To maintain tight control over rheological properties of high-density water-based drilling fluids, it is essential to understand the factors influencing the theology of water-based drilling fluids. This paper examines...To maintain tight control over rheological properties of high-density water-based drilling fluids, it is essential to understand the factors influencing the theology of water-based drilling fluids. This paper examines temperature effects on the rheological properties of two types of high-density water-based drilling fluids （fresh water-based and brine-based） under high temperature and high pressure （HTHP） with a Fann 50SL rheometer. On the basis of the water-based drilling fluid systems formulated in laboratory, this paper mainly describes the influences of different types and concentration of clay, the content of a colloid stabilizer named GHJ-1 and fluid density on the rheological parameters such as viscosity and shear stress. In addition, the effects of aging temperature and aging time of the drilling fluid on these parameters were also examined. Clay content and proportions for different densities of brine-based fluids were recommended to effectively regulate the rheological properties. Four theological models, the Bingham, power law, Casson and H-B models, were employed to fit the rheological parameters. It turns out that the H-B model was the best one to describe the rheological properties of the high-density drilling fluid under HTHP conditions and power law model produced the worst fit. In addition, a new mathematical model that describes the apparent viscosity as a function of temperature and pressure was established and has been applied on site.展开更多
The rheological properties of two kinds of oil-based drilling fluids with typically composition were studied at pressures up to 138 MPa and temperatures up to 204 ℃ using the RheoChan 7400 Rheometer.The experimental ...The rheological properties of two kinds of oil-based drilling fluids with typically composition were studied at pressures up to 138 MPa and temperatures up to 204 ℃ using the RheoChan 7400 Rheometer.The experimental results show that the apparent viscosity,plastic viscosity and yield point decrease with the increase of temperature,and increase with the increase of pressure.The effect of pressure on the apparent viscosity,plastic viscosity and yield point is considerable at ambient temperature.However,this effect gradually reduces with the increase of temperature.The major factor influencing the rheological properties of oil-based drilling fluids is temperature instead of pressure in the deep sections of oil wells.On the basis of numerous experiments,the model for predict the apparent viscosity,plastic viscosity and yield point of oil-based drilling fluids at high temperature and pressure was established using the method of regressive analysis.It is confirmed that the calculated data are in good agreement with the measured data,and the correlation coefficients are more than 0.98.The model is convenient for use and suitable for the application in drilling operations.展开更多
Ni0.35Zn0.65Fe2O4 ferrite was synthesized by SHS method. In the process of SHS, combustion temperature and velocity were the main process parameters , which were decided by the Fe content, grain size of the ferrite po...Ni0.35Zn0.65Fe2O4 ferrite was synthesized by SHS method. In the process of SHS, combustion temperature and velocity were the main process parameters , which were decided by the Fe content, grain size of the ferrite powder, relative density and the oxygen pressure. In this paper the effects of Fe content, grain size and oxygen pressure on combustion temperature and velocity were discussed. The relation between combustion temperature and magnetic permeability was also studied and the method of polynomial regression was used to establish the mathematical model of the relation.展开更多
This paper systematically reviews the mathematical modeling based on the computational fluid dynamics(CFD)method of equilibrium and nonequilibrium hypersonic flows.First,some physicochemical phenomena in hypersonic fl...This paper systematically reviews the mathematical modeling based on the computational fluid dynamics(CFD)method of equilibrium and nonequilibrium hypersonic flows.First,some physicochemical phenomena in hypersonic flows(e.g.,vibrational energy excitation and chemical reactions)and the flow characteristics at various altitudes(e.g.,thermochemical equilibrium,chemical nonequilibrium,and thermochemical nonequilibrium)are reviewed.Second,the judgment rules of whether the CFD method can be applied to hypersonic flows are summarized for accurate numerical calculations.This study focuses on the related numerical models and calculation processes of the CFD method in a thermochemical equilibrium flow and two nonequilibrium flows.For the thermochemical equilibrium flow,the governing equations,chemical composition calculation methods,and related research on the thermodynamic and transport properties of air are reviewed.For the nonequilibrium flows,the governing equations that include one-,two-,and three-temperature models are reviewed.The one-temperature model is applied to a chemical nonequilibrium flow,whereas the two-and three-temperature models are applied to a thermochemical nonequilibrium flow.The associated calculations and numerical models of the thermodynamic and transport properties,chemical reaction sources,and energy transfers between different energy modes of the three models are presented in detail.Finally,the corresponding numerical models of two special wall boundary conditions commonly used in hypersonic flows(i.e.,slip boundary conditions and catalytic walls)and related research,are reviewed.展开更多
文摘To maintain tight control over rheological properties of high-density water-based drilling fluids, it is essential to understand the factors influencing the theology of water-based drilling fluids. This paper examines temperature effects on the rheological properties of two types of high-density water-based drilling fluids （fresh water-based and brine-based） under high temperature and high pressure （HTHP） with a Fann 50SL rheometer. On the basis of the water-based drilling fluid systems formulated in laboratory, this paper mainly describes the influences of different types and concentration of clay, the content of a colloid stabilizer named GHJ-1 and fluid density on the rheological parameters such as viscosity and shear stress. In addition, the effects of aging temperature and aging time of the drilling fluid on these parameters were also examined. Clay content and proportions for different densities of brine-based fluids were recommended to effectively regulate the rheological properties. Four theological models, the Bingham, power law, Casson and H-B models, were employed to fit the rheological parameters. It turns out that the H-B model was the best one to describe the rheological properties of the high-density drilling fluid under HTHP conditions and power law model produced the worst fit. In addition, a new mathematical model that describes the apparent viscosity as a function of temperature and pressure was established and has been applied on site.
基金Project(50574061) supported by the National Natural Science Foundation of ChinaProject(IRT0411) supported by the Changjiang Scholars and Innovative Research Team,Ministry of Education
文摘The rheological properties of two kinds of oil-based drilling fluids with typically composition were studied at pressures up to 138 MPa and temperatures up to 204 ℃ using the RheoChan 7400 Rheometer.The experimental results show that the apparent viscosity,plastic viscosity and yield point decrease with the increase of temperature,and increase with the increase of pressure.The effect of pressure on the apparent viscosity,plastic viscosity and yield point is considerable at ambient temperature.However,this effect gradually reduces with the increase of temperature.The major factor influencing the rheological properties of oil-based drilling fluids is temperature instead of pressure in the deep sections of oil wells.On the basis of numerous experiments,the model for predict the apparent viscosity,plastic viscosity and yield point of oil-based drilling fluids at high temperature and pressure was established using the method of regressive analysis.It is confirmed that the calculated data are in good agreement with the measured data,and the correlation coefficients are more than 0.98.The model is convenient for use and suitable for the application in drilling operations.
文摘Ni0.35Zn0.65Fe2O4 ferrite was synthesized by SHS method. In the process of SHS, combustion temperature and velocity were the main process parameters , which were decided by the Fe content, grain size of the ferrite powder, relative density and the oxygen pressure. In this paper the effects of Fe content, grain size and oxygen pressure on combustion temperature and velocity were discussed. The relation between combustion temperature and magnetic permeability was also studied and the method of polynomial regression was used to establish the mathematical model of the relation.
基金Key Laboratory of Hypersonic Aerodynamic Force and Heat Technology of the AVIC Aerodynamics Research Institute,National Natural Science Foundation of China(Grant Nos.31371873,31000665,51176027,and 31300408)Special Program for Applied Research on Super Computation of the NSFC-Guangdong Joint Fund(the second phase)of China and CAST-BISEE(Beijing Institute of Spacecraft Environment Engineering)innovation fund.
文摘This paper systematically reviews the mathematical modeling based on the computational fluid dynamics(CFD)method of equilibrium and nonequilibrium hypersonic flows.First,some physicochemical phenomena in hypersonic flows(e.g.,vibrational energy excitation and chemical reactions)and the flow characteristics at various altitudes(e.g.,thermochemical equilibrium,chemical nonequilibrium,and thermochemical nonequilibrium)are reviewed.Second,the judgment rules of whether the CFD method can be applied to hypersonic flows are summarized for accurate numerical calculations.This study focuses on the related numerical models and calculation processes of the CFD method in a thermochemical equilibrium flow and two nonequilibrium flows.For the thermochemical equilibrium flow,the governing equations,chemical composition calculation methods,and related research on the thermodynamic and transport properties of air are reviewed.For the nonequilibrium flows,the governing equations that include one-,two-,and three-temperature models are reviewed.The one-temperature model is applied to a chemical nonequilibrium flow,whereas the two-and three-temperature models are applied to a thermochemical nonequilibrium flow.The associated calculations and numerical models of the thermodynamic and transport properties,chemical reaction sources,and energy transfers between different energy modes of the three models are presented in detail.Finally,the corresponding numerical models of two special wall boundary conditions commonly used in hypersonic flows(i.e.,slip boundary conditions and catalytic walls)and related research,are reviewed.
基金国家"863"计划"CO2驱油注采工程技术研究"(2009AA063404)国家科技重大专项"大型油气田及煤层气开发"(2008ZX05009-05)加拿大CMG基金会项目"Industrial Research Chair in Non-Conventional Reservoirs Modeling"
