ion batteries,safety protection of energy storage stations,and the selection of related fire extinguishing agents.

Analysis on the Climatic Characteristics of High and Low Temperature in the East of Hexi Corridor in Recent 50 Years

[Objective] The research aimed to provide the certain theory basis for the accurate forecast and early warning of high and low temperature in the east of Hexi Corridor.[Method] Based on the high(the daily highest temperature ≥35 ℃) and low(the daily lowest temperature ≤-20 ℃) temperature data in five observatories in the east of Hexi Corridor during 1960-2009,the temporal and spatial distribution,intensity,continuity and circulation situation of high and low temperature were analyzed in detail by using the statistical method.[Result] The high temperature weather in the east of Hexi Corridor mainly happened in the edge of northeast desert,and the low temperature mainly happened in the mountain zone where the altitude was higher and the edge of north desert.As the climate became warm,the high temperature days showed the weak increase trend,and the intensity strengthened.The low temperature days showed the obvious decrease trend,and the intensity weakened.The high temperature weather mainly occurred in June,August,and the low temperature mainly occurred in January,February,December.The high and low temperature weather had the durative characteristic.The strong high and low temperature mainly occurred in the durative time of high and low temperature.The high temperature weather appeared in the zone where was controlled and affected by the subtropical high.The low temperature weather appeared in the zone where the strong cold air accumulated and invaded.[Conclusion] The research had the extremely important significance on servicing for the agriculture,preventing and reducing the natural disasters,promoting the local economic development.