TC4 titanium alloy was friction stir welded using a W-Re pin tool,and the defect-free weld was produced with proper welding parameters.The joint consists of stir zone,heat affected zone and base material.The stir zone...TC4 titanium alloy was friction stir welded using a W-Re pin tool,and the defect-free weld was produced with proper welding parameters.The joint consists of stir zone,heat affected zone and base material.The stir zone is characterized by equiaxed dynamically recrystallized α phases and transformed β phases with fine α+β lamellar microstructure.The microstructure of the heat-affected zone is similar to that of the base material,but there is an increase in the volume fraction of β.Transverse tensile strength of the joint is 92% that of the base material,and the joint is fractured in the stir zone and the fracture surface possesses typical plastic fracture characteristics.The stir zone is the weakest part of the joint,through which the tensile characteristics of the TC4 joint can be explained.展开更多
This study was aimed to determine the mechanical strength of composites made from Agave cantala with an unsaturated polyester matrix and microcrystalline cellulose.Cantala fiber(CF)was treated with 6%Na OH with immers...This study was aimed to determine the mechanical strength of composites made from Agave cantala with an unsaturated polyester matrix and microcrystalline cellulose.Cantala fiber(CF)was treated with 6%Na OH with immersion times of 0 h(UF),3 h(AK3),6 h(AK6),9 h(AK9),and12 h(AK12).Thermogravimetric analysis(TGA)analysis shows that treated CF has higher thermal stability than CF without treatment.Cantala fiber was tested by X-ray diffraction.After alkali treatment with a 6-h soaking,it had a crystallinity index of 73.65%.Scanning electron microscopy(SEM)showed that the fibers were cleaner after alkali treatment because hemicellulose,wax,and other impurities were removed.Examination of the contact angle and surface energy showed that treated CF has smaller contact angles and greater surface energy.展开更多
基金Project(2010CB731704) supported by the National Basic Research Program of ChinaProject supported by the Program of Excellent Team in Harbin Institute of Technology, China
文摘TC4 titanium alloy was friction stir welded using a W-Re pin tool,and the defect-free weld was produced with proper welding parameters.The joint consists of stir zone,heat affected zone and base material.The stir zone is characterized by equiaxed dynamically recrystallized α phases and transformed β phases with fine α+β lamellar microstructure.The microstructure of the heat-affected zone is similar to that of the base material,but there is an increase in the volume fraction of β.Transverse tensile strength of the joint is 92% that of the base material,and the joint is fractured in the stir zone and the fracture surface possesses typical plastic fracture characteristics.The stir zone is the weakest part of the joint,through which the tensile characteristics of the TC4 joint can be explained.
文摘This study was aimed to determine the mechanical strength of composites made from Agave cantala with an unsaturated polyester matrix and microcrystalline cellulose.Cantala fiber(CF)was treated with 6%Na OH with immersion times of 0 h(UF),3 h(AK3),6 h(AK6),9 h(AK9),and12 h(AK12).Thermogravimetric analysis(TGA)analysis shows that treated CF has higher thermal stability than CF without treatment.Cantala fiber was tested by X-ray diffraction.After alkali treatment with a 6-h soaking,it had a crystallinity index of 73.65%.Scanning electron microscopy(SEM)showed that the fibers were cleaner after alkali treatment because hemicellulose,wax,and other impurities were removed.Examination of the contact angle and surface energy showed that treated CF has smaller contact angles and greater surface energy.
